ROVASI_BATCHONE2015_en

CELLIP 65 PROTECTIONM2.EProtection rating against dust and moisture: IP65 from underneath.Protection rating for resistance to harmful mechanical impacts: IK07.Die-cast aluminium trim with glass (or polycarbonate / IK10) cover fixed to thedownlight with screws. Silicon rubber gasket sealing to guarantee IP65 protection.Ideal for high-humidity environments or interior spaces that require low-maintenance.Available for fixtures of 140mm, 170mm, 200mm, 225mm, 255mm and 300mm exterior diameter.DIFFUSER01Clear glass02Frosted glass03Frosted inside/clear outside04Frosted outside/clear inside+IKPolycarbonate diffuser available to increase the IK protection rate: IK10.If a polycarbonate diffuser is required, please note “P” after the diffuserfinish : 01P, 02P, 03P or 04P.TRIM1 - RAL9010: Pure White 4 - RAL7016: Anthracite Grey7 - RAL9006: White Aluminium2 - RAL9005: Jet Black3 - Satin Bronze5 - RAL1036: Pearl Gold Bright6 - Metallic Lacquer RAL9022: ChromeMore finishes are available on page 103.For customized RAL colour, please contact us.REFERENCE COMPOSITION: M2.E0200.2.04: IP65 protection accessory with die-cast aluminium trim and frosted outside/clear inside glass diffuser for fixtureof 200mm exterior diameter.FINISHESTRIM1 - RAL9010: Pure White2 - RAL9005: Jet Black3 - Satin Bronze4 - RAL7016: Anthracite Grey5 - RAL1036: Pearl Gold Bright6 - Metallic Lacquer RAL9022: Chrome7 - RAL9006: White AluminiumMore finishes are available on page 103.For customized RAL colour, please contact us.18RECESSED DOWNLIGHTS