User Manual - Imtra

More documents

Recommendations

Info

User Manual225 installation procedure5.1 Location of Wiper unit bracketsThe wiper unit is equipped with two fixing brackets. The brackets can either bewelded or bolted to the bulkhead. Note that the standard brackets are made ofaluminium, but mild steel brackets can be ordered as an option.Check the distance between the mounting holes on the end covers of the wiperunit compared with measurements given in Figure 20.The wiper casing should be placed as close to the window frame as possible.Please consult your Decca supplier for project specific CAD drawings.8x for M840 +/- 10 17527BulkheadpenetrationMin 300MotorFor cable Ø13C LWiper stroke + 128 2740 +/- 10 175Wiper stroke lengthWindow widthFigure 20 - Wiper Unit Footprint (all measurements in mm)
23User Manual5.2 Bulkhead penetrationIt is important to mimimize the tension on the cable and the connector. In order toobtain an optimal location of the bulkhead penetration the hole should be drilledaccording to the dimension given in figure 20. The cable has an OD of 13mm. The cablegland for bulkhead penetration is not supplied, and must therefore be sourced byinstaller.Avoid sharp bends or edges, the minimum cable bending radius is 75mm.Protect the connectors from water during installation5.3 Wiper CasingThe wiper unit is mounted to the brackets after installation of cable. The wiper unit isbolted to the brackets using carriage bolts for easy fitting and removal, secured withwashers and self locking nuts.Figure 21 - Wiper Casing Mounting
Page 3: DOCUMENT FRONT SHEETUSER MANUAL0 In
Page 6 and 7: User Manual61 INTRODUCTION1.1 PURPO
Page 8 and 9: User Manual81.3 SYMBOLSThe NOTE sym
Page 10 and 11: User Manual103 main data3.1 Dimensi
Page 12 and 13: User Manual12115182 161.586.5120Fig
Page 15 and 16: 15User ManualTension too lowTension
Page 17 and 18: 17User Manual4.1.4 Thor Electronic
Page 19 and 20: 19User Manual4.2 Typical installati
Page 21: 21User Manual4.3.1 Air Purge System
Page 25 and 26: 25User Manual5.4.2 Electronic Contr
Page 27 and 28: 27User Manual6 System Operation6.1
Page 29 and 30: 29User ManualIdentification Descrip
Page 31 and 32: 31User Manual

User Manual - Imtra

Create successful ePaper yourself

Delete template?

Save as template?