SIMOVERT Master Drives Einspeise-Einheit Bauform B und C ...

Definitionen 10.94CAUTIONElectrostatically Sensitive Devices (ESDs)The equipment contains electrostatically sensitive devices. These components may be destroyed very easilyby improper handling. Please observe the following notes if you nevertheless have to work with electronicmodules:Electronic modules should only be touched if absolutely necessary to carry out work on them.If modules nevertheless have to be touched, you must discharge your own body directly beforehand (this isbest done by touching an earthed conductive object such as the PE contact of a socket).Modules must not come into contact with highly insulating materials e.g. plastic films, insulating desktopsor synthetic fibre clothing items.Modules must only be placed on conductive surfaces.When soldering modules, the tip of the soldering iron must be earthed.Modules and components must only be stored or dispatched in conductive packaging (e.g. metallisedplastic boxes or metal tins).If packagings are not conductive, modules must be placed in a conductive envelopment prior to packaging.In this case, use can be made of conductive foam rubber or domestic aluminium foil, for example.The necessary protective measures for ESDs are elucidated once again in the following figure:a = conductive floor d = ESD coatb = ESD desk e = ESD armbandc = ESD shoes f = earthing terminal on cabinetsbddbdeef f fffacacaSitting position Standing position Standing / Sitting position0-6 ENGLISH Siemens AG 6SE7087-6AC85-0AA0Common Rectifier Operating instructions