TMW-128 Decal Placement Guide - Taylor Machine Works

Decal No. 3377-134 Decal No. 3377-022DEATH OR SERIOUS INJURY MAY RESULT FROMIMPROPER OPERATION OF THIS MACHINE.Operator must be trained and knowledgeable ofthe Operators Guide, Safety Manual, and OSHAStandard Section 1910-178 for Powered IndustrialTrucks.Capacity is with mast in vertical position andload retracted.Capacity greatly decreases with tilting, highload lifting, acceleration, braking, sharpturning, high wind velocity, and poor yardconditions.Tilt (mast and load out) only when load is overa stack.Visibility may be impaired by structural design.(ALWAYS look in the direction of travel; do not relyon mirrors.)Do not operate with bystanders present.Always travel with load in lowest possibleposition that allows good visibility.Always wear seat belt while machine is inoperation.Do not attempt to jump from machine in event oftip over! Remain seated with seat belt fastened.DANGERSTAY CLEAR Highway 15 North/Louisville, Mississippi 393393377 134Placement of Decal No. 3377-134... Right-hand Side Operator in a location that is easily visible to the operatorat all timesWARNING / DEATH OR INJURYDECAL PART NO. 3377-134TOP VIEW OF SEATDANGER / STAY CLEARDECAL PART NO. 3377-022Placement of Decal No. 3377-022 should be horizontally centered between the Taylor logo and the top of thecounterweight plate (as illustrated) on the rear of the machine.4TMW-128 (01/28/13)