MV Retrofit F100 F200 - DV2 type - Schneider Electric

MV retrofitFluair switchboardF100/F200 cubiclesReplacement of FG1 and FG2 circuit breakersby a new circuit breaker DV2 type

01Replacement of FG1 and FG2 circuit breakersby a new circuit breaker DV2 typeFluair range : F100/F200 cubiclesSchneider Electric retrofit solution consists of remplacing the old FG1 and FG2 circuit breakersby a new circuit breaker DV2 type.@ time of shutdown reduced@ continuity of service guaranted@ fast and easy implementationFG1 and FG2 circuit breakersSF6 circuit breakers@ 1980: beginning sales@ 1998: end of sales@ 2010: end of lifeElectrical characteristicsCircuit breaker FG1 FG2Rated voltage (kV) 7,2 to 17,5 7,2 to 17,5Rated current (A) 630 to 1250 630 to 3150Rated short circuit (kA) 25 to 31,5 25 to 50Phase to phase (mm) 180 180/240DV2 circuit breakerDV2 with lateral operating mechanismAll mechanical and electrical functions are adapted to the existing cubicle@ Electric motor (MCH)@ Shunt closing release (YF)@ Shunt opening release (YO1)@ Under voltage release (YM) or Mitop@ 6 ‘‘open/closed’’ auxiliary contacts@ Operation counter@ LockingElectrical characteristics according to IEC 62271-100Circuit breakerDV2Rated voltage Ur kV 50/60Hz 7,2 to 17,5Insulated voltage- power frequency withstand Ud kV 50 Hz 1mn 50- lightning impulse withstand Up kV peak 60 to 90Rated current Ir A 630 to 2500Short circuit current Isc kA 25 to 40Phase to phasemm 180/240Schneider Electric Projects & Engineering Center F-38050 Grenoble Cedex 9 Telephone: 33-(0)4-76-57-60-60 www.schneider-electric.com© 2009 Schneider Electric. All rights reserved.08/2009