Microwave cables and assemblies - Nkt-rf.ru

GENERAL ASSEMBLY INFORMATIONGENERAL ASSEMBLYINFORMATION8. Assemblies should be fixed in place without excess pressure. The use of cable ties should be avoidedwhere possible, as they can easily exert more force than this. If cable ties must be used then they shouldbe as wide as possible and still allow movement of the cable. Avoid placing fixings at regular intervals.9. Examine interfaces for damage and/or contamination before mating.10. Discharge connectors before mating or ensure that they are connected to a suitable ground.11. When mating connectors with a screwed interface always hold the connector bodies and turn only thecoupling nut. This avoids twisting the cable and ensures minimum wear on the connector pins.12. Do not exceed the specified torque.HUBER+SUHNER Microwave Cables and Assemblies 13