Renishaw product catalog issue 18 - Inspec Inc

More documents

Recommendations

Info

MCUlite-2 joystickPart number: A-5331-0015 Price: $691MCU5 joystick kitPart number: A-5121-0003 Price: $2,073MCU5 wireless joystickPart number: A-5121-0077 Price: $3,995NOTE: MCU joysticks are for use with UCC products only.Coordinate measuringmachine probes1-11PL1635 meter cable for MCU1.Part number: A-1016-8098 Price: $178PL16410 meter cable for MCU1.Part number: A-1016-8099 Price: $274PL17120 meter cable for MCU1.Part number: A-1016-8100 Price: $46112U retrofit cabinetPart number: A-5567-1000 Price: $2,501
PH20PH20 is another innovative measurement product fromRenishaw that transforms coordinate measuring machine(CMM) performance. For the first time, 5-axis technologydeveloped for the multi-award winning REVO® measurementsystem is available for touch-trigger applications on all sizes ofCMM.Coordinate measuringmachine probes1-12PH20’s unique ‘head touches’ allow measurement points to betaken by moving only the head rather than the CMM structure.Using only the rapid rotary motion of the head, points can betaken faster, and with improved accuracy and repeatability.Furthermore, 5-axis motion eliminates time spent indexing thehead. Together these speed increases typically result in a threefoldimprovement in throughput over conventional systems.PH20’s infinite positioning capability guarantees optimal featureaccess, minimizing stylus changes. Five-axis simultaneousmotion allows larger parts to be measured on the CMM byminimizing the space required around the part for head rotation.Users of the PH20 probe head will immediately have accessto the range of proven TP20 probe modules, providing a wideselection of trigger forces, directional sensing options andextensions to meet application requirements*. The detachablemodules provide crash protection and can be automaticallychanged using the MCR20 change rack.* Excepting the extended force modulePH20 features and benefits• Incorporates 5-axis measurement technology, minimizingCMM motion and the associated CMM dynamic errors.• Infinite positioning and 5-axis motion reduces nonproductivetransitions between features.• Infinite positioning and 5-axis motion aid access to difficultfeatures.• Rapid calibration with all positions inferred means moretime measuring.• Maximum reach up to 200 mm with maintained effectiveworking length.• Standard M2 styli for convenience.Hardware integration• The UCC controller is fundamental to the PH20 system.• The UCC controller features routines particular to 5-axismotion and head-touch measurement.• MCUlite-2 is the multi-function hand control unit required forthe system.• PH20 can fit to any machine, either directly to the quill orvia a shank using a range of mounting adaptors.• The PH20 is compatible with the existing range of TP20modules, excepting the extended force module.• MCR20NI is the recommended rack for stylus changing, butit is possible to use an MCR20.• No air supply is needed.Software integration• The Renishaw UCCserver software application willprovide the interface for PH20 control.• UCCserver is based on I++DME command protocol.• PH20 is fully integrated with Renishaw’s MODUSapplication software.
Page 1 and 2: Product catalogIssue 18IndustrialMe
Page 3 and 4: The Renishaw missionIntroduction2Re
Page 5 and 6: Fixed and manual probe headsPH1A sm
Page 7 and 8: MIHA manually indexable head, repea
Page 9 and 10: MH20iThe MH20i offers the significa
Page 11 and 12: RTP20 part numbersNon-rack kitA-540
Page 13: Motorized probe head accessoriesAM1
Page 17 and 18: PH20 shanksCoordinate measuringmach
Page 19 and 20: Specification summary REVO ®Operat
Page 21 and 22: REVO ® SFP1 surface finish probeSu
Page 23 and 24: TP20/TP20 NI modular probesCoordina
Page 25 and 26: TP20 probe kitsTP20 probe kit 1Incl
Page 27 and 28: MCR20The MCR20 module changing rack
Page 29 and 30: TP7MThe TP7M is designed to maintai
Page 31 and 32: TP200/TP200B probe kitsTP200 probe
Page 33 and 34: Special probing systemsSP25The SP25
Page 35 and 36: Coordinate measuringmachine probes1
Page 39 and 40: SCP80 stylus change portIndividual
Page 41 and 42: Gram gageThe gram gage allows you t
Page 43 and 44: 85 mm (3.35 in)60 mm(2.36 in)36.68
Page 45 and 46: CMM cablesManual probe head cablesC
Page 47 and 48: ExtensionsThe extensions and knuckl
Page 49 and 50: PI200-3The PI200-3 interface can be
Page 51 and 52: Autochange systemRenishaw’s autoc
Page 53 and 54: ACR3 autochange rackThe ACR3 forms
Page 55 and 56: Manual autojoint probe standRenisha
Page 57 and 58: Mahogany boxesProbe head boxesCoord
Page 59 and 60: Tool kitsTK1 tool kitThe TK1 tool k
Page 63 and 64: Inspection probes for machining cen
Page 65 and 66:
Machine tool probes2-4MP700The MP70
Page 67 and 68:
OMP40 continuedOMM optical receiver
Page 69 and 70:
OMP400 continuedOMI-2 optical recei
Page 71 and 72:
OMP60 continuedOMM optical receiver
Page 73 and 74:
RMP40RMP40 is the latest generation
Page 75 and 76:
RMP60MRMP60M is a modular version o
Page 77 and 78:
Machine tool probes2-16Shanks and T
Page 79 and 80:
NC4 tool setterNC4 is a non-contact
Page 81 and 82:
OTSThe OTS is a new optical transmi
Page 83 and 84:
TS27RThe TS27R is a tool setter for
Page 85 and 86:
TS34TS34 is a hard-wired tool sette
Page 87 and 88:
43798OMP40MOMP40M is a modular vers
Page 89 and 90:
43798RMP40MRMP40M is a modular vers
Page 91 and 92:
LP2/LP2DD replacement partsConversi
Page 93 and 94:
MP250MP250 is the next generation c
Page 95 and 96:
HPRA basesThe HPRA base is designed
Page 97 and 98:
Machine tool probes2-36HPPA standar
Page 99 and 100:
RP1, RP2 and RP3 tool setting probe
Page 101 and 102:
Receivers and interfacesOMI, OMI-2
Page 103 and 104:
Lathe tool setting arm interfacesTh
Page 105 and 106:
Tool setting software for machining
Page 107 and 108:
AxiSet Check-UpCompatible with comm
Page 109 and 110:
Machine tool probes2-48Renishaw Cap
Page 111 and 112:
Renishaw servicesRenishaw has set u
Page 113 and 114:
Note: The machine must be operation
Page 115 and 116:
Tool setting probe detailsTS27R Har
Page 117 and 118:
the versatile gauge The Renishaw EQ
Page 119 and 120:
Replacement equipmentStop buttonPar
Page 121 and 122:
EQUATOR MODUS software trainingGagi
Page 123 and 124:
XL laser calibration systemUsed for
Page 125 and 126:
12D5B 13162B1512C× 31716Portable l
Page 127 and 128:
OpticsAll Renishaw optics housings
Page 129 and 130:
CMM optics mounting kitDesigned spe
Page 131 and 132:
SoftwareLaserXL calibration softwar
Page 133 and 134:
Straightness accessory basePart num
Page 135 and 136:
XR20-W rotary axis calibrator and c
Page 137 and 138:
Centration aidThe centration aid fi
Page 139 and 140:
QC20-W ballbar kit with Zerodur®ca
Page 141 and 142:
QC20-W ballbar system spare partsPo
Page 143 and 144:
QC20-W spare parts continuedCenter
Page 145 and 146:
QC20-W spare parts continuedBluetoo
Page 147 and 148:
Portable laser measure mentand cali
Page 149 and 150:
Product rangeWelcome to non-contact
Page 151 and 152:
WelcomeNon-contact positionencoders
Page 153 and 154:
Operating principles of optical enc
Page 155 and 156:
RESOLUTE absolute optical encoder s
Page 157 and 158:
RGH22 series readheadNon-contact po
Page 159 and 160:
RGH25F series readheadNon-contact p
Page 161 and 162:
RGS20 and RGS40 gold scaleNon-conta
Page 163 and 164:
Page 165 and 166:
Ultra-high vacuum (UHV) encodersRES
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
SiGNUM series readheadNon-contact p
Page 173 and 174:
SiGNUM with FANUC serial interfaceN
Page 175 and 176:
TONiC encoder systemNon-contact pos
Page 177 and 178:
TONiC DOP (dual output) encoder sys
Page 179 and 180:
RGSZ20 gold scaleNon-contact positi
Page 181 and 182:
RELM linear ZeroMet scaleNon-contac
Page 183 and 184:
FASTRACK and RTLC-S high-accuracy i
Page 185 and 186:
RESM angle encoder scaleNon-contact
Page 187 and 188:
REXM/REXT ultra-high accuracy angle
Page 189 and 190:
Magnetic encoder overviewOnAxis enc
Page 191 and 192:
RM08 / RE08 incremental and SSI enc
Page 193 and 194:
NEW! Wrap-up incremental rotary enc
Page 195 and 196:
NEW! AksIM off-axis absolute rotary
Page 197 and 198:
Linear magnetic encodersThe linear
Page 199 and 200:
Non-contact positionencoders5-52Tec
Page 201 and 202:
RoLin component level magneticencod
Page 203 and 204:
Technical specificationsSystem data
Page 205 and 206:
RLE laser interferometer systemsRLD
Page 207 and 208:
Section 6Additive manufacturing sol
Page 209 and 210:
ApplicationsEarly adopters of laser
Page 211 and 212:
Section 7Styli and accessories
Page 213 and 214:
Styli and accessoriesTechnical spec
Page 215 and 216:
Styli and accessoriesM3 styli and e
Page 217 and 218:
Styli and accessoriesM5 styli and e
Page 219 and 220:
Styli and accessoriesTerminologyBDT
Page 221 and 222:
Styli and accessoriesProbing with t
Page 223 and 224:
M2 styliM2 threaded stylus rangeRub
Page 225 and 226:
M2 styliRuby ball styli (ceramic st
Page 227 and 228:
M2 styliRuby ball styli (carbon fib
Page 229 and 230:
M2 styliParallel hemispherical-ende
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
M3 styliStylus extensions (stainles
Page 237 and 238:
Page 239 and 240:
M4 styliRuby ball styliPart number
Page 241 and 242:
M4 styliStar styliPart number A-500
Page 243 and 244:
M4 styliTS27R styli - parallel shaf
Page 245 and 246:
M4 styliStylus extensionsPart numbe
Page 247 and 248:
M4 styliWalter styliM1.4 thread sty
Page 249 and 250:
M5 styliRuby ball styli (tungsten c
Page 251 and 252:
M5 styliRuby ball styli (1 mm - 10
Page 253 and 254:
M5 styliRuby ball styli (>50 mm EWL
Page 255 and 256:
Page 257 and 258:
M5 styliStylus extensions - thermo
Page 259 and 260:
M5 styliStylus extensions - thermo
Page 261 and 262:
M5 styliStylus extensions - aluminu
Page 263 and 264:
Styli for FARO ® armsThese styli h
Page 265 and 266:
M5 styli for Zeiss probing systemsM
Page 267 and 268:
M5 styli for Zeiss probing systemsT
Page 269 and 270:
Page 271 and 272:
M5 styli for Zeiss probing systemsC
Page 273 and 274:
Page 275 and 276:
M5 styli for Zeiss probing systemsS
Page 277 and 278:
M5 styli for Zeiss probing systemsB
Page 279 and 280:
Page 281 and 282:
M5 styli for Zeiss probing systemsB
Page 283 and 284:
M3 styli for Zeiss probing systemsM
Page 285 and 286:
Page 287 and 288:
M3 styli for Zeiss probing systems
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
M3 styli for Zeiss probing systemsS
Page 295 and 296:
M3 styli for Zeiss probing systemsR
Page 297 and 298:
AccessoriesAccessoriesStylus knuckl
Page 299 and 300:
AccessoriesCubes and boltsPart numb
Page 301 and 302:
Stylus kitsM2 stylus enhancement ki
Page 303 and 304:
Stylus kitsStylus kit 201 for M2 pr
Page 305 and 306:
Page 307 and 308:
Stylus kitsA-5003-6153 M3 stylus ki
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Stylus kitsA-5003-5913 M5 stylus ex
Page 319 and 320:
Renishaw Inc5277 Trillium BlvdHoffm
Page 321 and 322:
Renishaw repair servicesServices of
Page 323 and 324:
Probes continuedDescription Repair
Page 325 and 326:
Tool setting probes for machining c
Page 327 and 328:
Tool setting probes for turning cen
Page 329 and 330:
Replacement partsDescription Part n
show all

Renishaw product catalog issue 18 - Inspec Inc

Create successful ePaper yourself

Delete template?

Save as template?