Renishaw product catalog issue 18 - Inspec Inc

PH6 shanksShank Used on the following machines Part number PriceMS1/T Brown & Sharpe, Bridgeport, Elm Systems, Fanamation, Giddings & Lewis, Poli, M-1046-1121 $215& Portage MachineMS2/T Federal Products, Helmel, Kemco, Mora, Numerex, Starrett, Tokyo-Boeki, & Wenzel M-1046-1120 $151MS3/T Eley, Ferranti, LK Tool (meter 4), Tarus, W & A, & Warren M-1046-1126 $151MS4/T LK Tool (micro) M-1046-1128 $151MS5/T Ferranti M-1046-1122 $151MS6/T C.E. Johannson M-1046-1123 $151MS7/T Renault M-1046-1124 $151MS8/T Olivetti M-1046-1802 $151MS9/T MTI Corporation (UK) M-1046-4545 $151MS11/T Crown & Windley M-1046-2661 $151MS18/T Mora M-1046-7107 $151Standard base diameter 18.9 - 19.1 mm (0.74 - 0.75 in) unless stated43.9 mm(1.73 in)M5 × 0.8 mmØ 9.500 -9.512 mm(0.3740 -0.3745 in)25.4 mm(1.00 in)Ø 5.3 mm(0.209 in)Ø 9.497 -9.524 mm(0.3739 -0.3750 in)50.8 mm(2.00 in)Ø 20 mm(0.787 in)Ø 26.99 -27.0 mm(1.06 -1.63 in)45.57 mm(1.79 in)1/4 in BSFØ 10.008 -10.013 mm(0.3940 -0.3942 in)CirclipWasherBushp35 mm(1.38 in)Ø 5.3 mm(0.209 in)Ø 15.983 -15.994 mm(0.6293 -0.6297 in)Coordinate measuringmachine probes1-411/4 in BSFØ 30 mm(1.18 in)1/4 in BSF 1/4 in BSF 1/4 in BSF1/4 in BSFMS1/T MS2/T MS3/T MS5/T MS7/TØ 18.0 mm(0.709 in)Ø 24.8 mm(0.9764 in)92 mm (3.62 in)85 mm (3.35 in)Ø 24.995 - 25.000 mm(0.9841 - 0.3843 in)103 mm (4.06 in)Ø 5.3 mm(0.209 in)Ø 13.95 mm(0.550 in)Ø 5.3 mm(0.209 in)Ø 40.0 mm(1.575 in)50.0 mm(1.97 in )Ø 13.990 -13.996 mm(0.5508 - 0.5510 in)26 mm(1.02 in)Ø 14.996 -14.998 mm(0.5504 - 0.5905 in)37.0 mm(1.457 in)Ø 11.998 -11.993 mm(0.472 -0.477 in)1/4in BSFØ 30 mm1/4in BSF 1/4in BSF 1/4in BSF(1.18 in)MS8/T MS9/T MS11/T MS18/T