User Manual Lightweight Wheelchair - Aidacare

More documents

Recommendations

Info

LARGE WHEELS 24-INCHThe large wheels on the W18 are fitted with a quick release mechanism. The wheel is removed simply by pushing in thehub button, and pulling the wheel off the frame.On the W16 model, a nut secures the rear wheels and axle. Refer below for removal.The large rear wheel tyres should only be replaced in pairs. Worn and/or under inflated tyres may make the wheelchairdifficult to steer and propel, always maintain correctly inflated tyres in order to minimize these problems and to maximizetyre lifespan.Rear wheels should be inflated to manufacturer’s recommended pressure, refer to sidewall of tyre for correct pressuresettings.To remove large rear wheels (W16 model)• Remove dust cap.• Unscrew the locking nut and unscrew the axle bolt, remove axle bolt.• To reinstall, reverse the above procedure.FORKS AND CASTORSTo remove fork with castor• Remove dust cap.• Unscrew the locking nut and remove fork with attached castor.• To reinstall, reverse the above procedure.CLEANING YOUR WHEELCHAIRWith a regular cleaning routine, you can preserve the appearance of your wheelchair for a very long time. Listed beloware some simple procedures that will make cleaning your wheelchair easier.UPHOLSTERYThe build up of body oils/sweat, hair or fluff can lead to the deterioration of the upholstery. Cleaning should be performedapproximately once a week/fortnight.To Clean• Vacuum upholstery, any staining may be removed with a mild soap and warm water. Stubborn grime may requiregentle scrubbing with a soft brush.• When finished, allow to air dry or dry with a soft cloth.PLEASE NOTENever use furniture polishes, abrasive cleaners or steel wool on this wheelchair as it may severely damage the finish ofthe chair.Regular use of cleaners containing hydrocarbons or similar additives may cause damage to the upholstery and possiblyleading to permanent degradation of the product.We recommend that you replace broken upholstery screws immediately to avoid potential tearing of the vinyl.Ensure stretched, torn or split upholstery is replaced for your safety.FRAMETo Clean• Simply wipe over the frame once a week with a soft cloth and a mild evaporative cleaner such as glass/windowcleaner to remove any prints/smudges, this will restore the frame’s finish.6
GENERAL SERVICINGApproximately every 3 months or so, we recommend that you perform the following routine to maximize the usefullifespan of your wheelchair.• Check castor/rear wheel play, remove dust caps and ensure area around the axle’s locking nut is free of dust anddebris.• Check brakes and adjust if necessary.• Ensure that all nuts and screws on the frame are tight.• Check the large rear Nylon wheels for cracked or broken spokes. The wheel should be replaced immediately.If replacement parts are ever required (such as tyres, tubes, footplates, etc), please contact your nearest K•Care distributorfor pricing and availability of materials.WARRANTY• K•Care warrants our range of wheelchairs for a period of twelve (12) months from date of purchase.• K•Care or an authorised K•Care Distributor must inspect the product within the warranty period. K•Care is not liablefor any costs borne from the shipping of non-conforming product to place of inspection (e.g. distributor address).• K•Care’s warranty does not cover product damaged accidentally through misuse or neglect. K•Care does notwarrant product that has been modified from its original form.• Due to logistical reasons, it is imperative that you contact your place of purchase who will lodge an officialcomplaint/claim on your behalf.K•CARE CONTACT DETAILSHEAD OFFICEK•Care Perth100 Mulgul RoadMalaga WA 6090AustraliaTelephone +61 8 9248 4444Facsimile +61 8 9248 4190Email sales@hillshealthcare.com.auWebsite www.hillshealthcare.com.au7
Page 3 and 4: TRANSPORTING YOUR CHAIRK•Care doe
Page 5: LEG RESTSThe swing away leg rests p

User Manual Lightweight Wheelchair - Aidacare

Create successful ePaper yourself

Delete template?

Save as template?