Microwave cables and assemblies - Nkt-rf.ru

More documents

Recommendations

Info

SUCOTEST_18For the highest standard of measurementProduct descriptionSUCOTEST_18 cable assemblies feature excellentelectrical performance (low insertion loss combinedwith unique loss stabilitiy and escellent return loss).SUCOTEST_18 is ideal for daily use in componentsand assembly shops, test labs and automatic testequipment applications.Product assortmentItem no.SUCOTEST_18/SMAm/SMAm/36“ 84002061SUCOTEST_18/Nm/Nm/36“ 84002060SUCOTEST_18/SMAm/Nm/36“ 84004594SUCOTEST_18/SMAm/SMAm/48“ 84003373SUCOTEST_18/Nm/Nm/48“ 84003372SUCOTEST_18/SMAm/Nm/48“ 84004006SUCOTEST_18/SMAm/SMAm/72“ 84004007SUCOTEST_18/Nm/Nm/72“ 84004070SUCOTEST_18/SMAm/Nm/72“ 84004595Outstanding Features• Applicable up to 18.0 GHz• Low insertion loss• Excellent VSWR• Unique loss stabilitySUCOTEST• There is no cable spring back during measurement procedures; the assembly stays in position.HUBER+SUHNER AG microwave cables and assemblies 85
SUCOTEST 18 - specificationsElectrical specificationsImpedance50 OhmOperating frequency18 GHzVelocity of propagation 77 %Capacitance87 pF/m / 26.5 pF/ftTime delay4.3 ns/m / 1.31 ns/ftInsulation resistance> 5 x 103 Mega OhmDielectric withstand voltage2500 V rmsFrequency range up to 2.0 GHz 2.01 - 4.0 GHz 4.01 - 6.0 GHz 6.01 - 12.0 GHz 12.01-18.0 GHzPower handling, 25°C, sea level (W) > 391 > 277 > 225 > 160 > 131Return loss (dB) > 30 >28 > 25 > 21 > 19Insertion loss (dB) see table below see table below see table below see table below see table belowInsertion loss stability vs. shaking (dB) < 0.03 < 0.03 < 0.03 < 0.03 < 0.03Insertion loss stability vs. bending (dB) < 0.03 < 0.04 < 0.04 < 0.05 < 0.05Insertion loss stability vs. torsion (dB) < 0.03 < 0.04 < 0.04 < 0.05 < 0.05General specificationsAssembly length see table below Materials and finishesCable diameter 4.6 mm / 0.181 inch Cable jacket FP, blueTemperature range -55...+105 °C Cable dielectric low density PTFEPrefered bending radius 100 mm / 4.0 inch Taper sleeve Santoprene / blackConnector retention force > 200 N Marking sleeve Crosslinked polyolefin / whiteRecommended mating torque SMA 0.8 ... 1.1 Nm / 7.1 ... 9.7 in.lbs Connector contacts Beryllium - copper, gold platedRecommended mating torque N 0.68 ... 1.13 Nm / 6.0 ... 10.0 in.lbs Connector insulations PTFEDurability > 500 matings Connector body Stainless steel, passivatedConnector interface SMA MIL-STD-348A/310 Connector nut Stainless steel, passivatedConnector interface N MIL-STD-348A/304 Gasket Silicon rubberWeightsee table belowProduct specific dataHUBER+SUHNER Assembly length WeightInsertion losscable type(ref.plane to ref.plane)up to 2.0GHz2.01 - 4.0GHz4.01 - 6.0GHz6.01 - 12.0GHz12.01 - 18.0GHzST-18/SMAm/SMAm/36 914 mm / 36 inch 68 gram < 0.48 dB < 0.68 dB < 0.84 dB < 1.21 dB < 1.51 dBST-18/Nm/Nm/36 914 mm / 36 inch 110 gram < 0.48 dB < 0.68 dB < 0.84 dB < 1.21 dB < 1.51 dBST-18/SMAm/Nm/36 914 mm / 36 inch 90 gram < 0.48 dB < 0.68 dB < 0.84 dB < 1.21 dB < 1.51 dBST-18/SMAm/SMAm/48 1219 mm / 48 inch 80 gram < 0.61 dB < 0.88 dB < 1.09 dB < 1.57 dB < 1.95 dBST-18/Nm/Nm/48 1219 mm / 48 inch 122 gram < 0.61 dB < 0.88 dB < 1.09 dB < 1.57 dB < 1.95 dBST-18/SMAm/Nm/48 1219 mm / 48 inch 101 gram < 0.61 dB < 0.88 dB < 1.09 dB < 1.57 dB < 1.95 dBST-18/SMAm/SMAm/72 1829 mm / 72 inch 108 gram < 0.89 dB < 1.28 dB < 1.58 dB < 2.29 dB < 2.85 dBST-18/Nm/Nm/72 1829 mm / 72 inch 157 gram < 0.89 dB < 1.28 dB < 1.58 dB < 2.29 dB < 2.85 dBST-18/SMAm/Nm/72 1829 mm / 72 inch 134 gram < 0.89 dB < 1.28 dB < 1.58 dB < 2.29 dB < 2.85 dB86 HUBER+SUHNER microwave cables and assemblies
Page 1 and 2:
Microwave cables and assembliesEdit
Page 3 and 4:
IntroductionGeneral Assembly Inform
Page 6 and 7:
Microwave cable assembliesFor over
Page 8 and 9:
GENERAL ASSEMBLY INFORMATIONGENERAL
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
APPLICATIONSWHERE TIME IS OF THE ES
Page 18 and 19:
SEMI-RIGIDThe form-stable microwave
Page 20 and 21:
SEMI-RIGIDThe form-stable microwave
Page 22 and 23:
SEMI-RIGID EZ_47_TP_M17Cable attenu
Page 24 and 25:
SEMI-RIGID EZ_47_AL_TPCable attenua
Page 26 and 27:
SEMI-RIGID EZ_86_TP_M17Cable attenu
Page 28 and 29:
SEMI-RIGID EZ_86_AL_TP_M17Cable att
Page 30 and 31:
SEMI-RIGID EZ_118_TPCable attenuati
Page 32 and 33:
SEMI-RIGID EZ_141_TP_M17Cable atten
Page 34 and 35:
SEMI-RIGID EZ_141_AL_TP_M17Cable at
Page 36 and 37: SEMI RIGID EZ_250_TP_M17Cable atten
Page 38 and 39: SEMI RIGID EZ_250_AL_TPCable attenu
Page 40 and 41: SEMI-RIGIDA wide range of standard
Page 42 and 43: SEMI-RIGIDSuitable connectorsHUBER+
Page 44 and 45: SUCOFORMThe handformable alternativ
Page 46 and 47: SUCOFORMThe handformable alternativ
Page 48 and 49: SUCOFORM_47_CU / _47_CU_LSFHCable a
Page 50 and 51: SUCOFORM_86 / _86_PE / _86_FEPCable
Page 52 and 53: SUCOFORM_141 / _141_PE / _141_FEPCa
Page 54 and 55: SUCOFORM_141_CU / _141_CU_PECable a
Page 56 and 57: SUCOFORM_141_CU_FEP / _141_CU_LSFH-
Page 58 and 59: SUCOFORM 250-01 / _250-01_FEPCable
Page 60 and 61: SUCOFORMA wide range of standard co
Page 62 and 63: SUCOFORMSuitable connectorsHUBER+SU
Page 64 and 65: MULTIFLEXThe flexible alternative t
Page 66 and 67: MULTIFLEXThe flexible alternative t
Page 68 and 69: MULTIFLEX_86Cable attenuationNomina
Page 70 and 71: MULTIFLEX_141Cable attenuationNomin
Page 72 and 73: MULTIFLEXSuitable connectorsHUBER+S
Page 74 and 75: S-SERIESThe economical, low loss mi
Page 76 and 77: S-SERIESThe economical, low loss mi
Page 78 and 79: S-SERIES S_04272_BCable attenuation
Page 80 and 81: S-SERIES S_04212_BCable attenuation
Page 82 and 83: S-SERIES S_04262_B-01Cable attenuat
Page 84 and 85: SUCOTESTFor the highest standard of
Page 88 and 89: SUCOTEST_18APrecision at a constant
Page 90 and 91: SUCOFLEX ® 100The high performance
Page 92 and 93: SUCOFLEX ® 100The high performance
Page 94 and 95: SUCOFLEX 101VariationsSUCOFLEX_101
Page 96 and 97: SUCOFLEX_101Cable attenuationNomina
Page 98 and 99: SUCOFLEX_101_PCable attenuationNomi
Page 100 and 101: SUCOFLEX_101_PECable attenuationNom
Page 106 and 107: SUCOFLEX 102Suitable connectorsConn
Page 112 and 113: SUCOFLEX 104VariationsSUCOFLEX_104,
Page 118 and 119: SUCOFLEX_104_PECable attenuationNom
Page 120 and 121: SUCOFLEX 104Suitable connectorsSF_1
Page 128 and 129: SUCOFLEX 106Suitable connectorsConn
Page 130 and 131: SUCOFLEX 100Variations of ruggedisa
Page 132 and 133: SUCOFLEX 100 - Special solutionsPha
Page 134 and 135: SUCOFLEX 100Phase matchingDefinitio
Page 136 and 137:
SUCOFLEX 100 - stock assembliesSUCO
Page 138 and 139:
SUCOFLEX 100 - stock assembliesSUCO
Page 140 and 141:
SUCOFLEX 100Dimensioned sketches -
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
SUCOFLEX 100Mounting holesML4ML8ML1
Page 166 and 167:
SUCOFLEX ® 300The light weight, hi
Page 168 and 169:
SUCOFLEX ® 300The lightweight, hig
Page 170 and 171:
SUCOFLEX ® 300 - Lightweight Serie
Page 172 and 173:
SUCOFLEX ® 301Electrical cable dat
Page 174 and 175:
SUCOFLEX ® 30116_SMA-161 - SMA rig
Page 176 and 177:
SUCOFLEX ® 302 / 302D11_SMA-254 -
Page 178 and 179:
SUCOFLEX ® 304 / 304D11_SMA-487 -
Page 180 and 181:
SUCOFLEX ® 304 / 304D11_TNC-457 -
Page 182 and 183:
TypePageSUCOFLEX ® 100 (cont.)SUCO
Page 184 and 185:
Selection HelpFlexibilityForm-stabl
show all

Microwave cables and assemblies - Nkt-rf.ru

Create successful ePaper yourself

Delete template?

Save as template?