Download - ICP DAS

Programmable AutomationWinCon-8000ControllerIntroductionThe WinCon-8000 is a leading edge embedded platform with Intel Strong ARMCPU running the Windows CE .NET operating system. When compared to thestandard Windows OS, Windows CE .NET has some advantages, including hardreal-time capability, small core size, fast boot speed, interrupt handling at adeeper level, achievable deterministic control and low cost. Windows CE .NETprovides WinCon-8000 with the ability to run advanced application programswritten in Visual Basic .NET, Visual C# .NET, Embedded Visual C++ andPC-based control software such as SCADA software, Soft PLC ...etc.The WinCon-8000 includes a VGA port, allowing the user to choose a regularLCD monitor without the need for an expensive HMI or Industrial PC.WinCon-8000 is a cost-effective choice as a replacement for a regular PC orPLC based control system.The operating system is resident in the flash memory of the WinCon-8000 CPUmodule. User programs and data can be saved in external storage areas, suchas Compact Flash Cards and USB mass sturage or uploaded to RAM at runtime through the LAN or USB. The iPush server provides real-time transmitfunction and lets WinCon-8000 has the ability of sending out data itself and cansend acquisitive data such as monitoring data/alarm/device status to remotedevices successively through TCP/IP constructions ( Wireless LAN / VPN /Internet / GPRS ).An SDK, used to control the I-8000 and I-7000 series I/Omodules is provided for easy development of user applications using VisualBasic .NET, Visual C# or Embedded Visual C++. The included WinCon Utility isa convenient tool that enables system configuration, monitoring and softwareupdates.2-1

Programmable AutomationWinCon-8000ControllerKey Specifications & Features• Intel Strong ARM CPU• Windows CE .NET built-in• Supports VGA , Ethernet, USB,Keyboard, Mouse, Compact Flash• OPC server support• Industrial Modbus/TCP, RTU ProtocolCompliant• Convenient utility for system configuration,monitoring and software upgrade• Wide range of I/O modules: DI, DO, AI, AO,Counter/Frequency, Motion control...etc.• Various access target such as Excel,mobile phone, PDA, terminalsSmall and PowerfulWinCon-80002-2

WinCon-8000 PACMain Control Unit (MCU)The MCU is the powerhouse of the 8000. Each MCU comprises a CentralProcessor Module(CPM), a power supply, a three (3) or seven (7) slotbackplane for either 3 or 7 Parallel or Serial I/O modules. ICP DAS invents thecustomized version of non-slot structure for networked integration and narrowindustrial environment.The CPM is a powerful integrated processing enginecomprising a CPU, RAM, ROM and Ethernet.NO. of Slot 3/7W-8 X 4 X - XG-Gray color-(blank)Defaultblue color1-Master7-SaGRAF Support6-InduSoft + ISaGRAF9-InduSoft SupportModelWinCon-8000 Main Control Unit Selection GuideW-8341-GW-8741-GW-8347-GW-8747-GW-8349-GW-8749-GW-8346-GW-8746-G2-3

WinCon-8000What is InduSoft ?InduSoft PACPACInduSoft Web Studio is a powerful, integrated collection of automation tools thatincludes all the building blocks required to develop modern Human MachineInterfaces (HMI), and Supervisory Control and Data Acquisition System (SCADA)applications that run natively on Windows XP, 2000, NT and CE .NET or in an Internetand Intranet environment. A simple drag and drop, point and click developmentenvironment mimics the most complex behavior of your live processes. InduSoft WebStudio is the most ideal E-Automation solution available in the industry.InduSoft HMI/ SCADA software and automation technology can be used for:Monitoring: alarm monitoring, event monitoring, real time monitoringControl: Quality Control, Motion control, Statistical Process Control, AutomationControlMeasurement SoftwareAutomation: Building Automation, Process Automation, Plant Automation,ManufacturingAutomation, Factory Automation SystemsSCADA applications: SCADA Communication, SCADA Real Time SystemWinCon-8000The WinCon-8000 and InduSoft Integration ApplicationThe WinCon-8000 InduSoft PAC provides a bundled driver to integrate theapplication performance and the easy to use of software and hardware. It canoperate as an intelligent distributed data acquisition front end connected to aHost machine running a standard SCADA package. The user can developSCADA applications on a PC then download and apply them to theWinCon-8000 InduSoft PAC. In addition, InduSoft Web Studio allows you tosave your application screens in HTML format and export them fromWincon-8000 HTTP server for use with Internet Browsers (Internet Explorer).2-4

WinCon-8000 ApplicationDevelopment SupportHATL, ActiveX Component and MFC forWindows CEEmbedded Visual C++Visual Basic .NET and Visual C#WinCon-8000 SDK to control I-8000 I/OmodulesOPC server and Modbus/TCP ProtocolRS-232/485 Device ConnectionHTTP server, FTP server and web-basedautomation/control application developmentSQL Server CE and connectivity to ERPWinCon-8000 system configuration utilityRemote management utilityIntegrated SCADA/HMI S/W or User'sAP via Modbus/TCP Driver, ActiveXComponent or Modbus/TCP OPC ServerDatabase application developmentADOCE/OLEDBCE, ADO.NETRobust connectivity to ERP includingHTTP, IIS, RDA, Replication2-5

WinCon-8X4XOrdering Information:W-8341-G: Compact PACOrdering Information:W-8741-G: Compact PACDual-LAN PACSpecifications & FeaturesIntel Strong ARM CPU, 206MHzSDRAM: 64M bytesFlash : 32M bytesEEPROM: 16K bytes64-bit hardware unique serial numberBuilt-in Watchdog TimerReal-Time Clock10/100 BaseT x 2VGA port:320x240x16 to 1024x768x16Default is 640x480x161 x Compact Flash type II insert with ejectorUSB 1.1 x 2Reset button & rotate switchPower LEDsCOM0: Internal useCOM2: RS-232COM3: RS-485COM1: Serial Control for 87K SeriesI/O Expansion Slot:W-8341: 3 slots, W-8741: 7 slotsPower Supply:20W, Unregulated +10Vdc to +30VdcOperating Temp.: -25˚C to +55˚CStorage Temp.: -30˚C to +85˚CHumidity: 5~95%Dimensions (LxHxD)(mm):229 x 110 x 90(W-8341)354 x 110 x 90(W-8741)WinCon-8000OptionDM-64T:6.4" LCD ModuleDM-121D-AL:12.1" LCD monitorNS-205: 5-Port Industrial 10/100 Base-TX Ethernet SwitchNS-208: 8-Port Industrial 10/100 Base-TX Ethernet SwitchNote: Please use NS-205 or NS-208 Industrial Ethernet Switch with Wincon-8x4x series of controllers.2-6

WinCon-8000WinCon-8X4XW-8347-GW-8747-GOrdering Information:ISaGRAF Dual-LAN PACW-8347-G: 3 slot I/O ExpansionW-8747-G: 7 slot I/O ExpansionW-8349-GW-8749-GOrdering Information:InduSoft Dual-LAN PACW-8349-G: 3 slot I/O ExpansionW-8749-G: 7 slot I/O ExpansionISaGRAF/InduSoft PACSpecifications & FeaturesThe same hardware specificationsof WinCon-8341/8741The ISaGRAF Wincon target driver& target license are includedTwo Wincon-8x47/8x46 can be setup as Redundancy system. If one isdamaged, the other one still works.More information athttp://www.icpdas.com/faq/isagraf.htm"FAQ036"Option• DM-64T:6.4" LCD Module• DM-121D-AL:12.1" LCD monitor• NS-205: 5-Port Industrial 10/100Base-TX Ethernet Switch• NS-208: 8-Port Industrial 10/100Base-TX Ethernet SwitchNote:Please use NS-205 or NS-208 Industrial EthernetSwitch with Wincon-8x4x series of controllers.Specifications & FeaturesThe same hardware specificationsof WinCon-8x41 seriesThe W-8x49 has 300 tags runtimelicense with one driver and one webthin client.The W-8x49-G 1500 has 1500 tagsruntime with 3 drivers and one webthin client.Option• InduSoft-NT1500D: Local Interfacedevelopment version for WindowsNT/2000/XP (1500Tag, 3 drivers)• InduSoft-CE1500D: Local Interfacedevelopment version for WindowsCE(CE View) (1500 Tags, 3 drivers)• InduSoft-NT300D: Launch version forWindows NT/2000/XP(300Tag,3 drivers)• InduSoft-CE300D: Launch version forWindows CE (300 Tags, 3 drivers)• NS-205: 5-Port Industrial 10/100Base-TX Ethernet Switch• NS-208: 8-Port Industrial 10/100Base-TX Ethernet SwitchNote:Please use NS-205 or NS-208 Industrial EthernetSwitch with Wincon-8x4x series of controllers.2-7

LinCon-8000Linux PACLinCon-8000LinCon-8000 SeriesThe LinCon-8000 is the flagship compact embedded controller manufacturedby ICP DAS. Its leading technology gives you all of the best features of bothtraditional PLCs and Linux capable PCs. The LinCon-8000 system is poweredby Linux and brings in the Linux programming style and skill into the world ofPC-based PLC. Application developers can develop their own programs directlyinto C or Java language by using the LinCon-8000 SDK, and then downloadthem into the LinCon-8000 for application and use.The Linux OS demands less system resources from the embedded controllerand is therefore the best fit for it because of the embedded controller has somelimitations in system resources. It is for this reason that the LinCon-8000embbeded controller has been published to be a new generation product fromICP DAS and the Embedded-Linux OS has been adopted into the LinCon-8000.The LinCon-8000’s main purpose is to allow the numerous enthusiastic linuxusers to control their own embedded systems easily within the LinuxEnvironment.ApplicationsFactory automationIndustrial machine controlMaritime electronicBuilding management systemAircraft engines2-8

LinCon-8000LinCon-8000Linux PACNO. of Slot 3/7L-8 X 4 X X1-Master8-MatlabG-Gray color-(blank)Defaultblue colorThe LinCon-8000 model type is ruled as L-8X3X, as shown in the abovefigure. The Second number shows the slot numbers coming with the maincontroller unit. Currently, we provide three types of 3 and 7 slots. The lastnumber demonstrates the application platform. 1 stands as the Master controllerand it means that the user needs to design the application program bythemselves. For more details on the product’s specifications, please refer to thefollowing product model table given below.Software SpecificationsOS: Embedded LinuxSDK For Accessing ICP DAS I/O modulesCross Platform SDK For Microsoft desktop OSX-Windows based Graphical User InterfaceJava SupportedBuilt-in HTTP, FTP, TELNET, SSH and SFTP ServersI/O Expansion slot: 3/7WebBrowerserLinCon-8000Java classesLinCon-8000SDKLinCon-8000Cross-platformSDK & toolsClient PC Linux PC Windows 2000/XPInternet / IntranetDownloadApplicationsWeb basedI/O controlJava codeJVMEmbedded Linux2-9

LinCon-8X4XL-8341-GDual-LAN PACSpecifications & FeaturesThe same hardware specificationsof WinCon-8341/8741Embedded LinuxOptionLinCon-8000L-8741-GOrdering Information:L-8341-G: 3 slot I/O ExpansionL-8741-G: 7 slot I/O Expansion• DM-64T:6.4" LCD Module• DM-121D-AL:12.1" LCD monitor• NS-205: 5-Port Industrial 10/100Base-TX Ethernet Switch• NS-208: 8-Port Industrial 10/100Base-TX Ethernet SwitchNote:Please use NS-205 or NS-208 Industrial EthernetSwitch with Wincon-8x4x series of controllers.Specifications & FeaturesThe same hardware specificationsof WinCon-8341/8741Embedded LinuxBulit-in Matlab runtimeL-8348-GOptionL-8748-GOrdering Information:Matlab PACL-8348-G: 3 slot I/O ExpansionL-8748-G: 7 slot I/O Expansion• DM-64T:6.4" LCD Module• DM-121D-AL:12.1" LCD monitor• NS-205: 5-Port Industrial 10/100Base-TX Ethernet Switch• NS-208: 8-Port Industrial 10/100Base-TX Ethernet SwitchNote:Please use NS-205 or NS-208 Industrial EthernetSwitch with Wincon-8x4x series of controllers.

WinPAC-8000WinPAC-8000NEW!!Programmable Automation ControllerIntroductionWinPAC-8000 is the second generation PAC of ICP DAS. It equips a PXA270CPU (520MHz) running a Windows CE .NET 5.0 operating system, variantconnectivities (VGA, USB, Ethernet, RS-232/485) and 4/8 slots for highperformance parallel I/O modules (high profile I-8K series) and serial-type I/Omodules (high profile I-87K I/O modules).Its operating system,Windows CE.NET, has many advantages, including hardreal-time capability, small core size, fast boot speed, interrupt handling at adeeper level, achievable deterministic control and low cost. Using Windows CE.NET in the WinPAC-8000 gives it the ability to run PC-based Control softwaresuch as Visual Basic .NET, Visual C#, Embedded Visual C++, SCADA software,Soft PLC …etc.Comparing with the first generation WinCon-8000, it not only improves the CPUperformance (from 206 MHz to 520 MHz) and upgrading OS (from CE 4.1 to CE5.0), but also adds many reliability features, such as dual LAN, redundant powerinput, dual battery backup SRAM, etc. It gives you all of the best features of bothtraditional PLCs and Windows capable PCs.2-11

WinPAC-8000 Programmable Automation Controller WinPAC-8000Key Specifications & Features1. PXA270 CPU (520MHz) & 48MB Fash & 128MB SDRAM2. Windows CE .Net 5.03. Built-in VGA Port4. Remote Maintenance via FTP Server and VCEP Software5. Built-In OPC Server (Quicker)6. 64-bit Hardware Serial Number7. Rich Software Solutions (VS.Net 2003, 2005 and eVC)8. Upgrading applications from WinCon to WinPAC Just Copy and Play9. I/O Module Hot Swap Ability10. Rich I/O Expansion Ability (RS-232/485, Ethernet, FRnet, CAN)11. Built-In Flash Disk (14MB)12. Dual Watchdog Timer13. Dual Battery-Backup SRAM (512KB)14. Dual Ethernet Ports15. Redundant Power Inputs16. Ventilated Housing Design Allows Operation Between -25˚C ~ +75˚C2-12

WinPAC-8000WinPAC-8000Hardware SpecificationsCPU moduleCPUSDRAMDual Battery Backup SRAMFlashEEPROMExpansion Flash MemoryRTC (real time clock)64-bit Hardware Serial NumberDual Watchdog TimerRotary SwitchDIP SwitchConnectivityVGAEthernet PortUSB 1.1 (host)COM portsDimensionsWP-8041WP-8141WP-8441WP-8841Operating EnvironmentOperating TemperatureStorage TemperatureHumidityPowerInput RangeIsolationRedundant Power InputsPXA270 or compatible (32-bit and 520MHz)128MB512K bytes (for 5 years data retain)48MB (32MB for OS image, 14MB for built-in Flash disk, 2MB for registry)2KBMicro SD socket with 1GB flash cardYear-2000 compliance; seconds, minutes, hours, date of the month;month, year, valid up from 1980 to 2079YesYesYes (0~9)Yes (8 bits); (for WP-844x and WP-884x only)1 (800x600 resolution)210/100Base-TX Ethernet Controller(Auto-negotiating, Auto_MDIX, LED indicator)15; (COM3 and COM4 for WP-8441 and WP-8841 only)COM0=internal use for I-87K modules in slot,COM1=RS-232, COM2=RS-485,COM3=RS-232/485, COM4=RS-23264mm x 132mm x 98mm95mm x 132mm x 98mm230mm x 132mm x 98mm354mm x 132mm x 98mm–25°C to +75°C–30°C to +85°C5 ~ 95%, non-condensing+10V ~ +30VDC1KVYesProgrammable Automation Controller2-13

WinPAC-8000WinPAC-8000 NamingNO. of Slot 0/1/4/8WP-8XCommunication3- VGA 1024 x 768 & USB x 24- VGA 800 x 600 & USB x 1Programmable Automation ControllerX X-XXSoftware EN- English1- StandardTC- Traditional Chinese7- ISaGRAFSC- Simplified Chinese9- Indusoft6- ISaGRAF + IndusoftWinPAC-8000ModelWP-8031WP-8131WP-8431WP-8831WP-8037WP-8137WP-8437WP-8837WP-8039WP-8139WP-8439WP-8839WP-8041WP-8141WP-8441WP-8841WP-8047WP-8147WP-8447WP-8847WP-8049WP-8149WP-8449WP-8849SoftwarePre-InstalledNoneNoneNoneNoneISaGRAFISaGRAFISaGRAFISaGRAFIndusoftIndusoftIndusoftIndusoftNoneNoneNoneNoneISaGRAFISaGRAFISaGRAFISaGRAFIndusoftIndusoftIndusoftIndusoftOSCE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0: WP-8x3x will be available soon.Selection GuideCPU520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHzFlash SDRAM48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MBVGAResolution1024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 768800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600USB222222222222111111111111I/Oslot014801480148014801480148

WinPAC-8000WinPAC-8000ModelWP-8036WP-8136WP-8436WP-8836WP-8046WP-8146WP-8446WP-8846SoftwarePre-InstalledISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftSelection GuideOS CPU Flash SDRAMCE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHzProgrammable Automation Controller48MB48MB48MB48MB48MB48MB48MB48MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MBVGAResolution1024 x 7681024 x 7681024 x 7681024 x 768800 x 600800 x 600800 x 600800 x 600USB22221111I/Oslot01480148: WP-8x3x will be available soon.Software Selection GuideItemISaGRAF-256-EISaGRAF-256-CISaGRAF-256InduSoft-NT1500DInduSoft-CE1500DInduSoft-NT300DInduSoft-CE300DDescriptionISaGRAF Workbench Software, Up to 256 I/O Tags + one ISaGRAF Book-E (English)ISaGRAF Workbench Software, Up to 256 I/O Tags+ one ISaGRAF Book-C (Chinese)ISaGRAF Workbench Software, Up to 256 I/O TagsLocal Interface development version for Windows NT/2000/XP(1500Tag, 3 drivers)Local Interface development version for Windows CE(CE View)(1500 Tags, 3 drivers)Launcht version for Windows NT/2000/XP(300Tag, 3 drivers)Launch version for Windows CE (300 Tags, 3 drivers)2-15

LinPAC-8000Linux PACNEW!!LinPAC-8000LinPAC-8000 SeriesLinPAC-8000 series is the second generation Linux based PAC of ICP DAS.Its leading technology gives you all of the best features of both traditional PLCsand Linux capable PCs. The LinPAC-8000 system is powered by Linux andbrings in the Linux programming style and skill into the world of PC-based PLC.Application developers can develop their own programs directly into C or Javalanguage by using the LinPAC-8000 SDK, and then download them into theLinPAC-8000 for application and use.The Linux OS demands less system resources from the embedded controllerand is therefore the best fit for it because of the embedded controller has somelimitations in system resources. It is for this reason that the LinCon-8000embbeded controller has been published to be a new generation product fromICP DAS and the Embedded-Linux OS has been adopted into the LinPAC-8000.The LinPAC-8000’s main purpose is to allow the numerous enthusiastic linuxusers to control their own embedded systems easily within the LinuxEnvironment.ApplicationsFactory automationIndustrial machine controlMaritime electronicBuilding management systemAircraft engines2-16

LinPAC-8000Programmable AutomationLinPAC-8000ControllerLinPAC-8000 NamingNO. of Slot 0/1/4/8LP-8 XXXCommunication3- VGA 1024 x 768 & USB x 24- VGA 800 x 600 & USB x 1Software1- Standard8- MatlabModelLP-8031LP-8131LP-8431LP-8831LP-8038LP-8138LP-8438LP-8838LP-8041LP-8141LP-8441LP-8841LP-8048LP-8148LP-8448LP-8848SoftwarePre-InstalledNoneNoneNoneNoneMatlab runtimeMatlab runtimeMatlab runtimeMatlab runtimeNoneNoneNoneNoneMatlab runtimeMatlab runtimeMatlab runtimeMatlab runtimeSelection GuideOSLinuxLinuxLinuxLinuxLinuxLinuxLinuxLinuxLinuxLinuxLinuxLinuxLinuxLinuxLinuxLinux: LP-8x3x will be available soon.CPU520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHzFlash48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MBSDRAM128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MBVGAResolution1024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 768800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600USB2222222211111111I/Oslot01480148014801482-17

KinPAC-8000KW PACNEW!!IntroductionThe ICP DAS KinPAC-8000 (KP-8045/KP-8145/KP-8445/KP-8845) is aWindows CE.NET based SoftLogic PAC(Programmable Automation Controller)which bundles KW-Software solution inside. It features:KinPAC-8000MultiProg-standard IEC-61131 programming systemThe programming system is based on a modern 32 bit windows technology,providing comfortable handling including zoom, drag & drop and dockablewindows. The system allows the handling of IEC configuration elements,including libraries and provides a powerful debug system. The programmingsystem consists of a PLC independent kernel for programming in the variousIEC programming languages. To do so, the textual languages ST and IL as wellas the graphical languages LD, FDB and SFC are provided.ProVisit-the machine visualization toolUsing it, visualizations are created intuitively within the graphical editor whichprovides a large number of standard objects and dynamizations for exampleSize, Position, Rotation, Color changes and different Actions.Built-in Windows CE.net real-timemultitasking systemOmline change functionSupports Modbus TCP/IP SlaveprotocolSupports retain variables &battery backup memorySupport Multi RS-485 portsDual Ethernet portsKW-KinPAC2-18

KinPAC-8000KinPAC-8000 KW PAC NO. of Slot 0/1/4/8KP-8X X 5 -KinPAC-8000 NamingXXCommunication3- VGA 1024 x 768 & USB x 24- VGA 800 x 600 & USB x 1EN- EnglishTC- Traditional ChineseSC- Simplified ChineseModelSoftwarePre-InstalledOSSelection GuideCPUFlashSDRAMVGAResolutionUSBKP-8035 KW runtime CE 5.0 520 MHz 48MB 128 MB 1024 x 768 2 0KP-8135 KW runtime CE 5.0 520 MHz 48MB 128 MB 1024 x 768 2 1KP-8435 KW runtime CE 5.0 520 MHz 48MB 128 MB 1024 x 768 2 4KP-8835 KW runtime CE 5.0 520 MHz 48MB 128 MB 1024 x 768 2 8KP-8045 KW runtime CE 5.0 520 MHz 48MB 128 MB 800 x 600 1 0KP-8145 KW runtime CE 5.0 520 MHz 48MB 128 MB 800 x 600 1 1KP-8445 KW runtime CE 5.0 520 MHz 48MB 128 MB 800 x 600 1 4KP-8845 KW runtime CE 5.0 520 MHz 48MB 128 MB 800 x 600 1 8: KP-8x3x will be available soon.OptionNS-205: 5-Port Industrial 10/100 Base-TX Ethernet SwitchNS-208: 8-Port Industrial 10/100 Base-TX Ethernet SwitchNote: Please use NS-205 or NS-208 Industrial Ethernet Switch with KinPAC-8000 series of controllerI/OslotModelMultiProg 4.0OPC-Server 2.0ProVisit 2.3Software Selection GuideDescriptionKW-software MultiProg 4.0 IEC 61131 programming system for windows 2000/XPKW-software OPC-Server 2.0 softwareKW-software ProVisit 2.3 machine visualization2-19