Download - OPTIMA SISTEMI

BP-003 User’s ManualThe format of bit image is shown below.n1×8d1dn2+1dn2×2+1High Bit高 位n2×8d2dn2+2dn2×2+2Low Bit低 位dndn2×2dn2×2×8GS /Print downloaded bit imageFormat: ASCII: GS / nDecimal: 29 47 n\Hex: 1D 2F nDescription:Print the downloaded bit image using the mode specified by n. n=0, 1, 2, 3, 48, 49, 50, 51.The bit image defined by GS * command. n specifies the mode as follows:n Mode Density in vertical Density in horizontal0, 48 Normal 203 DPI 203 DPI1, 49 Double-width 203 DPI 101 DPI2, 50 Double-height 101 DPI 203 DPI3, 51 Quadruple 101 DPI 101 DPIGS BFormat: ASCII: GS B nDecimal: 29 66 nHex: 1D 42 nDescription:When the LSB of n is 0, turn the white/black reverse mode off.When the LSB of n is 1, turn the white/black reverse mode on.Turn white/black reverse mode on/offGS HSelect print position of HRI characterFormat: ASCII: GS H nDecimal: 29 72 nHex: 1D 48 nDescription:Select the print position of Human Readable Interpretation (HRI) when printing a bar code, using n asfollows: n=0, 48: NO HRI printing. n=1, 49: above the barcode. n=2, 50: below the barcode. n=3, 51:Both above and below.GS LFormat: ASCII: GS L nL nHDecimal: 29 76 nL nHHex: 1D 4C nL nHDescription:Set the left margin to (nL+nH*256)*(horizontal or vertical motion unit); nL, nH=0~255.Horizontal or vertical motion unit is specified by GS P command.Set left marginGS PFormat: ASCII: GS P x yDecimal: 29 80 x yHex: 1D 50 x yDescription:Set horizontal or vertical motion unit- 40 -