Centro-Matic Lubrication System - Major Furnace Australia provides ...

Centro-Matic ® Automated Lubrication SystemsSystem ControlsUse this guide to select accessories forModel 85500 System Sentry IIPressure Pressure Sensor Sensor WireFunction Switch Transducer Board Sensors #243100 (100')#69630 #247333 #250365 Note 2 Note 3SatelliteMonitor#85510Note 4Lube Controller1 Pump, 1 Zone Optional 1 Optional 1 — — — —Note 1Lube Controller, Required1 Pump, 1 per Zone Required 1 — — — —Up to 3 Zones (3 Max.)Lube Controller, Required 22 Pumps, 1 Zone No (1 per Pump) — — — —Per PumpLube Controller, Required Required 22 Pumps, Up to 2 1 per Zone (1 per Pump) — — — —Zones Per Pump (4 Max.)Lube Point Required Required RequiredMonitoring — — 1 per each 1 per Quantity —≤ 48 Points 16 Sensors Lube Point As NeededLube Point Required Required Required RequiredMonitoring — — 1 per each 1 per Quantity Quantity> 48 ≤ 1536 Points 16 Sensors Lube Point As Needed As NeededNote 1: Controller may be operated without a pressure switch or pressure transducer but will not beable to monitor and alarm for lube system pressure failures.Note 2: Sensors include 30' (9.1m) cable pigtail. Select brass/plated steel or stainless steel sensors instraight or 90° configuration as required.Note 3: Maximum distance between monitor and sensor is 500' (152 meters).Note 4: Satellite monitor includes one 250365 sensor board and accepts two additional boards(optional) for connection of up to 48 sensors per satellite. Maximum 31 satellites per system.37