or College if it is a CoET co - University of Dar es salaam
12.07.2015 • Views
Share Embed Flag

or College if it is a CoET co - University of Dar es salaam

or College if it is a CoET co - University of Dar es salaam

or College if it is a CoET co - University of Dar es salaam

SHOW MORE
SHOW LESS
ePAPER READ
DOWNLOAD ePAPER
  • No tags were found...
udsm.ac.tz

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

356 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamThe <strong>co</strong>de <strong>co</strong>ns<strong>is</strong>ts <strong>of</strong> five characters, thefirst two ident<strong>if</strong>y the department, inst<strong>it</strong>ute<strong>or</strong> program (<strong>or</strong> <strong>College</strong> <strong>if</strong> <strong>it</strong> <strong>is</strong> a <strong>CoET</strong><strong>co</strong>urse). The third dig<strong>it</strong> ident<strong>if</strong>i<strong>es</strong> theyear <strong>of</strong> the <strong>co</strong>urse, the fourth ident<strong>if</strong>i<strong>es</strong>the academic un<strong>it</strong> and f<strong>if</strong>th ident<strong>if</strong>i<strong>es</strong>the d<strong>if</strong>ferent <strong>co</strong>urs<strong>es</strong> w<strong>it</strong>hin the un<strong>it</strong>,(<strong>or</strong> <strong>College</strong> <strong>if</strong> <strong>it</strong> <strong>is</strong> a <strong>CoET</strong> <strong>co</strong>urse). Thedepartmental <strong>co</strong>d<strong>es</strong> are as follows:CHCLCPCSDSDPEEEGEMENEPME- Chem<strong>is</strong>try- Communication Skills- Chemical and Proc<strong>es</strong>sEngineering- Computer and SystemsEngineering- Development Studi<strong>es</strong>- Power Engineering- Electrical Engineering- pCET General Course- Engineering Materials- Energy Engineering- Electrical Power Engineering- Mechanical Engineering(General)MG - Engineering Management andEntrepreneurshipMM - M i n i n g a n d M i n e r a lProc<strong>es</strong>singMT - Mathematics f<strong>or</strong> non-maj<strong>or</strong>sOP - Optional Cours<strong>es</strong>PD - D<strong>es</strong>ign and ProductionEngineeringSD - Structural EngineeringTE - Tele<strong>co</strong>mmunicationsEngineeringTR - Transp<strong>or</strong>t EngineeringTM - Construction Technology andManagementWR - Water R<strong>es</strong>ourc<strong>es</strong> EngineeringWR - Water R<strong>es</strong>ourc<strong>es</strong> ManagementFB - Food and BiochemicalEngineeringCOMMON COURSES TO ALLPROGRAMMESFirst YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCL 111: CommunicationSkills f<strong>or</strong> Engineers 2.0ECS 171: Introduction toComputers andProgrammingin Pascal 2.0EDS 101: DevelopmentPerspectiv<strong>es</strong> I 2.0EPD 100: EngineeringDrawing 2.5ESD 105: Statics 3.0EMT161: Matric<strong>es</strong> and BasicCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0ESem<strong>es</strong>ter 2Un<strong>it</strong>sMG 120: Introduction toEntrepreneurship 1.0DS 102: DevelopmentPerspectiv<strong>es</strong> II 2.0EMT 171: One Variable Calculus& D<strong>if</strong>f. Eq. f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0EBACHELOR OF SCIENCE INCHEMICAL AND PROCESSENGINEERINGFirst YearSem<strong>es</strong>ter 1Un<strong>it</strong>sDP 171: Fundamentals <strong>of</strong>ElectricalEngineering I 2.0EEG 112: W<strong>or</strong>kshop Training I 2.5Sem<strong>es</strong>ter 2DP 172: Fundamentals <strong>of</strong>Electrical EngineeringII 2.0E

357 Prospectus f<strong>or</strong> the Year 2005/2006Un<strong>it</strong>sEG 113: W<strong>or</strong>kshop Training II 2.5CP 102: Fundamentals <strong>of</strong>Chemical & Proc<strong>es</strong>sEngineering 1.0EME 106: Strength <strong>of</strong> Materials I 2.0EPD 101: Computer AidedDrafting 2.0EBACHELOR OF SCIENCE INFOOD AND BIOCHEMICALENGINEERINGFirst YearSem<strong>es</strong>ter 1Un<strong>it</strong>sDP 171: Fundamentals <strong>of</strong>Electrical EngineeringI 2.0EEG 112: W<strong>or</strong>kshop Training I 2.5Sem<strong>es</strong>ter 2Un<strong>it</strong>sDP 172: Fundamentals <strong>of</strong>Electrical EngineeringII 2.0EPD 101: Computer AidedDrafting 2.0EFB 102: Fundamentals <strong>of</strong>Food and BiochemicalEngineering 2.0EME 106: Strength <strong>of</strong>Materials I 2.0EEG 113: W<strong>or</strong>kshop Training II 2.5BACHELOR OF SCIENCE INCIVIL AND STRUCTURALENGINEERINGBACHELOR OF SCIENCE INCIVIL AND TRANSPORTATIONENGINEERINGBACHELOR OF SCIENCE INCIVIL AND WATER RESOURCESENGINEERINGFirst YearSem<strong>es</strong>ter 1Un<strong>it</strong>sEG 100: W<strong>or</strong>kshop Training 3.0TR 110: Surveying 4.0ESem<strong>es</strong>ter 2SD 101: Civil EngineeringDrawing 2.5ESD 106: Dynamics <strong>of</strong> Solids 1.0ETM 101: Introduction to CivilEngineering and theBuilt Environment 1.0ESD 230: Introduction to BuildingD<strong>es</strong>ign 2.0ESD 211: Civil EngineeringMaterials I 3.0EBACHELOR OF SCIENCE INCOMPUTER ENGINEERING ANDINFORMATION TECHNOLOGYBACHELOR OF SCIENCE INELECTRICAL ENGINEERINGBACHELOR OF SCIENCEIN ELECTRICAL POWERENGINEERINGBACHELOR OF SCIENCE INTELECOMMUNICATIONSENGINEERINGFirst YearSem<strong>es</strong>ter 1Un<strong>it</strong>sDP 171: Fundamentals <strong>of</strong>Electrical EngineeringI 2.0EEG 110: W<strong>or</strong>kshop Training I 3.0Sem<strong>es</strong>ter 2DP 172: Fundamentals <strong>of</strong> ElectricalEngineering II 2.0E

358 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamUn<strong>it</strong>sEG 111: W<strong>or</strong>kshop Training II 3.0ME 106: Strength <strong>of</strong> Materials I 2.0TE 171: Introduction toElectronicsEngineering 3.0EBACHELOR OF SCIENCEIN ELECTROMECHANICALENGINEERINGFirst YearSem<strong>es</strong>ter 1Un<strong>it</strong>sDP 171: Fundamentals <strong>of</strong>Electrical EngineeringI 2.0EEG 116: W<strong>or</strong>kshop Training I2.5ME 112: T<strong>es</strong>ting <strong>of</strong> Materials 1.0ESem<strong>es</strong>ter 2DP 172: Fundamentals <strong>of</strong>Electrical EngineeringII 2.0EME 106: Strength <strong>of</strong> MaterialsI 2.0EME 116: Structure andTransf<strong>or</strong>mation <strong>of</strong>Materials 3.0EME 170: Materials TechnologyPractical I 0.5PD 101: Computer AidedDrafting 2.0EPD 152: Fundamentals <strong>of</strong>Industrial D<strong>es</strong>ignEngineering 2.0EEG 117: W<strong>or</strong>kshop Training II 2.5BACHELOR OF SCIENCE ININDUSTRIAL ENGINEERINGAND MANAGEMENTFirst YearSem<strong>es</strong>ter 1EG 116: W<strong>or</strong>kshop Training I 2.5Un<strong>it</strong>sDP 171: Fundamentals <strong>of</strong>Electrical Engineering I 2.0ESem<strong>es</strong>ter 2EG 117: W<strong>or</strong>kshop Training II 2.5PD 101: Computer AidedDrafting2EDP 172: Fundamentals <strong>of</strong>Electrical Engineering IIPD 152 : Fundamentals <strong>of</strong>Industrial D<strong>es</strong>ignEngineering IME 106: Strength <strong>of</strong> Materials IMG 100: Fundamentals <strong>of</strong>Industrial Engineeringand ManagementBACHELOR OF SCIENCE INMECHANICAL ENGINEERINGFirst Year2E2E2E2ESem<strong>es</strong>ter 1Un<strong>it</strong>sDP 171: Fundamentals <strong>of</strong>Electrical EngineeringI 2.0EEG 116: W<strong>or</strong>kshop Training I 2.5ME 112: T<strong>es</strong>ting <strong>of</strong> Materials 1.0ESem<strong>es</strong>ter 2DP 172: Fundamentals <strong>of</strong>Electrical EngineeringII 2.0EME 106: Strength <strong>of</strong> MaterialsI 2.0EME 116: Structure andTransf<strong>or</strong>mation <strong>of</strong>Materials 3.0EME 170: Materials TechnologyPractical I 0.5PD 101: Computer AidedDrafting 2.0ETE 171: Introduction toElectronicsEngineering 3.0EUn<strong>it</strong>s

359 Prospectus f<strong>or</strong> the Year 2005/2006PD 152: Fundamentals <strong>of</strong>Industrial D<strong>es</strong>ignEngineering 2.0EEG: 117: W<strong>or</strong>kshop Training II 2.5BACHELOR OF SCIENCEIN MINERAL PROCESSINGENGINEERINGBACHELOR OF SCIENCE INMINING ENGINEERINGFirst YearSem<strong>es</strong>ter 1DP 171: Fundamentals <strong>of</strong>Electrical EngineeringI 2.0EEG 114: W<strong>or</strong>kshop Training I 2.5GY 100: Introduction to Geologyand GeologicalProc<strong>es</strong>s<strong>es</strong> 3.0ESem<strong>es</strong>ter 2ME 106: Strength <strong>of</strong> Materials I 2.0EDP 172: Fundamentals <strong>of</strong>ElectricalEngineering II 2.0EEG 115: W<strong>or</strong>kshop Training II 2.0GY 120: Earth Materials(Rocks and Minerals) 3.0EPD 101: Computer AidedDrafting 2.0EBACHELOR OF SCIENCEIN PRODUCTIONENGINEERINGFirst YearSem<strong>es</strong>ter 1DP 171: Fundamentals <strong>of</strong>Electrical EngineeringI 2.0EEG 116: W<strong>or</strong>kshop Training I 2.5Un<strong>it</strong>sME 112: T<strong>es</strong>ting <strong>of</strong> Materials 1.0ESem<strong>es</strong>ter 2DP 172: Fundamentals <strong>of</strong>Electrical EngineeringII 2.0EEG 117: W<strong>or</strong>kshop Training II 2.5ME 106: Strength <strong>of</strong> MaterialsI 2.0EME 116: Structure andTransf<strong>or</strong>mation <strong>of</strong>Materials 3.0EME 170: Materials TechnologyPractical I 0.5PD 101: Computer AidedDrafting 2.0EPD 152 Fundamentals <strong>of</strong>Industrial D<strong>es</strong>ignEngineering 2.0ETE 171: Introduction toElectronicsEngineering 3.0EFACULTY OF CIVIL ENGINEERINGAND THE BUILT ENVIRONMENTBACHELOR OF SCIENCE INC I V I L A N D S T R U C T U R A LENGINEERINGSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong> 3.0ESD 206: Mechanics <strong>of</strong>Materials 2.0ESD 221: The<strong>or</strong>y <strong>of</strong> StaticallyDeterminateStructur<strong>es</strong> 3.0ESD 212: Civil EngineeringMaterials II 3.0EWR 211: Fluid Mechanics f<strong>or</strong>

362 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamStructur<strong>es</strong> 2.0ETM 321: Project Appra<strong>is</strong>al andPlanning Techniqu<strong>es</strong> 3.0EUn<strong>it</strong>sTR 320: Highway GeometricD<strong>es</strong>ign 2.0ETR 331: Highway Materials 3.0EWR 321: Fundamentals <strong>of</strong>EngineeringHydrology 2.0ESD 341: D<strong>es</strong>ign <strong>of</strong> Reinf<strong>or</strong>cedConcrete Structur<strong>es</strong> 3.0EElectiv<strong>es</strong> (Minimum) 6.0Third YearSem<strong>es</strong>ter 2TM 322: Civil EngineeringProcedur<strong>es</strong> 3.0ETR 310: Traffic Engineeringand Management 3.0ETR 332: Pavement Analys<strong>is</strong>and D<strong>es</strong>ign 3.0EElectiv<strong>es</strong> (minimum)6.0Electiv<strong>es</strong> (Minimum 12 Un<strong>it</strong>s)TM 301: ConstructionTechnology 2.0ETR 333: Airp<strong>or</strong>t, Harbour andRailway Engineering 3.0EWR 341:Epidemiology 1.0ESD 322: Matrix and PlasticThe<strong>or</strong>y in Analys<strong>is</strong><strong>of</strong> Structur<strong>es</strong> 2.0ESD 341: D<strong>es</strong>ign <strong>of</strong> Reinf<strong>or</strong>cedConcrete Structur<strong>es</strong> 3.0ESD 350: D<strong>es</strong>ign <strong>of</strong> TimberStructur<strong>es</strong> 2.0ESD 360: D<strong>es</strong>ign <strong>of</strong> SteelStructur<strong>es</strong> 2.0EWR 322: Rivers and R<strong>es</strong>ervoirs 2.0EWR 323: Applied Hydrology 2.0EWR 325: Irrigation Engineering 2.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sTR 441: Labour Based RoadEngineering 3.0ETR 430: Pavement Maintenance 3.0ETR 442: Transp<strong>or</strong>tationE<strong>co</strong>nomics 3.0EElectiv<strong>es</strong> (minimum)6.5TR 498: Final Project (I) 2.0Fourth YearSem<strong>es</strong>ter 2TM 400: Engineering Ethics andPr<strong>of</strong><strong>es</strong>sional Conduct 1.0EMG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0ETR 499: Final Project (II) 4.0Electiv<strong>es</strong> (minimum) 4.0Electiv<strong>es</strong> (Minimum 10.5 Un<strong>it</strong>s)SD 421: Dynamics <strong>of</strong>Structur<strong>es</strong> 2.0ESD 422: Numerical Methods inStructural Engineering 2.0ESD 442: Special Aspects <strong>of</strong>Reinf<strong>or</strong>ced ConcreteD<strong>es</strong>ign 2.0ESD 443: Fundamentals <strong>of</strong>Pr<strong>es</strong>tr<strong>es</strong>sed Concrete 2.0ESD 470: D<strong>es</strong>ign <strong>of</strong> Bridg<strong>es</strong> 2.0ETM 420: Management <strong>of</strong>Construction Projects 3.0ETM 401: Maintenance andRehabil<strong>it</strong>ation <strong>of</strong>Constructed Facil<strong>it</strong>i<strong>es</strong> 3.0ETR 410: Special foundations 2.0ETR 430: Pavement Maintenance 3.0ETR 441: Labour Based Road

364 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> Salaam6.0Elective (Minimum 10.0 Un<strong>it</strong>s)TM 301: ConstructionTechnology 2.0ETR 310: Traffic Engineeringand Management 3.0Un<strong>it</strong>sTR 332: Pavement analys<strong>is</strong> andD<strong>es</strong>ign 3.0SD 321: The<strong>or</strong>y <strong>of</strong> StaticallyIndeterminate Structur<strong>es</strong> 2.0ESD 322: Matrix & PlasticThe<strong>or</strong>y in analys<strong>is</strong> <strong>of</strong>Structur<strong>es</strong> 2.0ESD 350: D<strong>es</strong>ign <strong>of</strong> TimberStructur<strong>es</strong> 2.0ESD 360: D<strong>es</strong>ign <strong>of</strong> SteelStructur<strong>es</strong> 2.0EAny approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sWR 410: Hydraulic Structur<strong>es</strong>and Machinery 2.0EWR 423: Applied Hydrogeology 2.0EWR 442: Introduction to WaterChem<strong>is</strong>try andMicrobiology 3.0EWR 450: Water R<strong>es</strong>ourc<strong>es</strong>Management 1.0EWR 460: Management <strong>of</strong>Solid and HazardousWaste 3.0EWR 470: Environmental ImpactAss<strong>es</strong>sment 2.0EElectiv<strong>es</strong> (minimum) 1.5WR 498: Final Project I 2.0Sem<strong>es</strong>ter 2TM 400: Engineering Ethicsand Pr<strong>of</strong><strong>es</strong>sionalConduct 1.0MG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0WR 499: Final Project II 6.0Electiv<strong>es</strong> (minimum)3.0Electiv<strong>es</strong> (Minimum 4.5 Un<strong>it</strong>s)Un<strong>it</strong>sTM 420: Management <strong>of</strong>Construction Projects 3.0ETR 410: Special Foundations 2.0ETR 430: Pavement Maintenance 3.0ETR 441: Labour Based RoadEngineering 3.0ESD 421: Dynamics <strong>of</strong> Structur<strong>es</strong> 2.0ESD 422: Numerical Methods inStructural Engineering 2.0ESD 441: D<strong>es</strong>ign <strong>of</strong> MasonryStructur<strong>es</strong> 1.0ESD 442: Special Aspects <strong>of</strong>Reinf<strong>or</strong>ced ConcreteD<strong>es</strong>ign 2.0ESD 443: Pr<strong>es</strong>tr<strong>es</strong>sed Concrete 2.0ESD 470: D<strong>es</strong>ign <strong>of</strong> Bridg<strong>es</strong> 2.0ETM 401: Maintenance andRehabil<strong>it</strong>ation <strong>of</strong>Constructed Facil<strong>it</strong>i<strong>es</strong> 2.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)FACULTY OF ELECTRICALAND COMPUTER SYSTEMSENGINEERINGBACHELOR OF SCIENCE INCOMPUTER ENGINEERING ANDINFORMATION TECHNOLOGYSe<strong>co</strong>nd Year

365 Prospectus f<strong>or</strong> the Year 2005/2006Sem<strong>es</strong>ter 1Un<strong>it</strong>sCS 211: Measurements &InstrumentationEngineering I 3.0ECS 231: Computer Programmingin C 2.0EDP 271: Electrical Netw<strong>or</strong>kAnalys<strong>is</strong> I 3.0EUn<strong>it</strong>sDP 273: EngineeringElectromagnetics I 2.0EME 206: Strength <strong>of</strong> MaterialsII 3.0EME 215: Structure andApplication <strong>of</strong>Electrical Materials 1.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0ETE 241: Analogue Electronic f<strong>or</strong>Engineers 2.0ECS 241: Computer Netw<strong>or</strong>king I 2.0ESem<strong>es</strong>ter 2CS 212: Measurements &InstrumentationEngineering II 3.0ECS 251: Introduction toComputerEngineering 3.0ECS 232: Introduction toObject-<strong>or</strong>ientedProgramming 2.0EDP 272: Electrical Netw<strong>or</strong>kAnalys<strong>is</strong> II 3.0EDP 274: EngineeringElectromagnetics II 2.0EMT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-Maj<strong>or</strong>s. 3.0ETE 242: Dig<strong>it</strong>al Electronics f<strong>or</strong>Engineers I 2.0ECS 242: Computer Netw<strong>or</strong>kingII 2.0EThird YearSem<strong>es</strong>ter 1CS 321: Control SystemsEngineering I 3.0ECS 331: S<strong>of</strong>tware Engineering I 2.0ECS 333: Computer Hardware 3.0ECS 351: Computer Engineering I 3.0ECS 353: Micro ComputerSystems I 2.0EElectiv<strong>es</strong> (minimum)3.0ESem<strong>es</strong>ter 2Un<strong>it</strong>sCS 322: Control SystemsEngineering II 3.0ECS 332: S<strong>of</strong>tware Engineering II 2.0ECS 334: Operating Systems 3.0ECS 352: Computer Engineering II 3.0ECS 354: Micro ComputerSystems II 2.0ETE 342: Dig<strong>it</strong>al Electronics f<strong>or</strong>Engineers I 4.0EElectiv<strong>es</strong> (minimum)3.0EElectiv<strong>es</strong> (Minimum 5.0 Un<strong>it</strong>s)DP 313: Power Electronics I 2.0EDP 314: Power Electronics II 2.0EDP 331: Electrical Power Plants 2.0EDP 333: Introduction toPower Engineering II 2.0ETE 311: AnalogueTele<strong>co</strong>mmunications I3.0ETE 312: Dig<strong>it</strong>alTele<strong>co</strong>mmunications I 3.0EAny approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)Fourth YearSem<strong>es</strong>ter 1CS 431: S<strong>of</strong>tware EngineeringUn<strong>it</strong>s

366 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamIII 1.0ECS 441: Computer Netw<strong>or</strong>king &Parallel Computing I 2.0ECS 451: Computer EngineeringIII 3.0ECS 498: Final Project I 2.0EDP 471: Electrical Safety &Maintenance 2.0EElectiv<strong>es</strong> (minimum)3.0ESem<strong>es</strong>ter 2CS 432: S<strong>of</strong>tware Engineering IV 1.0ECS 442: Computer Netw<strong>or</strong>king &Parallel Computing II 1.0EUn<strong>it</strong>sCS 452: Micro<strong>co</strong>mputer SystemsIII 2.0ECS 499: Final Project II 4.0ETM 400: Engineering Ethicsand Pr<strong>of</strong><strong>es</strong>sionalConduct 1.0ELW 306: Law f<strong>or</strong> Engineers 2.0EMG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0ETE 442: Dig<strong>it</strong>al Electronics f<strong>or</strong>Engineers II 3.0EElectiv<strong>es</strong> (minimum)3.0EElectiv<strong>es</strong> (Minimum 4.0 Un<strong>it</strong>s)CS 421: Control SystemsEngineering III 2.0ECS 480: Selected Topics inComputer Engineering &IT 2.0EDP 421: Electrical InsulatingMaterials 1.0EMG 440: EngineeringE<strong>co</strong>nomics 2.0EMG 441: Human R<strong>es</strong>ourc<strong>es</strong>Management 2.0ETE 471: Introduction toVLSI 3.0EAny Approved <strong>co</strong>urse Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)BACHELOR OF SCIENCE INELECTRICAL ENGINEERINGSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCS 211: Measurements &InstrumentationEngineering I 3.0ECS 231: Computer Programmingin C 2.0EDP 271: Electrical Netw<strong>or</strong>kAnalys<strong>is</strong> I 3.0EUn<strong>it</strong>sDP 273: EngineeringElectromagnetics I 2.0EME 206: Strength <strong>of</strong> Materials II 3.0EME 215: Properti<strong>es</strong> <strong>of</strong> ElectricalMaterials 1.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0ETE 241: Analogue Electronicsf<strong>or</strong> Engineers I 2.0ESem<strong>es</strong>ter 2CS 212: Measurements &InstrumentationEngineering II 3.0ECS 251: Introduction toComputerEngineering 3.0ECS 232: Introduction toObject-<strong>or</strong>ientedProgramming 2.0EDP 272: Electrical Netw<strong>or</strong>kAnalys<strong>is</strong> II 3.0EDP 274: EngineeringElectromagnetics II 2.0EME 207: Mechanics <strong>of</strong>Machin<strong>es</strong> 2.0E

367 Prospectus f<strong>or</strong> the Year 2005/2006ME 216: Class<strong>if</strong>ication andT<strong>es</strong>ting <strong>of</strong> Materials 2.5EMT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-Maj<strong>or</strong> 3.0ETE 242: Dig<strong>it</strong>al Electronicsf<strong>or</strong> Engineers 2.0EThird YearSem<strong>es</strong>ter 1CS 321: Control systemsEngineering I 3.0ECS 353: Micro<strong>co</strong>mputerSystems I 2.0EDP 311: Electrical Machin<strong>es</strong>I 3.0EUn<strong>it</strong>sDP 313: Power Electronics I 2.0EDP 321: High VoltageEngineering I 2.0EDP 331: Electrical PowerPlants 2.0EDP 341: Electrical PowerSystem Analys<strong>is</strong> I 2.0ETE 341: Analogue Electronicsf<strong>or</strong> Engineers I 4.0EElectiv<strong>es</strong> (minimum) 2.0ESem<strong>es</strong>ter 2CS 322: Control SystemsEngineering II 3.0ECS 354: Micro<strong>co</strong>mputerSystems II 2.0EDP 312: Electrical Machin<strong>es</strong> II 3.0EDP 322: High VoltageEngineering II 2.0EDP 342: Electrical PowerSystem Analys<strong>is</strong>II 2.0ETE 342: Dig<strong>it</strong>al Electronics f<strong>or</strong>Engineers I 4.0EElectiv<strong>es</strong> (minimum) 2.0EElectiv<strong>es</strong> (Minimum 2.0 Un<strong>it</strong>s)CS 334: Operating Systems 3.0EDP 314: Power Electronics II 2.0ETE 311: AnalogueTele<strong>co</strong>mmunicationsI 3.0ETE 312: Dig<strong>it</strong>alTele<strong>co</strong>mmunicationsI 3.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sDP 411: Electrical Machine III 3.0EDP 471: Electrical Safety &Maintenance 2.0EDP 498: Final Project I 2.0EElectiv<strong>es</strong> (minimum)7.0ESem<strong>es</strong>ter 2Un<strong>it</strong>sTM 400: Engineering Ethicsand Pr<strong>of</strong><strong>es</strong>sionalConduct 1.0EDP 499: Final Project II 4.0EMG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0EElectiv<strong>es</strong> (minimum)4.0EElectiv<strong>es</strong> (Minimum 11.0 Un<strong>it</strong>s)CS 421: Control SystemsEngineering III 2.0EDP 470: Solar Electric<strong>it</strong>y 3.0EDP 472: D<strong>es</strong>ign <strong>of</strong> SinglePhase Machin<strong>es</strong> 3.0EMG 440: Engineering E<strong>co</strong>nomics 2.0EMG 441: Human R<strong>es</strong>ourc<strong>es</strong>Management 2.0ETE 411: AnalogueTele<strong>co</strong>mmunicationsII 3.0ETE 412: Dig<strong>it</strong>alTele<strong>co</strong>mmunicationsII 3.0ETE 441: Analogue Electronicsf<strong>or</strong> Engineers II 3.0E

368 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)BACHELOR OF SCIENCEIN ELECTRICAL POWERENGINEERINGSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCS 211: Measurements &InstrumentationEngineering I 3.0ECS 231: Computer Programmingin C 2.0EDP 271: Electrical Netw<strong>or</strong>kAnalys<strong>is</strong> I 3.0EUn<strong>it</strong>sDP 273: EngineeringElectromagneticsI 2.0EME 206: Strength <strong>of</strong> MaterialsII 3.0EME 215: Properti<strong>es</strong> <strong>of</strong> ElectricalMaterials 1.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0ETE 241: AnalogueElectronics f<strong>or</strong>Engineers I 2.0ESem<strong>es</strong>ter 2CS 212: Measurements &InstrumentationEngineering II 3.0ECS 251: Introduction toComputer Engineering 3.0ECS 232: Introduction toObject-<strong>or</strong>ientedProgramming 2.0EDP 272: Electrical Netw<strong>or</strong>kAnalys<strong>is</strong> II 3.0EDP 274: EngineeringElectromagneticsII 2.0EME 207: Mechanics <strong>of</strong>Machin<strong>es</strong> 2.0EME 216: Class<strong>if</strong>ication andT<strong>es</strong>ting <strong>of</strong> Materials 2.5EMT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0ETE 242: Dig<strong>it</strong>al Electronics f<strong>or</strong>Engineers 2.0EThird YearSem<strong>es</strong>ter 1CS 321: Control SystemsEngineering I 3.0EUn<strong>it</strong>sDP 311: Electrical Machin<strong>es</strong>I 3.0EDP 313: Power ElectronicsI 2.0EDP 321: High VoltageEngineering I 2.0EDP 331: Electrical PowerPlants 2.0EDP 341: Electrical PowerSystem Analys<strong>is</strong> I 2.0EElectiv<strong>es</strong> (minimum)7.0ESem<strong>es</strong>ter 2CS 322: Control SystemsEngineering II 3.0EDP 312: Electrical Machin<strong>es</strong>II 3.0EDP 314: Power Electronics II 2.0EDP 322: High VoltageEngineering II 2.0EDP 332: Electrical PowerD<strong>is</strong>tribution 3.0EDP 342: Electrical PowerSystem Analys<strong>is</strong> II 2.0EElectiv<strong>es</strong> (minimum)7.0E

369 Prospectus f<strong>or</strong> the Year 2005/2006Electiv<strong>es</strong> (Minimum 7.0 Un<strong>it</strong>s)CS 333: Computer Hardware 2.0ECS 334: Operating Systems 3.0ECS 353: Micro<strong>co</strong>mputerSystems I 2.0ECS 354: Micro<strong>co</strong>mputerSystems II 2.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCS 421: Control SystemsEngineering III 2.0EDP 411: Electrical Machin<strong>es</strong>III 3.0EUn<strong>it</strong>sDP 421: Electrical InsulatingMaterials 1.0EDP 442: Power SystemDynamics &Control 3.0EDP 471: Electrical Safety &Maintenance 2.0EDP 498: Final Project I 2.0EElectiv<strong>es</strong> (minimum)7.0ESem<strong>es</strong>ter 2TM 400: Engineering Ethicsand Pr<strong>of</strong><strong>es</strong>sionalConduct 1.0EDP 412: D<strong>es</strong>ign <strong>of</strong> ElectricalMachin<strong>es</strong> 2.0EDP 443: Sw<strong>it</strong>ch Gear &ProtectionEngineering 2.0EDP 499: Final Project II 4.0EMG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0EElectiv<strong>es</strong> (minimum)7.0EElectiv<strong>es</strong> (Minimum 3.0 Un<strong>it</strong>s)CS 453: Micro<strong>co</strong>mputer SystemsIII 1.0ECS 454: Micro<strong>co</strong>mputer SystemsIV 1.0EDP 470: Solar Electric<strong>it</strong>y 3.0EDP 472: D<strong>es</strong>ign <strong>of</strong> SinglePhase Machin<strong>es</strong> 3.0EMG 440: EngineeringE<strong>co</strong>nomics 2.0EMG 441: Human R<strong>es</strong>ourc<strong>es</strong>Management 2.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)BACHELOR OF SCIENCE INTELECOMMUNICATIONSENGINEERINGSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCS 211: Measurements &InstrumentationEngineering I 3.0EUn<strong>it</strong>sCS 231: Computer Programmingin C 2.0EDP 271: Electrical Netw<strong>or</strong>kAnalys<strong>is</strong> I 3.0EDP 273: EngineeringElectromagnetics I 2.0EUn<strong>it</strong>sME 215: Structure andApplication <strong>of</strong>Electrical Materials 1.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0ETE 241: Electronic Circu<strong>it</strong>sf<strong>or</strong> Engineers 3.0ESem<strong>es</strong>ter 2CS 212: Measurements &InstrumentationEngineering II 3.0ECS 251: Introduction toComputerEngineering 3.0ECS 232: Introduction to

370 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamObject-<strong>or</strong>ientedProgramming 2.0EDP 272: Electrical Netw<strong>or</strong>kAnalys<strong>is</strong> I 3.0EDP 274: EngineeringElectromagneticsII 2.0EMT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0ETE 242: Dig<strong>it</strong>al Electronicsf<strong>or</strong> Engineers 2.0ECS 242: Computer Netw<strong>or</strong>kingII 2.0EThird YearSem<strong>es</strong>ter 1CS 321: Control SystemsEngineering I 3.0EUn<strong>it</strong>sCS 353: Micro<strong>co</strong>mputerSystems I 2.0ETE 311: AnalogueTele<strong>co</strong>mmunicationsI 3.0ETE 341: Analogue Electronicsf<strong>or</strong> Engineers I 4.0EElectiv<strong>es</strong> (minimum)5.0ESem<strong>es</strong>ter 2CS 322: Control SystemsEngineering II 3.0ECS 354: Micro<strong>co</strong>mputerSystems II 2.0ETE 312: Dig<strong>it</strong>alTele<strong>co</strong>mmunicationsI 3.0ETE 342: Dig<strong>it</strong>al Electronicsf<strong>or</strong> Engineers I 4.0EElectiv<strong>es</strong> (minimum)5.0EElectiv<strong>es</strong> (Minimum 10.0 Un<strong>it</strong>s)CS 253: Computer Programmingf<strong>or</strong> Engineers II 2.0EDP 313: Power Electronics I 2.0EDP 314: Power Electronics II 2.0EDP 331: Electrical PowerPlants 2.0EDP 333: Introduction to PowerEngineering I 2.0EDP 334: Introduction to PowerEngineering II 2.0Eany Approved Course Modul<strong>es</strong> atUDSM (6 Un<strong>it</strong>s maximum f<strong>or</strong> theprogramme).3.0Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sDP 421: Electrical InsulatingMaterials 1.0EDP 471: Electrical Safety &Maintenance 2.0ETE 411: AnalogueTele<strong>co</strong>mmunicationsII 3.0ETE 441: Analogue Electronicsf<strong>or</strong> Engineers II 3.0EUn<strong>it</strong>sTE 498: Final Project I 2.0EElectiv<strong>es</strong> (minimum) 6.0Sem<strong>es</strong>ter 2TM 400: Engineering Ethicsand Pr<strong>of</strong><strong>es</strong>sionalConduct 1.0EMG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0ETE 412: Dig<strong>it</strong>alTele<strong>co</strong>mmunicationII 3.0ETE 442: Dig<strong>it</strong>al Electronics f<strong>or</strong>Engineers II 3.0ETE 499: Final Project II 4.0EElectiv<strong>es</strong> (minimum)1.0EElectiv<strong>es</strong> (Minimum 7.0 Un<strong>it</strong>s)CS 421: Control SystemsEngineering III 2.0ECS 452: Micro<strong>co</strong>mputerSystems III 2.0EMG 440:EngineeringE<strong>co</strong>nomics 2.0E

371 Prospectus f<strong>or</strong> the Year 2005/2006MG 441: Human R<strong>es</strong>ourc<strong>es</strong>Management 2.0ETE 471: Introduction to VLSI 3.0ETE 480: Dig<strong>it</strong>al SignalProc<strong>es</strong>sing (DSP) 2.0ETE 481: Telev<strong>is</strong>ionEngineering 2.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)FACULTY OF MECHANICAL ANDCHEMICAL ENGINEERINGBACHELOR OF SCIENCE INCHEMICAL AND PROCESSENGINEERINGSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCP 201: Materials and EnergyBalance 3.0EUn<strong>it</strong>sCP 211: ChemicalEngineering FluidMechanics 3.0ECH 250: In<strong>or</strong>ganicChem<strong>is</strong>try 3.0EME 206: Strength <strong>of</strong>Materials II 3.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0ESem<strong>es</strong>ter 2CH 240: Physical Chem<strong>is</strong>try 3.0ECH 260: Organic Chem<strong>is</strong>try 3.0ECP 208: Computer Applicationin ChemicalEngineering I 3.0CP 270: Chemical EngineeringLab<strong>or</strong>at<strong>or</strong>y I 2.0ME 207: Mechanics <strong>of</strong>Machin<strong>es</strong> 2.0EME 212: Deteri<strong>or</strong>ation <strong>of</strong>Materials in Service 1.0EME 216: Class<strong>if</strong>ication <strong>of</strong>Materials and T<strong>es</strong>ting 2.5EMT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0EThird YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCP 302: Un<strong>it</strong> OperationsI 3.0ECP 303: Chemical EngineeringThermodynamics 3.0ECP 305: Proc<strong>es</strong>s Engineeringand D<strong>es</strong>ign I 4.0ECP 308: Computer Application inChemical EngineeringII 3.0Electiv<strong>es</strong> (minimum) 5.0Sem<strong>es</strong>ter 2CP 304: Heat and MassTransfer 3.0EUn<strong>it</strong>sCP 307: Chemical ReactionEngineering 3.0ECP 315: Chemical EngineeringLab<strong>or</strong>at<strong>or</strong>y II 1.0TM 330: General EngineeringProcedur<strong>es</strong> 2.0MG 340: Engineering OperationsManagement I 2.0EElectiv<strong>es</strong> (minimum) 6.0Electiv<strong>es</strong> (Minimum 11 Un<strong>it</strong>s)CP 371: Industrial OrganicChem<strong>is</strong>try 1.5CP 372: Biochemical EngineeringPrincipl<strong>es</strong> 1.5CP 373: Proc<strong>es</strong>s and PlantD<strong>es</strong>ign f<strong>or</strong> Food andBiochemical Products 1.5CP 374: D<strong>es</strong>ign <strong>of</strong> Experiments 1.5CP 375: Proc<strong>es</strong>s Plant

372 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamTechnology 2.5ECP 376: Paper Technology 2.5CP 377: Pulping Technology 2.5MM 373: Electrometallurgy 2.0MM 342: Oil and Gas Mining 2.0CP 357: Fuel Chem<strong>is</strong>try andTechnology 2.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme).Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCP 402: Un<strong>it</strong> Operations II 3.0ECP 405: Proc<strong>es</strong>s Engineeringand D<strong>es</strong>ign II 3.0CP 410: Elements <strong>of</strong>EnvironmentalEngineering 3.0ECP 498: Final Project I 2.0MG440: Engineering E<strong>co</strong>nomic 2.0EUn<strong>it</strong>sMG 441: Human R<strong>es</strong>ourceManagement 2.0EMG 443: Industrial Safety andMaintenance 2.0EElectiv<strong>es</strong> (minimum) 3.0Sem<strong>es</strong>ter 2CP 406: Proc<strong>es</strong>s Dynamics andControl 3.0ECP 415: Chemical EngineeringLab<strong>or</strong>at<strong>or</strong>y III 1.0TM 400: Engineering Ethics andPr<strong>of</strong><strong>es</strong>sional Conduct 1.0MG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0ECP 499: Final project II 4.0Electiv<strong>es</strong> (minimum) 8.0Electiv<strong>es</strong> (Minimum 11 Un<strong>it</strong>s)CP 471: EnvironmentalManagement andCleaner Technology 1.5CP 472: Biological Treatment<strong>of</strong> Industrial Wast<strong>es</strong> 1.5CP 473: Chemical Proc<strong>es</strong>sHazards and R<strong>is</strong>kAnalys<strong>is</strong> 1.5CP 474: R<strong>is</strong>k Ass<strong>es</strong>smentTechniqu<strong>es</strong> 1.5CP 475: Gas-Solid SeparationEquipment 1.5CP 476: Micro<strong>co</strong>mputers inProc<strong>es</strong>s Industry 1.5CP 477: Introduction toComputerAided Proc<strong>es</strong>s D<strong>es</strong>ign 1.5CP 478: Proc<strong>es</strong>s Modelling 1.5CP 479: MathematicalMethods in ChemicalEngineering 1.5MM 478: Natural Gas 2.5EN 438: Refrigeration and AirCond<strong>it</strong>ioning 3.0EUn<strong>it</strong>sEN 434: Renewable EnergyTechnologi<strong>es</strong> 3.0EME 417: Compos<strong>it</strong>e Materials 2.0PD 416: Polymer Engineering 3.0CH 360: EnvironmentalAnalytical Chem<strong>is</strong>try 2.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)BACHELOR OF SCIENCEIN ELECTROMECHANICALENGINEERINGSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sEN 228: Fluid Mechanics I 3.0EDP 271: Electrical Netw<strong>or</strong>kAnalys<strong>is</strong> I 3.0EDP 273: Engineering

373 Prospectus f<strong>or</strong> the Year 2005/2006Electromagnetics I 2.0EME 206: Strength <strong>of</strong>Materials II 3.0EME 215: Structure andApplication <strong>of</strong>Electrical Materials 1.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0EPD 201: D<strong>es</strong>ign Methodology 2.0ETE 241: Electronic Circu<strong>it</strong>sf<strong>or</strong> Engineers 3.0ESem<strong>es</strong>ter 2EN 226: Thermodynamics I 3.0EEN 270: Practicals inTherm<strong>of</strong>luids 1.0DP 272: Electrical Netw<strong>or</strong>kAnalys<strong>is</strong> II 3.0EME 208: Dynamics 2.0EME 216: Class<strong>if</strong>ication <strong>of</strong>Materials and T<strong>es</strong>ting 2.5EUn<strong>it</strong>sMT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0EPD 202: Machine Elements I 3.0EPD 252: Industrial D<strong>es</strong>ignEngineering I 2.0EThird YearSem<strong>es</strong>ter 1EN 329: Internal CombustionEngin<strong>es</strong> 2.0EDP 311: Electrical Machin<strong>es</strong> I 3.0EDP 313: Power Electronics I 2.0EMG 340: EngineeringOperationsManagement I 2.0PD 211: Principl<strong>es</strong> <strong>of</strong> MetalCutting and MetalF<strong>or</strong>ming 2.0EPD 302: Machine ElementsII 3.0EPD 305: D<strong>es</strong>ign Project I 1.0TE 341: Analogue Electronicsf<strong>or</strong> Engineers I 4.0EElectiv<strong>es</strong> (minimum)4.0Sem<strong>es</strong>ter 2EN 370: Practicals in HeatEngin<strong>es</strong> 1.0DP 312: Electrical Machin<strong>es</strong> II 3.0EDP 314: Power Electronics II 2.0EMG 341: Engineering OperationsManagement II 2.0PD 212: ManufacturingTechnology I 3.0PD 306: D<strong>es</strong>ign Project II 1.0PD 308: Mechanical Vibrations 2.5TE 342: Dig<strong>it</strong>al Electronics f<strong>or</strong>Engineers I 4.0EElectiv<strong>es</strong> (minimum) 3.0Electiv<strong>es</strong> (Minimum <strong>of</strong> 7 hours)Un<strong>it</strong>sCS 353: Micro<strong>co</strong>mputerSystems I 2.0ECS 354: Micro<strong>co</strong>mputerSystems II 2.0EEN 326: Thermodynamics II 2.0EEN 335: Turbomachinery 2.0EPD 303: Computer AidedD<strong>es</strong>ign 2.0EPD 313: Casting 2.0EPD 331: Automation <strong>of</strong>Manufacturing 3.0EPD 352: Industrial D<strong>es</strong>ignEngineering II 2.5EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)Fourth YearSem<strong>es</strong>ter 1EN 437: Mechanical SystemsUn<strong>it</strong>s

374 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamControl 2.0EMG 440: EngineeringE<strong>co</strong>nomics 2.0MG 443: Industrial Safetyand Maintenance 2.0Electiv<strong>es</strong> (minimum)3.0Sem<strong>es</strong>ter 2TM 400: Engineering Ethicsand Pr<strong>of</strong><strong>es</strong>sionalConduct 1.0MG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0PD 499: Final Project 6.0Electiv<strong>es</strong> (minimum)0.0Electiv<strong>es</strong> (Minimum 3.0 Un<strong>it</strong>s)DP 412: D<strong>es</strong>ign <strong>of</strong> ElectricalMachin<strong>es</strong> 2.0EEN 435: AutomotiveEngineering 3.0EEN 438: Refrigeration andAir-<strong>co</strong>nd<strong>it</strong>ioning 2.0EUn<strong>it</strong>sME 417: Compos<strong>it</strong>e Materials 2.0MG 441: Human R<strong>es</strong>ourceManagement 2.0PD 312: ManufacturingTechnology II 2.0EPD 408: No<strong>is</strong>e and VibrationControl 2.0EPD 431: Robotics 2.0ETE 442: Dig<strong>it</strong>al Electronics f<strong>or</strong>Engineers II 3.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)BACHELOR OF SCIENCE INFOOD AND BIOCHEMICALENGINEERINGSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCH 240: Physical Chem<strong>is</strong>try 3.0ECP 201: Materials andEnergy Balance 3.0ECP 211: Chemical EngineeringFluid Mechanics 3.0EFB 202: Food andBiochemical Proc<strong>es</strong>sEngineering I 3.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0EMC 111: Fundamentals <strong>of</strong>Microbiology 2.0ESem<strong>es</strong>ter 2FB 215: Food and BiochemicalEngineering Lab<strong>or</strong>at<strong>or</strong>yI 2.0MC 210: Applied FoodMicrobiology 2.0EME 216: Class<strong>if</strong>ication <strong>of</strong>Materialsand T<strong>es</strong>ting 2.5EUn<strong>it</strong>sCH 260: Organic Chem<strong>is</strong>try 3.0ECP 303: Chemical EngineeringThermodynamics 3.0EFB 203: Basic Principl<strong>es</strong> <strong>of</strong>BiochemicalEngineering 3.0EMT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0EThird YearSem<strong>es</strong>ter 1FB 302: Food and BiochemicalProc<strong>es</strong>s Engineering II 3.0ECP 302: Un<strong>it</strong> Operations I 3.0ECP 305: Proc<strong>es</strong>s Engineeringand D<strong>es</strong>ign I 4.0ECP 308: Computer Applicationin Chemical EngineeringII 3.0MG 340: Engineering OperationsManagement I 2.0ESem<strong>es</strong>ter 2FB 315: Food and BiochemicalEngineering Lab<strong>or</strong>at<strong>or</strong>yII 1.0

375 Prospectus f<strong>or</strong> the Year 2005/2006TM 330: General EngineeringProcedur<strong>es</strong> 2.0FB 301: EngineeringProperti<strong>es</strong> <strong>of</strong> Foods 2.5ECP 304: Heat and MassTransfer 3.0EFB 307: Food and BiochemicalReaction Engineering 3.0EElectiv<strong>es</strong> (Minimum 6 Un<strong>it</strong>s)FB 373: Dairy Proc<strong>es</strong>singTechnology 1.5CP 371: Industrial OrganicChem<strong>is</strong>try 1.5CP 374: Experimental D<strong>es</strong>ign 1.5FB 372: Fru<strong>it</strong>s and VegetableProc<strong>es</strong>sing Technology 1.5Un<strong>it</strong>sFB 375: Energy R<strong>es</strong>ourc<strong>es</strong>,Conversion andUtilization in FoodIndustry 2.0FB 371: BiochemicalEngineering Principl<strong>es</strong><strong>of</strong> Fermentation 2.5FB 498: Final Project I 2.0MG 440: Engineering E<strong>co</strong>nomics 2.0ESem<strong>es</strong>ter 2TM 400: Engineering Ethics andPr<strong>of</strong><strong>es</strong>sional Conduct 1.0FB 415: Food and BiochemicalEngineering Lab<strong>or</strong>at<strong>or</strong>yIII 1.0MG 441: Human R<strong>es</strong>ourceManagement 2.0ECP 406: Proc<strong>es</strong>s Dynamics andControl 3.0EMG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0FB 499: Final Project II 4.0Electiv<strong>es</strong>(Minimum 6 Un<strong>it</strong>s)Any Approved Course Modul<strong>es</strong> atUDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCP 402: Un<strong>it</strong> Operations II 3.0EFB 410: EnvironmentalProtection andIndustrial Hygiene 3.0EFB 441: Qual<strong>it</strong>y Control inFood and BiochemicalProducts 2.0EFB 442: Food and BiochemicalEngineering D<strong>es</strong>ign andSan<strong>it</strong>ation 3.0E

376 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamUn<strong>it</strong>sFB 473: Cereals and OilseedsProc<strong>es</strong>singTechnology 1.0FB 475: Instrumental andAnalytical Methods 2.0FB 478: Modeling <strong>of</strong>Bioproc<strong>es</strong>s<strong>es</strong> 2.0CP 473: Chemical Proc<strong>es</strong>sHazards and R<strong>is</strong>kAnalys<strong>is</strong> 1.5CP 474: R<strong>is</strong>k Ass<strong>es</strong>smentTechniqu<strong>es</strong> 1.5CP 475: Gas-Solid SeparationEquipment 1.5CP 477: Introduction toComputer AidedProc<strong>es</strong>s D<strong>es</strong>ign 1.5CP 479: Mathematical Methodsin Chemical Engineering 1.5FB 474: Sugar Technology 1.0CP 471: EnvironmentalManagement and CleanerTechnology 1.5FB 476: New Developments inFood and BiochemicalEngineering 2.0Any Approved Course Modul<strong>es</strong> atUDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)BACHELOR OF SCIENCE ININDUSRIAL ENGINEERING ANDMANAGEMENTSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sMG 201: D<strong>es</strong>ign <strong>of</strong> W<strong>or</strong>kMethods I2EMG 220: Project Management 2EPD 201: D<strong>es</strong>ign Methodology 2ECS 231: Computer Programmingin C2EUn<strong>it</strong>sMT 261: Several VariableCalculus f<strong>or</strong>Non-maj<strong>or</strong>s3EMG 255: Inf<strong>or</strong>mation Technology 1 2EUn<strong>it</strong>sMG 202: D<strong>es</strong>ign <strong>of</strong> W<strong>or</strong>k MethodsII2EMG 261: D<strong>es</strong>ign <strong>of</strong> Products/Servic<strong>es</strong> I2EME 206: Strength <strong>of</strong> Material II 3ESem<strong>es</strong>ter 2PD 252: Industrial D<strong>es</strong>ignEngineering I2EMT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-maj<strong>or</strong>s 3EMG 232: Industrial Psychology2ECS 232: Introduction to ObjectOriented Programming 2EN 226; Thermodynamics I 3EMG 256: Inf<strong>or</strong>mation TechnologyII2EMG 262: D<strong>es</strong>ign <strong>of</strong> Products/Servic<strong>es</strong> II2EMG 245: Log<strong>is</strong>tics I2EThird YearSem<strong>es</strong>ter 1PD 352: Industrial D<strong>es</strong>ignEngineering II 2.5EMG 340: EngineeringOperations ManagementI2EEN 326: Thermodynamics II 2EMG 360: Productiv<strong>it</strong>yImprovement2EMG 365: Simulation <strong>of</strong>Management Systems I 2EMG 370: Change Management 2EMG 346: Log<strong>is</strong>tics II2ESem<strong>es</strong>ter 2MG 355: Project Appra<strong>is</strong>alMG 341: EngineeringOperations ManagementIIPD 353: ErgonomicsMG 361: Proc<strong>es</strong>s Improvement2E2E2E3E

377 Prospectus f<strong>or</strong> the Year 2005/2006EN 339: Industrial EnergyManagementMG 366: Simulation <strong>of</strong>Management Systems IIElectiv<strong>es</strong>Fourth Year2EUn<strong>it</strong>s2E3ESem<strong>es</strong>ter 1MG 441: Human R<strong>es</strong>ourceManagement2EMG 440: Engineering E<strong>co</strong>nomics 2EMG 442: Operations R<strong>es</strong>earch I 2EMG 443: Industrial Safetyand Maintenance 2EMG 445: Entrepreneurship f<strong>or</strong>Engineers3EElectiv<strong>es</strong> 5Sem<strong>es</strong>ter 2TM 400: Engineering Ethics andPr<strong>of</strong><strong>es</strong>sional Conduct 1EMG 444: Operations R<strong>es</strong>earch II 2EPD 441: Manufacturing Systems 2EMG 447: Systemic Panagement 2EMG 499: Final Project 6Electiv<strong>es</strong> f<strong>or</strong> Third and FourthYearsSem<strong>es</strong>ter 1PD 431: Automation andRobotics3EAny approved <strong>co</strong>urse modul<strong>es</strong> at UDSM– Maximum 6 un<strong>it</strong>s 5Sem<strong>es</strong>ter 2MG 344: ManagementIntervention MethodsMG 446: Selected Topics inIndustrial EngineeringUn<strong>it</strong>s2E2EAny approved <strong>co</strong>urse modul<strong>es</strong> at UDSM– Maximum 6 un<strong>it</strong>s 6BACHELOR OF SCIENCE INMECHANICAL ENGINEERINGMechanical (General Stream)Se<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sDP 211: Fundamentals inElectrical Machin<strong>es</strong> &Power Systems 3.0EEN 228: Fluid Mechanics I 3.0EME 206: Strength <strong>of</strong> MaterialsII 3.0EME 211: Metals and Non MetallicMaterials 3.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0PD 201: D<strong>es</strong>ign Methodology 2.0ESem<strong>es</strong>ter 2EN 226: Thermodynamics I 3.0EEN 270: Practicals in ThermoFluids 1.0ME 208: Dynamics 2.0EME 212: Deteri<strong>or</strong>ation <strong>of</strong>Materials 1.0EME 270: Materials TechnologyPracticals II 0.5MT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0PD 202: Machine Elements I 3.0EPD 252: Industrial D<strong>es</strong>ignEngineering I 2.0ETE 171: Introduction toElectronicsEngineering 3.0EThird Year

378 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamSem<strong>es</strong>ter 1EN 326: Thermodynamics II 2.0EUn<strong>it</strong>sEN 329: Internal CombustionEngin<strong>es</strong> 2.0EEN 335: Turbomachinery 2.0EMG 340: Engineering OperationsManagement I 2.0PD 211: Principl<strong>es</strong> <strong>of</strong> MetalCutting and MetalF<strong>or</strong>ming 2.0EPD 302: Machine Elements II 3.0EPD 305: D<strong>es</strong>ign Project I 1.0PD 352: Industrial D<strong>es</strong>ignEngineering I 2.5EElectiv<strong>es</strong> (minimum) 0.0Sem<strong>es</strong>ter 2EN 370: Practical in HeatEngin<strong>es</strong> 1.0MG 341: Engineering OperationsManagement II 2.0ME 306: Solid Mechanics 3.0EPD 212: ManufacturingTechnology I 3.0EPD 306: D<strong>es</strong>ign Project II 1.0PD 308: Mechanical Vibrations 2.5EPD 370: Practical in ProductionEngineering 1 1.0EElectiv<strong>es</strong> (minimum) 4.0Electiv<strong>es</strong> (Minimum 4.0 Un<strong>it</strong>s)EN 328: Fluid Mechanics II 3.0EEN 339: Industrial EnergyManagement 2.0EPD 303: Computer AidedD<strong>es</strong>ign 2.0PD 309: Dynamics <strong>of</strong> RotatingMachin<strong>es</strong> 2.0PD 313: Casting 2.0PD 321: Machine Tools I 2.0PD 331: Automation <strong>of</strong>Manufacturing 3.0PD 332: Computer AidedManufacturing 2.0Un<strong>it</strong>sPD 361: Engineering Metrology 2.0Any Approved Course Modul<strong>es</strong> at UDSM(4 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sEN 437: Mechanical SystemsControl 2.0EMG 440: EngineeringE<strong>co</strong>nomics 2.0MG 441: Human R<strong>es</strong>ourceManagement 2.0MG 443: Industrial Safetyand Maintenance 2.0PD 312: ManufacturingTechnology II 2.0EPD 402: Material HandlingSystems 2.0EElectiv<strong>es</strong> (minimum) 3.0ESem<strong>es</strong>ter 2TM 400: Engineering Ethics andPr<strong>of</strong><strong>es</strong>sional Conduct 1.0MG 442: Operations R<strong>es</strong>earch 2.0MG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0PD 499: Final Project 6.0Electiv<strong>es</strong> (minimum) 3.0Electiv<strong>es</strong>(Minimum 8.0 Un<strong>it</strong>s)EN 434: Renewable EnergyTechnologi<strong>es</strong> 3.0EEN 435: Automotive Engineering 3.0EEN 438: Refrigeration and AirCond<strong>it</strong>ioning 3.0EME 406: Fin<strong>it</strong>e ElementsMethod 2.0ME 416: Welding Metallurgy 2.0ME 417: Compos<strong>it</strong>e Materials 2.0PD 408: No<strong>is</strong>e and Vibration

379 Prospectus f<strong>or</strong> the Year 2005/2006Control 2.0EUn<strong>it</strong>sPD 416: Polymer Engineering 3.0EPD 451: Ergonomics 2.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)M E C H A N I C A L ( E N E R G YSTREAM)Se<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sEN 228: Fluid Mechanics I 3.0EDP 211: Fundamentals inElectrical Machin<strong>es</strong> &Power Systems 3.0EME 206: Strength <strong>of</strong> Materials II 3.0EME 211: Metals and Non-Metallic Materials 3.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0EPD 201: D<strong>es</strong>ign Methodology 2.0ESem<strong>es</strong>ter 2EN 226: Thermodynamics I 3.0EEN 270: Practicals in ThermoFluids 1.0ME 208: Dynamics 2.0EME 212: Deteri<strong>or</strong>ation <strong>of</strong>Materials 1.0EME 270: Materials TechnologyPracticals II 0.5MT 271: Stat<strong>is</strong>tics f<strong>or</strong> Non-Maj<strong>or</strong>s 3.0PD 202: Machine Elements I 3.0EPD 252: Industrial D<strong>es</strong>ignEngineering I 2.0ETE 171: Introduction toElectronicsThird YearEngineering 3.0ESem<strong>es</strong>ter 1Un<strong>it</strong>sEN 326: Thermodynamics II 2.0EEN 328: Fluid Mechanics II 3.0EEN 329: Internal CombustionEngin<strong>es</strong> 2.0EEN 333: Pumps and Turbin<strong>es</strong> 3.0EMG 340: EngineeringOperationsManagement I 2.0EPD 211: Principl<strong>es</strong> <strong>of</strong> MetalCutting and MetalF<strong>or</strong>ming 2.0EPD 302: Machine Elements II 3.0EPD 305: D<strong>es</strong>ign project I 1.0Electiv<strong>es</strong> (minimum) 1.0Sem<strong>es</strong>ter 2EN 339: Industrial EnergyManagement 2.0EEN 370: Practicals in HeatEngin<strong>es</strong> 1.0MG 341: EngineeringOperations ManagementII 2.0EPD 212: ManufacturingTechnology I 3.0EPD 306: D<strong>es</strong>ign Project II 1.0Electiv<strong>es</strong> (minimum) 9.0Electiv<strong>es</strong> (Minimum 10.0 Un<strong>it</strong>s)EN 338: Computer Applicationsin Energy Engineering3.0EME 306: Solid Mechanics 3.0EPD 303: Computer Aided D<strong>es</strong>ign 2.0PD 308: Mechanical Vibrations 2.5EPD 309: Dynamics <strong>of</strong> RotatingMachin<strong>es</strong> 2.0EPD 313: Casting 2.0E

380 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamPD 352: Industrial D<strong>es</strong>ignEngineering II 2.5EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sEN 432: Energy ConversionTechnologi<strong>es</strong> 2.0EEN 434: Renewable EnergyTechnologi<strong>es</strong> 3.0EEN 437: Mechanical SystemsControl 2.0EMG 440: Engineering E<strong>co</strong>nomics 2.0EMG 441: Human R<strong>es</strong>ourceManagement 2.0EMG 443: Industrial Safety andMaintenance 2.0EElectiv<strong>es</strong> (minimum) 2.0Sem<strong>es</strong>ter 2TM 400: Engineering Ethics andPr<strong>of</strong><strong>es</strong>sional Conduct 1.0EEN 436: Power Plants 2.0EEN 438: Refrigeration and AirCond<strong>it</strong>ioning 3.0EEN 499: Final Project 6.0MG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0Electiv<strong>es</strong> (minimum) 0.0Electiv<strong>es</strong> (Minimum 7.0 Un<strong>it</strong>s)EN 435: Automotive Engineering 3.0EME 417: Compos<strong>it</strong>e Materials 2.0EMG 442: Operations R<strong>es</strong>earch 2.0PD 312: Manufacturing TechnologyII 2.0EPD 402: Material HandlingSystems 2.0EPD 408: No<strong>is</strong>e and VibrationControl 2.0EPD 416: Polymer Engineering 3.0EPD 451: Ergonomics 2.0EAny Approved Course Modul<strong>es</strong> at UDSM(6 Un<strong>it</strong>s maximum f<strong>or</strong> the programme)BACHELOR OF SCIENCEIN MINERAL PROCESSINGENGINEERINGSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sCH 250: In<strong>or</strong>ganic Chem<strong>is</strong>try 3.0ECP 201: Materials and EnergyBalance 3.0EMM 251: Mineral Proc<strong>es</strong>sing I 3.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0ECP 211: Chemical EngineeringFluid Mechanics 3.0ECH 240: Physical Chem<strong>is</strong>try 3.0ESem<strong>es</strong>ter 2MM 202: Introduction to MiningEngineering 2.0EME 207: Mechanics <strong>of</strong>Machin<strong>es</strong> 2.0EME 212: Deteri<strong>or</strong>ation <strong>of</strong>Materials 1.0EME 216: Class<strong>if</strong>ication <strong>of</strong>Materials and T<strong>es</strong>ting 2.5ECH 271: Chemical Lab<strong>or</strong>at<strong>or</strong>yf<strong>or</strong> Mineral Proc<strong>es</strong>sing 1.5GY 364: Metallic MineralDepos<strong>it</strong>s and OreMicros<strong>co</strong>py 4.0EMT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0EThird YearSem<strong>es</strong>ter 1CP 303: Chemical Engineering

381 Prospectus f<strong>or</strong> the Year 2005/2006Thermodynamics 3.0EUn<strong>it</strong>sCP 305: Proc<strong>es</strong>s Engineering andD<strong>es</strong>ign I 4.0EMG 340: Engineering OperationsManagement I 2.0EMM 301:Mine Transp<strong>or</strong>tation andMaterials Handling 2.0EMM 315:Computer Applicationsin Mining 3.0Sem<strong>es</strong>ter 2MG 341: Engineering OperationsManagement II 2.0EMM 312: Mineral Proc<strong>es</strong>singTechniqu<strong>es</strong> I 3.0EMM 355: Mineral Proc<strong>es</strong>singLab<strong>or</strong>at<strong>or</strong>y I 2.0MM 358: Pyrometallurgy 2.0ECP 307: Chemical ReactionEngineering 3.0EElectiv<strong>es</strong> (Minimum 9.0 Un<strong>it</strong>s)Any Approved Course Modul<strong>es</strong> atUDSM(6 Un<strong>it</strong>s maximum per programme fromoutside <strong>CoET</strong>)Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sMM 410: EnvironmentalEngineering f<strong>or</strong>Mining 3.0EGY 402: Industrial MineralDepos<strong>it</strong>s and FossilFuels 2.0EMG 440: EngineeringE<strong>co</strong>nomics 2.0EMM 401: Safety Engineeringand Mine R<strong>es</strong>cue 2.0EMM 404: Mine Cost Engineering 1.0EMM 498: Final Project I 2.0Sem<strong>es</strong>ter 2CP 406: Proc<strong>es</strong>s Dynamics andControl 3.0EUn<strong>it</strong>sEG 400: Engineering Ethics andPr<strong>of</strong><strong>es</strong>sional Conduct 1.0EMG 445: Entrepreneurship f<strong>or</strong>Engineers3.0EMM 455: Mineral Proc<strong>es</strong>singLab<strong>or</strong>at<strong>or</strong>y II 2.0MM 460: D<strong>es</strong>ign and Operation <strong>of</strong>Mineral Proc<strong>es</strong>s<strong>es</strong> 2.0EMM 499: Final Project II 4.0Electiv<strong>es</strong> (Minimum 9.0 Un<strong>it</strong>s)Any Approved Course Modul<strong>es</strong> atUDSM(6 Un<strong>it</strong>s maximum per programme fromoutside <strong>CoET</strong>)Elective Cours<strong>es</strong>Un<strong>it</strong>sMM 341: Coal Mining 2.0MM 342: Oil and Gas Mining 2.0MM 343: Geostat<strong>is</strong>tics 2.0MM 345: Gemology 2.0MM 347: Small-ScaleMining Techniqu<strong>es</strong> 2.0MM 371: MetallurgicalAc<strong>co</strong>unting 2.0MM 373: Electrometallurgy 2.0MM 445: Mining Machin<strong>es</strong>and Equipment 2.0MM 446: Introduction to MineD<strong>es</strong>ign 3.0MM 471: Coal Proc<strong>es</strong>sing 2.0MM 478: Gas Cond<strong>it</strong>ioning andProc<strong>es</strong>sing 2.0BACHELOR OF SCIENCE INMINING ENGINEERINGSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1GY 326: Introduction to

382 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamHydrogeology 2.0EMT 261: Several VariableCalculus f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0EUn<strong>it</strong>sSD 221: The<strong>or</strong>y <strong>of</strong> StaticallyDeterminateStructur<strong>es</strong> 3.0ETR 110: Surveying 4.0EWR 211: Fluid Mechanicsf<strong>or</strong> Civil Engineers 3.5EMM 251: Mineral Proc<strong>es</strong>sing I 3.0ESem<strong>es</strong>ter 2GY 364: Metallic MineralDepos<strong>it</strong>s and OreMicros<strong>co</strong>py 4.0EEN 226: Thermodynamics I 3.0EME 212: Deteri<strong>or</strong>ation <strong>of</strong>Materials 1.0EME 216: Class<strong>if</strong>ication <strong>of</strong>Materials and T<strong>es</strong>ting 2.5EMM 202: Introduction to MiningEngineering 2.0EMT 271: Stat<strong>is</strong>tics f<strong>or</strong>Non-Maj<strong>or</strong>s 3.0EThird YearSem<strong>es</strong>ter 1MG 340: Engineering OperationsManagement I 2.0EMM 301: Mine Transp<strong>or</strong>tationand MaterialsHandling 2.0EMM 310: Principl<strong>es</strong> andApplication<strong>of</strong> Explosiv<strong>es</strong> 2.0EMM 315: ComputerApplicationsin Mining 3.0MM 322: Mine Surveying 4.0ESem<strong>es</strong>ter 2MG 341: EngineeringOperationsManagement II 2.0EUn<strong>it</strong>sMM 304: Rock Mechanics 3.0EMM 312: Mineral Proc<strong>es</strong>singTechniqu<strong>es</strong> I 3.0EMM 321: Drilling and BlastingMethods 2.0EMM 330: Mining EngineeringLab<strong>or</strong>at<strong>or</strong>y I 2.0Electiv<strong>es</strong> (Minimum 9.0 Un<strong>it</strong>s)Any Approved Course Modul<strong>es</strong> atUDSM(6 Un<strong>it</strong>s maximum per programme fromoutside <strong>CoET</strong>)Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sMM 410: EnvironmentalEngineering inMining 3.0EGY 402: Industrial MineralDepos<strong>it</strong>s and FossilFuels 2.0EMG 440: EngineeringE<strong>co</strong>nomics 2.0EMM 401: Safety Engineeringand Mine R<strong>es</strong>cue 2.0EMM 404: Mine CostEngineering 1.0EMM 425: Open P<strong>it</strong> Mining 2.0EMM 498: Final Project I 2.0Sem<strong>es</strong>ter 2EG 400: Engineering Ethics andPr<strong>of</strong><strong>es</strong>sional Conduct 1.0EMG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0EMM 426: Underground P<strong>it</strong>Mining 2.0EMM 428: Mine Ventilation 2.0EMM 430: Mining Engineering

383 Prospectus f<strong>or</strong> the Year 2005/2006Lab<strong>or</strong>at<strong>or</strong>y II 2.0MM 499: Final Project II 4.0Electiv<strong>es</strong> (Minimum 8.0 Un<strong>it</strong>s)Any Approved Course Modul<strong>es</strong> atUDSM(6 Un<strong>it</strong>s maximum per programme fromoutside <strong>CoET</strong>)Elective Cours<strong>es</strong>MM 341: Coal Mining 2.0MM 342: Oil and Gas Mining 2.0MM 343: Geostat<strong>is</strong>tics 2.0MM 345: Gemology 2.0MM 347: Small-Scale MiningTechniqu<strong>es</strong> 2.0MM 371: MetallurgicalAc<strong>co</strong>unting 2.0MM 373: Electrometallurgy 2.0MM 445: Mining Machin<strong>es</strong> andEquipment 2.0MM 446: Introduction toMine D<strong>es</strong>ign 3.0MM 471: Coal Proc<strong>es</strong>sing 2.0MM 478: Gas Cond<strong>it</strong>ioning andProc<strong>es</strong>sing 2.0BACHELOR OF SCIENCE INPRODUCTION ENGINEERINGSe<strong>co</strong>nd YearSem<strong>es</strong>ter 1Un<strong>it</strong>sEN 228: Fluid Mechanics I 3.0ME 206: Strength <strong>of</strong> MaterialsII 3.0EME 211: Metals and Non-Metallic Materials 3.0EMT 261: Several VariableCalculus f<strong>or</strong> Non-Maj<strong>or</strong>s 3.0PD 201: D<strong>es</strong>ign Methodology 2.0EPD 211: Principl<strong>es</strong> <strong>of</strong> MetalCutting and MetalF<strong>or</strong>ming 2.0ETE 241: Electronic Circu<strong>it</strong> f<strong>or</strong>Engineers 3.0ESem<strong>es</strong>ter 2Un<strong>it</strong>sME 208: Dynamics 2.0EME 212: Deteri<strong>or</strong>ation <strong>of</strong>Materials in Service 1.0EME 270: Materials TechnologyPracticals II 0.5MT 271: Stat<strong>is</strong>tics f<strong>or</strong> Non-Maj<strong>or</strong>s 3.0PD 202: Machine Elements I 3.0EPD 212: ManufacturingTechnology I 3.0EPD 252: Industrial D<strong>es</strong>ignEngineering I 2.0EThird YearSem<strong>es</strong>ter 1MG 340: Engineering OperationsManagement I 2.0PD 302: Machine Elements II 3.0EPD 305: D<strong>es</strong>ign Project I 1.0EPD 312: ManufacturingTechnology II 2.0EPD 321: Machine Tools I 2.0EPD 352: Industrial D<strong>es</strong>ignEngineering II 2.5EPD 361: Engineering Metrology 2.0EElectiv<strong>es</strong> (minimum) 3.0Sem<strong>es</strong>ter 2MG 341: Engineering OperationsManagement II 2.0PD 306: D<strong>es</strong>ign Project II 1.0EPD 313: Casting 2.0EPD 331: Automation <strong>of</strong>Manufacturing 3.0EPD 332: Computer AidedManufacturing 2.0EPD 341: Manufacturing

384 Univers<strong>it</strong>y <strong>of</strong> <strong>Dar</strong> <strong>es</strong> SalaamSystem 3.0EPD 370: Practical in ProductionEngineering 1.0Electiv<strong>es</strong> (minimum) 3.0Un<strong>it</strong>sElectiv<strong>es</strong> (Minimum 3.0 Un<strong>it</strong>s)EN 226: Thermodynamics I 3.0PD 303: Computer Aided D<strong>es</strong>ign 2.0EPD 308: Mechanical vibrations 2.5EPD 311: Advanced Methods <strong>of</strong>Machining 2.0EPD 314: Foundry Engineering 2.5EPD 322: Machine Tools II 2.5EAny Approved Course Modul<strong>es</strong> at UDSM(A maximum total <strong>of</strong> 6 un<strong>it</strong>s in total perprogramme)Fourth YearSem<strong>es</strong>ter 1Un<strong>it</strong>sEN 437: Mechanical SystemsControl 2.0MG 440: Engineering E<strong>co</strong>nomics 2.0MG 441: Human r<strong>es</strong>ourceManagement 2.0MG 443: Industrial Safety andMaintenance 2.0PD 402: Material HandlingSystems 2.0EElectiv<strong>es</strong> (minimum) 6.0Sem<strong>es</strong>ter 2TM 400: Engineering Ethics andPr<strong>of</strong><strong>es</strong>sional Conduct 1.0MG 445: Entrepreneurship f<strong>or</strong>Engineers 3.0PD 416: Polymer Engineering 3.0EPD 451: Ergonomics 2.0EPD 499: Final Project 6.0Electiv<strong>es</strong> (minimum) 0.0Electiv<strong>es</strong> (Minimum 6.0 Un<strong>it</strong>s)ME 416: Welding Metallurgy 2.0ME 417: Compos<strong>it</strong>e Materials 2.0PD 408: No<strong>is</strong>e and VibrationControl 2.0EUn<strong>it</strong>sPD 415: Tool Engineering 2.0EPD 431: Robotics 2.0EAny Approved Course Modul<strong>es</strong> at UDSM(A maximum total <strong>of</strong> 6 un<strong>it</strong>s in total perprogramme)POSTGRADUATE STUDIESINTRODUCTIONThe <strong>CoET</strong> <strong>of</strong>fers postgraduate programm<strong>es</strong>leading to the award <strong>of</strong> PostgraduateDiploma in Engineering, Master <strong>of</strong> Sciencein Engineering and Doct<strong>or</strong> <strong>of</strong> Philosophy(Ph.D.) in maj<strong>or</strong> fields <strong>of</strong> Engineeringspecial<strong>is</strong>ation i.e. Chemical and Proc<strong>es</strong>sEngineering, Civil Engineering, ElectricalEngineering and Mechanical engineering.The degree <strong>of</strong> M.Sc. (Eng.) <strong>is</strong> <strong>of</strong>fered byCoursew<strong>or</strong>k and D<strong>is</strong>sertation mode <strong>or</strong>by th<strong>es</strong><strong>is</strong>. The Ph.D. degree <strong>is</strong> <strong>of</strong>fered byth<strong>es</strong><strong>is</strong>. In add<strong>it</strong>ion to the general univers<strong>it</strong>yregulations governing the award <strong>of</strong> higherdegre<strong>es</strong>, the following regulations shallapply during the trans<strong>it</strong>ion period topurely sem<strong>es</strong>ter<strong>is</strong>ed PG programm<strong>es</strong>.The Degree <strong>of</strong> Master <strong>of</strong> Science (Eng.)by Th<strong>es</strong><strong>is</strong>The <strong>CoET</strong> <strong>of</strong>fers a Master <strong>of</strong> Sciencein Engineering degree by R<strong>es</strong>earchand Th<strong>es</strong><strong>is</strong> in all the maj<strong>or</strong> fields <strong>of</strong>special<strong>is</strong>ation.1. Entrance Requirements1.1 The minimum qual<strong>if</strong>ication f<strong>or</strong>adm<strong>is</strong>sion to the programme <strong>is</strong>an Upper Se<strong>co</strong>nd class Bachel<strong>or</strong><strong>of</strong> Science degree in Chemical

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!