Fluke

Test ToolsCatalogVolume 42, 2012Keeping your worldup and running.

FeaturedproductsEasy HartTransmitterCalibration750 Series DocumentingProcess Calibrators (DPC)The new Fluke 750 Series DPCs improve on thepopular 740 Series DPCs. Improvements include:• Vastly improved display for easy viewing indark, bright lighting and extreme angles• Improved accuracy, especially for RTDsource and measure, replaces the needfor a decade box• Improved connectability for both USBand HART• A great new field softcase• Near identical user interface to 74X, easy to pick up and use• Multifunction and documenting• CAT II 300 V rating makes these DPCs electrically rugged• Three-sigma confidence on specifications means you candepend on the measurements these Fluke DPCs makeFor information on the new 750 Series Documenting ProcessCalibrators see page 36.QuantifyEnergyLosses430 Series II Three-Phase PowerQuality and Energy AnalyzersBest in power quality. First in energy monetization.• Energy loss calculator: Classic active and reactivepower measurements, unbalance and harmonicpower are quantified to pinpoint true systemenergy losses in dollars• Optimized power quality analyzers: 435 and 437Series II analyzers conduct tests according to thestringent international IEC 61000-4-30 Class-A• PowerWave data capture: 435 and 437 Series IIanalyzers capture fast RMS data, show half-cycleand waveforms to characterize electrical systemdynamics (generator start-ups, UPS switching etc.)• Waveform capture: 435 and 437 Series II modelscapture 100/120 cycles (50 Hz/60 Hz) of eachevent that is detected in all modes without setupFor information on the new 430 Series II Power QualityAnalyzers see page 28.

Twist.Test.TL175 TwistGuard Test LeadsAdjustable tip lengths allow users to work in differentCAT rated environments.• TwistGuard test leads have adjustable tip lengthprovides versatility to perform electrical measurementssafely in CAT II, III and IV environments• WearGuard insulation: two layers of silicone insulation,red or black on the outside and white on the inside.When the white insulation is visible, the user has avisual warning that the test leads need to be replaced• Extra-heavy duty strain relief built into both the probeendand the plug-end withstood over 30,000 bendswithout failure• Screw threads at the base of the probes accept threadedFluke alligator clips• Universal input plugs are compatible with any testinstrument that accepts 4 mm shrouded banana plugsFor information on the new TL175 TwistGuard Test Leadssee page 59.190 Series II ScopeMeter ®Portable OscilloscopesScopes built tough to keep up with you,ScopeMeter® test tool now takes you intoCAT IV environments.• 60 MHz, 100 MHz, 200 MHz bandwidth andsample rates up to 2.5 GS/s• Oscilloscope, paperless recorder and multimeterwith isolated inputs• CAT III 1000 V/CAT IV 600 V safety rated• Sealed case, IP 51 rated according to IEC529• Easy access battery door and Li-ion batteryFor information on the new 190 Series II ScopeMetersee page 43.4ChannelTesting

FlukeTest ToolsCatalogVolume 42, 20124ClampMeters8DigitalMultimetersContentsFluke Corporationis the worldleader in compact,professionalelectronic test tools.From industrialmaintenance tocommercial buildingoperations, Fluketools deliverthe testing andtroubleshootingcapabilities to keepglobal commerceand industry up andrunning.18InsulationResistance Testers22Earth GroundTesters20BenchMeters24ElectricalTesters21DistanceMeters25Indoor AirQuality Tools27Power QualityAnalyzers32ProcessCalibration Tools41ScopeMeter®Test Tools45ThermalImaging Tools50TemperatureCalibration52Thermometers54Vibration Tester55Accessorieswww.fluke.com3

Fluke 381 Remote Display True-rmsAC/DC Clamp Meter with iFlexThe world’s most advancedclamp meterThe Fluke 381 Clamp Meter combinesiFlex flexibility with remote readingcapability for the ultimate in innovationand safety.• Remote display reads measurementsup to 30 feet away• iFlex Flexible Current Probeincluded, 18 inch circumference• 2500 A ac current measurementwith iFlex• 1000 A ac and dc current measurementwith fixed jaw• 1000 V ac and dc voltagemeasurement• Frequency measurement to 500 Hz• 60 kΩ resistance measurement• Min/Max/Avg and inrush recording• CAT IV 600 V, CAT III 1000 V• Three-year warrantySee specifications chart on page 7.Recommended accessoriesFluke 381TL175TLK289TwistGuardIndustrial MasterTest LeadsTest Lead SetSee page 59 See page 57C345Large Soft CaseSee page 56FTP-1SureGrip FusedTest Probe SetSee page 59TrueRMSN10140i2500-10 AC8710 inch iFlex® Flexible Heavy Duty Bus BarCurrent ProbeClip SetFluke 365 Detachable JawTrue-rms AC/DC Clamp MeterRecommended accessoriesFluke 365Where rugged meets reliableThe Fluke 365 Clamp Meter offers a small,detachable jaw—with four feet of coil—thatmakes it easy to take and read measurements intight or hard-to-reach places.• 200 A ac and dc current measurement• 600 V ac and dc voltage measurement• 6000 Ω resistance measurement• Built-in flashlight• Large, easy-to-read backlight display• Three-year warrantyFTPL-1TL71SureGrip Fused TestPremiumProbe and Lead SetTest Lead SetSee page 59 See page 59See specifications chart on page 7.TrueRMSN10140C43Small Soft CaseSee page 56TL220SureGrip IndustrialTest Lead SetSee page 57Ordering informationIncluded accessories18-inch iFlex Flexible CurrentProbe, test leads, soft carryingcase, instruction card, safetyinformation sheet, five AAalkaline batteries.Test leads, soft carryingcase, instruction card, safetyinformation sheet, five AAalkaline batteries.ModelsFLUKE-381FLUKE-365Remote Display True-rms AC/DC Clamp Meter with iFlexDetachable Jaw True-rms AC/DC Clamp MeterAC285TL224SureGrip Alligator SureGrip SiliconeClipsInsulated Test LeadsSee page 59 See page 59Check price and availability atwww.fluke.com/wtb-clamps4Clamp MetersFor more information, go to www.fluke.com/clamps

Fluke 370 Series Clamp MetersFluke 376 with iFlexBe ready for anythingOur new family of true-rms clamp metersprovides a range of state of-the-art featuresto meet even the most demandingjob requirements.All four of the new clamp meters haveimproved base features such as a large,backlit display, true-rms standard, CAT IVsafety rating and a durably constructedbody. Additionally, the 376, 375 and 374are compatible with the iFlex ® FlexibleCurrent Probe (included with the 376,sold separately for the 375 and 374), andprovide increased measurement readingsto 1000 A and 1000 V ac and dc.See specifications chart on page 7 fordetails per model.iFlex ® Flexible Current ProbeFluke 375 Fluke 374 Fluke 373TrueRMSN10140Unprecedentedmeasurement flexibilityThe new iFlex Flexible Current Probeexpands the measurement range ofselect Fluke clamp meters to 2500 Aac while providing increased displayflexibility, improved wire access andthe ability to measure awkward-sizedconductors.Available in 18 inch and 10 inchcoil sizes. Visit www.fluke.com/iFlex-18 for additional specs.Quick reference guide conversion tableOld model New model Feature changesFluke 337 Fluke 381 Includes all 337 features plus:• Detachable display• CAT IV 600 V, CAT III 1000 V• iFlex 2500 A ac• 1000 V ac/dcFluke 337 Fluke 376 Includes all 337 features plus:• CAT IV 600 V, CAT III 1000 V • 1000 V ac/dc• iFlex 2500 A ac• mV dcFluke 336 Fluke 375 Includes all 336 features plus:• CAT IV 600 V, CAT III 1000 V • mV dc• Optional iFlex 2500 A ac • 60 kΩFluke 374 Includes all 336 features (except low pass filter) plus:• CAT IV 600 V, CAT III 1000 V • 1000 µF• Optional iFlex 2500 A acFluke 335 Fluke 374 Includes all 335 features plus:• CAT IV 600 V, CAT III 1000 V• Optional iFlex 2500 A acFluke 373• 600 A ac/dc• 1000 µFIncludes all 335 features (except inrush) plus:• CAT IV 300 V, CAT III 600 V • 1000 µFFluke 334 Fluke 374 Includes all 334 features plus:• CAT IV 600 V, CAT III 1000 V• Optional iFlex 2500 A acFluke 373Fluke 333 Fluke 373 Includes all 333 features plus:• CAT IV 300 V, CAT III 600 V• True-rms• True-rms• 600 A ac/dc• 60 kΩ• Min/Max/Avg• 60 kΩ• 1000 µF• 1000 µF• Min/Max/Avg• Min/Max/Avg• Min/Max/Avg• 1000 µF• Min/Max/AvgIncludes all 334 features (except inrush) plus:• CAT IV 300 V, CAT III 600 V • True-rms • 1000 µF• 600 A ac• 6000 Ω• 1000 µFRecommended accessoriesTL223C43SureGrip Electrical Small Soft CaseTest Lead Set See page 56See page 59TL175 i2500-18TwistGuard Test Leads 18 inch iFlex FlexibleSee page 59Current ProbeFor use with the Fluke 375 and 376Ordering informationIncluded accessories18 inch iFlex flexible current probe, test leads, softcarrying case, instruction card, safety informationsheet, two AA alkaline batteries.Test leads, soft carrying case, instruction card, safetyinformation sheet, two AA alkaline batteries.Test leads, soft carrying case, instruction card, safetyinformation sheet, two AA alkaline batteries.Test leads, soft carrying case, instruction card, safetyinformation sheet, two AA alkaline batteries.ModelsFLUKE-376FLUKE-375FLUKE-374FLUKE-373True-rms AC/DC Clamp Meter with iFlexTrue-rms AC/DC Clamp MeterTrue-rms AC/DC Clamp MeterTrue-rms AC Clamp MeterAC285TL224SureGrip Alligator SureGrip SiliconeClipsInsulated Test LeadsSee page 59 See page 59Check price and availability atwww.fluke.com/wtb-clampsFor more information, go to www.fluke.com/clampsClamp Meters5

Fluke 320 Series Clamp MetersFluke 322 Fluke 321N10140Get more doneThe Fluke 321 and 322 are designedto verify the presence of load current,ac voltage and continuity of circuits,switches, fuses and contacts. Thesesmall and rugged clamp meters are ideallysuited for current measurements upto 400 A in tight cable environments.• Precise measurements with 1.8 %basic accuracy• Resolution up to 0.01 A and 0.1 V• Measures ac current 40.00 A/400.0 A• Measures ac and dc volts to 600 V• Resistance measurement to 400 Ω• Continuity for quick checking of shortsSee specifications chart on page 7 fordetails per model.Fluke 902 True-rms HVACClamp MeterJust for our HVAC prosHVAC (heating, ventilation, air conditioning) techniciansrequire a service tool that can consistently keep up withtheir demands. The Fluke 902 expands the existing line ofquality Fluke clamp meters by delivering the features necessaryto diagnose and repair HVAC systems. Combined withtrue-rms technology and a CAT III 600 V rating, the Fluke902 helps technicians do their jobs safely and accurately.• Designed for HVAC applications with capacitance, dccurrent (µA) and temperature measurements• Small body and jaws fit perfectly in your hand and intotight places• Handy “Display Hold” button keeps measurements on thedisplay• Meter controls are positioned so current measurements canbe done with one hand (index finger on clamp openinglever and thumb on rotary switch)• Three-year warrantySpecialty modelsFluke 360 AC LeakageCurrent Clamp MeterThe unique jaw design of the Fluke360 eliminates the influence of adjacentcurrent conductorsand measures leakagecurrent down to 1 μAfor monitoring of insulation.The ergonomicdesign of the Fluke 360ensures easy measuring.The measuringclamp fits into tightspaces and the widedisplay angle clearlyshows the measurementresult. The DataHold button keepsthe measured valueon the display afterremoving the clampfor the measured conductor.Current measurement• Automatic ranging within themanually selected mA or A range• Ranges 3/30 mA and 30/60 A• Current resolution 1 µA/0.01 mAand 0.01 A/0.1 A• Frequency range 50 and 60 Hz• Jaw size: 40 mm (1.55 in) maximumconductor diameter• Auto power offRecommended accessoriesFluke 320 SeriesC43TL175Small Soft Case TwistGuard Test LeadsSee page 56 See page 59TrueRMSSee specifications chart on page 7.N10140TL223L210SureGrip ElectricalProbe LightTest Lead Setand ExtenderSee page 59 See page 61Recommended accessoriesFluke 902Ordering informationIncluded accessoriesModelsTest leads, soft carrying case, instruction card, safety FLUKE-321 Clamp Meterinformation sheet, two AA alkaline batteries.FLUKE-322 Clamp MeterTest leads, temperature probe, soft carrying case, users FLUKE-902 True-rms HVAC Clamp Metermanual, two AA alkaline batteries.Soft carrying case, users manual. FLUKE-360 AC Leakage Current Clamp MeterSoft carrying case, instruction card, safety informationsheet, five AA alkaline batteries.1.5 m silicone rubber test leads, test probes, alligatorclips, soft carrying case, six AA batteries, users manual.FLUKE-353 AC/DC True-rms Clamp Meter, 2000 A,amps onlyFLUKE-355 AC/DC True-rms Clamp Meter, 2000 AC78180PK-8Meter CasePipe ClampSee page 56 See page 61Check price and availability atwww.fluke.com/wtb6Clamp MetersFor more information, go to www.fluke.com/clamps

Fluke 353/355 AC/DCTrue-rms Clamp MetersVersatile, professional, accurateConfidently take reliable readings with the true-rms Fluke355 and 353 Clamp Meters—the tools of choice for highcurrent clamp-on amp meter measurements up to 2000 A.• Reliably handle a wide range of high-current applicationswith 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc• Large 58 mm (2.3 in) jaw• Inrush current measurement• High voltage measurement of 1000 V ac + dc true-rms,600 V ac, and 1000 V dc (355 only)• Resistance to 400 KΩ (355 only)• Continuity beeper (355 only)• Frequency measurement to 1 KHz• Selectable low-pass filter mode• Min/Max/Avg• Large display with backlightRecommended accessoriesFluke 355TL17580TKTwistGuard Thermocouple ModuleTest Leads See page 61See page 59Ordering information on page 6.Fluke 355TrueRMSN10140C345C1600Large Soft CaseGear Tool BoxSee page 56 See page 56Fluke 353Specifications – Clamp metersResidential/commercialelectricalGeneral purpose Industrial electrical HVAC/RHigh-end industrial,utility321 322 365 373 374 375 376 381 902 353 355iFlexaccessoryi2500-10/i2500-18MeasurementsAC current • • • • • • • • • • • • •AC voltage • • • • • • • • • •Resistance • • • • • • • • • •Continuity • • • • • • • • • •DC volts • • • • • • • • •DC current • • • • • • • •True-rms • • • • • • • • • •Frequency • • • • • •AC + DC voltage•AC + DC current • •Min/Max/Avg • • • • • • • •Temperature•Capacitance • • • • • •Special featuresInrush current mode • • • • • • •Low-pass filter • • • • •18 inch iFlex FlexibleCurrent ProbeOptional Optional Included Included10 inch iFlex FlexibleCurrent ProbeOptional Optional Optional OptionalRemote display•Flashlight/torch • •DisplayDisplay hold • • • • • • • • • • • •Backlight • • • • • • • • •SpecificationsJaw opening 1 in 0.7 in 1.3 in 1.3 in 1.2 in 2.3 in 5.7 in/3.2 in 1.5 inMax wire size17 mm750 MCM or500 MCM750 MCM(0.67 in)three 500 MCM1250 MCMCurrent range ac rms 0 to 400.0 A 0 to 200.0 A 0 to 600.0 A 0 to 999.9 A 0 to 600.0 A 0 to 1400 A 0 to 2500 A 0 to 60 AAccuracy ac current(50/60 Hz)1.8 % ± 5 counts 2 % ± 5 counts 1.5 % ± 5 counts3 %± 5 countsLeakage3601 %± 5 countsAC response Averaging True-rms True-rms True-rms True-rms True-rms True-rms True-rms True-rms True-rms True-rms AveragingCurrent range dc 0 to 200 A 0 to 600.0 A 0 to 999.9 A 0 to 200 µA 0 to 2000 AAccuracy dc current 2 %± 5 counts2 % ± 5 counts1 %± 5 counts1.5 % ± 5 countsVoltage range ac 0 to 600.0 V 0 to 1000 V 600.0 V 0 to 600.0 VAccuracy ac voltage2 % ± 5 1 % ± 51 % ± 51 % ± 51.2 % ± 5 counts1.5 % ± 5 countscounts countscountscountsVoltage range dc 0 to 600.0 V 0 to 1000 V 0 to 600.0 V 0 to 1000 VAccuracy dc voltage 1 % ± 5counts2 % ± 5counts1 % ± 5 countsResistance range 0 to 400 Ω 0 to 6000 Ω 0 to 60 kΩ 0 to 9999 Ω 0 to 400 KΩFrequency500 Hz 5 to 1000 Hz 500 Hzmeasurement range1 % ± 5countsFor more information, go to www.fluke.com/clampsClamp Meters7

Pick the right digital multimeter for youDigital multimeter selection guideModelsBest forHighestaccuracy289Data loggingIndustrialtroubleshooting87VVariable speeddrivesIP 67Industrial28 IIHarshenvironmentsBuilt-inthermometer179Everyday useRemoteDisplay233Perform two-manjobs aloneBuildingmaintenance117Wide variety ofelectrical workHVAC/R116HVACtroubleshootingInsulationMultimeter1587Troubleshootingand preventivemaintenanceBasic featuresTrue-rms readings AC+DC AC AC AC AC AC AC ACBasic dc accuracy 0.025 % 0.05 % 0.05 % 0.09 % 0.25 % 0.5 % 0.5 % 0.09 %Wide bandwidth 100 kHz 20 kHz 20 kHzAuto/manual ranging • • • • • • • •Digits 4-1⁄2 4-1⁄2 4-1⁄2 3-1⁄2 3-1⁄2 3-1⁄2 3-1⁄2Counts 50000 20000 20000 6000 6000 6000 6000 6000MeasurementsVoltage ac/dc 1000 V 1000 V 1000 V 1000 V 1000 V 600 V 600 V 1000 VCurrent ac/dc 10 A 10 A 10 A 10 A 10 A 10 A 600 µA 400 mAResistance 500 MW 50 MW 50 MW 50 MW 40 MW 40 MW 40 MW 50 MWFrequency 1 MHz 200 kHz 200 kHz 100 kHz 50 kHz 50 kHz 50 kHz 100 kHzCapacitance 100 mF 10 mF 10 mF 10 mF 10 mF 10 mF 10 mF 10 mFTemperature +1350 °C +1090 °C +1090 °C +400 °C +400 °C +400 °C +500 °CdB60 dBConductance 50 nS 60 nS 60 nSDuty cycle/pulse width • •⁄– •⁄–Motor drive measurements/lowpass filter• • • •Continuity with beeper/diode test• • • • • • • •Low ohms (50 W)•DisplayDual display•Analog bargraph • • • • • •Backlight • • • • • • • •Remote display•Data storage and exchangeMin/Max recording Time stamp • • • • • • •Fast Min/Max 250 µs 250 µs 250 µsDisplay Hold/Auto (Touch)Hold• • • • • • •Relative reference • • •PC interface•Data logging•Readings memory 10,000Other featuresAutomatic selection, LoZ • • •Insulation test range0.01 MW to 2 GWNon-contact ac voltagedetector•Real-time clock•Overmolded case, integratedholster• • •Removable holster • • • • •ToolPak compatibility • • • • • • •Closed case calibration/separate battery door• • • • • • • •Completely sealed/watertight•Automatic power off • • • • • • • •Low battery indication • • • • • • • •Operating temperatureranges–20 °C, +55 °C –20 °C, +55 °C –40 °C, +55 °C –10 °C, +50 °C –10 °C, +50 °C –10 °C, +50 °C –10 °C, +50 °CIP rating IP 42 IP 30 IP 67 IP 42 IP 42 IP 30Warranty and electrical safetyWarranty Limited lifetime Limited lifetime Limited lifetime Limited lifetime Three-years Three-years Three-years Three-yearsInput alert • • •Dangerous voltageindication• • • • • • • •CAT III measurements 1000 V 1000 V 1000 V 1000 V 1000 V 600 V 600 V 1000 VCAT IV measurements 600 V 600 V 600 V 600 V 600 V 600 VSee page 11 12 10 13 9 14 15 178 Digital MultimetersFor more information, go to www.fluke.com/dmm

Fluke 289 and 287 True-rmsLogging MultimetersTrueRMSFeaturesMade inthe U.S.A.of U.S. andnon U.S.partsFind little problems before they become big onesThe Fluke 289 and 287 are the next generation in highperformance industrial logging multimeters.• Large 50,000 count,1/4 VGA dot matrixdisplay with whitebacklight• Logging functionwith expanded memoryfor unattended monitoringTrendCapture displays V dc logged data.of signals over time. Usingon-board TrendCapture,users can graphically review logged readings withoutneeding a PC. Store up to 10,000 recorded events• Save, name, and recall multiple logging sessionsbefore PC download is necessary• Zoom on trend, provides unprecedented ability toview and analyze TrendCapture data; zoom in up to14 times• Two terminal 50 ohm range with 1 milliohm resolution,10 mA source current. Useful for measuring andcomparing differences in motor winding resistance orcontact resistance (289)• Low-pass filter for accurate voltage and frequencymeasurements on adjustable speed motor drives andother electrically noisy equipment (289)N10140Recommended accessoriesTLK289TLK287IndustrialElectronicTest Lead SetTest Lead SetSee page 57 See page 57TPAKi410Magnetic Meter Hanger AC/DC Current ClampSee page 64 See page 63TL175C280TwistGuard Test LeadsSoft CaseSee page 59 See page 56Recommended kits287 289Multiple on screen displays • •True-rms ac bandwidth 100 kHz 100 kHzdBV/dBm • •DC mV resolution 1 μV 1 μVMegohm range up to 500 MΩ 500 MΩConductance 50.00 nS 50.00 nSContinuity beeper • •Elapse time clock/time of day clock • •Min/Max/Avg/duty cycle/pulse width • •Isolated optical DMM interface with• •USB PC connectionAuto/touch hold • •Over 200 hours logging capacity with• •new power saving functionLo Ohm capability — •Lo Z volts — •Lo Pass Filter — •Limited lifetime warranty • •289/FVF kit includes:• True-rms industrial logging multimeter withTrendCapture• FlukeView Forms Software and cable• Temperature probe• Silicone test lead set• Alligator clips• Meter hanging accessory• Soft caseSpecificationsFunctions Range and resolution Basic AccuracyAC volts or dc volts 50.000 mV, 500.00 mV, 5.0000 V, 50.000 V,500.00 V, 1000.0 VAC current dc current500.00 µA, 5000.0 µA, 50.000 mA, 400.00 mA,5.0000 A, 10.000 AOrdering informationIncluded accessoriesTest leads, alligator clips,holster, 9 V battery (installed),users manual on CD, gettingstarted guide.ModelsFLUKE-289FLUKE-287FLUKE-289/FVFFLUKE-287/FVFTrue-rms Industrial Logging Multimeter with TrendCaptureTrue-rms Electronics Logging Multimeter with TrendCapture0.025 %0.4 % (true-rms) (AC)0.15 %0.7 % (true-rms)Temperature (excluding probe) -200.0 °C to 1350.0 °C (-328.0 °F to 2462.0 °F) 1.0 %Resistance50.000 Ω, 500.00 Ω, 5.0000 kΩ, 50.000 kΩ, 500.00 kΩ, 5.0000 MΩ, 0.05 %50.00 MΩ, 500.0 MΩCapacitance1.000 nF,10.00 nF, 100.0 nF, 1.000 µF, 10.00 µF, 100.0 µF, 1000 µF,1.0 %10.00 mF, 100 mFFrequency 99.999 Hz, 999.99 Hz, 9.9999 kHz, 99.999 kHz, 999.99 kHz .005 %True-rms Industrial Logging Multimeter Combo Kit with TrendCaptureTrue-rms Electronics Logging Multimeter Combo Kit with TrendCapture287/FVF kit includes:• True-rms electronic logging multimeter withTrendCapture• FlukeView Forms Software and cable• Temperature probe• Modular test leads (red, black)• Modular test probes (red, black)• Alligator clips (red, black)• Soft caseCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/dmm Digital Multimeters 9

Fluke 87V Industrial MultimeterFor industrial productivityThe Fluke 87V has measurement functions, troubleshootingfeatures, resolution and accuracy to solveproblems on motor drives, in-plant automation, powerdistribution and electro-mechanical equipment.• Unique function for accurate voltage and frequencymeasurements on adjustable speed motor drives andelectrically noisy equipment (87V and 28 II Ex)• Large digit display with bright two level backlightmakes the 87V significantly easier to read• Measure 20 A for up to 30 seconds, 10 A continuously• Optional magnetic hanger for easy setup and viewingwhile freeing your hands for other tasks (TPAK)• Expanded capacitance range to 10,000 µFElectrical safetyAll inputs are protected to CAT III 1000 V and CAT IV600 V. They can withstand impulses in excess of8,000 V to help protect you from arc blast resultingfrom surges and spikes.Available in intrinsically safe version as theFluke 28 II Ex.Recommended accessoriesTPAKTL220MagneticSureGrip IndustrialMeter HangerTest Lead SetSee page 64 See page 57TL175i400TwistGuard Test Leads AC Current ClampSee page 56 See page 62Also available as 83V average respondingmultimeter, see below for specifications.Made inthe U.S.A.of U.S. andnon U.S.partsTrueRMSN10140C43CXT80Small Soft CaseExtreme CaseSee page 56 See page 56FeaturesFeatures 28 II Ex 87V 83VPeak capture to record transients as fast as 250 µs • •Measure up to 1000 V ac and dc • • •Auto and manual ranging for maximum flexibility • • •Analog bargraph • • •Frequency to 200 kHz and % duty cycle • • •Min/Max and average recording to capture variations automatically • • •Relative mode to remove test lead resistance from low ohms measurements • • •Access door for fast battery changes without breaking the calibration seal • • •Limited lifetime warranty Three-year • •AC285TL224SureGrip Alligator SureGrip SiliconeClipsInsulated Test LeadsSee page 59 See page 59Recommended kitsSpecificationsBasic accuracyFunctionsRange and resolution87V83VDC volts 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V 0.05 % 0.1 %AC volts 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V 0.7 % (true-rms) 0.5 %DC current 600.0 µA, 6000 µA, 60.00 µA, 600.O mA, 6.000 A, 10.00 A 0.2 % 0.4 %AC current 600.0 µA, 6000 µA, 60.00 µA, 600.O mA, 6.000 A, 10.00 A 1.0 % (true-rms) 1.2 %Temperature (excl. probe) -200 °C to 1090 °C (-328 °F to 1994 °F) 1.0 % —80BK Temperature Probe -40 °C to 260 °C (-40 °F to 500 °F) 2.2 °C or 2 % —Resistance 600.0 W, 6.000 kW, 60.00 kW, 600.0 kW, 6.000 MW, 50.00 MW 0.2 % 0.4 %Capacitance 10.00 nF, 100.0 nF, 1.000 µF, 10.00 µF, 100.0 µF, 9,999 µF 1.0 % 1.0 %Frequency 199.99 Hz, 1.9999 kHz, 19.999 kHz, 199.99 kHz 0.005 % 0.005 %Battery life: 400 hours typical with backlight off. Size (LxWxD): 201 mm x 98 mm x 52 mm (7.9 in x 3.8 in x 2 in).Weight: 355 g (22 oz).Fluke 87V/E2 Industrial Electrician’s Combo Kit• Industrial multimeter• 1.5 m silicone test leads• Removable probes with 4 mm of exposed metal foruse on industrial circuits• Retractable long reach alligator clips• Meter hanging accessory• Type K temperature probe• Soft caseOrdering informationIncluded accessoriesTest leads, alligator clips, holster, batteries(installed), temperature probe (87V only), usersmanual on CD, operator’s guide.ModelsFLUKE-87-5FLUKE-83-5FLUKE-28 II ExFLUKE-87-5/E2Industrial True-rms Multimeter with TemperatureIndustrial MultimeterIntrinsically Safe True-rms MultimeterIndustrial Electrician’s Combo KitCheck price and availability atwww.fluke.com/wtb10Digital MultimetersFor more information, go to www.fluke.com/dmm

Fluke 27 II/28 II Industrial IP 67Digital MultimetersThe 27 II and 28 II Digital Multimeters are designedfor tough work environments. Both meters haveIP 67 waterproof and dustproof rating. They bothhave an extended operating temperature rangeof -15 °C to + 55 °C (5 °F to 131 °F) and 95 %humidity.• Unique function for accurate voltage andfrequency measurements on adjustable speedmotor drives and other electrically noisyequipment (28 II)• Built-in thermometer conveniently allows youto take temperature readings without having tocarry a separate instrument (28 II)• Hi-resolution 20,000 count display mode (28 II)• Resistance and continuity. Relative mode toremove test lead resistance from low ohmsmeasurements• Large digit display with bright, two-levelbacklight• Backlit keypad buttons allow for easy visibilityin low-lit areas• Optional magnetic hanger for easy setup andviewing freeing your hands for other tasks• U.S. Mine Safety and Health Administration(MSHA) approvedSpecialty modelsFluke 28 II ExIntrinsically SafeTrue-rms MultimeterSee page 40 for moreinformation.Recommended accessoriesTPAKTLK-225MagneticSureGrip MasterMeter HangerAccessory SetSee page 64 See page 57TrueRMSMade inthe U.S.A.of U.S. andnon U.S.partsN10140United States Department of LaborMSHAMine Safety and Health AdministrationFeatures27 II 28 IITested to withstand a 3 m (10 ft) drop • •Wide 1000 V measurement range • •True-rms ac voltage and current for accurate measurements on non-linear signals — •Lo Pass Filter — •Temperature — •Average responding voltage and current measurements • —10 A continuous (20 A for 30 seconds) • •Frequency and capacitance • •Record signal fluctuations using the Min/Max function • •SpecificationsSpecification 27 II 28 IIDC voltage Range 0.1 mV to 1000 VAccuracy 0.05 % +1 0.05 % + 1AC voltage Range 0.1 mV to 1000 VAccuracy 0.5 % +3 0.7 % +4DC current Range 0.1 µA to 10 AAccuracy 0.2 % + 4 0.2 % + 4AC current Range 0.1 µA to 10 AAccuracy 1.5 % + 2 1.0 % + 2Resistance Range 0.1 Ω to 50 MΩDisplay counts 6000 6000/19,999Capacitance 1 nF to 9999 µFFrequency0.5 Hz to 199.99 kHzTemperature -200 °C to +1090 °CLow pass filter (measurement on VSD’s)YesComplianceCAT IV 600 V, CAT III 1000 VMeasurement method Avg. responding True-rmsPowerThree AA batteriesBattery life800 hoursDimensions (DxWxH)2.5 in x 3.93 in x 7.8 inWeight with holster698.5 g (1.54 lb)PV350i410Pressure-Vacuum Module AC/DC Current ClampSee page 65 See page 62CXT80C550Extreme Hard CaseTool BagSee page 56 See page 56TL175TL225TwistGuard Stray Voltage AdapterTest LeadsTest Lead KitSee page 59i2000 FLEXC25AC Current ClampMeter CaseSee page 62 See page 56Ordering informationIncluded accessoriesTest leads, temperature probe, alligatorclips, batteries, holster, users manual.ModelsFLUKE-27-IIFLUKE-28-IIIndustrial MultimeterIndustrial MultimeterCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/dmm Digital Multimeters 11

Fluke 179 Digital MultimeterFor maintenance and field serviceThe Fluke 179 True-rms Multimeter has the featuresneeded to find most electrical and HVAC problems.Simple to use with significant improvements over theoriginal Fluke 70 Series.• Wide 1000 V measurement range• True-rms for precise measurement of non-linearsignals• Capacitance, resistance, continuity and frequency• Built-in thermometer (Fluke 179 only)• Large, easy-to-read display• Backlight for work in dimly lit areas(Fluke 177 and 179 only)• Min/Max/Avg to record signal fluctuations• Display hold and auto hold• Manual and automatic rangingElectrical safetyAll inputs are protected to measurement CAT III 1000 Vand CAT IV 600 V. This meter can withstand transientimpulses in excess of 8000 V to help protect you fromarc blasts resulting from surges and spikes.Also available the 175 and 177 multimeters, seebelow for specifications.Specialty Recommended models accessoriesTPAKTL81AMagneticDeluxe ElectronicMeter HangerTest Lead SetSee page 64 See page 57TL175i410Recommended TwistGuard Test Leads accessoriesAC/DC Current ClampSee page 59 See page 62Made inthe U.S.A.of U.S. andnon U.S.partsTrueRMSCXT170C25Extreme Hard CaseMeter CaseSee page 56 See page 56Recommended kitsFeaturesFeatures 179 177 175Max voltage 1000 1000 1000True-rms • • •Temperature • — —Basic dc accuracy 0.09 % 0.09 % 0.15 %Backlight • • —Min/Max/Avg • • •ToolPak meter hanging kit with magnet Opt Opt OptLimited lifetime warranty • • •SpecificationsFunctions Range and resolution Best accuracyDC voltage± 0.09 % (Models 177 and 179)600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V± 0.15 % (Model 175)AC voltage1 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V ± 1.0 % of readingDC current 60.00 mA, 400.0 mA, 6.000 A, 10.00 A 2 ± 1.0 % of readingAC current 2 60.00 mA, 400.0 mA, 6.000 A, 10.00 A 2 ± 1.5 % of readingResistance 600.0 W, 6.000 kW, 60.00 kW, 600.0 kW, 6.000 MW, 50.00 MW ± 0.9 % of readingCapacitance 1000 nF, 10.00 µF, 100.0 µF, 9999 µF ± 1.2 % of readingFrequency 3 99.99 Hz, 999.9 Hz, 9.999 Hz, 99.99 kHz ± 0.1 % of readingTemperature (Model 179) -40 ºC to +400 ºC (-40 ºF to +752 ºF) 1.0 % of reading1 All ac voltage and ac current ranges are specified from 5 % of range to 100 % of range.2 10 A continuous, 20 A for up to 30 seconds.3 Voltage frequency is specified from 2 Hz to 100 kHz. Current frequency is specified from 2 Hz to 30 kHz.Battery life: 200 hours typical for alkaline.Size (HxWxL): 4.3 cm x 9.0 cm x 18.5 cm (1.7 in x 3.5 in x 7.3 in).Ordering informationIncluded accessoriesTest leads, 9 V battery (installed) andmanual. The Fluke 179 comes withan additional temperature probe.ModelsFLUKE-179FLUKE-175FLUKE-177FLUKE-179/1AC-IIFLUKE-179/EDA2Digital MultimeterDigital MultimeterDigital MultimeterElectricians Combo KitElectronics Combo Kit179/EDA2 Electronics Multimeter andDeluxe Accessory Combo Kit• True-rms digital multimeter• Electronic test probes• SureGrip silicone test leads• SureGrip heavy duty hook clips• Type K temperature probe• Recommended Meter hanging accessory kits• Soft case179/1AC-II Electrician’s Multimeter andVoltage Tester Combo Kit• True-rms digital multimeter• Non-contact voltage detector• Alligator clips• SureGrip test probes• Silicone test leads, 1.5 m• Type K temperature probe• Meter hanging accessory• Soft caseCheck price and availability atwww.fluke.com/wtb12Digital MultimetersFor more information, go to www.fluke.com/dmm

Fluke 233 Remote DisplayDigital MultimeterThe Fluke 233 Remote Display Digital Multimeter allowsyou to be in two places at once. The removable displaysolves several problems. First, you no longer haveto hold both the meter and the test leads to make ameasurement. It also allows you to measure where themeasurement point is separated from controls or wherethe operator can’t stay close to the meter during measurementsdue to various hazards or moving machinery.• Wireless technology allows the display to be carriedup to 30 feet away from the point of measurement foradded flexibility• The removable magnetic display can be convenientlymounted where it is easily seen• Low-power 802.15.4 wireless technology does notinterfere with measurement accuracy• Use as a conventional multimeter when the display isconnected• True-rms ac voltage and current• Built-in thermometer• Auto power off maximizes battery life (400 hours)• Radio transmitter automatically turns off when thedisplay is connected to the meter• Record signal fluctuations using the Min/Max functionRecommended accessoriesTPAKTL220MagneticSureGrip IndustrialMeter HangerTest Lead SetSee page 64 See page 5780PK-22i400sSureGrip ImmersionAC CurrentTemperature ProbeClampSee page 60 See page 6280AK-AAC285Thermocouple Adapter SureGrip Alligator ClipsSee page 60 See page 59TrueRMSMade inthe U.S.A.of U.S. andnon U.S.partsN10140Recommended kitsFeaturesFeaturesMeasure up to 1000 V ac and dcMeasure up to 10 A (20 A for 30 seconds)10,000 μF capacitance rangeFrequency to 50 kHzResistance, continuity and diode testMin/Max and average recording to capture variations automaticallyThree-year warrantySpecificationsFunctionsSpecificationsDC voltage Range 0.1 mV to 1000 VAccuracy 0.25 % + 2AC voltage Range 0.1 mV to 1000 VAccuracy 1.0 % + 3DC current Range 0.1 mA to 10 AAccuracy 1.0 % + 3AC current Range 0.1 mA to 10 AAccuracy 1.5 % + 3Resistance Range 0.1 Ω to 40 MΩCapacitance 1000 nF to 9999 µFFrequency0.1 Hz to 50.00 kHzTemperature-40 °C to +400 °C (-40 °F to 752 °F)PowerThree AA batteries main body, two AA batteries display moduleBattery life400 hoursComplianceCAT IV 600 V , CAT III 1000 VSize (HxWxL)5.3 cm x 5.3 cm x 19.3 cm (2.08 in x 2.08 in x 7.6 in)Weight604 g (1.3 Ib)TL175TLK289TwistGuard Test Leads SureGrip IndustrialMeter HangerTest Lead SetSee page 59 See page 57TP175FTP-1TwistGuardSureGrip FusedTest ProbesTest Probe SetSee page 59 See page 59TL224C35SureGrip Silicone Soft Carrying CaseInsulated Test Leads See page 56See page 59C101C781Hard CaseMeter CaseSee page 56 See page 56Ordering informationIncluded accessoriesTest leads, temperature probe,alligator clips, batteries, usersmanual.ModelsFLUKE-233Remote Display MultimeterCheck price and availability atwww.fluke.com/wtbDigital Multimeters13

Fluke 117 and 115True-rms Digital MultimetersThe Fluke 117 Digital Multimeter includes integratednon-contact voltage detection to help get the job donefaster. The Fluke 115 Digital Multimeter is the solutionfor a wide variety of electrical and electronic testingapplications.• VoltAlert technology for integrated non-contactvoltage detection (117)• AutoVolt feature for automatic ac/dc voltage selection(117)• LoZ: Low input impedance prevents false readingsdue to “ghost voltage” (117)• Large display and white LED backlight to work inpoorly lit areas more effectively• Compact ergonomic design for one-handed operation• Min/Max/Avg to record signal fluctuations• Compatible with optional magnetic hanger (TPAK) forhands free operation• Current measurement 20 A (30 secondsmomentary; 10 A continuous)• Resistance, continuity, frequencyand capacitanceFluke 117 Fluke 115Specialty modelFluke 113• Basic electrical andutility multimeter• VCHEK LoZ lowimpedance measurementfunction tosimultaneously test forvoltage or continuity• True-rms for accurateac measurements onnon-linear loads• Record signal fluctuations using theMin/Max function• Diode and capacitance measurements• Integral holster with probe holdersfor easy storage• Auto and manual ranging for addeduser functionality• Meets CAT IV 600 V standards for ahigher level of safetyTrueRMSRecommended accessoriesFeaturesFeatures 117 115 113VoltAlert detector • — —AutoVolt/LoZ • — LoZAnalog bargraph • • •Large backlit digital display • • •True-rms for accurate measurements on non-linear loads • • •Min/Max recording • • •Display hold • • •3-1⁄2 digits • • •6000 counts • • •CAT III 600 V safety rated • • •Three-year warranty • • •SpecificationsTPAKTL220MagneticSureGrip IndustrialMeter HangerTest Lead SetSee page 64 See page 57TL175C115TwistGuard Test Leads Soft Carrying CaseSee page 59 See page 56Recommended kitsFunctions 117 115 113 AccuracyVolts ac/dc 600 V 600 V 600 V 0.5 % + 2Current ac/dc 10 A 10 A — 1.0 % + 3Resistance 40 MW 40 MW 60 kW 0.9 % + 2Capacitance 1 nF to 9,999 µF 1 nF to 9,999 µF — 1.9 % + 2Diode test Yes Yes Yes —Frequency 5 Hz to 50 kHz 5 Hz to 50 kHz — 0.1 % + 2Ordering informationIncluded accessoriesTest leads, holster, usersmanual and 9 V battery(installed).ModelsFLUKE-117FLUKE-115FLUKE-113FLUKE-117/322Multimeter with Non-Contact VoltageMultimeterUtility MeterElectrician’s Combo Kit117/322 Electrician’s Combo Kit• True-rms digital multimeter withnon-contact voltage detection• Compact clamp meter• Test lead set• Magnetic meter hanging strap• Deluxe carrying case with shoulder strapCheck price and availability atwww.fluke.com/wtb14Digital MultimetersFor more information, go to www.fluke.com/dmm

Fluke 116 and 114 Digital MultimetersHVAC/R and electrical troubleshootingThe Fluke 116 Digital Multimeter was specificallydesigned for the HVAC professional. The Fluke 114Digital Multimeter is the best troubleshooting tool for“go/no-go” testing.• Built in thermometer for HVAC applications (116)• Microamps to test flame sensors (116)• AutoVolt: Automatic ac/dc voltage selection (114)• LoZ: Helps prevent false readings due to ghost voltage• Min/Max/Avg to record signal fluctuations• Resistance, continuity, frequency and capacitance• Large white LED backlight to work in poorly lit areas• Compact ergonomic design for one-handed operation• Compatible with optional magnetic hanger (TPAK)Recommended accessoriesFluke 11680AK-ADMM AdapterSee page 6080PK-22SureGrip ImmersionTemperature ProbeSee page 6080PK-880PK-27Pipe ClampSureGrip IndustrialTemperature ProbeSurface ProbeSee page 61 See page 60Recommended kitsFluke 116Fluke 114TrueRMSFeaturesFeatures 116 114Temperature • —Microamps • —Frequency • —Capacitance • —Diode test • —AutoVolt/LoZ • •Analog bargraph • •Large backlit digital display • •True-rms for accurate measurements on non-linear loads • •Min/Max recording • •Display hold • •3-1⁄2 digits • •6000 counts • •CAT III 600 V safety rated • •Three-year warranty • •116/322 HVAC Combo Kit• HVAC multimeter with temperature and microamps• Compact clamp meter• Test lead set• Pipe wrap thermocouple• Thermocouple adapter• Thermocouple bead probe• Meter hanging accessory• Deluxe carrying case with shoulder strapSpecificationsFunctions Range and resolution Best accuracyVolts ac/dc 600 V 0.5 % + 2Current ac/dc (116 only) 600.0 µA 1.0 % + 2Temperature (116 only) +400 °C 1.0 % + 18Resistance 40 MW 0.9 % + 2Capacitance (116 only) 1 nF to 9,999 µF 1.9 % + 2Frequency (116 only) 5 Hz to 50 kHz 0.1 % + 2Ordering information116/62 HVAC Combo Kit• HVAC multimeter with temperature and microamps• Infrared thermometer• Test lead set• Pipe wrap thermocouple• Thermocouple adapter• Type K integrated temperature probe• Magnetic meter hanging strap• Deluxe carrying case with shoulder strapIncluded accessoriesTest leads, integrated temperature probe (116 only),holster, users manual and 9 V battery (installed).ModelsFLUKE-116FLUKE-114FLUKE-116/62FLUKE-116/322HVAC Multimeter with Temperature and MicroampsElectrical MultimeterHVAC Combo KitHVAC Combo KitCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/dmm Digital Multimeters 15

Fluke 88V and 77 IV Digital MultimetersFor automotive, field service or bench repairFluke 88V Automotive MultimeterThe Fluke 88V Automotive Multimeter is designed tohelp automotive professionals solve problems faster.This DMM has the measurement functions, troubleshootingfeatures and accuracy to solve virtually any problemwith conventional and hybrid vehicles.• Automotive test functions include dc and ac voltage,resistance and current• Min/Max recording for logging the highest and lowestreadings over time• Frequency measurements for magnetic sensors andac/dc frequency signals• Duty cycle for variable duty cycle signals with selectabletrigger, slope and level• Pulse width for fuel injector on-time measurements• Conductance testing for secondary ignition coils• RPM measurements for DIS and conventional ignitionsystems• Built-in thermometerRecommended accessoriesFluke 88VTLK281TLK282AutomotiveDeluxe AutomotiveTest Lead KitTest Lead KitSee page 57 See page 57Fluke 77 IVMade inthe U.S.A.of U.S. andnon U.S.partsTPAKi400Magnetic Meter Hanger AC Current ClampSee page 64 See page 62Fluke 77 IV Digital MultimeterThe Fluke 77 IV Digital Multimeter has the features neededto repair most electrical and electronic problems. Thismeter is simple to use and has significant improvementsover Fluke’s original 70 Series with more measurementfunctions, conformance to the latest safety standards, anda much larger display that is easier to view.• Wide 1000 V measurement range• Average responding ac measurements• 0.3 % accuracy• 10 amps continuous• Frequency and capacitance• Resistance and continuity• Large display• Backlight for work in dim areas• Min/Max to record signal fluctuations• Integral holster with probe holders• Free your hands with the optional TPAK magnetichanger• Auto and manual rangingTL175TLK-225TwistGuardSureGrip MasterTest LeadsAccessory KitSee page 59 See page 57i2000 FlexC35AC Current Clamp Soft Carrying CaseSee page 62 See page 56Recommended kitsMade inthe U.S.A.of U.S. andnon U.S.partsSpecifications88V77IVV dc 1000 V 1000 VV ac 100 V 100 VA dc 10 A 10 AA ac 10 A 10 AResistance 50 MΩ 50 MΩCapacitance 9,999 μF 9,999 μFFrequency 200.00 kHz 99.99 kHzDuty Cycle 99.9 % —Temperature 1994.0 °F (1090 °C) —Conductance 60.00 nS —88V/A Combo Kit• Automotive multimeter• Heat resistant silicone test leads• Removable sharp point test probes• Large jaw alligator clips• Temperature probe• Inductive pick-up• Automotive backprobe pins• Insulation piercing probe• Meter hanging accessory• Durable carrying caseOrdering informationIncluded accessoriesTest leads, users manual and 9 V battery(installed).ModelsFLUKE-88-5FLUKE-77-4FLUKE-88-5/A KITAutomotive MultimeterDigital MultimeterAutomotive Multimeter Combo KitCheck price and availability atwww.fluke.com/wtb16Digital MultimetersFor more information, go to www.fluke.com/dmm

Fluke 1587 and 1577Insulation MultimetersFluke 1587Two powerful tools in oneThe Fluke 1587 and 1577 Insulation Multimeters combinea digital 1 kV insulation tester with a full-featured,true-rms digital multimeter in a single compact, handheldunit, which provides maximum versatility for bothtroubleshooting and preventive maintenance.• Insulation test (1587: 0.01 MΩ to 2 GΩ) (1577: 0.1 MΩ to600 MΩ)• Insulation test voltages (1587: 50 V, 100 V, 250 V, 500 V,1000 V), (1577: 500 V, 1000 V) for many applications• Live circuit detection prevents insulation test if voltage> 30 V is detected for added user protection• Auto-discharge of capacitive voltage for added userprotection• Filter for motor drive measurements (1587 only)• AC/DC voltage, dc millivolts, ac/dc milliamps, resistance(Ω), and continuity• Capacitance, diode test, temperature,Min/Max, and frequency (Hz) (1587 only)• Auto power off to save battery power• Large display with backlight and largedigits• Included accessories: Remote probe, testleads and probes, alligator clips, (Type Kthermocouple, 1587 only)• Accepts optional Fluke TPAK magnetichanging system to free your hands forother work• Rugged, utility hard case allows you tobring everything you need for the jobFluke 1577Recommended accessoriesTPAKi400Magnetic Meter Hanger AC Current ClampSee page 64 See page 62C100Universal Carrying CaseSee page 56Recommended kitsTL27Heavy DutyTest LeadsGet more value and productivityEstablishing a preventive maintenance program isbecoming critical to maintaining the uptime of electricalequipment and can significantly reduce both plannedand unplanned downtime. Unplanned downtime costsare difficult to calculate, but are often significant. Forsome industries, it can represent 1 % to 3 % of revenue(potentially 30 % to 40 % of profits) annually.These kits can help you be proactive and efficient withyour maintenance and can save you up to 10 % off theindividual price of the tools.TrueRMSN10140SpecificationsFeatures 1587 1577 1507 1503Insulation test voltages 50 V, 100 V,250 V, 500 V, 1000 V• — • —Insulation test voltages 500 V, 1000 V — • — •Insulation resistance 0.01 MW to 2.0 GW 0.1 MW to 600 MW 0.01 MW to 10 GW 0.1 MW to 2 GWAuto-discharge of capacitive voltage • • • •Insulation test smoothing reading • — — —Frequency • — — —Capacitance • — — —Diode test • — — —Temperature • — — —Min/Max • — — —Low-pass filter (for work on VSDs) • — — —AC/DC voltage • • — —DC millivolts • • — —AC/DC milliamps • • — —Resistance 0.1 W to 50 MW 0.1 W to 50 MW 0.1 W to 20.00 KW 0.1 W to 20.00 KWContinuity • • —Warranty Three-year Three-year One-year One-yearRemote probe, test leads, alligator clips • • • •Type K thermocouple • — — —Rugged, utility hard case • • • •Auto power off • • • •Page number 17 17 24 24Ordering informationFluke 1587/ET Advanced ElectricalTroubleshooting Kit includes:• Fluke 1587 Insulation Multimeter• Fluke i400 Current Clamp• Fluke 62 Mini Infrared ThermometerFluke 1587/MDT Advanced Motor and DriveTroubleshooting Kit includes:• Fluke 1587 Insulation Multimeter• Fluke i400 Current Clamp• Fluke 9040 Phase Rotation IndicatorIncluded accessoriesRemote probe, test leads,alligator clips, Type Kthermocouple (1587 only), hardcase and users manual.ModelsFLUKE-1577FLUKE-1587FLUKE-1587/ETFLUKE-1587/MDTInsulation MultimeterInsulation MultimeterAdvanced Electrical Troubleshooting KitAdvanced Motor and Drive Troubleshooting KitCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/dmm Digital Multimeters 17

Fluke 1507/1503 InsulationResistance TestersThese lightweight, affordable insulation testers are perfectfor troubleshooting, commissioning and preventive maintenanceapplications.Features• Automatic calculation of polarization index and dialectricabsorption ratio (1507 only)• Multiple test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V(1507 only)• Remote test probe for rapid testing• Insulation test range 0.01 MΩ to 10 GΩ (1507), 0.1 MΩ to2000 MΩ (1503)• Compare (Pass/Fail) function for repetitive tests(1507 only)• Live circuit detection prevents insulationtest if voltage > 30 V is detected• Auto-discharge of capacitive voltage• AC/DC voltage: 0.1 V to 600 V• Lo ohms/Earth-bond continuity(200 mA) for checking connectionsand motor windings• Resistance: 0.01 Ω to 20.00 Ω• One-year warrantyRecommended accessoriesTPAKTL27Magnetic Meter Hanger Heavy Duty Test Lead SetSee page 64C116C101Soft Carrying CaseHard CaseSee page 56 See page 56Fluke 1507N10140Fluke 1503Selection guideFeatures 1555 1550C 1507 1503 1587 1577Insulation test voltages 50 V,100 V, 250 V, 500 V, 1000 V— — • — • —Insulation test voltages500 V, 1000 V— — — • — •Insulation test voltages: Userselectable 250 V to 5000 V— • — — — —Insulation test voltages: Userselectable 250 V to 10,000 V• — — — — —Insulation resistance0.01 MΩ to 0.1 MΩ to 0.01 MΩ to 0.1 MΩ to2 TΩ 1 TΩ10 GΩ 2 GΩ 2.0 GΩ 600 MΩAuto-discharge of capacitivevoltage• • • • • •Insulation test smoothingreading— — — — • —Frequency — — — — • —Capacitance • • — — • —Diode test — — — — • —Temperature — — — — • —Min/Max — — — — • —Low-pass filter (for workon VSDs)— — — — • —AC/DC voltage — — — — • •DC millivolts — — — — • •AC/DC milliamps — — — — • •Resistance— —0.1 Ω to20.00 KΩ0.1 Ω to20.00 KΩ0.1 Ω to50 MΩContinuity — — • •Warranty (years) 3 3 1 1 3 3Remote probe, test leads,alligator clips• • • • • •Type K thermocouple — — — — • —Rugged, utility hard case • • • • • •Auto power off • • • • • •Page number 25 25 24 24 17 170.1 Ω to50 MΩ360AC Leakage CurrentClamp MeterSee page 6Ordering informationIncluded accessoriesModelsRemote probe, silicone test leads, test FLUKE-1507Insulation Testerprobes, large alligator clips, holster,users manual.FLUKE-1503Insulation TesterSoft carrying pouch, users manual. FLUKE-360 AC Leakage Current Clamp MeterCheck price and availability atwww.fluke.com/wtb18Insulation Resistance TestingFor more information, go to www.fluke.com/1507

1555 and 1550C InsulationResistance TestersN10140Powerful troubleshooting andpredictive maintenance toolsThe new Fluke 1555 and redesigned Fluke1550C insulation resistance testers offerdigital insulation testing up to 10 kV, makingthem ideal for testing a wide range ofhigh voltage equipment including switchgear,motors, generators and cables.• Test voltages up to 5 kV (1550C) and10 kV (1555) provide solutions for allapplications• Warning function alerts the user that linevoltage is present and gives a voltagereading up to 600 V ac or dc for increaseduser safety• Measurements can be stored in up to 99memory locations, and each location isassigned a unique, user-defined label foreasy recall• Long battery life gives the user over 750tests between changes• Automatic calculation of Dielectric Absorption(DAR) and Polarization Index (PI) withno additional setup• Guard system eliminates the effect of surfaceleakage current on high-resistancemeasurements• Large digital/analog LCD for easy viewing• Capacitance and leakage currentmeasurement• Ramp function for breakdown testing• Three-year warrantyRecommended accessoriesFluke 1550CTLK1550-RTLCFVF-BasicIntegral Test Lead FlukeView Forms Softwareand 10 kV Clamp See page 65IR189USBUSB-IR CableSee page 65Recommended kitsCXT1555Pelican Carrying Case1550C/Kit includes:• 5 kV insulation resistance tester• Ruggedized 10 kV alligator clips with integralsilicone, dual extruded leads• Test leads with large alligator clips• IP67 hard carrying case• USB-IR cable• NIST traceable certificate of calibrationSpecificationsThe tester’s accuracy is specified for one year after calibration at operating temperatures of 0 °C to 35 °C. For operating temperaturesoutside the range (-20 °C to 0 °C and 35 °C to 50 °C), add ± .25 % per °C, except on the 20 % bands add ± 1 % per °C.Insulation resistance measurementTest voltage (dc) Range Accuracy (± reading)250 V < 200 kΩ200 kΩ to 5 GΩ5 GΩ to 50 GΩ> 50 GΩ500 V < 200 kΩ200 kΩ to 10 GΩ10 GΩ to 100 GΩ> 100 GΩ1000 V < 200 kΩ200 kΩ to 20 GΩ20 GΩ to 200 GΩ> 200 GΩ2500 V < 200 kΩ200 kΩ to 50 GΩ50 GΩ to 500 GΩ> 500 GΩ5000 V < 200 kΩ200 kΩ to 100 GΩ100 GΩ to 1 TΩ> 1 TΩ10000 V (1555 only) < 200 kΩ200 kΩ to 200 GΩ200 GΩ to 2 TΩ> 2 TΩunspecified5 %20 %unspecifiedunspecified5 %20 %unspecifiedunspecified5 %20 %unspecifiedunspecified5 %20 %unspecifiedunspecified5 %20 %unspecifiedunspecified5 %20 %unspecified1555/Kit includes:• 10 kV insulation resistance tester• Ruggedized 10 kV alligator clips with integralsilicone, dual extruded leads• Test leads with large alligator clips• IP67 hard carrying case• Logging software• USB-IR cable• NIST traceable certificate of calibrationFunctions Range Accuracy (± reading)Leakage current 1 nA to 2 mA ± (5 % + 2 nA)Capacitance measurement 0.01 uF to 15.00 µF ± (15 % rdg + 0.03 µF)Live circuit indicator 30 V to 600 V ac/dc, 50/60 Hz ± (5 % + 2 V)Ordering informationIncluded accessoriesTest leads with alligator clips, ruggedized alligator clips(kits and 1555 only), infrared adapter with interfacecable, FlukeView Forms software, ac power cord, softcarrying case, quick reference guide, users manual.ModelsFLUKE-1550CFLUKE-1550C/KitFLUKE-1555FLUKE-1555/Kit5 kV Insulation Tester5 kV Insulation Tester Kit10 kV Insulation Tester10 kV Insulation Tester KitCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/1550Insulation Resistance Testing19

Fluke 8846A/8845A/8808APrecision Bench MultimetersFluke 8846ATrueRMSFluke 8845AFluke 8846A/8845A 6.5 DigitPrecision MultimetersThese digital multimeters perform the functionsyou would expect to see in a multifunctionDMM, including measuring volts, ohms andamps. Basic V dc accuracy of up to 0.0024 %,10 A current range, and a wide ohms rangegive you an unbeatable combination of measurementcapability.Extend the meters’ utility even more withtheir graphical display modes, includingTrendplot paperless recorder mode, statisticsand histograms—features you won’t find onother multimeters• 6.5 digit resolution• Up to 0.0024 % accuracy• Graphical analysis modes: TrendPlot,Histogram, and Statistics• Dual measurement inputs: front/rear• Dual measurement display• Wide measurement ranges• IEEE, LAN, RS-232 interfaces• USB memory device port (8846A)• TL2X4 wire measurement techniqueSample screensFluke 8846A/8845ABuilt-in TrendPlot graphically plotsextent of drift and intermittent events.Critical measurement statistics areconveniently displayed together.Histogram mode can reveal stability ornoise problems.Fluke 8808ATrueRMSFluke 8808A 5.5 Digit MultimeterThe Fluke 8808A multimeter has a broad rangeof functions, measuring volts, ohms and ampswith a basic V dc accuracy of 0.015 %. Themeter is easy to use and include innovativefunctions to simplify routine testing andprecision 4 wire resistance measurements.• 5.5 digit resolution• Up to 0.015 % accuracy• Dual measurement display• Sensitive dc leakage current ranges• Front panel setup keys• TL2X4 wire measurement techniquePerform two interrelated measurementslike volts and amps, or volts ac andfrequency (and 8808A).Measure sensitive dc currents accuratelyusing unique design that minimizesmeasurement error due to shunt burdenvoltages (8808A only).SpecificationsRecommended accessoriesFluke 8808A Fluke 8845A 8846ADisplay Dual Dual, graphicalResolution (digits) 5.5 6.5MeasurementsBasic V dc accuracy(% Reading + % Range)Advanced measurements/functionsV ac, V dc, I dc, I ac, W, Cont,V ac, V dc, I dc, I ac, W, Cont, DiodeDiode0.015 + 0.003 0.0035 + 0.0005 0.0024 + 0.00052x4 wire ohms, freq,i-Leakagededicated setup keys2x4 wire ohms, freq, period2x4 wire ohms, freq, period,capacitance, temp (RTD)Math Null, dBm, dB, Min, Max Null, dBm, dB, Min, Max, Ave, Std Deviation, MX+BAnalysis Limit Compare Limit Compare, TrendPlot, Histogram, StatisticsUSB memory device port No No YesInterfaces RS-232, USB via optional adapter RS-232, IEEE-488.2, LAN, USB via optional adapterSafety rating CAT I 1000 V, CAT II 600 V CAT I 1000 V, CAT II 600 VOrdering informationTL2X4W-TWZ2x4-Wire OhmsTweezers Test LeadsY8846DRack Mount Kit,DualTL2X4W-PTII2x4-Wire OhmsTest LeadIncluded accessoriesPower cord, test lead set, programmersmanual/users manual on CD, FVF-BASIC,FlukeView Forms Software Basic Version.Test leads, line cord, getting started guide,users manual on CD.ModelsFLUKE-8846AFLUKE-8845AFLUKE-8808A6.5 Digit Precision Multimeter, 24 ppm USB memory6.5 Digit Precision Multimeter, 35 ppm5.5 Digit MultimeterCheck price and availability atwww.fluke.com/wtb20Bench MultimetersFor more information, go to www.fluke.com/884X

Fluke 421D, 416D and 411DLaser Distance MetersFluke laser distance meters offer the most advanced measuringtechnology available. Unlike ultrasonic distance meterswith laser pointers, these meters use a precision narrow laserbeam that helps avoid the common errors caused by extraneousobjects near measurement targets.• Eliminate estimation errors, saving both time and money• Instant measurement with one-button operation• Easy targeting with bright laser• Quick calculation of area (square footage) and volume• Easy addition and subtraction of measurements• Two-year warrantyRecommended kits411D/62 Kit• Fluke 411D Laser Distance Meter• Fluke 62 Mini Thermometer• Soft pouch for each modelFluke 421DSpecificationsFluke 416DFluke 411DFeatures Fluke 421D Fluke 416D Fluke 411DRange (for extended distances, usea target plate)*0.05 m to 100 m(0.16 ft to 330 ft)0.05 m to 60 m(0.16 ft to 200 ft)0.1 m to 30 m(0.33 ft to 100 ft)Measuring accuracy** ± 1.5 mm (± 0.059 in) ± 1.5 mm (± 0.059 in) ± 3 mm (0.118 in)Laser class II II IILaser type 635 nm, < 1 mW 635 nm, < 1 mW 635 nm, < 1 mWAutomatic power off After 180 seconds after 180 seconds after 180 secondsContinuous measure ment • • •Addition/subtraction • • •Battery life up to 5,000 measurements up to 3,000 measurements up to 3,000 measurementsLCD illumination • • —Data locations 20 10 —Min/Max • • —Audible feedback • • —Pythagoras (Indirect measurement) Full Full SimpleRoom angle and stakeout • — —± 45 ° Tilt sensor/indirect measure • — —Ingress protection IP54 IP54 IP40Dimensions127 mm x 52 mm x 29 mm(5.00 in x 2.06 in x 1.13 in)135 mm x 46 mm x 31 mm(5.31 in x 1.81 in x 1.22 in)123 mm x 50 mm x 26 mm(4.84 in x 1.97 in x 1.02 in)Weight 125 g (4.40 oz) 110 g (3.88 oz) 150 g (5.29 oz)Temperature rangeStorageOperation-25 °C to 70 °C(-13 °F to 158 °F)0 °C to 40 °C(32 °F to 104 °F)-25 °C to 70 °C(-13 °F to 158 °F)0 °C to 40 °C(32 °F to 104 °F)-25 °C to 70 °C(-13 °F to 158 °F)0 °C to 40 °C(32 °F to 104 °F)Operating altitude (ISO 9022) up to 3500 m up to 3500 m up to 3500 mStorage humidity (at 35 °C) maximum 85 % for 24 h maximum 85 % for 24 h maximum 85 % for 24 hBatteries AAA (2) AAA (2) AAA (2)Other productsFluke 9040 RotaryField IndicatorThe Fluke 9040 isa premium phaserotation testerwith a CAT III600 V rating.The frequencyrange is from15 Hz to 400 Hzfor demanding applications. The clearliquid crystal display and the holstermake it suitable for rough outdoorapplications. This instrument issupplied with three unique, expandabletest probes that fit most sockets.Includes a two-year warranty.For more information, go towww.fluke.com/9040Recommended accessoriesAC90Replacement Alligator ClipSet for Fluke 9040 and 9062wide 2.5 cm (1 in)jaw opening* In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, suchas intensive sunshine, very weak reflecting target surface, or large temperature fluctuations, measuring accuracy maydeteriorate to approx. ± 0.25 mm/m (± 0.003 in/ft) for distances above 10 m (33 ft).** In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, such asintensive sunshine, very weak reflecting target surface, or large temperature fluctuations, the deviation over distances 10m (33 ft) can increase by approx. ± 0.15 mm/m (± 0.0018 in/ft).Ordering informationIncluded accessoriesModelsTwo AAA batteries, users manual on CD,quick start guide, nylon carrying case.FLUKE-421DFLUKE-416DLaser Distance MeterLaser Distance MeterFLUKE-411DLaser Distance MeterFLUKE-411D/62411D Laser Distance Meter and 62 IR Thermometer KitThree self-retaining test probes (black),alligator clip, users manual.FLUKE-9040Rotary Field IndicatorCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/distanceLaser Distance Meters21

Fluke 1625 and 1623Geo Earth Ground TestersFluke 1625Fluke 1623The Fluke 1625 and 1623 Earth GroundTesters not only measure ground resistanceusing the classic “fall of potentialtest,” but also enable time saving testingusing “selective” and “stakeless” methods.“Selective” testing does not require theelectrode under test to be disconnectedduring the measurement, thus increasingsafety. The simple “stakeless” methodquickly checks ground connections usingtwo current transformers (probes) clampedaround the ground conductor under test.Offering “one-button” simplicity, the 1623is an all-in-one earth ground tester, whilethe 1625 has extra versatility for moredemanding applications.The 1623 is perfect for performingpredictive maintenance checks ofcommercial and industrial applications.The 1625 is intended for electrical utilityor other electrically noisy environments.Earth ground resistance and soilresistivity should be measured when:• Designing earth ground systems• Installing new ground system andelectrical equipment• Periodically testing ground andlightning protection systems• Installing large electrical equipmentsuch as transformers, switchgears,machines, etc.Recommended accessoriesEI-1623EI-1625Selective/stakeless Selective/stakelessclamp set for 1623 clamp set for 1625ES-162P3Stake/reel set for3-pole measurementsEI-162BNSplit Core Transformerfor use with Fluke 1625Recommended kitsES-162P4Stake/reel set for4-pole measurementsSpecificationsFeatures 1625 1623 1621One-button measurement concept — • •3-pole earth ground measurement • • •4-pole earth ground measurement • • —4-pole soil resistivity testing • • —2-pole resistance measurement ac • • •2-and 4-pole resistance measurement dc • — —Selective testing, no disconnection of ground conductor (1 clamp) • • —Stakeless testing, quick ground loop testing (2 clamps) • • —Measuring frequency 128 Hz — • •Earth impedance measurement at 55 Hz • — —Automatic frequency control (AFC), 94 Hz to 128 Hz • — —Measuring voltage switchable 20 V/48 V • — —Programmable limits, settings • — •Continuity with buzzer • — —Dust/water resistance IP 56 IP 56 IP 40Safety rating CAT II 300 V CAT II 300 V CAT II 600 VTwo-year warranty • • •* In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, suchas intensive sunshine, very weak reflecting target surface, or large temperature fluctuations, measuring accuracy maydeteriorate to approx. ± 0.25 mm/m (± 0.003 in/ft) for distances above 10 m (33 ft).** In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, such asintensive sunshine, very weak reflecting target surface, or large temperature fluctuations, the deviation over distances10 m (33 ft) can increase by approx. ± 0.15 mm/m (± 0.0018 in/ft).Fluke 1625 Kit• Fluke 1625 tester• Two test leads• Four earth ground stakes• Three cable reels with wire (2-25 m, 1-50 m)• Two clamps (one inducing, one sensing)• Rugged carrying caseOrdering informationIncluded accessoriesModelsTest leads, alligator clips, users manual. FLUKE-1625 Advanced GEO Earth Ground TesterFLUKE-1623Basic GEO Earth Ground TesterTest leads, alligator clips, stake/reel set 4-pole, FLUKE-1625 KITAdvanced GEO Earth Ground Tester Kitselective/stakeless clamp set, rugged carrying case,users manual.FLUKE-1623 KITBasic GEO Earth Ground Tester KitThese products are for unpowered installations measuring grounding connections.Fluke 1623 Kit• Fluke 1623 tester• Two test leads• Four earth ground stakes (2 m to 25 m)• Three cable reels with wire(2 m to 25 m, 1 m to 50 m)• Two clamps (one inducing, one sensing)• Rugged carrying caseCheck price and availability atwww.fluke.com/wtb22Earth Ground TestersFor more information, go to www.fluke.com/egt

Fluke 1621 Basic Earth Ground TesterEarth ground tester for resistance measurementThe Fluke 1621 Earth Ground Tester is a rugged, easy-tousetester for three-pole ground resistance measurementsand two-pole ac resistance measurements.Earth ground resistance is measured by installingearth ground test electrodes, and testing with the Fluke1621. Earth ground resistance measurements are usedto ensure safe operation and reduce power qualityproblems. With a simple user interface and intuitivefunctionality, the large, clear LCD display provides highvisibility results in daylight or poor lighting conditions.The 1621 is lightweight making it ideal to test forlightning protection levels and periodic check-ups duringroutine maintenance.• Three-pole earth resistance measurements• Two-pole ac resistance measurements• AC/DC voltage measurement• Large dual backlit display• Limit settings for automatic measurement evaluation• CAT II 600 V• Two-year warrantyFeature comparison on page 22.Recommended accessoriesCable Reel 50 m Cable Reel 25 mGround/earth wire Ground/earth wire(162.5 ft) (81.25 ft)ES-162P3Earth StakeStake/reel set forGround/earth3-pole measurementsstakeRecommended kitsFluke 1630 Earth GroundClamp MeterThe Fluke 1630 Earth Ground Clamp Meter is able to measureground loop resistances—using the stakeless testing method.This test technique eliminates the dangerous, and time consumingactivity, of disconnecting parallel grounds, as well asthe process of finding suitable locations for auxiliary groundstakes. You can also perform earth ground tests in places youhave not considered before: inside buildings, on power pylonsor anywhere you don’t have access to soil.With the stakeless testing method, the Fluke 1630 EarthGround Clamp Meter is placed around the earth ground rod orthe connecting cable. No earth ground stakes are used at all.A known voltage is induced by one half of the clamp and thecurrent is measured by the other half. The tester automaticallydetermines the ground loop resistance at this groundingconnection. Gone are the days of spending time placing andconnecting stakes for each earth ground rod on your system—amajor time saver.• Quick and easy use—no earth ground stakes are necessary• Large, 35 mm (1.35 in) jaw opening• Measures ground resistance from 0.025 Ω to 1500 Ω• Measures ground leakage current from 0.2 mA to 30 A• High and low alarming• Automatic self calibration• Rugged carrying case and resistance check loop included• Two-year warrantyFluke 1621 Tester• Two cable reels with wire (1-50 m, 1-25 m)• Three earth ground stakes• One test lead (red and black 2 m)• Two alligator clips• Hard carrying caseOrdering informationIncluded accessoriesModelsTwo measuring leads with alligator clips, 2 m FLUKE-1621 Basic Earth Ground Tester(6 ft), yellow protective holster, 9 V alkalinebattery (LR61), users manual, CD.1-50 m cable reel, 1-25 m cable reel, 3 earth FLUKE-1621 KIT Basic Earth Ground Tester Kitstakes, 2 test leads, 2 alligator clips, carryingcase, yellow protective holster, 9 V alkalinebattery (LR61), users manual, CD.Rugged carrying case with belt, resistance FLUKE-1630 Earth Ground Clamp Metertest loop, 9 V battery, users manual.These products are for unpowered installations measuring grounding connections.Check price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/egtEarth Ground Testers23

Fluke T5, T+PRO, T+ ElectricalTesters and VoltAlert Fluke T+PRO Fluke T5-1000Fluke LVD2Fluke 1AC-IIFluke 2ACFluke T+PRO andT+ Electrical Testers• Three forms of ac/dc voltage detection:Light, sound and vibration• Detects live voltage even whenbatteries are dead• Extra heavy-duty, replaceable testleads• Rotary field indicator for troubleshootingthree-phase systems• Continuity beeper, LED flashlightand GFCI tripFluke T5 Voltage, Continuityand Current Testers• Excellent front-line troubleshootingand measurement tool• Available in 600 V and 1000 V models• Digital display• OpenJaw current measurement• Rotary switch selects volts, ampsand ohms functions• Heavy-duty test leadsFluke VoltAlert FamilyThe next generation VoltAlert acnon-contact voltage testers from Flukeare easy to use. Electricians, maintenance,service and safety personnel,and homeowners can quickly test forenergized circuits in the workplace orat home. Certified up to CAT IV 1000 V.Recommended accessoriesH5Electrical Tester HolsterSee page 56T5 KitC520AStarter KitPremium Leather HolsterSee page 57 See page 56Recommended kitsT+PRO-1AC Kit• T+PRO Electrical Tester• 1AC-II VoltAlertT5-RLST5 ReplacementTest LeadsSpecificationsFunctions T+PRO T+ T5-1000 T5-600Measure ac/dc voltage Preset 12 V, 24 V, 48 V, 120 V, 208 V,240 V, 277 V (Canada 347 V), 480 V, 600 V1000 V 600 VMeasure ac current (average) — — 100 A 100 AMeasure continuity Yes Yes < 25 W < 25 WMeasure resistance 9.99 kW — 1000 W 1000 WDC polarity indicator — — Yes YesDetachable probe tips withoptional probe tips stylesYes Yes Yes YesDigital display Yes No Yes YesSafety rating CAT IV 600 V/CAT III 1000 VCAT IV 600 V/CAT III 1000 V1000 V OvervoltageCAT III600 V OvervoltageCAT IIIWarranty Two-year Two-year Two-year Two-year*Voltage levels will vary depending on country of intended use.Functions 2AC 1AC-II 1LAC-II LVD2Voltage range 90 V ac to1000 V ac 90 V ac to1000 V ac 20 V ac to 90 V ac 90 V ac to 600 V acAudible alert — • • •Flashlight — — — •On/Off Always on • • •Safety rating CAT IV 1000 V CAT IV 1000 V CAT IV 1000 V CAT IV 600 VOrdering information62/T+PRO/1AC-II Kit• 62 Non-contactThermometer• T+PRO Electrical Tester• 1AC-II VoltAlert• Carrying caseT5-1000 Tester Kit• T5-1000 Voltage ElectricalTester• 2AC VoltAlertVoltage Detector• H5 HolsterVoltAlert Multi PackIncludes five Fluke VoltAlert voltage detectors.The special kit pricing gets you the fifth VoltAlert free.Included accessoriesThe T+ and T+PRO come with attachedtest probes, lead wrap, users manual.The T5-1000 and T5-600 come withdetachable probes and instruction sheet.ModelsT+PRO and T+PRO CAN Electrical TesterT+ and T+ CAN Electrical TesterT+PRO-1AC KITElectrical Tester and AC Voltage Detector KitT+PRO CAN-1AC KIT Electrical Tester and AC Voltage Detector Kit62-T+PRO-1AC KIT IR Thermometer, Electrical Tester and AC VoltageDetector KitT5-1000 1000 V Voltage, Continuity and Current TesterT5-600 600 V Voltage, Continuity and Current TesterT5-H5-1AC KITVoltage, Continuity and Current Tester Kit2ACVoltAlert Voltage Detector2AC 5PKVoltAlert Voltage Detector 5 Pack1AC-IIVoltAlert Voltage Detector1AC-II 5PKVoltAlert Voltage Detector 5 Pack1LAC-IIVoltAlert Voltage DetectorLVD2Volt LightCheck price and availability atwww.fluke.com/wtb24Electrical TestersFor more information, go to www.fluke.com/electricaltesters

Fluke 975 AirMeter Simple, one-touch air velocityThe Fluke 975 AirMeter combines five powerful airquality tools into one. Identify and diagnose indoorair quality issues quickly and easily with one rugged,handheld device.• Simultaneously measures, logs and displaystemperature, humidity, CO 2 and CO on a bright,backlit LCD display• % of outside air calculation• One-touch air flow and velocity with availableprobe*• Dew point and wet bulb temperature• CO 2 and CO field calibration feature• Min/Max/Avg on all measured and calculatedreadings• Audible and visual threshold alarms• Extensive discrete or continuous data loggingcapacity, downloadable to PC via USB interface• Includes NIST-traceable certificate of calibration• Automatically compensates for barometric pressurechanges• Two-year warranty*Included with Fluke 975V, optional with Fluke 975.Recommended accessoriesFluke 975VPAirMeter Velocity Probe for use with Fluke 975 AirMeter.Recommended kitsFluke 975V• 975 AirMeter• Calibration cap• Air velocity probe• FlukeView® Forms software• Power adapter• International power plugs• Hard carrying case• Three AA alkaline batteries• Users manual with safety informationSpecifications975 features Range Display resolution AccuracyTemperature± 0.9 °C/± 1.62 °F from 40 °C to 60 °C ± 0.5 °C/-20 °C to 50 °C0.1 °C (0.1 °F)± 1.00 °F from 5 °C to 40 °C ± 1.1 °C/± 1.98 °F(-5 °F to 122 °F)from -20 °C to 5 °CRelative humidity 10 % to 90 % RH1 % ± 2 % RH (10 % RH to 90 % RH)non-condensingAir velocityFluke 922 Airflow Meter/MicromanometerMake airflow measurements easy by combining differential pressure, airflow and velocity into a single, rugged meter. Used with any pitot tube,the Fluke 922 is the perfect entry point for technicians measuring airflow for the first time, yet powerful enough for advanced users.• Measures differential and static pressure, air velocity and flowreadings• User-defined duct shape and size for maximum airflow accuracy• Bright, backlit display• Min/Max/Avg/Hold functions• Auto power off50.0 fpm to 3000 fpm0.25 m/sec to 15 m/sec1 fpm (0.005 m/sec)± 4 % or 4 fpm* ± 4 % or 0.02 m/sec* whichever isgreater * Accuracy specification only valid for velocityreadings above 50 fpmCO 2 Warm up time 1 min (5 minutes for full specification)0 ppm to 5000 ppm 1 ppm2.75 % + 75 ppmCO± 5 % or ± 3 ppm, whichever is greater,0 ppm to 500 ppm 1 ppm@ 20 °C and 50 % RHFluke 922/Kit• 922 Airflow meter• 12 inch pitot tube• Two rubber hoses• TPak magnetic strip• TPak strap, 9 inches• TPak latch tab• Four AA 1.5 V alkaline batteries• Users manual• Hard carrying case922 features Range AccuracyAir pressure± 1 % + 1 Pascal / ± 1 % + 0.01 in H2O /± 4000 Pascals / ± 16 in H2O / ± 400 mm H2O /± 1 % + 0.1 mm H2O / ± 1 % + 0.01 mbar /± 40 mbar / ± 0.6 PSI± 1 % + 0.0001 PSIAir velocity 250 fpm to 16,000 fpm (1 to 80 m/s) ± 2.5 % of reading at 2000 fpm (10.00 m/s)Air flow (volume) 0 to 99,999 cfm; 0 to 99,999 m 3/hr; 0 to 99,999 l/s Accuracy is a function of velocity and duct sizeTemperature 0 °C to 50 °C (32 °F to 122 °F) 0.1 °C (0.1 °F)Data storage99 readingsWarrantyTwo-yearPowerFour AA batteriesOrdering informationIncluded accessoriesModelsFLUKE-975FLUKE-975VCalibration cap, air velocity probe (Fluke 975V only), FlukeView® Formssoftware, power adapter, international power plugs, hard carrying case,three AA alkaline batteries, users manual with safety information.Two rubber hoses, soft carrying case, four AA alkaline batteries 1.5 V,users manual.12 inch pitot tube, two rubber hoses, ToolPak Magnetic Meter Hanging Kit,hard carrying case, four AA alkaline batteries 1.5 V, users manual.AirMeterAirMeter with VelocityFLUKE-922FLUKE-922/KITAirflow MeterAirflow Meter KitCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/IAQIndoor Air Quality25

Power quality toolsFor industrial and commercial applicationsSingle-PhaseThree-PhaseBasic measurementsApplication useVR1710 345 43B 1735 1740 430-II 1750 1760Energy studiesMeasure V, I, kW, Cos/DPF, kWhr Get detailed power and energy• • • • • • •Measure MIN/MAX and AVGconsumption profiles duringvaluesenergy audits and pinpointsavings opportunities.• • • • • • •10 day logging • • • • • • •Waste energy monitization•Basic harmonics studyTHD measurement (V & I) Discover the source of distortion • • • • • • • •Harmonics 1 to 25 for V & Iin your installation, so that youcan filter those loads or move• • • • • • • •them to separate circuits.Advanced harmonics studyFull harmonic spectrumIf distorting loads are causing• • • • • • •Power harmonicsproblems in your installation,you need comprehensive datato identify the source and create• • • • •a solution.Basic industrial PQ troubleshootingOscilloscope functionWhen troubleshooting in the• • • • • •Voltage dips and swellsfield, graphical data enablesyou to trace the source of the• • • • • • •problem at hand.Advanced industrial PQ troubleshootingComprehensive loggingcapabilityComplex installations oftenrequire a deeper dive intomeasurement data. Multipleloads may be interactingrandomly to cause a singleproblem.• • • • • •Transient capture • • • • •Flicker• • • • •Fluke 1735 Three-PhasePower LoggerThe Fluke 1735 Three-Phase Power Loggeris the ideal electrician or technician’s toolfor conducting energy studies and basicpower quality logging. Set up the 1735 inseconds, with the included flexible currentprobes and color display. The 1735 logsmost electrical power parameters and harmonicsand captures voltage events.• Ideal for field operation: Compact,rugged instrument; easy to use, quicklyconfirm instrument setup with colordisplay of waveforms and trends• Full system electrical measurementcapability: Three phases and neutralwith included four flexible currentprobes• Prove the benefit of efficiency improvements: Record power andassociated parameters for up to 45 days. Monitor maximum powerdemand over user-defined averaging periods• Check the power quality effects energy saving devices: Measureharmonics and distortion caused by loads and improve reliabilityby capturing voltage dips and swells from load switching• Easy PC connectivity and operation: USB interface for plug andplay operation; download, view graphs and automatically generatereports with included Power Log software• Reliable operation: Two-year warrantyRecommended accessoriesFluke 1735I 1A/10AI 5A/50AMini Current Clamp, PQ4 Mini Current Clamp, PQ4I 20A/200A FS3000A/6000A TF-4Mini Current Clamp, PQ4 36 in, 4 phase Thin FlexOrdering informationIncluded accessoriesFour flexible current probes (15 A/150 A/3000 A), Power Log software,voltage leads and clips, color localization set, PC interface cable,international ac adapter (115 V/230 V, 50 Hz/60 Hz), soft carrying case,users manual and multi-language manual on CD.ModelsFLUKE-1735Three-Phase Power LoggerCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/pqPower Quality Analyzers27

Fluke 430-II Series Three-PhasePower Quality AnalyzersThe new Fluke 434-II, 435-II and 437-II help locate,predict, prevent and troubleshoot power quality problemsin three- and single-phase power distributionsystems. Additionally, the Fluke-patented energy lossalgorithm, Unified Power Measurement, measures,quantifies and monitizes energy losses due to harmonicsand unbalance issues, allowing the user to pinpoint theorigin of energy waste within a system.• Patented energy loss management: Classic activeand reactive power measurements unbalance andharmonic power and energy are quantified to pinpointtrue system energy losses.• Realtime PowerWave data capture: Capture fastrms data, show single cycle rms value to characterizeelectrical system dynamics (generator start-ups, UPSswitching etc.).• Highest safety rating in the industry: CAT IV 600 V/CAT III 1000 V rated for use at the service entrance• Automatic transient mode: Capture 200 kHz waveformdata on all phases simultaneously up to 6 kV• Fully Class-A compliant: Conduct tests according tothe stringent international IEC 61000-4-30 Class-Astandard intervals for 435-II and 437-II• Troubleshoot real-time: Analyze the trends usingthe cursors and zoom tools—even while backgroundrecording continues• Measure all three phases and neutral: Withincluded four iFlex flexible current probes• Monitize energy loss caused by power quality issuesRecommended accessoriesI5sPQ3i430-FLEXI-TF-4pk3 pack of 5 A precision 4 pack of 3000 A thincurrent clamps flexible current probesC435-IIWater-tight hardcase with rollersGPS430GPS timesynchronization moduleEnergy loss calculatorUseful kilowatts (power available) – Effective kWReactive (unusable) power – Reactive kvarKilowatts made unusable by unbalance issues – Unbalance kVAKilowatts made unusable by harmonics – Distortion kVANeutral Current – NeutralTotal cost of wasted kilowatt hoursFeaturesFeatures 434-II 435-II 437-IIMeasures voltage, current, dips, swells, interruptions, harmonics, power, energy loss • • •monitization, frequency, inrush and power inverter efficiencyFlicker — • •Transients — • •Mains signaling — • •Power wave — • •Event waveform capture — • •400 Hz — — •C1740 Soft Case • • —C437-II Hard Case with rollers — — •SD card (Max 32 GB) 8 GB 8 GB 8 GBComingspring 2012Ordering information (basic versions do not include current probes)Included accessoriesFour thin flexible current probes (30-TF), five test leads andclips, battery charger, FlukeView software, optical USB cable,color localization set, soft carrying case, 8 GB SD memory card,users manual on CD.Four thin flexible current probes (i430-TF), five test leads andclips, battery charger, FlukeView software, Power Log software,optical USB cable, color localization set, soft carrying case, 8 GBSD memory card, users manual on CD.Four thin flexible current probes (i430-TF), five test leadsand clips, battery charger, FlukeView software, USB cable,color localization kit, hard carrying case with wheels, 8GB SDmemory card, users manual on CD.ModelsFLUKE-434-IIFLUKE-435-IIFLUKE-437-IIThree-Phase Energy AnalyzerThree-Phase Power Quality andEnergy Analyzer400 Hz Three-Phase Power Qualityand Energy AnalyzerCheck price and availability atwww.fluke.com/wtb28Power Quality AnalyzersFor more information, go to www.fluke.com/pq

Fluke 345 Power Quality Clamp MeterThe ideal meter to troubleshoot modern electrical loadsThe Fluke 345 is more than a power meter. Combining thefunctions of a clamp meter, oscilloscope, data logger and digitalpower meter into one handy device. The Fluke 345 is ideal forworking with variable frequency motor drives, high efficiencylighting and other loads using switching electronics.• AC/DC current: Clamp-on measurement of ac current up to1400 A rms and dc current up to 2000 A without breaking thecircuit• Highest safety rating: CAT IV 600 V power analyzer is ratedfor use at the service entrance• Accurate in noisy environments: Clamp meter performs evenwith distorted waveforms present on electronic loads withlow-pass filter• Data logging: Identify intermittent faults by logging anypower quality parameter for minutes, or over a month,including harmonics• Troubleshoot harmonics: Analyze and log harmonics digitallyor graphically• Inrush current: Capture and analyze nuisance tripping from3 seconds to 300 seconds• View graphs and generate reports: Use power analyzer withincluded Power Log softwareFluke 43B Power Quality AnalyzerThe Fluke 43B Power Quality Analyzer performs themeasurements you need to maintain power systems,troubleshoot power problems, and diagnose equipmentfailures. The 43B has 20 storage locations and can storedata as well as screens.• Basic measurements: Voltage, current and powerharmonics up to 51st, THD• Oscillioscope function: View voltage and currentwaveforms• Transients: Capture up to 40 voltage transients andwaveform events• Detailed event capture: Cursors give time and date ofsags and swells• FlukeView® software: Analysis and reporting, suppliedwith USB connection lead• Warranty: Three-years for analyzer, one-year foraccessoriesRecommended accessoriesFluke 345TP220AC220Industrial Test ProbesAlligator ClipsSee page 59 See page 59TLK291Fused Test Probe SetFlukeVR1710PowerQualityRecorderC550Tool BagSee page 56• Fast and easy recording ofvoltage trends, dropouts andpower quality: Easily pinpointthe root cause of single phasevoltage problems• Extremely easy to use: Plugsdirectly into the mains powersocket and capture data• Quickly see what happenedand when: Min, Max, and AverageRMS values (1/4 cycle) withtime stamp, transient display(>100 μs) with time stamp• Easily identify problems:Power quality or equipmentrelated Flicker recording toEN 61000-4-15, individualharmonic and THD values withtrends• Includes PowerLog software:For quick download, analysisand automatic reporting• Save time: Generate powerquality reports automaticallywith pre-set templatesOrdering informationIncluded accessoriesModelsTest leads, alligator clips, test probes, Power Log software, USB cable, FLUKE-345 Clamp-On Power Meterinternational ac adapter/battery eliminator, soft carrying case, usersmanual, multi-language manual on CD.Voltage and current probes, FlukeView® software, power quality FLUKE-43B Power Quality Analyzerinstructional CD, USB interface cable, line voltage adapter/batterycharger, hard case, users manual.USB cable, Power Log software CD, universal power cord adapters. FLUKE-VR1710 Voltage Quality RecorderCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/pqPower Quality Analyzers29

Fluke Norma 4000 and 5000Precision Power AnalyzersFluke Norma 4000Fluke Norma 4000 and 5000 are idealfor field and laboratory testingFluke Norma Analyzers offer easy and straightforwardoperation with unmatched priceperformance. Features include: 1 to 6 powerphases, 144 mm (5.7 in) color display, harmonicanalysis, scope mode, vector diagram display,recorder function, Fluke NormaView PC softwareand 4 MB RAM data memory.Recommended accessoriesi5sAC Current Clamp32 APlanar Shunt(Norma 4000/5000)Fluke Norma 5000• Choose the right model for your application: A variety of standard configurationsallows users to choose the exact functionality required for their unique application• Electrical measurement integrity and safety: Inputs are galvanically isolated toavoid short circuits in all applications, and simultaneous parallel acquisition of allphases allows for accurate viewing of dynamic events dc to 3 MHz/10 MHz bandwidthfor reliable measurement precision• Voltage, current and power harmonics FFT analysis: To the 40th harmonic, vectordiagram, and Digital Oscilloscope (DSO) mode included in the base unit for completeanalysis capability• Complete electrical and mechanical analysis: PI1 process interface to measuretorque and speed with external sensors, plus four analog outputs for easy use onmotor and drive applications• Data download, analysis and report writing with: Supplied Fluke NormaView PCsoftwareSpecificationsFeatures 1743/1744 1745 1750Measures common power parameters: V, A, W, VA,VAR, PF, energy, flicker, voltage events, and THD• • •Measures voltage and current harmonics to the50 th , unbalance, and mains signaling• • •Transient capture — — •PDA support — — •GPS clock synchronization — — —UPS ride through5 min per interruption,3s>5 hours60 min totalDimensions170 mm x 125 mm x 55 mm 282 mm x 216 mm x 74 mm 215 mm x 310 mm x 35 mm(6.9 in x 5.1 in x 2.2 in) (11.5 in x 8.8 in x 3 in) (8.5 in x 12.2 in x 3.5 in)Weight (approx.) 0.9 kg (2 lb) 1.4 kg (3 lb) 6.3 kg (14 lb)Ordering informationIncluded accessoriesPower supply cable, NormaView PC software, test certificate,calibration values, users manual.Four flexible probes 15/150/1500/3000 A with 2 m cable, PQLog software, RS-232 interface cable and USB adapter, fourdolphin clips, test leads for voltages and power supply, colorlocalization kit, carrying bag, test certificate with measurementvalues, users manual, multi-language manual CD.ModelsNorma 4000Norma 5000FLUKE-1745FLUKE-1744FLUKE-1743High Precision Power AnalyzerHigh Precision Power AnalyzerPower Quality Logger – MemoboxPower Quality Logger – MemoboxPower Quality Logger – MemoboxIn the U.S., these power quality recorders are sold exclusively through power quality representatives. To request ademonstration, or to order, call 1-888-257-9897 or email questions to fpqsupport@fluke.com.150 A 100 AShunt with Cables Shunt with Cables(Norma 4000/5000) (Norma 4000/5000)Fluke 1740SeriesThree-PhasePQ LoggersMemoboxThe Fluke 1740 Series Three-Phase PowerQuality Loggers are instruments for technicianswho troubleshoot and analyzepower distribution systems. The includedPQ Log software quickly assesses thequality of power at the service entrance,substation, or at the load, according to thelatest EN50160 standard.• Plug and play: Setup in minutes withautomatic current probe detection andpowering• Installs inside the cabinet: Compact,fully-insulated housing and accessoriesfit easily in tight spaces, next tolive power• Determines the root cause: IncludedPQ Log software quickly analyzestrends, creates statistical summaries,and generates detailed graphs andtables• Measure voltage with premiumaccuracy: IEC61000-4-30 Class-Acompliant voltage accuracy (0.1 %)Fluke1744/1743Fluke 1745Check price and availability atwww.fluke.com/wtb30Power Quality AnalyzersFor more information, go to www.fluke.com/pq

Fluke 1750 Three-Phase Power RecorderNever miss capturing a disturbance• Power quality that meets the standard: All measurementscomply with IEC61000-4-30 standards for correctevaluation of all measured values including voltage, current,power, harmonics, flicker etc.• Quick and reliable configuration: PDA wireless “frontpanel interface” provides a window into what theinstrument is recording, enabling quick and reliableconfiguration even in awkward test locations• Threshold-free set up: Apply thresholds after data iscollected with Fluke Power Analyze Software—no needto worry about missed information due to incorrectsetups• Captures everything: Cross-channel and current triggeringcapture every measurement, on every channel,every time• Intuitive PC software: Easily analyze data and generatereports with automated EN50160 reporting andcompliance• Measure every parameter: Voltage and current on threephases, neutral and groundRecommended accessories3210-PR-TF3310-PR-TF1000 A Thin Flexi Clamp 5000 A Thin Flexi ClampTPS FLex 24-TFTPS Clamp 10 A/1 AFluke 1760 Three-Phase PowerQuality Recorder• Fully Class-A compliant: Conduct testsaccording to the stringent international IEC61000-4-30 Class-A standard• GPS time synchronization: Correlate data withevents or datasets from other instrumentswith precision• Flexible and fully configurable thresholdsand scale factors: Allows user to pinpointspecific issues by defining the detailed criteriafor detection and recording of disturbances.• 10 MHz, 6000 Vpk waveform capture: Get adetailed picture of even the shortest event• 2 GB data memory: Enables detailed, simultaneousrecording of numerous power parametersfor long periods of time• Comprehensive software included: Provides trend diagrams for root cause analysis,statistical summaries, report writing and real-time data monitoring in the onlinemode• Plug and play: Allows quick setup with automatic sensor detection; sensors areinstrument powered, eliminating the need for batteriesTPS VoltProbe 600 V1750/CaseSoft Carry BagSpecificationsFeatures 1760TR 1760 1760TR BASIC 1760 BASICOnline mode (oscilloscope, transients andevents)• • • •Fast transient analysis up to 10 MHz • — • —Four 600 V voltage probes • • — —Four dual-range flexible current probes(1000 A/200 A ac)• • — —GPS time sync receiver • • — —Ordering informationIncluded accessoriesModelsAcquisition unit, PDA and charger, power plug adapters, four FLUKE-1750Three-Phase Power Recorder400 A current probes, five test leads and clips, SD memory card,Fluke Power View and Fluke Power Analyze software, powercord with international plug set, ethernet cable, color localizationset, users manual and CD.Acquisition unit, voltage and current probes (depending on FLUKE-1760Three-Phase Power Recordermodel orders) Fluke PQ Analyze software, power cord withinternational plug set, ethernet cable, color localization set,FLUKE-1760TRThree-Phase Power Recorderusers manual and CD.FLUKE-1760 BASIC Three-Phase Power RecorderFLUKE-1760TR BASIC Three-Phase Power RecorderIn the U.S., these power quality recorders are sold exclusively through power quality representatives. To request ademonstration, or to order, call 1-888-257-9897 or email questions to fpqsupport@fluke.com.Check price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/pqPower Quality Analyzers31

Pick the right process tool for youProcess Tools Selection GuidePrecisionMultifunctionProcessCalibratorIntrinsicallySafeCalibratorDocumentingProcessCalibratorProcess mA ProcessMeter®Pressure TemperatureClamp Meter Test Tool Loop Calibrator Calibrator CalibratorModels 773 789 715 719 724 726 725Ex 754MeasureV dc 30 V 1000 V 25 V — 30 V 30 V 30 V 300 VV ac (true-rms) — 1000 V — — — — — 300 VResistance — 40 MW — — 3200 W 4000 W 3200 W 11 kWA dc 20.99, 99.9 mA 30 mA, 1 A 24 mA 24 mA 24 mA 24 mA 24 mA 110 mAA ac — • — — — — — —Frequency — 20 kHz — — — 15 kHz 10 kHz 50 kHzPressure — — — 30 psi, 100 psi • 1 • 5 • 1Temperature: RTDs — — — — 7 types 8 types 7 types 8 typesTemperature: TCs — — — — 12 types 13 types 12 types 13 typesSource/SimulateV dc 10 V — 20 V — 10 V 20 V 10 V 15 VResistance — — — — 3200 W 4000 W 3200 W 11 kWmA dc 24 mA 24 mA 24 mA 24 mA — 24 mA 24 mA 22 mAmA source; auto step,auto ramp• • • • — • • •Frequency — — — — 15 kHz 10 kHz 50 kHzTemperature: RTDs — — — — 7 types 8 types 7 types 8 typesTemperature: TCs — — — — 12 types 13 types 12 types 13 typesRecordMin/Max — • — • — — — •Hold • • — • — — — •As found/As left results — — — — — — — •Log data — — — — — — — •Upload data to PC — — — — — — — •Remote operation — • — — — • — —Features24 V loop supply • • • • • • 12 V •Non-contact mAmeasurement• — — — — — — —HART communication — — — — — — — •Integrated hand pressurepump— — — Electric — — — —Intrinsically safe (ATEX) — — — — — — • —Warranty Three-year Three-year Three-year One-year Three-year Three-year Three-year Three-yearNIST traceablecertification— — • • • • • •Accessories 3 — A/B A/B C A/B A/B — —Pressure enabled 4 • • • •See page 33 34 35 39 38 37 40 361 Fluke 700 Pressure Modules required.2 Either the internal sensor or a Fluke 700 Pressure Module may be used.3 Accessories: A. Compatible with LockPak B. Compatible with TPAK C. Accepts hanging straps from TPAK D. Optional accessories.4 Fluke Process Calibrators in this guide displaying the Pressure Enabled symbol display readings from the 700 Series Pressure Modules.5 Fluke 700PEx Pressure Module required.Check price and availability atwww.fluke.com/wtb32Process Calibration ToolsFor more information, go to www.fluke.com/processtools

Fluke 771, 772 and 773mA Process Clamp MetersFluke 771 Fluke 772 Fluke 773N10140Use the Fluke 771, 772and 773 to:• Measure 4-20 mA signalswithout ”breaking the loop,”save time and money troubleshooting4-20 mA signalsUse the Fluke 772 and773 to:• Source 4-20 mA signals fortesting control system I/O orI/Ps• Simulate 4-20 mA signals fortesting control system I/O• Measure 4-20 mA signals within-circuit measurement• Power a transmitter with the24 V loop power supply• Automatically ramp and stepchange the 4-20 mA output forremote testingUse the Fluke 773 to:• Measure dc voltage to verify 24 V power supplies orvoltage I/O signals• Source dc voltage to test voltage input devices• Scaled mA output signal enables a logging DMM (289) torecord 4-20 mA signal without breaking the loop• mA in/out: simultaneously source a mA signal whilemeasuring a mA signal with the clampFluke 771, 772 and 773 mAProcess Clamp Meters payfor themselves.• The more you use them the moremoney you save• Measuring 4 to 20 mA signals(five) times without operatorintervention can pay for the 771• Saving a trip back to shop to geta loop calibrator can pay for theprice difference of the 772• Saving a trip back to the shop fora voltage test source can pay forthe price difference of the 773Recommended accessoriesTL220C550SureGrip IndustrialTool BagTest Lead Set See page 56See page 57FeaturesmAmeasurew/jawmAmeasureIn circuit mA source mA simLooppower24 VDCVsource0-10 VDCVmeasure0-30 VScaled mAoutput tomA inputmA in/out771 • — — — — — — — —772 • • • • • — — — —773 • • • • • • • • •SpecificationsFunction Resolution and range Accuracy Notes771, 772, 773 mA measurement0 mA to 20.99 mA 0.2 % + 5 counts Measured by clamp21.0 mA to 100.0 mA 1 % + 5 counts —772 and 773 mA measurement 0 mA to 24.00 mA 0.2 % + 2 counts Measured in series with test jacks772 and 773 mA source 0 mA to 24.00 mA 0.2 % + 2 countsMaximum mA drive: 24 mA into1,000 ohms772 and 773 mA simulate 0 mA to 24.00 mA 0.2 % + 2 counts Maximum voltage 50 V dc773 Voltage source 0 V dc to 10.00 V dc 0.2 % + 2 counts 2 mA maximum drive current773 Voltage measure 0 V dc to 30.00 V dc 0.2 % + 2 counts —General specifications 771 772 773Battery Two 1.5 V, Alkaline, IEC LR6 Four 1.5 V, Alkaline, IEC LR6Working hours 20 hours typical 12 hours @ 12 mA source into 500 ohmsSize (HxWxL)59 mm x 38 mm x 212 mm(2.32 in x 1.5 in x 8.35 in)41.3 mm x 76 mm x 248 mm(1.625 in x 3 in x 9.75 in)Weight 260 g (9.1 oz) 415 g (14 oz)Operating temperature -10 °C to 50 ºCIP rating IP 40WarrantyThree-year, one-year on mA clamp assembly and cableOrdering informationIncluded accessoriesModelsSoft carrying case, users manual. FLUKE-771 Milliamp Process Clamp MeterTest leads, alligator clips and hanging FLUKE-772Milliamp Process Clamp Meterstrap, soft carrying case, users manual.FLUKE-773Milliamp Process Clamp MeterCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/771Process Calibration Tools33

Fluke 789 and 787ProcessMeter Test ToolsFluke 789 ProcessMeterWith the Fluke 789 ProcessMeter, process technicianscan do a lot more while carrying a lot less.• 24 V loop power supply• CAT IV 600V rating• HART mode setting with loop power(adds 250 ohm resistor)• Double-sized, dual display• 20 mA drive into 1200 ohms• Backlight with two brightness settings• 0 % to 100 % mA Span Check buttons to togglebetween 4-20 mA• Infrared I/O serial port compatible withFlukeView® Forms Software• Improved battery power with four AA batteries• Plus all the proven 787featuresRecommended accessoriesTPAKTL220MagneticSureGrip IndustrialMeter HangerTest Lead SetSee page 64 See page 57Fluke 789Fluke 787 ProcessMeter• Simultaneous mA and % ofscale readout on mA output• 25 % Manual Step plus AutoStep and Auto Ramp on mAoutput• Min/Max/Avg/Hold/Relativemodes• Externally accessible batteryfor easy changes80T-150UATL175UniversalTwistGuardTemperature ProbeTest LeadsSee page 61 See page 59TrueRMSC115Soft Carrying CaseSee page 5680PK-8Pipe ClampTemperature ProbeSee page 61(Fluke 789 only)Fluke 787SpecificationsMeasurement function Best accuracy range and resolution (% of reading + LSD)V dc 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V 0.1 % + 1V dc (true-rms) 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V 0.7 % + 2mA dc 30.000 mA .05 % + 2A dc 1.000 A (0.440 A continuous) 0.2 % + 2A ac 1.000 A (0.440 A continuous) 1 % + 2Resistance 400.0 W, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M 0.2 % + 1Frequency (0.5 Hz to 20 kHz) 199.99 Hz, 1999.9 Hz, 19.999 kHz .005 % + 1Diode test789: 2.000 V (shows diode voltage drop) 787: 2.400 V(shows diode voltage drop)2 % + 1 2 % + 1ContinuityBeeps for resistance < approx. 100 ohmsOutput function Range and resolution Drive capabilityAccuracy(% of span)DC current output (internalbattery operation)DC current simulate (external24 V loop supply, up to 48 V on789 only)0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA(selectable at power-up) Over-range to 24.000 mA0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA,(selectable at power-up) Over-range to 24.000 mA789: 24 V complianceor, 1,200 ohms,@ 20 mA 787: 12 Vcompliance or,500 ohms, @ 20 mA.05 %1000 ohms, @ 20 mA .05 %24 V loop supply 789: Minimum 24 V 787: Not available 250 ohms @ 20 mA > 24 VManual: coarse, fine, 25 % and 100 % step (100 % step 789 only)Current adjustment modesAutomatic: slow ramp, fast ramp, 25 % stepTemperature range of 18 °C to 28 °C, for one year after calibration.Maximum voltage applied between any jack and earth ground:1000 V rms. Storage temperature: -40 °C to 60 °C.Operating temperature: -20 °C to 55 °C. Relative humidity: 95 % up to 30 °C; 75 % up to 40 °C; 45 % up to 50 °C; 35 % up to 55 °C.Safety: Designed in accordance with EN61010, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 61010.1-92 Over-voltage CAT III.Size (HxWxL)/weight (787 with holster): 52 mm x 98 mm x 201 mm (2.06 in x 3.86 in x 7.93 in)/638 g (1.4 lb).Size (HxWxL)/weight (789): 50 mm x 100 mm x 203 mm (1.97 in x 3.94 in x 8.00 in)/600 g (1.3 lb).Warranty: Three-year.Ordering informationIncluded accessoriesTest leads, alligator clips, 4 AA alkaline batteries (installed), quick reference guide, usersmanual, multi-language manual CD.Test leads, alligator clips, holster with test lead storage, one 9 V alkaline battery (installed),quick reference guide, users manual, multi-language manual CD.ModelsFLUKE-789FLUKE-787ProcessMeterProcessMeterCheck price and availability atwww.fluke.com/wtb34Process Calibration ToolsFor more information, go to www.fluke.com/processmeters

Fluke 715, 707 and 705 Loop CalibratorsComplete family of volt/mA calibratorsFluke 715 Volt/mA Calibrator• Source voltage to 200 mV or 20 V• Measure loop current (0-20 mA, 4-20 mA) signalswith 0.01 % accuracy and 1 µA resolution• Measure voltage output process signals from PLCs,transmitters• Source or simulate 4-20 mA loop current• 24 V loop supply with simultaneous currentmeasurement• Ramp and Step Ramp output functionsFluke 707 and 705• Innovative output adjustment dial on 707 provides1 µA and 100 µA resolution and one-hand operation• Large display and simple interface for ease of use• Simultaneous mA and % readout for quick, easyinterpretation of readings• mA accuracy of 0.015 % on the Fluke707 and 0.02 % on the 705• HART mode on 707 connects 250ohm resistor in series with 24 Vloop for compatibility with HARTcommunicators• Push button 25 % steps for fast, easylinearity checks• “Span Check” for fast confirmation ofzero and span• Selectable slow and fast linear step ramp provideramping outputs for valve slewing, remote testing andloop functional testsFluke 707• 24 V internal loop supply, so you can power and read atransmitter at the same time without carrying a DMM• 0-20 mA or 4-20 mA default start up modesFluke 715Specialty modelsFluke 707 ExIntrinsically SafeLoop CalibratorSee page 40 for moreinformation.Recommended accessoriesTL28AHeavy DutyTest Lead SetTL220SureGrip IndustrialTest Lead SetSee page 57SpecificationsFunctions Fluke 705 and 707 Fluke 715Voltage measurementRange 0 V to 28 V 0 mV to 200 mV 0 V to 25 VResolution 1 mV 10 µV 1 mVAccuracy 705: 0.025 % Rdg + 1 LSD 707,707Ex: 0.015 % Rdg + 2 LSD0.01 % Rdg + 2 LSDCurrent measurementRange 0 mA to 24 mA 0 mA to 24 mAResolution 0.001 mA 0.001 mAAccuracy 705: 0.02 % Rdg + 2 LSD 707,707Ex: 0.015 % Rdg + 2 LSD0.01 % + 2 LSDCurrent sourcingRange 0 mA to 20 mA or 4 mA to 20 mA 0 mA to 20 mA or 4 mA to 20 mAAccuracy 705: 0.025 % Rdg + 2 LSD 707,707Ex: 0.015 % Rdg + 2 LSD0.01 % Rdg + 2 LSDDrive capability705: 1000 W @ 24 mA 707: 1200 W @24 mA 707Ex: 700 W @ 20 mA1000 W @ 24 mALoop power while measuring mA 24 V 24 VVoltage sourcing0 mV to 200 mV or 0 V to 20 VDisplay current and % of span Yes mA or %Auto step, auto ramp Yes YesSpan Check Yes YesBattery life 18 hours typical, at 12 mA 18 hours typical, at 12 mAWarrantyThree-yearC550Tool BagSee page 56PV350Pressure VacuumModuleSee page 65Ordering informationIncluded accessoriesTest leads, alligator clips, holster with test lead storage, NIST-traceablecalibration report and data, single 9 V alkaline battery, instruction sheet(14 languages).ModelsFLUKE-715FLUKE-707FLUKE-707 ExFLUKE-705Volt/mA CalibratorLoop CalibratorIntrinsically Safe Loop CalibratorLoop CalibratorCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/loopProcess Calibration Tools35

Fluke 753 and 754 CalibratorsCalibrate/troubleshoot process control instrumentationFluke 754PressureEnabled• Calibrate temperature, pressure, voltage, current,resistance and frequency instruments• Built-in procedures for transmitters, square roottransmitters, pressure and temperature switches• Simultaneously measure and source• Automatically capture calibration results• Document procedures and results to meet ISO9000, EPA, FDA, OSHA and other requirements• Measure/simulate 13 types of thermocouples andeight RTDs• Store up to 8,000 readings in data logging mode• Protected against dirt, dust and moisture;unaffected by vibration• Includes a USB interface• Operate in English, French, German, Italian andSpanish• One- and two-year calibration cycles and athree-year warranty (one-year for pressuremodules)754: Get HART-abilityThe Fluke 754 offers all of the capabilities of the753, plus the ability to calibrate, maintain andtroubleshoot HART instrumentation. IntegratedHART communication functions permit you to monitor,control and calibrate HART instrumentation. Ithandles fast pulsed instruments such as RTD transmittersand PLCs responding to pulses within 1 ms.Recommended softwareInstrumentationmanagement softwareThe Fluke 753 and 754 are compatiblewith Fluke 750SW DPC/TRACK2software and with software fromCornerstone, Emerson, Honeywell,On Time Support, Prime Technologies,Yokogowa, Intools, Meridiumand Beamex.For more information, visitwww.fluke.com/softwareRecommended accessories700PxxPressure ModulesSee page 39750SWDPC/TRACK2 Software753: A complete documenting calibratorThe 753 is a complete multifunction documentingcalibrator and includes a PC interface that lets you loadprocedures, lists and instructions created with software—or unload data for printing, archiving, and analysis. The753 can hold a full week of calibrations and procedures.700PTP-1C799PneumaticField Soft CaseTest Pump See page 56See page 61Fluke 753SpecificationsFunctions Measure SourcingDC voltage 0.020 % reading +0.005 % full scaleDC current 0.01 % reading +5 µA0.01 % output +0.005 % full scale0.01 % output +0.003 mAResistance 0.05 % reading + 50 mΩ 0.01 % output + 240 mΩFrequency 0 to 50 KHz, ± 0.5 Hz to1100 Hz0 to 50 KHz, ± 0.1 Hz to1099.9 HzThermocouples 0.3 °C 0.2 °CRTDs 0.3 °C 0.1 °CPressureTo 0.025 % of full scale, per pressuremodule specificationsSummary specifications: best case, mid-range,one year.Battery life: Typically over eight hoursInternal battery pack: Li ion 4400 mAhBattery replacement: Via twist lock fastenerwithout opening calibrator; no tools requiredWeight: 1.2 kg (2.7 lb)Size (HxWxD): 245 mm x 136 mm x 63 mm(9.6 in x 5.4 in x 2.5 in)Ordering informationIncluded accessoriesModelsThree sets of stackable test leads, three sets of test probes with FLUKE-754 Documenting Process Calibrator-HARTthree sets of “extended tooth” alligator clips, two sets of hookclips, Li-ion battery pack, battery charger, field soft case, USBFLUKE-753 Documenting Process Calibratorcommunication cable, getting started guide, instruction manualon CD, NIST traceable certificate of calibration, DPC/TRACK2sample software that enables upload and printing of calibrationrecords. Model Fluke-754 includes HART communication cable.Software media, instruction manual, USB cable. FLUKE-750SW DPC/TRACK2 SoftwareCheck price and availability atwww.fluke.com/wtb36Process Calibration ToolsFor more information, go to www.fluke.com/754

Fluke 726 and 725 MultifunctionProcess CalibratorsFluke 726 Precision MultifunctionProcess CalibratorThe Fluke 726 measures and sources nearly all processparameters and can calibrate almost anything. Interpretresults without the help of a calculator and storemeasurement data for later analysis.• Precise measurement and calibration source performance,accuracies of 0.01 %• Transmitter error % calculation, interpret calibrationresults without a calculator• Memory storage for up to eight calibration results,return stored calibration data from the field for lateranalysis• Frequency totalizer and frequency pulse train sourcemode for enhanced flowmeter testing• HART mode inserts 250 ohm resistor in mAmeasure and source for compatibility with HARTinstrumentation• Integrated pressure switch test allows you to capturethe set, reset and deadband of a switch• Custom RTD curves, add calibration constants forcertified RTD probes for temperature measurement• Voltage input protection design for improvedreliabilityFluke 725 MultifunctionProcess Calibrator• Measure volts, mA,RTDs, thermocouples,frequencyand ohms totest sensors andtransmitters• Source/simulatevolts, mA, thermocouples,RTDs,frequency, ohmsand pressure to calibratetransmitters• Measure/sourcepressure using anyof 29 Fluke 700PxxPressure Modules• Source mA with simultaneousPressureEnabledpressure measurement to conductvalve and I/P tests• Support flow meter testing withfrequency and counts per minute(CPM) functions• Perform fast linearity tests withauto step and auto ramp featuresSpecificationsMeasure and sourceFunctions Range or type Resolution Accuracy NotesVoltage 0 to 100 mV 0.01 mV 0.01 %, Max load, 1 mA0 to 10 V (source)0 to 20 V (source)0 to 30 V (measure)0.01 V0.01 V0.01 V0.02 %Rdg + 2 LSDmA 0 to 24 0.001 mA 0.01 %,0.02 %Rdg + 2 LSDMax load, 1000 WmV (TCterminals)OhmsHz - CPM-10.00 mV to+75.00 mV15 W to 3,200 W5 W to 4,000 W2.0 to 1,000 CPM1 to 1000 Hz1.0 to 10.0 kHz10.0 to 15.0 kHz.01 mV 0.01 %, 0.02 %of range + 1 LSD0.01 Wto 0.1 W0.1 CPM1 Hz0.1 kHz0.1 kHz0.10 W to 1.0 W0.015 %± 0.05 %± 0.05 %± 0.25 %± 0.05 %——Source;5 V p-p1 V to 20 V p-psquarewave,-0.1 V offsetLoop supply 24 V dc N/A 10 % —T/C J, K, T, E, L, N, U, XK 0.1 °C, 0.1 °F to 0.7 °C—to 0.2 °CT/C B, R, S, BP 1 °C, 1 °F to 1.7 °C—to 1.2 °CRTDs Cu (10), Ni120 (672) 0.01 °C, to 0.15 °C—Pt 100, 200, 500,1000 (385)Pt 100 (3916),Pt 100 (3926)0.01 °F0.1 °C, 0.1 °F to 0.2 °CUnique 726 specifications are bolded.General specificationsStorage temperature:-20 °C to 71 °COperating temperature:-10 °C to 55 °CRelative humidity:90 % (10 °C to 30 °C);75 % (30 °C to 40 °C);45 % (40 °C to 50 °C);35 % (50 °C to 55 °C)Shock: 1 meter drop testSafety: CSA C22.2No. 1010.1:1992EMC: EN50082-1:1992 andEN55022:1994 Class BSize (HxWxD): 200 mm x96 mm x 47 mm (7.9 in x3.8 in x 1.9 in)Weight: 650 g (23 oz)Battery: Four AA alkalinebatteriesBattery life: 25 hours typicalWarranty: Three-yearsIntrinsically safe version available(see page 40)Recommended accessoriesTPAK80PK-27MagneticIndustrial SurfaceMeter HangerTemperature ProbeSee page 64 See page 60700PxxC125Pressure ModulesSoft Carrying CaseSee page 39 See page 56Simultaneous function capability Channel A Channel B24.000 mA dc M M or S24.000 mA dc with 24 V loop supply M —100.00 mV dc — M or S30.000 V dc measure M —20.000 V dc measure; 10.000 V dc source; 20.000 V dc source — M or S15 Ohms to 3200 Ohms (725); 5 Ohms to 4000 Ohms (726) — M or SThermocouple J, K, T, E, R, S, B, M, L, U, N, XK, BP — M or SRTD Cu 10, Ni120; Pt100 (392); Pt100 (JIS); Pt100, 200, 500, 1000 (385), XK and BP — M or SPressure (requires Fluke 700PXX Modules) M M used as SFrequency; 10 kHz; (15 KHz 726) — M or SM = Measure, S = Source/SimulateOrdering informationIncluded accessoriesTest leads, test clips, one pair of stackable testleads, product overview manual, users manual in14 languages on CD.ModelsFLUKE-726FLUKE-726 ExFLUKE-725Precision Multifunction Process CalibratorIntrinsically Safe Precision Multifunction Process CalibratorMultifunction Process CalibratorCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/726Process Calibration Tools37

Fluke 712, 714 and 724Temperature CalibratorsThe Fluke 710 Series temperature calibrators deliveroutstanding performance, durability and reliability.And with a push-button interface, similar to themultifunction Fluke 750 Series Documenting ProcessCalibrators, the 710 Series are easy to use. Eachcalibrator is EMI tolerant, dust- and splash-resistant,and features a removable battery door for quick batterychanges.Fluke 714 Thermocouple Calibrator• Measure temperature from TC probes• Simulate TC output• Operable with nine types of thermocouples• Calibrate linear TC transmitter with mV sourcefunction• Selectable °F or °C• 25 % stepping, auto-step and auto-ramp• Available as accessories: Fluke 700TC1 and TC2Thermocouple Mini-plug Kits• Ramp and Step Ramp output functionsFluke 712 RTD Calibrator• Compatible with pulsed currenttransmitters• Measure temperature from anRTD probe• Simulate RTD output• Operates with seven types of RTD• Measure additional RTDs usingohms measurement function• Simulate additional RTDs usingohms source function• °F or °C selectable• 25 % stepping, auto-step andauto-ramp• Ramp and Step Ramp outputfunctionsSpecialty modelFluke 724 TemperatureCalibrator• Source/measureTCs, RTDs, voltsand ohms• Measure mAwhile supplyingloop power• 25 % and 100 %stepping, autostepand autorampRecommended accessoriesTL175 (712/724) TL220 (712/724)TwistGuardSureGrip IndustrialTest LeadsTest Lead SetSee page 59 See page 5780PK-24 (714/724) 80PK-3A (712/724)SureGrip AirSurface ProbeTemperature Probe See page 60See page 60SpecificationsModels Functions Range Resolution Accuracy NotesFluke 712Fluke 714Measure/simulate RTDMeasure/simulateresistanceMeasure/simulatethermocouple-200 °C to 800 °C(Pt 100-385)0.1 °C, 0.1 °F0.2 °C, 0.4 °F(Pt 100-385)5 W to 4000 W 0.1 W 0.025 % —-200 °C to 1800 °C,depending on type(K, -200 °C to1370 °C)0.1 °C or °F(1 °C or °F; BRS)0.5 °C, 0.8 °F(Type K)Measure/simulate mV -10 mV to 75 mV 0.01 mV 0.015 % +10 µV —General specifications for all Fluke 712 through 718 calibrators.Maximum voltage: 30 V. Non-operating temperature: -40 °C to 60 °C. Operating temperature: -10 °C to 55 °C.Relative humidity: 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C).Operating altitude: 3,000 m max. Shock: 1 m drop test. Vibration: Random, 2 g, 5-500 Hz.Safety: CSA C22.2 No. 1010.1:1992. EMC: EN50082-1:1992 and EN55022:1994 Class B.Size/weight (HxWxD) (712-717): 187 mm x 87 mm x 32 mm (7.35 in x 3.41 in x 1.25 in) 330 g (12 oz).Size/weight (HxWxD) (712-717 with holster): 201 mm x 98 mm x 52 mm (7.93 in x 3.86 in x 2.06 in) 600 g (21 oz).Size/weight (HxWxD) (718): 210 mm x 83 mm x 62 mm (8.25 in x 3.27 in x 2.44 in) 737 g (26 oz).Size/weight (HxWxD) (718 with holster): 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in) 992 g (35 oz).Power: 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 .Battery life: 4 to 20 hours, typical, depending on functions used.Warranty: Three-year (one-year on pressure pump in Fluke 718).Pt; 100 200 5001000 (385); Pt 100(392); Pt 100 (392) JIS;Ni 120 (672)9 TC types; J K T E RS B per NIST 175 andITS-90 L U per DIN43710 and PTS-68TPAKAC220Magnetic Meter Hanger SureGrip Alligator ClipsSee page 64 See page 59C101 (724) C25 (712/714)Meter Hard CaseLarge Soft CaseSee page 56 See page 56Ordering informationIncluded accessoriesTest leads, test clips, one pair of stackable test leads, product overviewmanual, users manual in 14 languages on CD.Test leads, alligator clips (excluding model 714), holster with test leadstorage, single 9 V alkaline battery and instruction sheet (14 languages).ModelsFLUKE-724FLUKE-714FLUKE-712Temperature CalibratorThemocouple CalibratorRTD CalibratorCheck price and availability atwww.fluke.com/wtb38Process Calibration ToolsFor more information, go to www.fluke.com/tempcal

Fluke 717, 718 and 719 Pressure CalibratorsAccurate and rugged, temperature calibration toolsPressureEnabledFluke 719SpecificationsOrdering informationFluke 719 Electric Pressure Calibrators• Electric pump enables one-handed pressure pumping andmakes pressure calibration quicker and easier• Best in class 0.025 % pressure measurement accuracy• Programmable pump limit settings can eliminate overpressurization—set‘pump to’ pressure values• Two ranges, 30 psi and 100 psiFluke 718 Pressure Calibrators• 1, 30, 100 and 300 psi ranges available• Pump to 300 psi, 20 bar with internalpump (718-300G)• 718-1G includes special low volume pumpand high measurement resolution for lowpressure calibrationFluke 717 Pressure Calibrators• Measure up to 10,000 psi/690 bar sensor(10000G model)• Compatible with non-corrosive gasesand liquids718 and 719• Precision vernier for fine pressureadjustment• Variable release rate bleed valve for controlledpressure release717, 718 and 719 common features• Pressure switch test makes a difficult task easy, captures set, resetand deadband values of a pressure switch• 717 and 718, measure pressure to 0.025 % of full scale with internalsensor• Measure mA with 0.015 % accuracy and 0.001 mA resolution, whilesourcing 24 V loop powerModels Range Resolution Comment717-1 +/- 1 psi, 27.5 in H 2 0, +0.0001 psi, 0.0001 kPa, Fluke 718 dry air only and includes on board718-1G(-7 - +7 kPa)0.0001 in H 2 0pump717-15G -12 to 15 psi, -83 to 0.001 ps1, 0.01 kPa, 0.01103 kPain H 2 0—717-30G-12 to + 30 psi,0.001 psi, 0.001 kPa, 0.001 Fluke 718 and Fluke 719 dry air only and718-30G* and (-83 to 207 kPa)in H 2 0includes on board pump719-30G717-100G -12 to + 100 psi,Fluke 718 and Fluke 719 dry air only and0.01 psi, 0.01 kPa, 0.01 in H(-83 to 690 kPa)2 0718-100G*includes on board pump717-300G-12 to +300 psi,Fluke 718 dry air only and includes on board718-300G* and0.01 psi, 0.01 kPa, 0.01 in H(-83 to +2070 kPa)2 0pump719-100G717-500G 0-500 psi, 0-3450 kPa 0.01 psi, 0.1 kPa Compatible with non-corrosive gases and fluids717-1000G 0-1000 psi, 0-6900 kPa 0.01 psi, 0.1 kPa Compatible with non-corrosive gases and fluids717-1500G 0-1500 psi, 0-10342 kPa 0.1 psi, 1 kPa Compatible with non-corrosive gases and fluids717-3000G 0-3000 psi, 0-20700 kPa 0.1 psi, 1 kPa Compatible with non-corrosive gases and fluids717-5000G 0-5000 psi, 0-34500 kPa 0.1 psi, 1 kPa Compatible with non-corrosive gases and fluids717-10000G 0-10000 psi, 0-69000 kPa 1 psi, 1 kPa Compatible with non-corrosive gases and fluidsPressure accuracy 0.035 % of range, 1 year. 0.025 % for 6 months, 717 and 718-1G: 0.05 % 6 months, 1 year, 718 and717-300G 0.035 % 6 months, 0.05 % 1 yearmA measurement 0-24 mA range 0.001 mA resolution Accuracy: ± 0.015 % + 1 countLoop power 24 V dc Accuracy: ± 10 %*Intrinsically safe models available, see page 39.Warranty: Three-year on calibrator, one-year on pump.Included accessories ModelsTest leads, alligator FLUKE-719 30G Electric Pressure Calibrator FLUKE-719-100G Electric Pressure Calibratorclips, holster, test hose(719), one 9 V alkalineFLUKE-718 1G Pressure Calibrator FLUKE-718 30US Pressure Calibratorbattery (two 9 V batteriesFLUKE-718 100US Pressure Calibrator FLUKE-718 300G Pressure Calibratorin 718 and 719), FLUKE-717 1G Pressure Calibratorsafety sheet.FLUKE-717 15G Pressure Calibrator FLUKE-717 30G Pressure CalibratorFLUKE-717 100G Pressure Calibrator FLUKE-717 300G Pressure CalibratorFLUKE-717 500G Pressure Calibrator FLUKE-717 1000G Pressure CalibratorFLUKE-717 1500G Pressure Calibrator FLUKE-717 3000G Pressure CalibratorFLUKE-717 5000G Pressure Calibrator FLUKE-717 10000G Pressure CalibratorFor a full list of Fluke 700 Pressure Modules, visit www.fluke.com/pressure.For more information, go to www.fluke.com/pressureFluke 718Fluke 717Pressure modulesFluke 700 Series Pressure Modules• 29 pressure modules• 8 intrinsically safepressure modules*• Ranges from1.000 in H 2 0(0.2491 kPa)to 10,000 psi(68.948 MPa)• Gage, differential,dual (compound),absolute andvacuum modules• Rugged cases protect the modulesfrom harsh environments• Full-accuracy performance from0 °C to 50 °C*For use with 718Ex and 725Ex onlyPressureEnabledFluke Process Calibrators in this catalogdisplaying the Pressure Enabledsymbol display readings from the700 Series Pressure Modules.Recommended accessories700ILFIn-Line FilterSee page 61700LTP-1Low PressureTest PumpSee page 61700HTP-2C116Hydraulic Test PumpLarge Soft CaseSee page 61 See page 56Check price and availability atwww.fluke.com/wtbProcess Calibration Tools39

Intrinsically Safe ProductsCalibrators, thermometers and multimetersdesigned to intrinsic safety standardsWhat is “Intrinsically Safe”?Intrinsic safety is a protection method employed in potentially explosive atmospheres.Devices that are certified as “intrinsically safe” are designed to be unable to releasesufficient energy, by either thermal or electrical means, to cause ignition of flammablematerial (gas or dust/particulates).There are no global intrinsically safe standards or certifications, but there are organizationsthat influence directives in certain world geographies.Fluke products28 II Ex: IntrinsicallySafe True-rms MultimeterFactory Mutual – In the United States, Factory Mutual Research,managed by Factory Mutual (FM) Global, is a non-profit scientific andtesting organization that has tested and certified over 40,000 productsin the last 165 years. FM Research has set certification guidelines forequipment used in potentially explosive atmospheres.Canadian Standards Association (CSA) – Accreditation body forNorth American regulations, based in Toronto, Canada.ATEX – The primary intrinsically safe standard, which has been setin the European Union with the Directive 94/9/EC, commonly calledATEX (Atmosphères Explosibles), French for explosive atmospheres.707Ex: IntrinsicallySafe mA Calibrator718Ex: IntrinsicallySafe Pressure CalibratorATEX certifiedNorth AmericanCertificationFor additionalproduct detailII 2 G Ex ia IIC T4 FM Approval Pending See page 11II 2 G Ex ia IIC T4II 1 G Ex ia IIC T4N.I. Class I, Div 2,Groups A-D T4I.S. Class I, Div 1,Groups A-D T4See page 35See page 39Pressure gaugesFluke-700G SeriesPressure Gauges• Rugged robustdesign• Nine pressureranges from0-15 psi up to10,000 psi• CSA Class I,Div. 2 GroupsA-D rating• ii 3 G Ex nA IIB T6 ATEXcertification• 0.05 % of full scale accuracy• Measurement logging to internalmemory for upload (requires optional700G/Track Software)• Backlit displayFluke 574-NINonincendiveThermometerFor data loadingand extra safetythe Fluke 574Nonincendive (NI)Thermometer hasthe same great features as the 574model thermometer with the extra confidenceof a Factory Mutual approvalfor use in hazardous environments.Class I, Division 2, Groups A, B, C, D: Class I, Zone 2 IIC;T4 Ta=50 °C when used with 1.5 V alkaline batteries.725Ex: Intrinsically SafeMultifunction CalibratorII 1 G Ex ia IIB 171 °CI.S. Class I, Div 1,Groups B-D, 171 °CSee page 37700PEx: IntrinsicallySafe Pressure ModulesII 1 G Ex ia IIC T4I.S. Class I, Div 1,Groups A-D T4See page 39574-NI NonincendiveInfrared Thermometer700G Series IntrinsicallySafe Pressure GaugesClass I, Division 2,Groups A, B, C, D;Class I, Zone 2 IICSee page 53II 3 G Ex ia IIB T6CSA Class I, Div. 2Groups A-D ratingSee page 40Ordering informationModelsModelsFLUKE-28 II Ex IS True-rms Multimeter FLUKE-707Ex IS Loop CalibratorFLUKE-718Ex IS Pressure Calibrator FLUKE-725Ex IS Multifuction Process CalibratorFLUKE-700PEx Pressure Modules (700P: 01, 5, 6, 9, 24, 27,29, A4Ex)FLUKE-574-NI Precision Infrared Thermometer w/Logging SWNonincendiveFLUKE-700GPressure test Gauge, (9) modelsFluke-700G04 0-15 psi, 1 BARFluke-700G05 0 to 30 psi, 2 BARFluke-700G06 0 to 100 psi, 7 BARFluke-700G27 0 to 300 psi, 20 BARFluke-700G07 0 to 500 psi, 34 BARFluke-700G08 0 to 1000 psi, 70 BARFluke-700G29 0 to 3000 psi, 200 BARFluke-700G30 0 to 5000 psi, 345 BARFluke-700G31 0 to 10000 psi, 690 BARCheck price and availability atwww.fluke.com/wtb40Process Calibration ToolsFor more information, go to www.fluke.com/ex

Fluke ScopeMeter ® Test ToolsHandheld oscilloscopes for industrial,instrumentation and electronic applicationsFluke 190-204 Fluke 190-202ScopeMeter test tools are the rugged, safe choice for awide variety of field service installation and maintenanceapplications. These handheld battery-poweredoscilloscopes are easy to use, with a built-in multimeter,paperless recording and analysis capabilities. They arerugged and IP 51 dust- and drip-proof rated to IEC529standards to withstand harsh environments.The new 190 Series II, with two and four isolated inputchannels and 60 MHz, 100 MHz or 200 MHz bandwidth,are ideal for industrial electronics, automation, processcontrol, and industrial machinery applications measuringthree-phase power electronic circuits, or three-axiscontrol systems comparing and contrasting multiplesignals simultaneously. These tools are safety rated atCAT III 1000 V/CAT IV 600 V with longer battery life andup-to-date USB interface technology.The 120 series with 20 MHz or 40 MHz bandwidth,dual DMMs and paperless recording is the optimal choicefor electrical and electro-mechanical applications, safetyrated to IEC EN61010-1 CAT III 600 V.For Industrial network applications, Fluke 125 or225C add industrial network physical layer analogmeasurement algorithms to validate the network bushealth.Fluke 124TMSelection guide120 Series ScopeMeter with Bus Health 190 Series II123 124 125 225C 190-062 190-102 190-202 190-104 190-204Bandwidth20 MHz • — — — — — — — —40 MHz — • • — — — — — —60 MHz — — — — • — — — —100 MHz — — — — — • — • —200 MHz — — — • — — • — •Input channels2Ch + 2 DMM • • • — — — — — —2Ch + DMM — — — • • • • — —4Ch — — — — — — — • •Isolated inputs — — — • • • • • •TriggeringConnect-and-View • • • • • • • • •Advanced triggering — — — • • • • • •Advanced measurement functionCursors — • • • • • • • •TrendPlot • • • • • • • • •ScopeRecord — — — • • • • • •100 screen replay — — — • • • • • •Industrial BusHealth — — • • — — — — —Harmonics — — • — — — — — —FFT — — — • • • • • •Power measurements — — • • • • • • •Waveform mathematics — — • • • • • • •EN61010-1 safetyCAT II 1000 V — — — • • • • • •CAT III 600 V • • • • • • • • •CAT III 1000 V — — — • • • • • •CAT IV 600 V — — — — • • • • •InterfaceOptical RS-232 • • • • — — — — —USB PC interface Opt Opt Opt Opt • • • • •USB memory port — — — — • • • • •PowerNi-MH • • • • — — — — —Li-Ion — — — — • • • • •Battery (hours) 7 7 7 4 4 (opt 8) 4 (opt 8) 4 (opt 8) 7 7General specificationsSize (HxWxD) 232 mm x 115 mm x 50 mm (9.2 in x 4.5 in x 2 in) 270 mm x 190 mm x 70 mm (10.5 in x 7.5 in x 2.8 in)Weight 1.2 kg (2.6 lb) 2.2 kg (4.8 lb)For more information, go to www.fluke.com/scopemeterScopeMeter Test Tools41

Fluke 123 and 124ScopeMeter ® Test ToolsConnect-and-View triggering for aninstant, stable displayScope users know how difficult triggeringcan be. Incorrect settings show unstableand sometimes incorrect results. Fluke’sunique Connect-and-View recognizes signalpatterns and automatically and continuouslysets up correct triggering. It providesa stable, reliable and repeatable display ofvirtually any signal.Use TrendPlot to help find intermittentsThe toughest faults to find are those thathappen only once in a while—intermittents.They can be caused by bad connections,dust, dirt, corrosion or simply broken wiringor connectors. Other factors, like line outagesand sags, can also cause a machine to stop.You may not be around to see it—your FlukeScopeMeter will. In this “paperless recorder”mode, you can plot the minimum and maximumpeak values and average over time—upto 16 days.Battery powered mobilityUp to seven hours of battery operation freesyou from mains outlets for true on-the-moveworking. The rugged and drip proof caseassures long life and reliable operation inthe harshest industrial environments.Safety ratedThe ScopeMeter 123 and 124 are safetyrated for measurements on CAT III 600 V rmsindustrial power systems with the includedtest leads.Three-in-one simplicityThe compact ScopeMeter 123 and 124 arethe rugged solution for industrial troubleshootingand installation applications.Each is a truly integrated test tool, withoscilloscope, multimeter and “paperless”recorder in one affordable, easy-to-useinstrument. Find fast answers to problemsin machinery, instrumentation, controland power systems.• Dual-input 40 MHz or 20 MHz digitaloscilloscope• Two 5,000-count true-rms digitalmultimeters• A dual-input TrendPlot recorder• Connect-and-View trigger simplicityfor hands-off operation• Shielded test leads for oscilloscope,resistance and continuitymeasurements• Up to seven hours battery operation• CAT III 600 V safety certified• Optically isolated RS-232 interface• IP 51 rated, rugged compact caseConnect-and-View captureseven the mostcomplex motordrive signals.Use TrendPlotto help findintermittents,fast.Dual inputoscilloscope,meter andpaperlessrecorder.Recommended accessoriesAC120Alligator Clip SetDP120Differential Probe KitRecommended kitSCC 120 Kit• Software• Cable• Hard carrying casei410AC/DC Current ClampSee page 62C125C195Soft Carrying CaseTool BagSee page 56 See page 56C75Accessory CaseSee page 56i30sAC/DC Current ClampSee page 63i5sAC Current ClampOrdering informationIncluded accessoriesTest lead set, alligator clips, hook clips, battery pack, batterycharger/line voltage adapter, BNC adapter, getting startedguide, users manual on CD.Test lead set, alligator clips, hook clips, battery pack, batterycharger/line voltage adapter, BNC adapter, OC4USB opticallyisolated RS-232 adapter/cable, FlukeView for ScopeMeterWindows® software, hard carrying case, getting startedguide, users manual on CD.ModelsFLUKE-124SFLUKE-124FLUKE-123SFLUKE-123SCC120Industrial ScopeMeter, 40 MHz, with SCC120 kitIndustrial ScopeMeter, 40 MHzIndustrial ScopeMeter, 20 MHz, with SCC120 kitIndustrial ScopeMeter, 20 MHzKit containing FlukeView software for Windows,USB interface adapter/cable and hard caseCheck price and availability atwww.fluke.com/wtb42ScopeMeter Test ToolsFor more information, go to www.fluke.com/scopemeter

Fluke 190 Series II ScopeMeter ® Test ToolsSee more, fix more, in harsh industrial environmentsGoes where ordinary scopes can’t goSafety rated for industrial applications, the 190Series ScopeMeter portable oscilloscopes combinerugged portability with high performance to takeyou all the way from troubleshooting microelectronicsto power electronic applications.The first high-performance four-channel scopesbuilt for harsh industrial environmentsFor the first time, plant maintenance engineers andtechnicians can take a high-performance fourchannelscope into the harsh world of industrialelectronics. The new Fluke 190 Series II is the onlyportable oscilloscope with two or four independentisolated input channels, a CAT III 1000 V/CAT IV600 V safety rating, and sealed case IP 51 dustproofand drip-proof rated.• 60 MHz, 100 MHz or 200 MHz bandwidth• 2 or 4 independent isolated inputs, up to 1000 VFluke 190-204• High-speed sampling: Up to 2.5 GS/sec• Deep memory: 10,000 points per trace waveformcapture• CAT III 1000 V/CAT IV 600 V safety rated forhigh voltage environments• 5,000 count multimeter 2 channel models or 999 count volt meter 4 channel models• Li-Ion battery and easy-access battery door for extended usage• Isolated USB host port for direct data storage to a USB memory• USB-B-device port for PC connectivity• Sealed compact case weighing only 2.2 kg (4.8 lb)Sample screensConnect-and-View captures even the most complexmotor drive signals.Automatic capture and replay of100 screensScopeMeter users know how frustratingit is to see a one-time anomaly flashby—never to be seen again. Not with theScopeMeter 190 Series II. Now you can lookback in time with a touch of the replaybutton. In normal use, the instrument continuouslymemorizes the last 100 screens,on a first in-first out basis. At any momentyou can “freeze” the last 100 screens andscroll through picture-by-picture or replayas a “live” animation. Cursors can be usedfor further analysis.ScopeRecord mode for high-resolutionwaveform recording up to 48 hoursScopeRecord memory stores up to 27,000data points per channel, capturing fastintermittents and glitches as short as 8ns.• Stores events like motion profiles, UPS,power supply and motor start-ups• In Stop On Trigger mode, ScopeMeterautomatically recognizes a power failureand stores the waveform data• With the waveform zoom (up to 100x)you can look at the smallest details, likeindividual power cyclesTrendPlot Paperless RecorderThe toughest faults to find are those thathappen once in a while. These intermittentscan be caused by bad connections,dust, dirt, corrosion, or simple brokenwiring or connectors. Line outages, sagsor starting and stopping of a motor canalso cause a machine to stop. You may notbe around when it happens, but the FlukeScopeMeter will.• Plot minimum and maximum plot valuesand average over time up to 16 days• Plot any combination of voltages, amps,temperature, frequency and phase forall four inputs, all with time and datestamp to pinpoint faultsUse the 27,000 points memory of ScopeRecord andzoom in for maximum detail.Cursors and zoom features of the Fluke 190 Series IIhelp you to analyze the captured TrendPlot.Ordering informationIncluded accessoriesBattery charger/mains adapter,Li-Ion battery pack, voltageprobe sets (each set includesground lead, hook clip, groundspring and probe tip insulationsleeve, test leads, handstrapaffixed to instrument,hangstrap (user selectable forleft- or righthand use), multilanguageusers manuals onCD-ROM, FlukeView ® demopackage (with restrictedfunctionality), USB interfacecable for PC connectivity.ModelsFLUKE-190-204FLUKE-190-204/SFLUKE-190-104FLUKE-190-104/SFLUKE-190-202FLUKE-190-202/SFLUKE-190-102FLUKE-190-102/SFLUKE-190-062FLUKE-190-062/SColor ScopeMeter, 200 MHz, 4 channelsColor ScopeMeter, 200 MHz, 4 channels, with SCC-290 kit includedColor ScopeMeter, 100 MHz, 4 channelsColor ScopeMeter, 100 MHz, 4 channels, with SCC-290 kit includedColor ScopeMeter, 200 MHz, 2 channels plus DMM/Ext.inputColor ScopeMeter, 200 MHz, 2 channels plus DMM/Ext.input, with SCC-290 kit includedColor ScopeMeter, 100 MHz, 2 channels plus DMM/Ext.inputColor ScopeMeter, 100 MHz, 2 channels plus DMM/Ext.input, with SCC-290 kit includedColor ScopeMeter, 60 MHz, 2 channels plus DMM/Ext.inputColor ScopeMeter, 60 MHz, 2 channels plus DMM/Ext.input, with SCC-290kit included5,000 count dedicated digital multimeter on 2 channelmodels.Check price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/scopemeterScopeMeter Test Tools43

Fluke 225C and 125ScopeMeter ® Test ToolsFluke 225CThe Fluke 225C and 125 arethe instruments of choice formaintenance specialists whodeal with industrial busesand networks as well asgeneral electronics. You canverify the electrical integrityof your bus and networkphysical layer, performingtests and getting answersto digital signalling issuesquickly and easily.These instruments offerall the functions found in theFluke 125120 or 190C Series, plus added measurementcapabilities for industrial networks such asProfi®, Foundation, Modbus®, CAN-bus, AS-ibus, RS-485 and more.Bus Health physical layer application measurescritical digital signal amplitude, timeand noise or distortion characteristics. Finderrors like signal attenuation and distortioncaused by improper cable connections, badcontacts, incorrect grounding, and missingor superfluous terminators. Signal integrityanalysis is extended with the eye-pattern mode. A waveform display is built oversuccessive signal passes to give you a visual indication of overall signal quality, noiselevels, and signal jitter.• Critical bus physical layer amplitude, time and noise or distortion measurements• Compare measurement results to limits defined by the industry standard• Display clear “good”, “weak” or “bad” indicators.• Eye pattern mode to visually inspect waveforms quality oftransmitted data packets• The Fluke 225C with isolated inputs perform floating differentialmeasurements on balanced two wire bus systems• 125 dual input measurements performed relative to commonreference point• BHT190 breakout adapter set DB9, RJ45 and M12 simplifyprobing onto bus signal connectorsSample screensMeasure critical signal characteristics, compare toindustry standard.Use “eye” diagrams to inspect for issues like signalnoise, distortion and other common disturbances.Recommended accessoriesBHT190Bus Health Test Adapter,DB-9 and M-12i30SAC/DCCurrent ClampSee page 63SpecificationsFluke 225C(200 MHz 199C)••Fluke 125(40 MHz 124)Dual isolated inputs for differential bus system probingOn screen bus system probe connection diagramsBus Health AS-i • •PhysicalLayerCAN-bus (ISO-11898) (DeviceNet) • •Standards Interbus S (EIA-485)•ControlNet (61158 type 2)•Modbus (EIA-232, EIA-485) • •Foundation Fieldbus H1 (61158 type 1) • •Profibus DP (EIA-485), PA (61158 type 1) • •Ethernet 10Base2 (coax), 10BaseT (UTP)•Ethernet 100BaseT (100 Mb/s)•RS-232 (EIA-232), RS-485 (EIA-485) • •Measured parametersBias Voltage Level, signal amplitude,pulse width or baud rate, rise/ fall time, jitter,signal distortion, noise HF, noise LF, in-bandnoiseBaud rate, rise/falltime, high level,low level, distortion,amplitude, jitterEye diagram “qualitative” waveform analysis•BusHealth breakout adapter set BHT190 included BHT190 optionali410AC/DC Current ClampSee page 62AS400Probe Accessory Seti5sAC Current ClampVPS420-RVoltage Probe SetOrdering informationIncluded accessories ModelsTest lead set, battery FLUKE-225C/003charger/line voltageFLUKE-225C/003Sadapter, battery pack(installed), gettingstarted guide, multilingualusers manual FLUKE-125SFLUKE-125on CD.Color ScopeMeter (200 MHz, 2.5 GS/s) with Bus Health test capabilities built-inColor ScopeMeter (200 MHz, 2.5 GS/s) with Bus Health test capabilities built-in,with SCC190 kitIndustrial ScopeMeter, Bus Health, Power and HarmonicsIndustrial ScopeMeter, Bus Health, Power and Harmonics with SCC-KitCheck price and availability atwww.fluke.com/wtb44ScopeMeter Test ToolsFor more information, go to www.fluke.com/scopemeter

Ti Series Industrial Thermal ImagersThe ultimate tools for troubleshooting and maintenanceTi32 shown withoptional telephoto lensThe perfect tools to add to your problem solving arsenal. Builtfor tough work environments, these high-performance, fullyradiometric imagers are ideal for troubleshooting electrical systems,electro-mechanical equipment, process equipment, HVAC/Requipment and others.• Enhanced problem detection and analysis capabilities withpatent-pending IR-Fusion® Technology—only available fromFluke• Optimized for field use in harsh work environments– Engineered and tested to withstand a 2 m (6.5 ft) drop– Withstands dust and water—tested to an IP 54 rating– Innovative protective lens cover protects the lens whennot in use• Delivers the clear, crisp images needed to find problems fast– Identify even small temperature differences that couldindicate problems with excellent thermal sensitivity (NETD)– Even the smallest details become visible with the large,widescreen full color LCD display• Intuitive, three-button menu is easy to use... simply navigatewith the push of a thumbSee page 48 recommended accessories—only available from Fluke.Fluke Ti9 – price andperformance for the costconscious userJust point andshoot to find thehotspots thatwarn of imminentequipment failure.160 x 120 resolutionshows all theessential detailsand increases thespeed of inspecting,repairing electricaland (electro)mechanicalequipment.Fluke Ti9SpecificationsFeatures Ti32 Ti29 Ti27 Ti25 Ti10 Ti9Temperature measurement range(not calibrated below -10 °C)Temperature measurementaccuracy-20 °C to +600 °C (-4 °F to +1112 °F)± 2 °C or 2 % (at 25 °C nominal, whichever is greater)-20 °C to +350 °C (-4 °F to+662 °F)-20 °C to +250 °C (-4 °F to +482 °F)On-screen emissivity correction Yes In software onlyOn-screen reflected backgroundtemperature compensationYesIn software onlyOn-screen transmission correction Yes —Image capture frequency 9 Hz refresh rate or 60 Hz refresh rate depending upon model variation 9 Hz refresh rateDetector type320 X 240 Focal Plane Array,uncooled microbolometer280 x 210 Focal Plane Array,uncooled microbolometer240 x 180 Focal Plane Array,uncooled microbolometer160 X 120 Focal Plane Array, uncooled microbolometerThermal sensitivity (NETD)≤ 0.45 °C at 30 °C targettemp. (45 mK)0.05 °C at 30 °C target temp. (50 mK) 0.09 °C at 30 °C targettemp. (90 mK)0.13 °C at 30 °C targettemp. (130 mK)± 5 °C or 5 % (at 25 °C nominal,whichever is greater)0.20 °C at 30 °C targettemp. (200 mK)Field of view (standard lens) 23 ° x 17 °Spatial resolution (IFOV) 1.25 mRad 1.43 mRad 1.67 mRad 2.50 mRadOptional telephoto infrared lens Yes —Optional wide-angle infrared lens Yes —Standard palettesIronbow, Blue-Red, HighIronbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal,Ironbow, Blue-Red,Contrast,Grayscale, Grayscale InvertedHigh Contrast, GrayscaleAmber, Hot Metal, GrayscaleUltra Contrast palettesIronbow Ultra, Blue-Red Ultra, High Contrast Ultra, Amber Ultra, Amber Inverted Ultra, HotMetal Ultra, Grayscale Ultra, Grayscale Inverted Ultra—IR-Fusion® Yes No IR-FusionColor alarms (user-selectable) High-temperature alarm —Voice annotation 60 seconds maximum recording time per image; reviewable playback on imager —Storage mediumSD Memory Card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60 seconds voice annotations, or 3000 basic bitmap (.bmp) images,or 3000 jpeg (.jpeg) images; transferrable to PC via included multi-format USB card readerExport file formatsw/SmartView® softwareBMP, DIB, GIF, JPE, JFIF, JPEG, JPG, PNG, TIF, and TIFFBMP, EMF, EXIF, GIF, JPEG, PNG, TIFF, and WMFBatteriesAC battery chargingAC operationEnclosure ratingDrop testedWarrantyTwo Lithium Ion rechargeable smart battery packs with 5-segment LED Display to showcharge level. Battery life: 4+ hours; Battery charge: 2.5 hours to full chargeTwo-bay AC battery charger (110 V ac to 220 Vac, 50/60 Hz) (included), or in-imager charging,ac mains adapters includedInternal rechargeable battery pack (included). Battery life: 3-4 hours.Battery charge: 2.5 hours to full chargeAC adapter/charger (110 V ac to 220 V ac, 50/60 Hz) (included), charges battery whileimager is operating or turned off, ac mains adapters includedAC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz), ac mains adapters includedIP542 m (6.5 ft)Two-yearOrdering informationIncluded accessoriesAC power supply and battery charger (including mains adapters); SDmemory card, multi format USB memory card reader for downloadingimages to your computer, SmartView® software with free upgrades forlife, rugged, hard carrying case, soft transport bag, adjustable handstrap, printed users manual, warranty registration card. Ti32, TI29, Ti27also come with two, rugged lithium-ion smart battery packs.Heavy duty carrying case, 2 rechargeable battery packs, battery charger,ac adapter, video cable, 512 MB compact flash card, compact flash cardreader and USB cable, neck strap, SmartView reporting and analysissoftware on CD, users manual on CD and calibration certificate.ModelsFLK-Ti32 9 HzFLK-Ti32 60 HzFLK-Ti29 9 HzFLK-Ti29 60 HzFLK-Ti27 9 HzFLK-Ti27 60 HzFLK-Ti25 9 HzFLK-Ti10 9 HzFLK-Ti9 9 HzFLK-Ti50FT-20FLK-Ti55FT-20Industrial-Commercial Thermal ImagerIndustrial-Commercial Thermal ImagerIndustrial-Commercial Thermal ImagerIndustrial-Commercial Thermal ImagerIndustrial-Commercial Thermal ImagerIndustrial-Commercial Thermal ImagerThermal ImagerThermal ImagerThermal ImagerIR FlexCam Thermal ImagerIR FlexCam Thermal ImagerCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/thermal_imagingThermal Imaging45

Fluke Ti125 and Ti110Industrial-commercial thermal imagersPerform infrared inspections faster and moreefficiently, and thoroughly document problemareas with these new thermal imagers.• Exclusive IR-OptiFlex focus system—ensuresthat images are in good focus from 1.2 meters(4 feet) and beyond. For shorter distanceschange to manual mode with the touch of afinger (Ti110 and Ti125).• Always have references handy—IR-PhotoNotesannotation system (Ti110 and Ti125).• Find problems faster and easier—IR-Fusion®with AutoBlend mode (Ti125 only).• Multi-mode video recording—focus-freevideo in visible light and infrared with fullIR-Fusion. (Ti110 and Ti125 only).• Easily communicate the location of problemswith the Electronic Compass—8-Point Cardinal(Ti110 and Ti125).New features – Ti1XX SeriesThe Fluke IR-OptiFlex tmfocus system differenceFluke Ti125Fluke Ti110See recommended accessories on page 48.Fluke TiR125 and TiR110Building diagnostic thermal imagersFrom 1.2 m (4 ft) and beyond,you’re in clear focus.Fluke TiR125Fluke TiR110Whether you’re searching for air leaks, hiddenmoisture, construction defects, or other buildingissues, a Fluke thermal imager delivers a hugecompetitive advantage—it allows you to workfaster and more efficiently, and document yourfindings.• Exclusive IR-OptiFlex focus system (TiR110and TiR125).• IR-PhotoNotes annotation system—quicklyidentify and keep track of inspectionlocations (TiR110 and TiR125).• Find problems faster and easier—IR-Fusion®with AutoBlend mode (AutoBlend onlyavailable on the TiR125).• Multi-mode video recording—focus-free video(TiR110 and TiR125 only).• Easily communicate the location of problemswith the Electronic Compass—8-PointCardinal (TiR125 and TiR110).See recommended accessories on page 48.Plus, you have the option tomanually focus for closer views.Electronic CompassMake sure you and others know thelocation of the problem. Compassreadings easily appear in imagesand reports.Fluke TiR100General use thermal imagerPerfect general use camera designed for value consciousprofessionals.• Rugged, lightweight, point-and-shoot• Focus-free infraredSee recommended accessories on page 48.Fluke Ti100Check price and availability atwww.fluke.com/wtb46Thermal ImagingFor more information, go to www.fluke.com/thermal_imaging

Industrial-commercial thermal imagersSpecificationsIndustrial-Commercial Models Ti125 Ti110 Ti100IR resolution (FPA size)160 x 120 FPA uncooled microbolometerCapture or refresh rate 9 Hz or 30 Hz versions 9 HzNETD (Thermal sensitivity)≤ 0.10 °C at 30 °C target temp (100 mK)FOV (Field of view) 22.5 °H x 31 °VIFOV (Spatial resolution)Temperature measurement range(not calibrated below -10 °C)Temperature measurement accuracyFocus mechanismIR-Fusion® technology3.39 mRad-20 °C to +350 °C (-4 °F to+662 °F)-20 °C to +250 °C (-4 °F to +482 °F)± 2 °C or 2 % (at 25 °C nominal, whichever is greater)IR-OptiFlex focus systemFocus-free 1.2 m (4 ft) andbeyondPIP, FULL IR, FULL VISIBLE,AutoBlendPIP, FULL IR, FULL VISIBLENo, full IR only2 GB SD memory cardmini USB download direct to PC-10 °C to +50 °C (14 °F to 122 °F)-20 °C to +50 °C (-4 °F to 122 °F)Operating and storage 10 % to 95 %, non-condensingMemory storageDirect download capabilityOperating temperature rangeStorage temperature rangeOperating humidityVibration and shock 2G, IEC 68-2-26 and 25G, IEC 68-2-29Drop tested2 m (6.5 ft)Standard warranty periodTwo-yearsExtended warranty and service plansYesOrdering informationNew features cont.IR-PhotoNotesannotation systemAdd up to threedigital photos perinfrared imageto preciselydocument andclarify potentialproblems.Included accessoriesThermal imagers are shipped with ac power adapter, lithium ion smartbattery (Ti125 includes 2 each, other models 1 each), USB cable, SDmemory card, hard carrying case, soft transport bag, adjustable handstrap (left- or right-handed use), printed users manual, all other manualson CD, SmartView® software and warranty registration card. Ti125models also include a two-bay charging base and a multi-format USBmemory card reader.ModelsFLK-Ti125 30 HzFLK-Ti125 9 HzFLK-Ti110 30 HzFLK-Ti110 9 HzFLK-Ti100 9 HzIndustrial-Commercial Thermal ImagerIndustrial-Commercial Thermal ImagerIndustrial-Commercial Thermal ImagerIndustrial-Commercial Thermal ImagerGeneral Use Thermal ImagerIR-Fusion ® technologyThe industry’s first point-and-shootIR-Fusion technology camera givesyou aligned digital and infraredimages every time.Building diagnostic thermal imagersSpecificationsBuilding Diagnostic Models TiR125 TiR110 Ti100IR resolution (FPA size)160 x 120 FPA uncooled microbolometerCapture or refresh rate9 HzNETD (Thermal sensitivity)≤ 0.08 °C at 30 °C target temp (80 mK)≤ 0.10 °C at 30 °C target temp(100 mK)FOV (Field of view) 22.5 °H x 31 °VIFOV (Spatial resolution)3.39 mRadTemperature measurement range(not calibrated below -10 °C)Temperature measurement accuracy-20 °C to +150 °C(-4 °F to +302 °F)-20 °C to + 250 °C(-14 °F to 482 °F)± 2 °C or 2 % (at 25 °C nominal, whichever is greater)Focus mechanismIR-OptiFlex focus systemFocus-free 1.2 m (4 ft) andbeyondIR-Fusion® technologyPIP, FULL IR, FULL VISIBLE,AutoBlendPIP, FULL IR, FULL VISIBLENo, full IR onlyMemory storage2 GB SD memory cardDirect download capabilitymini USB direct downloadOperating temperature range-10 °C to +50 °C (14 °F to 122 °F)Storage temperature range-20 °C to +50 °C (-4 °F to 122 °F)Operating humidityOperating and storage 10 % to 95 %, non-condensingVibration and shock 2G, IEC 68-2-26 and 25G, IEC 68-2-29Drop tested2 m (6.5 ft)Standard warranty periodTwo-yearsExtended warranty and service plansYesExcellent alignment in Picture-in-Picture mode.Ordering informationExclusive AutoBlend mode alignsdigital and infrared images into asingle view.Included accessoriesThermal imagers are shipped with ac power adapter, lithium-ion smartbattery (TiR125 includes 2 each, other models 1 each), USB cable, SDmemory card, hard carrying case, soft transport bag, adjustable handstrap (left- or right-handed use), printed users manual, all other manualson CD, SmartView® software and warranty registration card. TiR125models also include a two-bay charging base and a multi-format USBmemory card reader.ModelsFLK-TiR125 9 HzFLK-TiR110 9 HzFLK-Ti100 9 HzBuilding Diagnostic Thermal ImagerBuilding Diagnostic Thermal ImagerGeneral Use Thermal ImagerCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/thermal_imagingThermal Imaging47

Fluke SmartView ® SoftwareAnalysis and reporting softwarePowerfulEverything you need for analysis andreporting.• Extensive annotation, editing andviewing options with full IR-Fusion®capabilities• Multiple reporting options and templatesand 3D-IR for unique 3D analysisView, optimize and analyzeinfrared video recordings• SmartView tools and controls allow easyaccess to editing functions anddrag-and-drop text annotation feature• Report Wizard guides you through automatic,professional report generationRecommended accessoriesBOOK-ITPFLK-LENS/TELE1Introduction toTelephoto InfraredThermography Lens (Ti32, TiR32, Ti29,Principles Book TiR29, Ti27 and TIR27 only)Fluke Training SolutionsGetting started with Fluke Ti Thermal ImagersUnsure where to begin withyour new thermal imager?Don’t worry. Fluke utilizes an extensivenetwork of industry experts to deliver afull portfolio of training solutions.• Free online webinars• Hands-on training seminars• Advanced trainingVisit www.fluke.com/titraining fortraining options and schedules.Fluke IR-WindowsGot switchgearFluke CLKTFluke CLVFluke CLKTOSpecificationsFluke authorized trainingis provided by our partner,Why open enclosures and expose yourself toarc flash hazards when you don’t have to?NFPA 70E compliant infrared inspections are time consuming andpainful without IR Windows. So skip the headache of lock-out/tag-out, live work permits and cumbersome PPE. IR Windowsprovide increased safety, speed and frequency of inspection.Fluke IR Windows offer NFPA 70E compliance withouthaving to compromise on product performance:• ClirVu® optic – Gives you a clear, unobstructed view• AutoGround – Effortless compliance with groundingrequirements• Ease of installation – Installs quickly andeasily to the front of the panel onlyFLK-LENS/WIDE1Wide-Angle Infrared Lens(Ti32, TiR32, Ti29, TiR29,Ti27 and TIR27 only)TI-VISORThermal Imager Sun Visor(all models except FlexCam)TI-CAR-CHARGERThermal Imager Car Charger(all models except FlexCam)TI-SBP3Smart Battery Pack(Ti32, TiR32, Ti29, TiR29,Ti27 and TiR27 only)TI-SBC2 103232Charging BaseAnti-Glare Hood(Ti32, TiR32, Ti29, TiR29, (FlexCam models only)Ti27 and TIR27 only)104543 TI-SBCCar ChargerBattery Charger(FlexCam models only) (FlexCam models only)TI-SBPRechargeable Battery Pack(FlexCam models only)For models Ti125,TiR125, Ti110, TiR110,Ti100 onlyTI-TRIPODTi Tripod Mounting Base(all models except FlexCam)OutdoorIndoorFLK-050-CLKT FLK-075-CLKT FLK-100-CLKT FLK-075-CLKTOCrystal insert diameter 50 mm(1.97 in) 73 mm (2.96 in) 100 mm (3.94 in) 75 mm (2.96 in)Viewing aperture diameter 43 mm (1.7 in) 68 mm (2.7 in) 89 mm (3.5 in) 68 mm (2.7 in)Viewing aperture area 1452 mm 2(2.25 in 2 )WarrantyOrdering information3632 mm 2(5.63 in 2 )6322 mm 2(9.79 in 2 )Lifetime replacement against manufacturing defectsFor more detailed specifications download datasheets at www.fluke.com\irwindows3632 mm 2(6.36 in 2 )TI-SBC3External Charging Baseand Power SupplyTI-VISOR2Sun VisorTI-TRIPOD2Tripod MountingAccessoryIncluded accessoriesInstallation CD, self-adhesive drilling template,security access key, warranty statement.ModelsFLK-075-CLKTFLK-050-CLKTFLK-100-CLKTFLK-075-CLKTO75 mm (3 in) C-Range IR Window, Kwik Twist50 mm (2 in) C-Range IR Window, Kwik Twist100 mm (4 in) C-Range IR Window, Kwik Twist75 mm (3 in) Kwik-twist aluminium cover KTCheck price and availability atwww.fluke.com/wtb48Thermal ImagingFor more information, go to www.fluke.com/thermal_imaging

Ti Series Buildings Thermal ImagersOptimized for energy audits and moisture detectionTiR32 shown withoptional wide angle lensThe ultimate tools for energy audits, building maintenance,restoration and remediation.• Enhanced problem detection and analysis capabilities withpatent-pending IR-Fusion® Technology—only available from Fluke• Optimized for field use– Engineered and tested to withstand a 2 m (6.5 ft) drop– Withstands dust and water—tested to an IP 54 rating– Innovative protective lens cover protects the lens whennot in use• Delivers the clear, crisp images needed to find problems fast– Identify even small temperature differences that couldindicate problems with excellent thermal sensitivity (NETD)– Even the smallest details become visible with the large,widescreen full color LCD display• Intuitive, three-button menu is easy to use... simply navigatewith the push of a thumbSee page 48 recommended accessories—only available from Fluke.Fluke TiSBuilding DiagnosticsThermal ImagerThe new FlukeTIS is thetop-performingimager in itsprice classand meets theproposed RESNETinfrared inspectionstandards.• 120 x 120 resolution• Largest display in priceclass, 30 % larger thancomparable models• Award winning design,built rugged to withstand2 m (6.5 ft) dropFluke TiSSpecificationsFeatures TiR32 TiR29 TiR27 TiR1 TiR TiSTemperature measurement range(not calibrated below -10 °C)Temperature measurementaccuracy-20 °C to +150 °C (-4 °F to +302 °F)± 2 °C or 2 % (at 25 °C nominal, whichever is greater)-20 °C to +100 °C (-4 °F to+212 °F)± 5 °C or 5 % (at 25 °C nominal,whichever is greater)On-screen emissivity correction Yes In software onlyOn-screen reflected backgroundtemperature compensationYesIn software onlyOn-screen transmission correction Yes —Image capture frequency 9 Hz refresh rate or 60 Hz refresh rate depending upon model variation 9 Hz refresh rateDetector type320 X 240 Focal Plane Array, 280 x 210 Focal Plane Array, 240 x 180 Focal Plane Array,120 X 120 Focal Plane Array,160 X 120 Focal Plane Array, uncooled microbolometeruncooled microbolometer uncooled microbolometer uncooled microbolometeruncooled microbolometerThermal sensitivity (NETD)≤ 0.04 °C at 30 °C targettemp. (40 mK)≤ 0.045 °C at 30 °C target temp. (45 mK)0.07 °C at 30 °C targettemp. (70 mK)0.09 °C at 30 °C targettemp. (90 mK)0.1 °C at 30 °C target temp.(100 mK)Field of view (standard lens) 23 ° x 17 °; Minimum focus distance: 15 cm (approx. 6 in) 17° x 17°Spatial resolution (IFOV) 1.25 mRad 1.43 mRad 1.67 mRad 2.50 mRadOptional telephoto infrared lens Yes —Optional wide-angle infrared lens Yes —Standard palettesIronbow, Blue-Red, HighIronbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal,Ironbow, Blue-Red,Contrast, Amber, Hot Metal,Grayscale, Grayscale InvertedHigh Contrast, GrayscaleGrayscaleIronbow, Blue-Red, GrayscaleUltra Contrast palettesIronbow Ultra, Blue-Red Ultra, High Contrast Ultra, Amber Ultra, Amber Inverted Ultra, HotMetal Ultra, Grayscale Ultra, Grayscale Inverted Ultra—IR-Fusion® Yes No IR-FusionColor alarms (user-selectable) Dewpoint temperature alarm —Voice annotation 60 seconds maximum recording time per image; reviewable playback on imager —Storage mediumSD Memory Card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60 seconds voice annotations, or 3000 basic bitmap (.bmp)images, or 3000 jpeg (.jpeg) images; transferrable to PC via included multi-format USB card readerExport file formatsw/SmartView® softwareBMP, DIB, GIF, JPE, JFIF, JPEG, JPG, PNG, TIF, and TIFFBatteriesAC battery chargingAC operationEnclosure ratingDrop testedWarrantyTwo Lithium Ion rechargeable smart battery packs with 5-segment LED Display to showcharge level. Battery life: 4+ hours; Battery charge: 2.5 hours to full chargeTwo-bay AC battery charger (110 V ac to 220 Vac, 50/60 Hz) (included), or in-imagercharging, ac mains adapters includedInternal rechargeable battery pack (included). Battery life: 3-4 hours.Battery charge: 2.5 hours to full chargeAC adapter/charger (110 V ac to 220 V ac, 50/60 Hz) (included), charges battery whileimager is operating or turned off, ac mains adapters includedAC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz), ac mains adapters includedIP542 m (6.5 ft)Two-yearOrdering informationIncluded accessoriesAC power supply and battery charger (including mains adapters), SDmemory card, multi format USB memory card reader for downloadingimages to your computer, SmartView® software with free upgrades forlife, hard carrying case, soft transport bag, adjustable hand strap, printedusers manual, warranty registration card. Ti32, TI29, Ti27 also come withtwo, rugged lithium-ion smart battery packs.Heavy duty carrying case, two rechargeable battery packs, battery charger,ac adapter, video cable, 512 MB compact flash card, compact flashcard reader and USB cable, neck strap, SmartView reporting and analysissoftware on CD, User manual on CD and calibration certificate.ModelsFLK-TiR32 9 HzFLK-TiR32 60 HzFLK-TiR29 9 HzFLK-TiR29 60 HzFLK-TiR27 9 HzFLK-TiR27 60 HzFLK-TIR1 9 HzFLK-TIR 9 HzFLK-TiS 9 HzFLK-TiR3/FT-20FLK-TiR4/FT-20Building Diagnostics Thermal ImagerBuilding Diagnostics Thermal ImagerBuilding Diagnostics Thermal ImagerBuilding Diagnostics Thermal ImagerBuilding Diagnostics Thermal ImagerBuilding Diagnostics Thermal ImagerThermal ImagerThermal ImagerIR BD Thermal ImagerIR FlexCam BD Thermal ImagerIR FlexCam BD Thermal ImagerCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/thermal_imagingThermal Imaging49

Fluke 1523/1524 ReferenceThermometersThe 1523/1524 Reference Thermometers fromFluke Calibration measure, graph and recordPRTs, thermocouples and thermistors. You canmeasure up to 0.3 seconds per sample and plotand scale trends in real time. Both thermometershave memory for up to 25 readings withstatistics. The 1524 has two inputs with datalogging memory for 15,000 measurementswith date and time stamps.• High accuracy: PRTs: ± 0.011 °C;Thermocouples: ± 0.24 °C;Thermistors: ± 0.002 °C• A simple user interface to see trends quickly• Smart connectors to load probe informationautomatically• Use a PC and optional LogWare II software tomonitor and log more data over timeRecommended accessories1523/15245616-12-P5610-9-PPrecision PRTPrecision Thermistor305 mm x 6.35 mm 229 mm x 3.2 mm(12 in x .25 in) (9 in x 1/8 in)Fluke 1524Fluke 15232373-LTCSmart Connectorwith universalTC adapterFLK80K180PK-1 Type KProbe and Adapter(2373-LTC)1551A/1552A “Stik” Thermometers1551A/1552ABest substitute for precision mercury-filledglass thermometersFinally, a digital substitute for your mercury-in-glassthermometers! Accurate and repeatable to ± 0.05 °Cover its full range, the 1551A/1552A “Stik” Thermometeris the new gold standard of industrial temperaturecalibration. Whether working outdoors in environmentswhere potentially explosive gases may be present or onthe floor of a processing plant, the intrinsically-safe,battery operated, portable reference thermometer isdesigned to go where you work.• Accuracy of ± 0.05 °C (± 0.09 °F) over full range• Intrinsically safe (ATEX and IECEx compliant)• Two models to choose from (-50 °C to 160 °C or -80 °Cto 300 °C)TPAKMagnetic Meter HangerSee page 642373-LPRTLemo to Mini Grabbers(4-wire) Adapter1523-CASE 2384-P, 2384-T1523/1524 Readout INFO-CON Connectors, PRTand Probe Carrying Case (gray cap) or TC (blue cap)Recommended accessories1551A/1552ASpecificationsTemperatureAccuracy – 1523/1524 with5616-12 PRTAccuracy – 1523/1524 with5610-9 Thermistor-200 °C (-328 °F) 0.014 —0 °C (32 °F) 0.021 0.009100 °C (212 °F) 0.027 0.030300 °C (572 °F) 0.040 —420 °C (788 °F) 0.050 —Equivalent temperature readout accuracy for measuring type K thermocouples is ± 0.24 °C (± 0.43 °F) from 0 °C to 1370 °C(32 °F to 2498 °F) and ± 0.61°C (± 1.10 °F) from –200 °C to 0 °C (–328 °F to 32 °F). Additional errors for thermocouple accuracyor calibration must be added separately.1551-CASECarrying CaseOrdering informationIncluded accessoriesModels12 V dc universal power supply, FLUKE-1524Thermometer Readout (2 inputs)RS-232 cable, NIST traceablecalibration certificate, technical manualFLUKE-1523Thermometer Readout (1 input)and 9940 IO ToolKit software on CD,three AA batteries, users guide.TPAK, 2373-LTC, carrying case. FLUKE-1524-P1 1524 Bundled with 5616 PRTFLUKE-1523-P11523 Bundled with 5616 PRTNVLAP-accredited report of calibration,1551A-9 Thermometer, Fixed RTD, -50 °C to 160 °C, 3/16 x 9 inuser’s guide on CD-ROM, 3 AAAbatteries.1551A-12 Thermometer, Fixed RTD, -50 °C to 160 °C, 1/4 x 12 in1552A-12 Thermometer, Fixed RTD, -80 °C to 300 °C, 1/4 x 12 inModel number appended with a -9, -12, -20 indicates probe sheath length in inches. All probe diameters are 6.35 mm (1/4 in) withthe exception of the 1551A-9, which is 4.8 mm diameter (3/16 in).Check price and availability atwww.fluke.com/wtb50Temperature CalibrationFor more information, go to www.fluke.com

Fluke CalibrationTemperature Sources9103/9140/9141 FieldDry-Well Calibrators• Lightweight and very portable• Three models ranging from –25 °C to 650 °C• Accuracy to ±0.25 °CRecommended accessories9142-CASECarrying Case9936A LogWare IIITemperature DataLogging Software9142/9143/9144Field Metrology WellsSmall dry wells for big field applications• Lightweight, portable, and fast• Cool to -25 °C in 15 minutes and heat to 660 °C in 15minutes• Built-in two-channel readout for PRT, RTD, thermocouple,4-20 mA current4180-CASECarrying Case4181-DCASCarrying Case w/wheelsOrdering information4180/4180 PrecisionInfrared ThermometersAccredited performance for point-andshootcalibrations• Calibrated radiometrically for meaningful, consistentresults• Accredited calibration included• Accurate, reliable performance from -15 °C to 500 °CModelsSpecify X, X = A, B, C, or D included insert9103-X9140-XField Dry-Well Calibrator, –25 °C to 140 °CField Dry-Well Calibrator, 35 °C to 350 °CInsert A: 1/16” (1.6 mm), 1/8” (3.2 mm),3/16” (4.8 mm), 1/4” (6.35 mm),3/8” (9.5 mm) and 1/2” (12.7 mm)9141-X Field Dry-Well Calibrator, 50 °C to 650 °CInsert B: 2 at 3/16” (4.8 mm), 2 at 1/4”(6.35 mm), and 2 at 3/8” (9.5 mm)Insert C: 6 at 1/4” (6.35 mm)Insert D: 2 at 3 mm, 2 at 4 mm, and 2at 6 mmModels9142-X Field Metrology Well, -25 °C to 150 °C 9142-INSA9142-INSB9142-X-P Field Metrology Well, -25 °C to 150 °C, process version 9142-INSC9143-X Field Metrology Well, 33 °C to 350 °C 9143-INSA9143-INSB9143-X-P Field Metrology Well, 33 °C to 350 °C, process version9143-INSC9144-X Field Metrology Well, 50 °C to 660 °C 9144-INSA9144-INSB9144-X-P Field Metrology Well, 50 °C to 660 °C, process version9144-INSCWell insertsX in the model number to be replaced with A, B,C, D, E, or F as appropriate for the desired insert.Insert A, 9142, misc holesInsert B, 9142, comp holesInsert C, 9142, 6 x 0.25 in holesInsert A, 9143, misc holesInsert B, 9143, comp holesInsert C, 9143, 6 x 0.25 in holesInsert A, 9144, misc holesInsert B, 9144, comp holesInsert C, 9144, 6 x 0.25 in holes1620A DigitalThermometer-HygrometerThe most accuratetemperature and humiditygraphical data logger onthe market• Superior accuracy• Network enabled• Powerful logging and analysistoolsIncluded accessoriesReport of Calibration (NVLAP accredited),power cord, user’s guide, documentationCD, target cover, serial cable.Models4180 Precision Infrared Calibrator, –15 °C to 120 °C4181 Precision Infrared Calibrator, 35 °C to 500 °CIncluded accessoriesModelsAccessories vary by model. For details 1621A“DewK” Thermo-Hygrometer*see www.flukecal.com/DewK1622A“DewK” Thermo-Hygrometer**Each model comes in “-H” version (High-Accuracy Value Kit) and “-S” version (Standard-Accuracy Value Kit).Check price and availability atwww.fluke.com/wtbFor more information, go to www.flukecal.comTemperature Calibration51

Fluke 560 SeriesInfrared ThermometersSpecificationsFluke 566 and 568 IR and ContactThermometersWith a straight-forward user interface and softkeymenus, the Fluke 566 and 568 make evencomplex measurements easy. With just a fewpushes of a button you can easily adjust emissivity,start data logging, or turn on and off alarms.With a rugged, easy-to-use design, the Fluke566 and 568 can stand up to tough industrial,electrical, and mechanical environments.• Measure up to 800 °C (1470 °F)• Easily access advanced features with the softkeybuttons and graphical display• Measure smaller objects from further away• Compatibility with most type K thermocouples• Confidently measure more surfaces, withadjustable emissivity and built-in materialstable• Log and download measurements for reporting(568)• Two levels of backlight• Audible and visual alarms alert you to measurementsoutside of set limits• Min/Max/Avg/Dif functions• Includes KTC bead probe• 1 % measurement accuracy• Versatile interface with six languagesModels Fluke 561 Fluke 566 Fluke 568Infrared temperature range -40 °C to 535 °C(-40 °F to 1022 °F)Accuracy-40 °C to 650 °C(-40 °F to 1200 °F)greater of ± 1 % or ± 1 °C (2 °F)-40 °C to 800 °C(-40 °F to 1470 °F)Distance to Spot (D:S) 12:1 30:1 50:1SightingLaser pointTypical distance to target Up to 2.5 m (7 ft) Up to 4.5 m (15 ft) Up to 7.5 m (25 ft)Probe typeThermocouple KContact temperature range -40 °C to 550 °C(-40 °F to 1022 °F)-270 °C to 1372 °C(-454 °F to 2501 °F)Number of on-board memory locations — 20 99PC download and software — — Yes,with FlukeView ® FormsSoft-key feature menu navigaton — YesMin/Max/Avg/Dif Min/Max/Dif Min/Max/Avg/DifEnglish, French, Chinese, Spanish,Portuguese, German user interface— YesMaterial type adjustment (emissivity) Hi/Med/Lo Material table or 0.1 to 1.00 by 0.01Two levels of backlight — YesHigh and low alarms — High and low alarmsHands-free logging — — YesBattery2 AAIncluded caseHard case (except 561/R and561/P)Hard caseWarrantyTwo-yearOrdering informationIncluded accessoriesModelsUSB cable, FlukeView® Forms software, thermocouple type K bead probe, FLUKE-568 Infrared Thermometercarrying case, two AA batteries, users manual, quickstart guide.Thermocouple type K bead probe, carrying case, two AA batteries, users FLUKE-566 Infrared Thermometermanual and quickstart guide.Thermocouple type K pipe probe, carrying case, two AA batteries, users FLUKE-561 Infrared Thermometermanual.9 V battery, instruction sheet. FLUKE-61 Infrared ThermometerSpecialty modelsFluke 561 Infrared andContact ThermometerThe Fluke 561 combinesthe temperature measurementfunctionsthat professionalsneed for most HVACand industrial jobs,all in one tool.• Pipe probe forsuperheat andsub-cooling andother contactand ambientmeasurements• Min/Max/Dif functions help youquickly identify problems• Scan large areas or small objectsquickly and efficientlyFluke 61 InfraredThermometers• Easy to use one buttonoperation• Easy targeting with brightlaser• Shock-absorbing moldingincreases ruggedness• Two-year conditionalwarranty• Temperature measurementrange up to 275 °C (525 °F)• 8:1 optics• Accurate to within ± 2 % of readingor 2 °C, whichever is greater• Recommended optional carryingcase, C25Recommended accessories80PK-11Pipe Clamp ProbeSee page 6080PK-27Industrial SurfaceTemperature ProbeSee page 6080PK-880PK-18Pipe Clamp Probe Pipe Clamp Probe KitSee page 61 See page 6180PK-22C1600SureGrip Immersion Probe Gear Tool BoxSee page 60 See page 56Check price and availability atwww.fluke.com/wtb52ThermometersFor more information, go to www.fluke.com/thermometers

Fluke 62 Mini Infrared ThermometerNon-contact temperature measurementThe Fluke 62 Mini Non-contact Thermometer is the perfectintroduction to infrared (IR) thermometers for the professional.With the best accuracy in its class, the Fluke 62 mini offersquick and reliable surface temperature readings. This compactand portable tool enables professionals to diagnose heating andventilation problems and monitor the temperature of electricalmotors and electrical panels without contact.• Backlit display for poorly lit areas• Laser sighting• Dual display shows current and max measurementssimultaneouslyModel Fluke 62Infrared temperature range-30 °C to 500 °C (-20 °F to 932 °F)Accuracygreater of ± 1.5 % or ± 1 °C (2 °F)Distance to Spot (D:S) 10:1SightingLaser pointTypical distance to targetUp to 2 m (6 ft)Min/Max/Avg/DifMaxMaterial type adjustment (emissivity) Preset to 0.95Battery9 VIncluded caseSoft caseWarrantyTwo-yearFluke 50 Series II ThermometersLab accuracy in a field thermometerAll models offer:• Laboratory accuracy: ± (0.05 % + 0.3 °C)• Large backlit dual display• Min/Max/Avg• Electronic offset function maximizes overall accuracy• Supports a wide range of thermocouple types• Temperatures displayed in °C, °F, or Kelvin (K)Powerful data logging capabilitiesThe Fluke 53 II B and 54 II B can log up to 500 points of data tointernal memory.• User-adjustable recording intervals• Real-time clock captures the exact event time• Recall function lets logged data be easily reviewed• Download data to optional FlukeView® PC softwareSpecialty modelsFluke 570 Series InfraredThermometersThe Fluke 572 and 574 areideal diagnostic tools formaintenance professionalsrequiring accuratetemperature readings atall distances. Predictivemaintenance professionalsrequiring analysisand documentation usethe 574 model, with100-point data loggingwith the includedsoftware for graphing andanalysis for follow-up reporting anddocumentation.• Backlit display for poorly lit areas• Displays last ten temperaturereadings• Enhanced optics (distance to spotratio up to 60:1)Intrinsically safe model on page 39.Recommended kits62/T+PRO/1AC-II Kit• 62 Non-contactThermometer• T+PRO Electrical Tester• 1AC-II Voltage Detector• Carrying caseT5-600/62/1AC-II Kit• Fluke 62 Mini IRThermometer• Fluke T5-600 VoltageElectrical Tester• 1AC-II VoltageDetector• Carrying caseFeaturesFeatures 54 II B 53 II B 52 51Thermocouple types K,J,T,E,N,R,S K,J,T,E,N,R,S K,J,T,E K,J,T,ENumber of inputs Dual Single Dual SingleTime stamp Time of day Time of day — —62/322/1AC-II Kit• Fluke 62 Mini IRThermometer• Fluke 322 Clamp Meter• 1AC-II Voltage Detector• Test leads• Carrying caseOrdering informationIncluded accessoriesModelsStorage pouch and instruction sheet. FLUKE-62 Mini Infrared ThermometerFLUKE-62/T+PRO/1AC IR Thermometer, Electrical Tester and Voltage Detector KitFLUKE-T5-600/62/1AC IR Thermometer, Electrical Tester and Voltage Detector KitFLUKE-62/322/1AC IR Thermometer, Clamp Meter and Voltage Detector KitFLUKE-411D/62IR Thermometer and Distance Laser Meter KitBead thermocouple(s), batteries, FLUKE-54-2-BDatalogging Thermometer, Dual Inputoverview manual and instructionalguide on CD.FLUKE-53-2-BDatalogging Thermometer, Single InputFLUKE-52-2Digital Thermometer, Dual InputFLUKE-51-2Digital Thermometer, Single InputThermocouple K probe (574), power FLUKE-574-CFPrecision Infrared Thermometer w/Logging SW Close Focussupply (574), RS-232 data cable (574),data graphing, storage and analysisFLUKE-574Precision Infrared Thermometer w/Logging SWsoftware on CD (574), hard case, two FLUKE-572-CFPrecision Infrared Thermometer with Close Focus OptionAA batteries, operator’s guide on CD. FLUKE-572Precision Infrared Thermometer62-411D Kit• Fluke 62 Mini IRThermometer• Fluke 411D LaserDistance Meter• Soft pouch foreach modelCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/thermometersThermometers53

Fluke 810 Vibration TesterTake a vibration expert alongGet answers now!The Fluke 810 Vibration Tester is themost advanced troubleshooting tool formechanical maintenance teams whoneed an answer now. It is a unique newkind of troubleshooting tool, engineeredto detect and evaluate the most commonmechanical problems.The Fluke 810 Vibration Tester uses asimple step-by-step process to report onmachine faults the first time measurementsare taken, without prior machinehistory.Use the Fluke 810 to:• Easily determine the root cause, location and severity of common mechanical faults• Efficiently prioritize and plan equipment repair or replacement• Effectively deploy maintenance resources at the point of greatest impactSimple 3 step processThe Fluke 810 helps you locate and diagnose common mechanical problems andprioritize repair actions in three simple steps:1. Setup: Vibration testinghas never been easierThe Fluke 810 asks forbasic machine informationyou already know,like RPM and horsepower.Its onboard Infofeature gives you fieldtips for setting up andtaking measurementslike a pro.2. Measure: The Fluke810 easily fits intoyour maintenanceroutine. Use it to quicklytroubleshoot problemsor monitor machinecondition.3. Diagnose: Fix it rightthe first time with thepress of a button, theFluke 810 identifies theroot cause, its location,and the problem’sseverity.Breakthrough diagnostictechnologyThe Fluke 810’s diagnostic technologycombines powerful algorithms with adatabase of real-world measurementexperience, making the Fluke 810 themost advanced troubleshooting tool formechanical maintenance teams.Analyze most common equipment:• Motors• Fans and blowers• Belt and chain drives• Gearboxes• Pumps• Compressors• SpindlesDetect the most common causes ofmechanical failure:• Bearing problems• Misalignment• Unbalance• LoosenessSoftware and resourcesViewer PC Software• Store and track your data• Generate diagnostic reportsand track the severity of yourmachine’s condition• Import and store JPEG and FlukeIS2 thermal imagesSpecificationsDiagnostic specificationsAnalysis forStandard faultsMachine rotational speed rangeDiagnosis detailsMotors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, pistonpumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, pistoncompressors, centrifugal compressors, screw compressors, closed coupled machines, spindlesUnbalance, looseness, misalignment and bearing failures200 rpm to 12000 rpmPlain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, citedpeaks, spectraTester specificationsIP rating IP 54A/D converter4 channel, 24 bitDynamic range128 dBFFT resolution800 linesBatteryLithium-ion, rechargeable, 8 hours operating lifeOnboard storage capacity2 GB internal + user accessible slot for additional storageWarrantyThree-years (tester), One-year (sensor and tachometer)Sensor specificationsSensor typeTri-axial accelerometer , 100 mV/g (± 5 %, 25 °C)Tachometer specificationsTachometer type Laser Diode Class 2Interactive, self-paced trainingon DVDLearn more about the basics ofvibration and how to fully utilizethe features and functionality of theFluke 810. Fluke has partnered withMobius Institute, an industry leaderin vibration training, to develop aninteractive training DVD includedwith each Fluke 810.Ordering informationIncluded accessoriesModelsTri-axial accelerometer, magnet mount, mounting pad kit with adhesive, quickdisconnectFLUKE-810 FLUKE-810 Vibration Testeraccelerometer cable, laser tachometer with storage pouch, batterypack with cable and adapters, shoulder strap, adjustable hand strap, Viewer PCsoftware, mini USB to USB cable, carrying case, training DVD, getting startedguide, quick reference guide, users manual on DVD.Additional accessories 810SC-20 Sensor Cable, 20 ftCheck price and availability atwww.fluke.com/wtb54VibrationFor more information, go to www.fluke.com/vibration

ACCESSORIESAS TOUGH ASYOUR METERTPAK Meter Hanger—hang your meter frommagnetic surfaces andfree both hands(see p. 64)iFlex ® Flexible Current ProbeExpands measurementrange to 2500 A acand provides ultimatemeasurement flexibility(see p. 5)TL175 TwistGuard TestLeads—get two categoryratings with one set oftest leads and a wire thatchanges color when theleads need to be replaced(see p. 59)When your job depends on your meter... yourmeter depends on Fluke Genuine Accessories55

Fluke cases and holstersA premium meter deserves a premium caseC35CAMO-C25C550 CXT80 H5 C520ASoft casesCAMO-C25 CamouflageCarrying Case• High quality 1000D fabric• Dimensions (HxWxD): 20.3 x 12.1 x4.6 cm (8 x 4.8 x 1.8 in)CAMO-C37 CamouflageCarrying Case• High quality 1000D fabric• Dimensions (HxWxD): 26.5 x 9 x 3 cm(10.5 x 3.5 x 1.2 in)C12A Meter Case• Made of vinyl• Dimensions (HxWxD): 172 x 128 x 38 mm(6.8 x 5 x 1.5 in)C75 Accessory Case• Made of vinyl• Dimensions (HxWxD): 179 x 103 x 26 mm(7 x 4 x 1 in)C50 Meter Case• Made of vinyl• Dimensions (HxWxD): 192 x 90 x 38 mm(7.56 x 3.5 x 1.5 in)C25 Large Soft Case for DMMs• Made of vinyl• Dimensions (HxWxD): 218 x 128 x 64 mm(8.6 x 5 x 2.52 in)C90 Soft Case for DMMs• Made of vinyl• Dimensions (HxWxD): 205 x 90 x 72 mm(8 x 3.5 x 2.8 in)113/114/115/116/117C35 Soft Carrying Case• Made of durable polyester 600D• Dimensions (HxWxD): 220 x 140 x65 mm (8.7 x 5.5 x 2.6 in)C23 Soft Carrying Case• Made of vinyl• Dimensions (HxWxD): 225 x 95 x 58 mm(8.9 x 3.75 x 2.3 in)C280 Soft Case• Made of durable polyester 600D• Dimensions (HxWxD): 230 x 185 x65 mm (9 x 7.3 x 2.6 in)C115 Soft Carrying Case• Made of durable polyester 600D• Dimensions (HxWxD): 240 x 205 x75 mm (9.5 x 8 x 3 in)C116 Soft Carrying Case• Made of durable polyester 600D• Dimensions (HxWxD): 240 x 230 x65 mm (9.5 x 9 x 2.6 in)C781 Meter Case• Made of durable polyester 600D• Dimensions (HxWxD): 269 x 141 x 90 mm(10.6 x 5.6 x 3.5 in)C33 Soft Carrying Case• Made of vinyl• Dimensions (HxWxD): 280 x 115 x 55 mm(11 x 4.5 x 2.2 in)C789 Meter and Accessory Case• Made of durable polyester 600D• Dimensions (HxWxD): 308 x 256 x77 mm (12 x 10 x 3 in)Cases andHolstersSelectionGuideC12A • •C23 • • • • •Camo-C25 • • • • • • • • • • • •C25 • • • • • • • • • • • •C33 • • • •C35 • • • •Camo-C37 • 365 • • •C43 • • • • • • • • •C50 • •C75The C75 is designed to hold test leads, probes, clips and other required accessoriesC90 • • • •C100 • • • • • 71X 787C101 • • • • • • • • • • • • • • • • • •C115/C116 • • • • • • • 365 • • • •C125 • • 83V •C280 • • • • • • • • • • • • •C345The perfect case for carrying a wide range of Fluke handheld test tools and accessoriesC510 • • • • 787C520A • •C550/C1600The C550 and C1600 are large enough to hold accessories and multiple test toolsC781 • • • • 72X • • 789 •C789 • • • 365 • •C799•C800 • • • • • • 71X 787CXT80 • • • 72X •CXT170 • • • 71X • •CXT280 • •27 II/28 II77-4/175/177/17983V/87V233287/2898845A/8846A/8808A120/190/22X Series51-II/52-II/53-II B/54-II B561/566/56863/66/68321/322355365/373/902374/375/376/381705/707712/714/715/717/72X Series718/719753/754787/789T+/T+PROT5-600/T5-10001503/1507/1577C43 Soft Carrying Case• Made of durable polyester 600D• Dimensions (HxWxD): 318 x 230 x90 mm (12.5 x 9.1 x 3.5 in)C550 Tool Bag• Made of ballistic cloth with heavy-dutyhardware• Dimensions (HxWxD): 333 x 513 x231 mm (13 x 20.2 x 9.1 in)C345 Soft Case• Made of durable polyester 600D• Dimensions (HxWxD): 360 x 200 x240 mm (14 x 8 x 9.5 in)Hard casesCXT Series Extreme Cases• Models CXT80, CXT170, and CXT280 forvarious meter compatibility• Unbreakable, watertight, airtight, chemicalresistant and corrosion proofC800 Meter and Accessory Case• Dimensions (HxWxD): 230 x 385 x115 mm (9 x 15 x 4.5 in)C101 Hard Case• Exterior dimensions (HxWxD): 305 x360 x 105 mm (12 x 14.2 x 4.1 in)• Interior dimensions (HxWxD): 230 x290 x 65 mm (9 x 11.5 x 2.5 in)C100 Universal Carrying Case• Dimensions (HxWxD): 397 x 346 x122 mm (15.7 x 13.6 x 4.8 in)C1600 Gear Box• Includes five hook and loop straps towrap cords and test leads• Dimensions (HxWxD): 260 x 390 x200 mm (10 x 15 x 7.8 in)Leather casesC520A Leather Tester Case• Dimensions (HxWxD): 256 x 154 x106 mm (10 x 6 x 4 in)C510 Leather Meter Case• Dimensions (HxWxD): 287 x 179 x106 mm (11 x 7 x 4 in)HolstersH80M Protective Holster• Includes a hanging magnet, general purposehanger, and hook and loop straps• Dimensions (HxWxD): 190 x 95 x 43 mm(7.5 x 3.7 x 1.7 in)H5 Electrical Tester Holster• Dimensions (HxWxD): 192 x 90 x 38 mm(7.5 x 3.5 x 1.5 in)H3 Clamp Meter Holster• Dimensions (HxWxD): 231 x 90 x 64 mm(9 x 3.5 x 2.5 in)H6 IR Thermometer Holster• Dimensions (HxWxD): 302 x 178 x 57 mm(11.9 x 7 x 2 in)56AccessoriesFor more information, go to www.fluke.com/accessories

Fluke accessory sets and kitsGet an outstanding value with our mostpopular accessoriesTL220 Industrial Test Lead Set• Starter kit for industrial applications• TP220 has round, stainless steel tip• Includes 1 pair: AC220, TP220, TL222• CAT III 1000 V, CAT IV 600 V, 10 ATL223 Electrical Test Lead Set• Starter kit for electrical applications• TP1 has flat blades for wall sockets• Includes 1 pair: AC220, TP1, TL224• CAT III 1000 V, CAT IV 600 V, 10 ATLK-220 SureGrip AccessoryKit with Meter Carrying Case• Plunger style alligator clips• Large jaw alligator clips• Sharp test probes• Right to straight test leads• Zippered vinyl carry case with moveabledivider• Holds large DMMsTLK287 Electronics Master TestLead SetThe perfect test lead kit for today’s electronicstest and design.• Precision electronic probes with multiplespring-loaded sharp tips to maximizecontact with SMD test points• Micro-grabbers and leads to enable fineSMD test• Modular mini-alligator clips, grabbers,leads, probes, and couplers for virtuallyevery electronics needTLK289 Industrial Master TestLead Set and CaseDesigned for electrical and electronics testin today’s industrial environment.• SureGrip alligator clips, grabbers, hookclips and industrial test probesfor dependable contact with a variety oftest points• Magnetic hanger for suspension of yourDMM• Temperature adapter with type Kthermocouple for direct temperaturemeasurement with your DMM’sTLK-225 SureGrip MasterAccessory Kit• Plunger style alligator clips• Plunger style hook clips• Plunger style pincer clips• Large jaw alligator clips• Sharp test probes• Right to straight test leads• Six-pocket storage pouch, keeps theentire set together113/114/115/116/11727 II/28 II/2777 IV175/177/17983V/87V/233287/289434/4358845A/8846A/8808A120 Series190 Series225C321/322355365/373374/375/376/381902705/70771X Series724/725/726753/754787/789T+/T+ProT5-600/T5-10001503/1507/1577/1587Test Lead KitsSelectionGuideTLK287 • • • • • • • • • • • • • • • • • • •TLK289 116 • • • • • • • • • • • •TL220 • • • • • • • • • • • • • • • • • • • •TL223 • • • • • • • • • • • •TL225 • • • • • • • • • • • • • • • • • • •TL238 • • • • • • • • • • • • • • • • • • •TL80A • • • • • • • • • • • • • • • • • • •TL81A • • • • • • • • • • • • • • • • • • •80K-8, 80K-15,80K-40dconly• • • • • • • • • •T5-Kit, Tester Starter KitGetting started kit for electricians whoalready own a Fluke T5 Tester.• Test probes• Large jaw alligator clips• Zippered soft caseFor more information, go to www.fluke.com/accessoriesAccessories57

Fluke test leads, probes and clipsThe best leads for all your measurement needsFor electronic applicationsTL80A Basic Electronic Test Lead Set• Six piece set with zippered case• Probes, alligator clips and tip extendersfor electronic applications• CAT II 300 VTL910 ElectronicTest Probes withReplacement Tips• Small profile providesaccessibility• Comes with five setsof replaceable tips• Replacement tips:TP912• CAT III 1000 V, 3 ATP80 Electronic TestProbes• Tapered tip ideal forprobing electronic componentsor boards• Removable guard for ICprobing• CAT III 1000 V, 10 ATP920 Test ProbeAdapter Kit• IC test tip adapters,extended tips, mediumalligator clips fit overTL71 and TL75 testlead sets• IC test tip Adapter, 3 A• Extended probe tip, 3 A• Med. alligator clip, 5 A• CAT II 300 VTL40 Retractable ProbeAssembly• Retractable, insulatedsharp probe tip• CAT III 300 V, 3 AFor automotive applicationsTP81 and TP82• Stainless steel probepierces insulationon 14, 16 and18 gauge wire• Design provides completeinsulation while working on fuelinjectors or sensors• TP81 for use with modular test leads(Fluke TL224)• TP82 slips over probe tips (Fluke TL71)• Rated to 60 V dcTP88 RigidBackprobe Pin Set• Two inch long pinspass between theweather pack seal and wire• Use with Fluke TL71 or TL75 testlead sets• Rated to 60 V dcTLK281 Automotive Test Lead Kit• Insulation piercing probes• SureGrip silicone test leads• SureGrip test probes• SureGrip plunger style alligator clips• SureGrip alligator clips• Carrying caseTLK282 Deluxe Automotive Test Lead Kit• Insulation piercing probes• Set of five automotive back probe pins• SureGrip silicone test leads• SureGrip test probes• SureGrip plunger style alligator clips• SureGrip alligator clips• SureGrip hook clips• Carrying caseTP40 AutomotiveBack Probe Pin Set• Set of five 1.5 inchpins• Rated to 60 V dc• Provide an easyconnection pastweather pack seals toconnector conductors• Use with Fluke TL71 or TL75 testlead setsTL82 AutomotivePin & SocketAdapter Set• Collection of maleand femaleadapters allowsyou to make firmconnection to pinand socket connectors• Adapters with flexible tips come in thefollowing sizes: 22, 20, 16 and 12• Rated to 60 V dcTL26A Telecom TestLead Set• Five-way multipointtest clips fortelecommunicationsapplications• Flexible silicone insulatedleads are heatand cold resistant• CAT I 30 V, 8 AHigh-voltage probes80K-6, 80K-15, 80K-40 High Voltage Probes• Allows a digital multimeter to measure upto 6,000 volts peak, 15,000 volts peak and40,000 volts peak respectively• 1000:1 division ratio output when connectedto 10 MΩ multimeter• Ground clip included• Intended for low energy applications that arereferenced to ground• 80K-15 (not available in Europe)58AccessoriesFor more information, go to www.fluke.com/accessories

Fluke SureGrip accessoriesAs tough as your meterModular test leads and test probes (use test probes with test leads)TP175, TwistGuard Test Probes• Converts probe tip length between4 mm, a CAT III 1000 V, CAT IV600 V measurement and19 mm, a CAT II 1000 Vmeasurement• Fits standard modulartest leadsFTPL-1 SureGrip Fused TestProbes with Leads• FTP-1 Fused Test Probeswith built-in fuses foradded protection• TL224 Silicone InsulatedTest Leads• CAT III 1000 V, CAT IV600 V, 10 ATL221 SureGripSilicone Test LeadExtension Kit• Superior strain relief• Includes two adaptersto extend leads 1.5 m• CAT III 1000 V,CAT IV 600 V, 10 ATL222 SureGripSilicone InsulatedTest Leads• Superior strain relief• Recommended for usewith AC220, AC280,AC283 test clips• CAT III 1000 V,CAT IV 600 V, 10 AModular clips (use with test leads,includes one red, one black)AC220 SureGrip Alligator Clips• Insulated, nickel plated jaws gripobjects up to .375 inch• Blunt tip grabs round screw heads• CAT III 1000 V, CAT IV 600 V, 10 AAC72 Alligator Clips• Slide-on style for test probes• Jaws open to 8 mm• For use with TL71 andTL75 test lead or any 2mm dia probe tips• CAT III 1000 V, CAT IV 600 V, 10 AAC280 SureGrip Hook Clips• Profile narrows to .22 inch at tip• Hook opening .20 inch at front,.08 inch at base• CAT III 1000 V, CAT IV 600 V, 3 AAC283 SureGrip Pincer Clips• 4.5 inch flexible, insulatedshaft• Nickel plated pincers open to.20 inch• CAT III 1000 V, CAT IV 600 V, 1 ATL224 SureGrip Silicone InsulatedTest Leads• Superior strain relief• 1.5 m siliconeinsulatedwire resistsheat and cold• CAT III 1000 V, CATIV 600 V, 10 AFTP-1 SureGripFused Test Probes• Built-in fuses foradded protection• 2 mm threaded probetips include removable4 mm lantern-stylespring contacts• Removable GS38 insulated caps• CAT III 1000 V, CAT IV 600 V, 10 ATP1, TP2, TP4 and TP38Slim Reach Test Probes• Slender probe bodies forprobing closely spaced orrecessed points• TP1 has a flat blade• TP2 has 2 mmdiameter tip• TP4 has 4 mmdiameter tip• TP38 has stainless steelinsulated probe to helplessen the risk of arcflash explosion• CAT III 1000 V, CAT IV 600 V, 10 ATP220 SureGrip IndustrialTest Probes• Sharp, .5 inch stainlesssteel tip providesreliable contact• Flexible finger barrierimproves grip• CAT III 1000 V, CAT IV 600 V, 10 AAC285 SureGrip Alligator Clips• Multi-purpose tooth patterngrips anything from fine gaugewire to a .75 inch nut• Nickel-plated steel jaws• Accepts standard modular 4 mm test leads• CAT III 1000 V, CAT IV 600 V, 10 AAC175 Threaded Alligator Clips• Threads securely ontoTL175 or TP175 probes• Insulated alligator clipswith flexible boots• Jaw opening: 7 mm(0.275 in), jaw contactmaterial: nickel-plated steel• CAT III 1000 V, CAT IV 600 VAC173 Extended Tooth Alligator Clips• Extended tooth jaw withfront placement forattaching to screw heads• Accepts standard 4 mmmodular test leads• Jaw opening: 8 mm (0.31 in), jaw contactmaterial: nickel-plated steel• CAT III 1000 V, CAT IV 600 VFor more information, go to www.fluke.com/accessoriesThe new standardfor safetyTL175 TwistGuard Test Leads• Probes meet new IEC 61010-031requirementsfor safety• Patentedextendabletip guard meetsnew CAT III 1000 V, CAT IV 600 Vrequirements while providing theflexibility you need for CAT IImeasurements• New Wear-Guard testlead wearindicator thatchanges colorwhen leadsare damagedand in need ofreplacementShrouddropsSimply twistprobe handle• Probes always show correct categoryrating for tip being used• Advanced strain relief exceeds5,000 bend life• TP175 probes fit modular test leadsTL238 SureGrip Test Lead Set forhigh energy environments• Insulated tipprobes helplessen riskof arc flashexplosion• Probe extenderskeephands awayfrom livecurrent• Includes one pair each, insulatedtest tip probes, probe extenders andTL224 Test Leads• Probes and leads CAT III 1000 V,CAT IV 600 V, 10 A, extendersCAT III 1000 V 10 ATL71 Premium DMM Test Lead Set• Flexible siliconeinsulated leadsare heat and coldresistant• Distinctive comfortgrip probes• Recommended forµV measurements• CAT III 1000 V, CAT IV 600 V, 10 ATL75 Hard Point Test Lead Set• Extremely hard alloy tips resist wear• Distinctive comfortgrip probes• 1.5 m PVC leads• CAT III 1000 V,CAT IV 600 V, 10 AAccessories59

Fluke temperature accessoriesHot probes with cool designsSureGrip temperature accessoriesThe innovative SureGrip design from Flukeis now available in select temperature probes.The soft rubber handle combined with a newergonomic shape is so comfortable to holdthat you’ll forget about the probe and focus onthe measurement. All SureGrip probes havean improved, more flexible strain relief for along life.Cleans up withsoap and waterSoft rubberhandle providesa secure gripBead Bead HVAC Immersion Surface Air PiercingGeneralpurposeIndustrialsurfaceLowest temperatureHighest temperatureProbe material80BK-A-40 °C(-40 °F)260 °C(500 °F)Type K wire withteflon insulation80PK-180PJ-180PK-11 80PK-22 80PK-3A 80PK-24-30 °C(-22 °F)105 °C(221 °F)Probe length 1 m lead wire 19 in Velcro cuff-40 °C(-40 °F)1090 °C(1994 °F)Velcro Inconel 60021.27 cm(8.375 in)The 80TK enables your meter to read temperature using mV.For the Fluke Thermometer, 51, 52, 53, and 54 III, no adapter is necessary for thermocouple types K, J, T and E.0 °C(32 °F)260 °C(500 °F)Type K sensorwith teflon body9.525 cm(3.75 in)-40 °C(-40 °F)816 °C(1500 °F)Inconel21.59 cm(8.5 in)80PK-2580PT-25K Type: -40 °C(-40 °F) T Type:-196 °C (-321 °F)350 °C(662 °F)316 StainlessSteel10.16 cm(4 in)Cable length 1 m (3.3 ft) 1.3 m (4 ft) 1 m (3.3 ft)ConnectionStandardbanana jackMolded thermocouple plug80PK-26-40 °C(-40 °F)816 °C(1500 °F)304 Stainless SteelSureGrip handle No No No Yes No Yes Yes Yes YesKey featureIdeal for initial troubleshooting. Canbe secured in place with a magnet.Velcro probeallows handsfree temperaturemeasurement.For use inliquids or in gels.Exposed junctionfor direct contactwith flat orslightly convexsurfaces.Perforated bafflefor air andnon-caustic gasmeasurements.Probe materialsafe for use infoods. Sharp tippierces solidsurfaces.21.57 cm(8.5 in)Use for generalpurpose airor surfacemeasurements.Thermocouple types K K, J K K K, T K80PK-27-127 °C(-196 °F)600 °C(1112 °F)20.32 cm(8 in)Low conductivitystainless steelminimizes thermalshunting.Extra rugged.Typical useGeneral purpose • • • • • • • • •HVAC — • • • • • — • •Food service — — — • — — • — —Industrial • • • — — — — — •Residential • • — — • • • — —Commercial • • • • • • • • •TemperatureAccessoriesSelectionGuide110/111/112114/115/11711627 II28 II175/17717923380 Series III/83V87V187/189287/28980BK-A — — • — — — • • — • • • — — — — — — — — — — — — • • —All 80PK Probes ✱ ✱ ▲ ✱ ▲ ✱ ▲ ▲ ✱ ▲ ▲ ▲ ✱ ✱ ✱ ✱ • • • • ✱ • • ✱ • ▲ ▲80PJ-1/80PJ-9 — — — — — — — — — — — — — — — — • — — • — • • — — — —80PT-25 — — — — — — — — — — — — — — — — • — — • — • • — — — —80TK • • — • — • — — • — — — • • • • — — — — • — — • — — —80T-150UA • • — • — • — — — — — — • • • • — — — — • — — • — — —80PJ-EXT — — — — — — — — — — — — — — — — • — — • — • • — — — —80PK-EXT ✱ ✱ ▲ ✱ ▲ ✱ ▲ ▲ ✱ ▲ ▲ ▲ ✱ ✱ ✱ ✱ • — — • ✱ • • ✱ • ▲ —80PT-EXT — — — — — — — — — — — — — — — — • — — • — • • — — — —80CK-M ✱ ✱ ▲ ✱ ▲ ✱ ▲ ▲ ✱ ▲ ▲ ▲ ✱ ✱ ✱ ✱ • — — • ✱ • • ✱ — ▲ —80CJM — — — — — — — — — — — — — — — — • — — • — • • — — — —✱ Requires 80TK ▲ Requires 80AK-A — N/A45/8845/884643B120 Series190 Series51-II/52-II/53-II B/54-II B561574/576714715725/726741/743/744/754787/7899021587157760AccessoriesFor more information, go to www.fluke.com/accessories

Fluke Temperature accessoriesTurn your digital multimeter into a thermometerOther temperature accessories80TK Thermocouple Module• Converts type Kthermocouplesignals into mVoutput• Connects to DMMvia standardbanana plugs• Switch selectable°C or °F• Range: -50 °C to 1000 °C(-58 °F to 1832 °F)• Includes 80PK-1 probe80T-150UA Universal Solid StateTemperature Probe• For measurementof air, surface andnon-corrosivematerials• Measurementrange:-50 °C to 150 °C(-58 °F to 302 °F)• Output: 1 mV/°C or 1 mV/°F (switchselectable)• Connects to DMM via standard bananaplugs80PK-8, 80PK-10, Pipe ClampTemperature Probes• Type K thermocouplesclampsecurely onto pipesfor fast temperatureand superheatmeasurements• Durable ribbonsensors• 1 m (39 in) lead• Measure from -29 °C to 149 °C• 80PK-8 for 6.4 mm to 34.9 mm (0.25 into 1.375 in)• 80PK-10 for 32 mm to 64 mm (1.25 in to2.5 in)Thermocouple Plug Kits700TC1A kit of ten mini-plugconnectors. One each ofthe following:Type J (black)Type K (yellow)Type T (blue)Type E (purple)Type R/S (green)Type B or Cu (white)Type L (J-DIN) (blue)Type U (T-DIN) (brown)Type C (red)Type N (orange)700TC2A kit of seven mini-plugconnectors.Type J (black), twoType K (yellow), twoType E (purple), oneType T (blue), oneType R/S (green), one80PK-18,Pipe ClampTemperatureProbe Kit• Includes both80PK-8 and80PK-10Type K clamps• Provides full range of pipe measurementsizes• Includes soft carrying case to convenientlykeep both clamps handy for anysituation80CK-M and 80CJ-MType K and J MaleMini-Connectors• Isothermal screw terminalfor K or J wire• Suitable for up to 20gauge thermocouplewire• Color coded to industrystandards (K-yellow,J-black)• Two per packageProcess tools accessoriesBP7240• Li-ion rechargeablebattery; nominal7.2 volt, 4400 mA hr• Use with 750 SeriesCalibratorsBP7235• NiMH rechargeablebattery; nominal7.2 volt, 3500 mA hr• Use in 700 and 740Series Calibrators700LTP-1 Low PressureTest PumpHand operated pressurepump designed to generateeither vacuum to -13 psi/-.90 bar or pressures to100 psi/6.9 bar. Ideal forlow pressure applicationsrequiring accurate low pressuretesting.700ILF In-line FilterThe Fluke 700ILF canbe used to isolate thecalibrator from incidentalcontact with fluids.Particularly useful withthe 718 calibrator to help keep moistureor oils from contaminating theon-board pump.700PTP-1 PneumaticTest PumpThe Fluke 700PTP is a handheldpressure pump designedto generate either vacuum to-11.6 psi/-0.8 bar or pressureto 600 psi/40 bar.80PJ-EXT, 80PK-EXT, 80PT-EXTThermocoupleWire ExtensionKitsFor extending andrepairing type J, Kor T thermocouplewires.• Kit includes3 m (9 ft) ofthermocouplewire and 1 pairof male/femalemini-connectors• Maximum continuousexposuretemperature:260 °C (500 °F)• 80PK-EXT iscompatible with type K thermometers;80PJ-EXT is designed for typeJ thermometers, and 80PT-EXT isdesigned for type T thermometers700HTP-2 HydraulicTest PumpThe Fluke 700HTP isdesigned to generate pressuresup to 10,000 psi/700bar. Use the Fluke 700PRVadjustable relief valves tolimit pressures from 1360 psito 5450 psi.700HTH-1 HydraulicTest HoseThe 700HTH isa 10,000psi, 700 bartest hose thatconnects to acalibration unit under testfrom a Fluke 700HTPhydraulic test pump.700PMP PressurePumpThe 700PMP is a handoperatedpressure pumpto provide pressures upto 150 psi/1000 kPa.Output fitting is 1/8FNPT.Fluke 700-IVCurrent ShuntConversion factor:10 mV = 1 mAAccuracy (% ofinput, one-year): 0.025 %Input current: 0 mA to 55 mAInput resistance: 250 Ω nominalOutput resistance: 10 Ω nominalAccuracy specification appliesfrom +18 °C and 28 °C to 50 °CMaximum input voltage: 30 V dcFor more information, go to www.fluke.com/accessoriesAccessories61

Fluke current clampsFor use with multimeters, portableoscilloscopes and power quality analyzersAC only modelsi200i400i800i3000si200si400si1000si3000s Flex/i6000sAC current clamp specificationsi200 i200s i400 i400s i800 i1000s i3000s i2000 Flex i3000s Flex i6000sAC current range 1 A to 200 A 1 A to 200 A 1 A to 400 A 0.5 A to 400 A 1 A to 800 A 0.2 A to 1000 A 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A 60 A to 6000 AAccuracy < 3 % + 0.5 A 48to 65 Hz< 1 % + 0.5 A48 Hz to 65 Hz2 % + 0.06 A45 Hz to 400 Hz± 1 % of range45 to 65 Hz.5 A to 40 A,2 % + .015 A, 5A to 400 A,2 % + .04 A,45 to 400 Hz0.1 A to 10 A± 3 % + .01 A,10 A to 200 A± 2 %,200 A to 800 A± 1 %0.2 to 10 A:3 % + 0.1 A10 A to 100 A:2 % + 0.5 A100 A to 1000 A:1 % + 1 A48 to 65 Hz1 to 30 A:2 % + 0.1 A1 to 300 A:2 % + 0.5 A1 to 3000 A:2 % + 2 A48 to 65 Hz± 1 % of range45 to 65 HzRanges:20 A, 200 A,2000 A± 1 % of range,45 Hz to 65 HzRanges:30 A, 300 A,3000 ABandwidth (-3 dB) 40 Hz to 40 kHz 40 Hz to 40 kHz 5 kHz to 20 kHz 5 Hz to 10 kHz 30 Hz to 10 kHz(typical)5 Hz to 100 kHz 10 Hz to 100 kHz 10 Hz to 20 kHz 10 Hz to 50 kHz 10 Hz to 50 kHz,(- 3 dB)Maximum conductordiameter20 mm (0.8 in) 20 mm (0.8 in) 32 mm (1.25 in) 32 mm (1.25 in) 54 mm (2.13 in) 54 mm (2.13 in) 64 x 100 mm(2.52 x 3.94 in)177 mm (7 in) 177 mm (7 in) or265 mm (10.4 in)193 mm (7.6 in) or289 mm (11.4 in)Maximum300 MCM 300 MCM 750 MCM 750 MCM 2-500 MCM or 2-500 MCM or 64 mm610 mm 610 mm or 915 mm 610 mm (24 in) orconductor size1-1000 MCM 1-1000 MCM (2.52 in)(24 in)circumferencecircumference 915mm (36 in)Output levels 1 mA/A 10 mV/A100 mV/AOutput cable1.5 m shroudedbanana plugs2 m to BNCtermination1 mA/A 10 mV/A1 mV/A1.5 m shroudedbanana plugs2.5 m to BNCtermination1 mA/A 1 mV/A10 mV/A100 mV/A1.6 m shroudedbanana plugs1.6 m to BNCtermination10 mV/A1 mV/A0.1 mV/A2.1 m to BNCterminationi3000s Flex-24 (24 in dia), i3000s Flex-36(36 in dia), i6000s Flex-24 (24 in dia) i6000sFlex-36 (36 in dia)100 mV/A10 mV/A1 mV/A2 m with doubleshrouded bananaplugs100 mV/A10 mV/A1 mV/A2.1 m to BNCtermination50 mV/A5 mV/A0.5 mV/A2 m to BNC,4 mm plugadapter suppliedWarranty One-year One-year One-year One-year One-year One-year One-year One-year One-year One-yearSafety rating CAT III 600 V CAT III 600 V CAT III 1000 V CAT III 1000 V CAT III 600 V CAT III 600 V CAT III 600 V CAT III 600 V CAT III 600 V CAT III 600 VCAT IV 600 V CAT IV 600 VAC current clamp selection guideMeter i200 i200s i400 i400s i800 i1000s i3000s i2000 Flex 1 i3000s Flex i6000s114/116 1 A to 200 A 0.6 A to 400 A* 0.6 A to 1000 A* 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF115/117 60 A to 200 A 1 A to 200 A 60 A to 400 A 0.6 A to400 A*60 A to 800 A 0.6 A to 1000 A* 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF233 60 A to 200 A 1 A to 200 A 60 A to 400 A 0.6 A to400 A*60 A to 800 A 0.6 A to 1000 A* 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF27II 2 A to 200 A 1 A to 200 A 2 A to 400 A 1 A to 400 A* 2 A to 800 A 0.1 A to 1000 A* 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF28II 1.8 A to 200 A 1 A to 200 A 1.8 A to 400 A 1.8 A to 400 A 1.8 A to 800 A 0.2 A to 1000 A* 2 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF77 IV 1 A to 200 A 1 A to 400 A* 0.1 A to 1000 A* 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF175/177/179 3 A to 200 A 1 A to 200 A 3 A to 400 A 1 A to 400 A* 3 A to 800 A 0.3 A to 1000 A* 3 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF1577/1587Insulation Meter3 A to 200 A 1 A to 200 A 3 A to 400 A 3 A to 400 A* 3 A to 400 A 0.3 A to 1000 A* 3 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF83V/88V 2 A to 200 A 1 A to 200 A 2 A to 400 A 1 A to 400 A* 2 A to 800 A 0.1 A to 1000 A* 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF87V 2 A to 200 A 1 A to 200 A 2 A to 400 A 2 A to 400 A* 2 A to 800 A 0.2 A to 1000 A* 2 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF287/289 1 A to 200 A 1 A to 200 A 1 A to 400 A 0.5 A to 400 A* 1 A to 800 A 0.2 A to 1000 A* 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF43B Power QualityAnalyzer1 A to 200 A 0.35 A to 400 A 0.1 A to 1000 A 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF434/435 PowerQuality Analyzer1 A to 200 A 1.2 A to 400 A 0.3 A to 1000 A 1.2 A to 3000 A Best to usei430FlexBest to usei430Flex-TF120 SeriesScopeMeters1 A to 200 A 2.5 A to 400 A 0.25 A to 1000 A 2.5 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF190 SeriesScopemeters1 A to 200 A 1 A to 400 A 0.1 A to 1000 A 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF8808A 1 A to 200 A 1 A to 200 A 1 A to 400 A 0.5 A to 400 A* 1 A to 800 A 0.1 A to 1000 A* 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF8845A/8846A 1 A to 200 A 1 A to 200 A 1 A to 400 A 1 A to 400 A* 1 A to 800 A 0.2 A to 1000 A* 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF787/789 ProcessMeters50 A to 200 A 1 A to 200 A 50 A to 400 A 2 A to 400 A* 50 A to 440 A 0.2 A to 1000 A* 2 A to 3000 A 2 A to 2000 A 3 A to 3000 A Best to usei430Flex-TF* Requires PM9081/001 Adapters.1Three range version.2Current and watt readings will be multiples of 10 higher or lower than actual on some ranges.62AccessoriesFor more information, go to www.fluke.com/accessories

Fluke current clampsFor use with multimeters, portableoscilloscopes and power quality analyzersAC/DC models80i-110si1010i30si310s, i30s and i30Hall Effect AC/DCCurrent ClampsEspecially useful for lowcurrent measurementsdown to 30 milliamps.i410i310si30AC/DC current clamp specifications80i-110s i410 i1010 i30 i30s i310sDC range 0.1 A to 100 A 1 A to 400 A 1 A to 1000 A 30 mA to 30 A 30 mA to 30 A 0.1 A to 450 AAC range 0.1 A to 70 A 1 A to 400 A 1 A to 600 A 30 mA to 20 A rms 30 mA to 20 A rms 0.1 A to 300 AAccuracy0.1 A to 10 A; dc to1 kHz: ± 3 % + 50 mA;up to 100 A add 15 %; up to 203.5 % + 0.5 A for dc or ac (45to 400 Hz)2 % + 0.5 A for dc or ac (45to 400 Hz)± 1 % of reading, ± 2 mA ± 1 % of reading,± 2 mA30 A range: 1 % +50 mA300 A range: 1 % + 300 mAkHz add 12 %Bandwidth (-3 dB) 100 kHZ 3 kHz 10 kHz dc to 20 kHz (-0.5 dB) dc to 100 kHz (-0.5 dB) DC to 20 kHzZero error adjustment Yes Yes Yes Yes Yes YesMaximum conductor11.8 mm (0.46 in) 30 mm (1.18 in) 30 mm (1.18 in) 19 mm (0.75 in) 19 mm (0.75 in) 19 mm (0.75 in)diameterMaximum conductor size 1 AWG 750 MCM or 2-500 MCM 750 MCM or 2-500 MCM 250 MCM 250 MCM 250 MCMOutput levels 10 mV/A, 100 mV/A 1 mV/A 1 mV/A 100 mV/A 100 mV/A 1 mV/A, 10 mV/AOutput cable1.6 meter with BNC2 meter with BNCterminationtermination1.2 meter withshrouded bananaplugs1.2 meter withshrouded bananaplugs1.5 meter withshrouded dualbanana plue2 meters with BNC terminationand a BNC to safety shroudedbanana adapterBattery life 40 hours 60 hours 60 hours 30 hours 30 hours 30 hoursWarranty One-year One-year One-year One-year One-year One-yearSafety CAT II 600 V;CAT III 300 VCAT III 600 V CAT III 600 V CAT III 300 V CAT III 300 V CAT III 300 VAC/DC current clamp selection guideMeter 80i-110s i410 i1010 i30 i30s i310s114/115/116/117 0.1 A to 100 A dc/0.1 A to 70 A ac*233 0.1 A to 100 A dc/0.1 A to 70 A ac*27II0.1 A to 100 A dc/0.1 A to 70 A ac*28II0.1 A to 100 A dc/0.2 A to 70 A ac*77-IV0.1 A to 100 A dc/0.1 A to 70 A ac*175/177/179 0.11 A to 100 A dc/ 0.3 A to70 A ac*1577/1587 Insulation Meter 0.1 A to 100 A dc/0.3 A to 70 A ac*83V/88V0.1 A to 100 A dc/0.1 A to 70 A ac*87V0.1 A to 100 A dc/0.2 A to 70 A ac*287/289 0.1 A to 100 A dc/0.1 A to 70 A ac*123/124 ScopeMeters 0.1 A to 100 A dc/ 0.25 Ato 70 A ac190 Series Scopemeters 0.1 A to 100 A dc/0.1 A to 70 A ac8808A0.1 A to 100 A dc/0.1 A to 70 A ac*8845A/8846A0.1 A to 100 A dc/0.1 A to 70 A ac*1.4 A to 400 A dc/6 A to 400 A ac1.4 A to 400 A dc/6 A to 400 A ac1 A to 400 A dc/1 A to 400 A ac1 A to 400 A dc/6 A to 400 A ac1 A to 400 A dc/5 A to 400 A ac1.6 A to 400 A dc/30 A to 400 A ac1.2 A to 400 A dc/30 A to 400 A ac1 A to 400 A dc/1 A to 400 A ac1 A to 400 A dc/20 A to 400 A ac1 A to 400 A dc/1 A to 400 A ac1 A to 400 A dc/25 A to 400 A ac**1 A to 400 A dc/5 A to 400 A ac**1 A to 400 A dc/2 A to 400 A ac1 A to 400 A dc/1 A to 400 A ac1.4 A to 1000 A dc/6 A to 600 A ac1.4 A to 1000 A dc/6 A to 600 A ac1 A to 1000 A dc/ 1 A to600 A ac1 A to 1000 A dc/ 6 A to600 A ac1 A to 1000 A dc/ 5 A to600 A ac1.6 A to 1000 A dc/ 30 A to600 A ac1.2 A to 1000 A dc/ 30 A to600 A ac1 A to 1000 A dc/ 1 A to600 A ac1 A to 1000 A dc/ 20 A to600 A ac1 A to 1000 A dc/1 A to 600 A ac1 A to 1000 A dc/25 A to 600 A ac**1 A to 1000 A dc/5 A to 600 A ac**1 A to 1000 A dc/2 A to 600 A ac1 A to 1000 A dc/1 A to 600 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/40 mA to 20 A ac30 mA to 30 A dc/ 300 mAto 20 A ac30 mA to 30 A dc/ 300 mAto 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/ 200 mAto 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/ 250 mA to20 A ac**30 mA to 30 A dc/50 mA to 20 A ac**30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/40 mA to 20 A ac30 mA to 30 A dc/ 300 mAto 20 A ac30 mA to 30 A dc/ 300 mAto 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/ 200 mAto 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/ 250 mAto 20 A ac30 mA to 30 A dc/50 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac0.1 A to 450 A dc/0.6 A to 300 A ac0.1 A to 450 A dc/0.6 A to 300 A ac0.1 A to 450 A dc/0.1 A to 300 A ac0.1 A to 450 A dc/2 A to 300 A ac0.1 A to 450 A dc/0.4 A to 300 A ac0.1 A to 450 A dc/3 A to 300 A ac0.1 A to 450 A dc/3 A to 300 A ac0.1 A to 450 A dc/0.1 A to 300 A ac0.1 A to 450 A dc/2 A to 300 A ac0.1 A to 450 A dc/0.1 A to 300 A ac0.1 A to 450 A dc/ 2.5 A to300 A ac0.1 A to 450 A dc/0.5 A to 300 A ac0.1 A to 450 A dc/0.2 A to 300 A ac0.1 A to 450 A dc/0.1 A to 300 A ac705/707 0.1 A to 100 A dc, No ac* 4 A to 400 A dc, No ac 4 A to 1000 A dc, No ac 40 mA to 30 A dc, No ac 40 mA to 30 A dc, No ac 0.4 A to 450 A dc, No ac715 0.1 A to 100 A dc, No ac* 4 A to 400 A dc, No ac 4 A to 1000 A dc, No ac 40 mA to 30 A dc, No ac 40 mA to 30 A dc, No ac 0.1 A to 450 A dc, No ac787/789 Process Meters 0.1 A to 100 A dc/0.2 A to 70 A ac** Requires PM9081 Adapter** Requires PM9082/001 Adapter***Only for use with the 430 Series Power Quality Analyzers1 A to 400 A dc/20 A to 400 A ac1 A to 1000 A dc/20 A to 600 A ac30 mA to 30 A dc/ 200 mAto 20 A ac3 mA to 30 A dc/200 mA to 20 A ac0.1 A to 450 A dc/2 A to 300 A acFor more information, go to www.fluke.com/accessoriesAccessories63

Fluke lights and hangersFree your hands and shed light on the contact pointLVD1 Volt Light• Exclusive dual-sensitivity• Detects voltages from 40 V ac to300 V ac• Voltage detector glows blue at 50 Hz to60 Hz or 2.5 cm to 38 cm (1 in to 5 in)away from source• Ultra-bright white LED with 100,000hour bulb life• AAA battery includedLVD2 Volt Light• Non-contact ac voltage detector andbright white LED flashlight• Detects voltage from 90 V to 600 V acfrom one to five inches away• CAT IV rated, one-year warrantyTPAK ToolPakMagnetic MeterHanger• Free both hands tomake measurements• Hang your meterfrom metallic surfaceslike panels andpipes• Kit includes universalhanger clips (two),hook and loopstraps (two lengths),adapter and strongmagnet• Attaches to back ofmany Fluke meters,including 110, 170,180, 280 Series,87V and 83V DMMs,724, 725 and 789Process Calibrators,70 Series III DMMs,1503, 1507, 1577and 1587 InsulationMultimeters and50 Series II DigitalThermometersLeadWrap Test LeadFasteners• Keep your favoriteleads together• Hook and loopfasteners• Three per packageL205 Mini Hat LightRugged, high-intensity Xenon worklight.• Attaches to a baseball cap• Includes a hat clip• Includes two AAA batteries• WaterproofL206 Deluxe LED Hat Light(hard hat not included)Attach it to a hard hat, a baseball cap,or even a panel door.• Three super bright white LEDs—neverburn out• Special hard-hat attachment included• 40-hour battery life• Includes three AAA batteriesL215 SureGrip Kit with Probe Light andProbe Extenders• L200 probe light• TP220 SureGrip test probes• TL224 SureGrip test leads• TP280 test probe extenders• Soft foldable pouch, keeps the entireset togetherL210 Probe Light and Probe Extenders• 8 inch probe extenders fit modular testprobes• Probe and extender length complies withNFPA recommendations• Bright white LED illuminates contactarea• Probe light fits on extender or test probe64AccessoriesFor more information, go to www.fluke.com/accessories

Specialty accessories and softwareGet more out of your multimeterStray voltageSV225• Eliminates stray voltagedue to capacitancebetween wires inelectrical installations• Compatible with allinstruments and test leadsthat accept standard 4 mm shroudedbanana connectorsPressure and vacuumPV350 Pressure Vacuum Module• Digital pressureand vacuummeasurements ina single module• MeasuresHVAC/R,hydraulic andpneumatic pressuresto 350 psig/2413 kPa (usableto 500 psig)• Measures to 76 cm Hg (29.9 in Hg)vacuum (not intended for measuringmicrons of vacuum)• Compatible with most digital multimetersFuse selection guideReplacement fuses for Fluke DMMs are available from your distributor. To orderdirect from Fluke call 1-800-44-FLUKE (U.S.) or email fluke-info@fluke.com.ModelFuse Requirements21-III/75-III/73-IIIP/N 871173 630mA 250V fuseP/N 803293 11A 1000V fuse27 (S/N7247001 P/N 943121 440mA 1000V fuseP/N 803293 11A 1000V fuse83/85/87 (S/N>6565000) P/N 943121 440mA 1000V fuseP/N 803293 11A 1000V fuse83-III/85-III/87-III 87-IV/89-IV/187/189/287/289/77-III/79-III/23-III/26-III/175/177/179/77-IV/27-II/28-IIP/N 943121 440mA 1000V fuseP/N 803293 11A 1000V fuse111/112/115/117/233 P/N 803293 11A 1000V fuse1577/1587 P/N 943121 440mA 1000V fuse1503/1507 P/N 2279339 315mA 1000V fuse787/789 P/N 943121 440mA 1000V fuse (Qty 2)110/111/112114/115/116/11727 II/28 II/27175/177SelectionGuideTPak • • • • 83V • • • • • • 789 • •PV350 • • • • • • • • • • • • • • • • • • • •(pressure)FOM (fiber • • • • • • • • • • • • • • • • • •optic)CO-210 • • • • • • • • • • • • • • • • • •*53 B II, 54 B II only.17980 Series III/83V87/89 IV87V233287/289/187/189Fiber opticsFOM Fiber OpticMeterThe Fluke Fiber OpticMeter (FOM) helpsyou test and maintainfiber optic cablewithout having to buya whole new meter. Plug the FOM directlyinto any DMM with a mV dc funtion and a10 mΩ input impedance, and quickly andaccurately verify fiber optic cable systemloss. Light sources and patch cords soldseparately.FOS 850and FOS850/1300Fiber OpticLight SourcesA varietyof LED lightsources allowyou to test differentcables.43B120 Series190 Series51/52/53/54 II705/707715725/726741/743744787/78915871577Logging softwareFlukeView® FormsHarness the power of the data loggingfunction on your Fluke Digital Multimeter,Thermometer or ProcessMeter. Log livereadings while connected to a PC, orleave your Fluke 289, 789 or 54-II inplace to capture up to 1,000 readings fordownload to a PC.Choose the model that’s right for you:• FVF-SC2: Includes software andcable used with 280 Series DMMs and789 ProcessMeters, and the 1550BInsulation Tester• FVF-SC3: Includes software and cableused with 45 Bench Meters• FVF-SC4: Includes software andcable used with 8845A and 8846AMultimetersGo to www.fluke.com/flukeviewformsto download the demo.FlukeView® Forms BasicAn abridged version of FlukeView Forms.• Available for use with 280 SeriesDMMs and 789 ProcessMeters, only• Upgrade to the full FlukeView Formswith FVF-UG• Compatible with the 280 and 789series onlyChoose the model that’s right for you:• FVF-Basic: FlukeView Forms Basictransfers data from Fluke test tool toa PC. Displays readings in table orgraphical format.• FVF-SC2, -SC4: FlukeView Forms Fullprovides Basic software functionsplus customizable documents andtemplates.• FVF-UG: FlukeView Forms Upgrade,compatible with all forms of FlukeViewForms (Basic and Full)Model Instrument Compatibility CableFVF-BASIC Fluke 280 Series, 789, 1550B, 1653, 180 Series USB / IRFVF-SC2 Fluke 280 Series, 789, 1550B, 1653, 180 Series USB / IRFVF-SC4 Fluke 8808A, 8845A, 8846A, 45* USB / SerialIR189USB USB cable for Fluke-18X, 28X DMMs USB / IRFor more information, go to www.fluke.com/accessoriesAccessories65

275 inH2O253 inH2OPGM EXITK1 K2K3 K464%ENTER275 inH2O253 inH2OPGM EXITK1 K2K3 K464%ENTERRUNFWDREVPROGRAM FAULTVOLTSAMPSHERTZPORTMODNET ANET BF O O FFFO FO O FO FOONONON ON ONONONF O O FON ONO FONMAINONO FONF OONON ON ON ON ONONF O F O F O F O F O F O FO450 ° FENTERENTER275 inH2O253 inH2OPGM EXITK1 K2K3 K464%ENTER275 inH2O253 inH2OPGM EXITK1 K2K3 K464%ENTERFluke tools forindustrial techniciansControlvalveTransmitterPressureguageAutomation network health275 inH2OPGM EXIT253 inH2OK1 K2K3 K464%Monitor/controlinterface275 inH2OPGM EXIT253 inH2OK1 K2K3 K464%Industrial networkPLCPLCPLC4-20 mAinput4-20 mAoutput4-20 mAoutput4-20 mAoutputApplicationsTanksThermal imager and pressure calibrator.Process ControlsThermal imager and mA clamp meter.PLCs/NetworkScopeMeter test tool and mA clamp meter.Motors/PumpsDigital multimeter, insulation tester,thermal imager, clamp meter, infraredthermometer and power quality analyzer.Drives/MCC/Large LoadsDigital multimeter, ScopeMeter test tool, powerquality analyzer and thermal imager.Electrical CabinetsDigital multimeter, clamp meter, infraredthermometer, thermal imager and powerquality analyzer.ConveyorsThermal imager and distance meter.Switchgear/TransformersPower quality analyzer and thermal imager.66 For more information, go to the Solution Centers at www.fluke.com

Fluke tools for facilitiesmaintenanceApplicationsRooftop UnitsDigital multimeter, power quality analyzer,AirMeter TM , thermal imager, infraredthermometer and distance meter.Building EnvelopeThermal imager, infrared thermometerand distance meter.Building ControlsMilliamp clamp, ScopeMeter test tooland digital multimeter.Electrical CabinetsDigital multimeter, thermal imager,infrared thermometer, clamp meterand power quality analyzer.Drives/Motor ControlsDigital multimeter, power qualityanalyzer, ScopeMeter test tool,thermal imager and infraredthermometer.Motors/Pumps/FansDigital multimeter, power qualityanalyzer, clamp meter, thermalimager, insulation multimeter andinfrared thermometer.Furnace/Boilers/ChillersPower quality analyzer, AirMeterand thermal imager.Ventilation/Air SupplyAir Meter, electrical tester,digital multimeter and infraredthermometer.Switchgear/TransformersPower quality analyzer andthermal imager.UPS/GeneratorsPower quality analyzer, thermalimager and ScopeMeter test tool.For more information, go to the Solution Centers at www.fluke.com67

Your authorized Fluke distributorJoin the conversationWe design our products with you in mind. Yeah,we have guys in lab coats, developing andtesting our tools in rooms we dare not enter.But our ideas, the things that drive our intensedevelopment process, come straight from thejob site—from pros like you. You are the voice ofinnovation. Tell us what you think. Visit our socialmedia sites, and get the conversation started.We’re listening.Fluke. Keeping your world up and running.®Fluke CorporationPO Box 9090,Everett, WA 98206 U.S.A.www.facebook.com/fluke.corporationwww.twitter.com/flukecorpwww.youtube.com/flukecorporationFluke Europe B.V.PO Box 1186, 5602 BDEindhoven, The NetherlandsFor more information call:In the U.S.A. (800) 443-5853 or Fax (425) 446-5116In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222In Canada (800)-36-FLUKE or Fax (905) 890-6866From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116Web access: http://www.fluke.com©2003-2011 Fluke Corporation. Specifications subject to change without notice.Microsoft is a registered trademark of Microsoft Corporation. Printed in U.S.A.12/2011 1274458T C-US-N Volume 42Modification of this document is not permitted without written permissionfrom Fluke Corporation.More Fluke info online• Complete digitalcatalog• Measurement safety• Newest productswww.fluke.com/catalogContact us:United StatesGeneral product and salesinformation: 1-800-44-FLUKEfluke-info@fluke.comFluke Thermal Imagers:1-800-760-4523 (U.S. only) allother regions 1-425-446-4620Service and calibration:1-888-99-FLUKEParts: 1-800-526-4731CanadaGeneral product, sales, service,parts and calibration information:1-800-36-FLUKEcanada@fluke.comAustraliaGeneral product and salesinformation: (02) 8850-3333Parts: (02) 8850-3333Service and calibration:(02) 9771-9300SingaporeGeneral product and salesinformation: (65) 6799-5566info.asean@fluke.comService, parts and calibration:(65) 6799-5588service.asean@fluke.comJapanGeneral product and salesinformation: +81-3-3434-0181Service, parts and calibration:+81-3-3434-0188Other countries: 1+(425) 446-5500• Where to buy• Extended specs• Online store• How-to information