Instruction Manual - P.C. Richard & Son

frame. Follow the sequence shown below in Illustration # 2.4. Align the handle with the screws installed in the above step # 3. Tighten the screws using aPhillips head screwdriver until the handle sets both flush and secured tightly against the doorframe. (DO NOT overtighten as this will cause damage to the handle assembly).5. Replace the door gasket to its original position.Illustration # 1 Illustration # 21 Gasket 2 Decorative Plug 3 Phillips Head Screw4 Lock Washer 5 Flat Washer 6 S/S HandleOPERATING YOUR WINE CHILLERIt is recommended you install the Wine Chiller in a place where the ambient temperature is between23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, theperformance of the unit may be affected. For example, placing your unit in extreme cold or hotconditions may cause interior temperatures to fluctuate. The range of 5º-18ºC/40º-65ºF may not bereached.Recommended Temperatures for Chilling Wine.Red Wines 15º - 18º C 58 – 65º FDry/White Wines 9º - 14º C 48 – 57º FRose Wines 10º - 11º C 49 – 51º FSparkling Wines 5º - 8º C 40 – 47º FYou can select temperature display setting from Fahrenheit to Celsius degree by touching the ºF/ºCmark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature displaywindow.9