installation instructions vega heatsink fluorescent slider dimmers

VEGA HEATSINK FLUORESCENT SLIDER DIMMERMultiple Ganging of DimmersVega Heatsink Slider Dimmers are mounted with No Fins Broken.Any combination of dimmer models may be ganged together. The dimmersmust be spaced to the dimensions shown in Figure 1. Allow 6” of clearanceabove and below the dimmers.Figure 12 3 /4" 3 5 /8" 4 1 /2"How to determine Wallbox SizeSmall DimmerV500ESIV2000FAMUV2000HDFULarge DimmerV1500EBU4 1 /4"2 5 /8" 4 5 /16"Size: SmallSize: LargeMulti-Gang WallboxWhen mounting dimmers, use Table A to determine what size multi-gang wallboxis required.NOTE:A. When installing an even number of small dimmers only use wallbox size listedin Table A and space one additional box 3/4” away from the others.B. When combining small and large dimmers be certain to position a smalldevice at one end and a large device at the other end of the multi-gang box.C. Mount dimmers with heatsink fins aligned vertically.Number of SmallDevices0123456* See Note ATable A0011+1*44+1*77+1*Number of Large Devices11356891124679101213WALLBOX SIZE368101113141649111214151718Ballast DimmersAll Ballast Dimmers are factory-calibrated at 60Hz and do not require low-end lightadjustment. For proper dimming performance, lamps must be operated at full intensityfor 100 hours prior to dimming.V2000FAMU (No derating required)V2000HDFU (No derating required)V1500EBU (see back page)V500ESI (see back page)Philips ControlsFor technical/sales assistance, call: 1-800-526-2731www.lolcontrols.com P/N 85-6259