Building Catalogue - AEC Online

ISOL SILSONIC BRT 400High sound insulation for WALLS in CLASS 1IDEAL FOR PUBLIC SPACESDescriptionISOL SILSONIC BRT 400 is an acoustic and thermal insulation paneland is composed of two layers of polyester fibers in CLASSE1/F1 andin between there is a class 1 elastomeric high density barrier. ISOLSILSONIC BRT 400 is also available in an adhesive version with waterbasedacrylic glue, to support the installer in the laying phase.ApplicationsISOL SILSONIC BRT 400 is ideal for a thermoacoustic insulation of wallsand ceilings using a single panel, it is particularly suitable where there isneed for an insulating material in reaction to fire class 1 without loosingthe high acoustic and thermal insulation performance. ISOL SILSONICBRT 400 can be easily inserted within masonry cavity walls or within thestuds of drywalls (plaster, wood, magnesium) and placed right against thedrop ceilings.LayingFor the application in gaps use our special MAPPYCOL S45 glue (page96) and tape horizontal and vertical seams between adjacent panelswith MAPPYTAPE TXT adhesive (page 98) to avoid possible acousticbridges. For application inside drywalls it is recommended the laying ofISOL SILSONIC BRT 400 inside the studs of the wall or to avoid theuse of glues, apply the adhesive version of ISOL SILSONIC BRT 400.Within drop ceilings lean the product against the internal surface.ISOL SILSONIC BRT 400 can be cut using a cutter.New buildingRenovationsHollow brick(thick. 8 cm)Hollow brick(thick. 8 cm)PlasterPlasterISOL SILSONICBRT 400ISOL SILSONICBRT 400POLISTIKHollow brick(thick. 12 cm)PlasterPlasterDrywallPlaster38