Centro-Matic Lubrication System - Major Furnace Australia provides ...

Centro-Matic ® Automated Lubrication SystemsInjector AccessoriesInjector Connector TubePermits application of combined discharge of two or more Series SL-1, SL-41 orSL-44 injectors through one feed line. Used where bearing size is such that multipleinjector output is required. Fittings ¹⁄₈" NPT male each end. Carbon steel construction.Model For Injector Series Connections81646 SL1, SL41, SL44 ¹⁄₈" NPTF MaleInjector Outlet AdapterConverts individual injector lubricant outlet when standard ¹⁄₈" O.D. tube is notdesired. All adapters are carbon steel unless otherwise noted.Model For Injector Series Outlet Connections14988 ¹⁄₈" NPTF Female84200 ¹⁄₄" O.D. Tube14991 ¹⁄₈" NPTF Male249279* SL32, SL33, SL42, SL43 4 mm Tube249280* 6 mm Tube249281 4 mm Tube249282 6 mm Tube* Stainless steelManual Grease Fitting AdapterAllows manual lubrication of the machine between normal system cycles.Carbon steel with Nitrile seals.Model For Injector Series Outlet Connections84195 ¹⁄₈" O.D. TubeSL32, SL33, SL42, SL4384203¹⁄₄" O.D. TubeInjector Locking CapCarbon steel locking caps set injectors to fixed output.Model102781For Injector SeriesSL32, SL43SL33, SL42Fixed VolumeOutput.002 in 3 / .033 cc.003 in 3 / .049 ccInjector Cover CapsInjector cover caps are designed to protect the injector from dirt, harmful liquidsand fumes.Model Fits Injector Series Covers MaterialLength Diameterin mm in mm83272 SL1, SL44 Indicator 1.5 38.1 .69(ID) 17.583730 SL11 Stem Vinyl 2.0 50.8 1.125(ID) 28.668483 SL32, SL33, Measuring 1.25 31.2 .5(ID) 12.784825 SL42, SL43 Chamber Hard Lucite .61 15.5 .67(OD) 17.090537 SL1, SL41, SL44 Injector Body Aluminum 3.25 82.6 1.19(ID) 30.213