Hydraulic catalogue - Normapress

Couplings to ISO 8434-1/DIN 2353Reinforcing ringsfor tubes124o.d. x thickness Bell code G1 G2 L6x1 8027 06 04 MS15-007/6X1 2,6 3,8 15,5 0,0088x1 8027 08 06 MS15-007/8X1 4,6 5,8 15,5 0,01310x1,5 8027 10 07 MS15-007/10X1,5 5,6 6,8 17 0,01710x1 8027 10 08 MS15-007/10X1 6,6 7,8 16,5 0,01912x1,5 8027 12 09 MS15-007/12X1,5 7,6 8,8 16,5 0,02212x1 8027 12 10 MS15-007/12X1 8,6 9,8 16,5 0,02315x1,5 8027 15 12 MS15-007/15X1,5 10,2 11,8 17 0,03915x1 8027 15 13 MS15-007/15X1 11,2 12,8 17 0,04118x1,5 8027 18 15 MS15-007/18X1,5 13,2 14,8 17,5 0,05218x1 8027 18 16 MS15-007/18X1 14,2 15,8 17,5 0,05820x1 8027 20 18 MS15-007/20X1 16,2 17,8 22 0,08022x1,5 8027 22 19 MS15-007/22X1,5 17,2 18,8 18 0,06928x2 8027 28 24 MS15-007/28X2 22,2 23,8 18 0,08828x1,5 8027 28 25 MS15-007/28X1,5 23,2 24,8 18 0,092Thin wall tube, generally used for low pressure, should be assembled using reinforcing rings in order to ensure reliable connection. Normally,this is also the case for nonferrous metal tubes, such as copper, brass and aluminium.AssemblyInsert a reinforcing ring into the tube up to the knurled collar. Drive thereinforcing ring completely in by means of a hammer (plastic or hardrubber). The knurled collar is then pressed into the inner wall of thetube and secures the reinforcing ring, preventing displacement or loss.