Securaband™ Tag U ser Guide - Stanley Healthcare Solutions

WarrantyXmark Securaband tags are warranted againstdefects in materials and workmanship and shallperform in accordance with published specificationsfor a period of 3 (three) years.Tag SpecificationsOutput FrequencyInput FrequencyBattery LifeOperatingTemperature433.92 MHz307 KHz3 years14° to 122°F (-10° to +50°C)Humidity 0-95% RH @ 70°F (21°C),non-condensingDimensions 1.08 x 1.16 x 0.6”(2.74 x 2.95 x 1.5 cm)Weight 0.26 oz. (7.5 g)Xmark reserves the right to change specificationswithout notice.StatementsUnited States—Federal Communication Commission(FCC)This device complies with Part 15 of the FCCRules. Operation is subject to the following twoconditions: (1) this device may not cause harmfulinterference, and (2) this device must acceptany interference received, including interferencethat may cause undesired operation.NOTE: This equipment has been tested andfound to comply with the limits for a Class Adigital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonableprotection against harmful interferencewhen the equipment is operated in a commercialenvironment. This equipment generates, uses,and can radiate radio frequency energy and, ifnot installed and used in accordance with theinstruction manual, may cause harmful interferenceto radio communications. Operationof this equipment in a residential area is likelyto cause harmful interference in which case theuser will be required to correct the interferenceat his own expense.Warning: Changes or modifications notexpressly approved by Xmark could void theuser’s authority to operate the equipment.Canada—Industry CanadaThe term “IC:” before the certification/registrationnumber only signifies that Industry Canadatechnical specifications were met.Limitation of LiabilityThis Product has been designed for use to reducethe risk of resident wandering through remotedetection.The range, accuracy, function and performanceof this Product may vary from the publishedspecifications due to many factors, including,without limitation, site impairments fromstructural effects, metal objects in the vicinity,placement of the receiver and transmitter,interference from other electrical devices, atmosphericeffects, installation, and maintenance.There may be other factors, which also affectperformance of this Product.Xmark Corporation does not guarantee thatthis Product will detect 100% of resident wanderings.Xmark does not guarantee that thisProduct will not return false reports of residentwandering.Monthly testing and maintenance of this Product,as described in the Product documentation,is essential to verify the system is operatingcorrectly and to ensure that the probability ofdetecting an alarm and/or locating the transmitterare maximized.The failure to undertake regular testing andmaintenance will increase the risk of systemfailure and failure to detect resident wandering.The failure to undertake regular testingand maintenance will increase the risk of falsereports of resident wandering.Xmark hereby disclaims all warranties,express or implied, arising out of or in connectionwith any of its Products of the useor performance thereof, including but notlimited to, where allowable by law, all otherimplied warranties or conditions of merchantablequality and fitness for a particularpurpose and those arising by statute or otherwisein law or from a course of dealing orusage of trade.Xmark’s liability to you or anyone claimingthrough or on behalf of you with respect toany claim or loss arising out of the use ormisuse of Xmark’s Product, defective productsor materials, improper installation ormaintenance of Xmark’s Product or productsor the system in which they are incorporated,or alleged to have resulted from an act oromission of Xmark or any person, negligentor otherwise, shall be limited to:A) the repair or replacement of defectiveProduct or materials supplied by Xmarkduring the warranty period as set out in theProduct documentation; or, at the option ofXmark,B) a refund of the purchase price of the Productsupplied by Xmark.In no event shall Xmark be liable for general,specific, indirect, consequential, incidental,exemplary or punitive damages or any lossesor expenses suffered by you or anyone else,whether or not Xmark, or its employees,officers, agents, resellers or installers has beeninformed of the risk of such loss or expenseand whether or not such losses or expenseswere foreseeable.Securaband Tag User GuidePart Number: 804A2401Certified to the ISO 9001 Quality Standard© 2008 Xmark Corporation. All Rights Reserved. Xmark and RoamAlert are registered trademarks, and Securabandis a trademark, of Xmark Corporation in North America. All other company and product names may be trademarks oftheir respective companies. Printed in Canada. July 2008. 980-000323-000 Rev 01.Telephone: 1.866.55.XMARKInternational: +1 (613) 592.6997Facsimile: (613) 592.4296Web Site: www.xmark.comE-mail: support@xmark.com309 Legget DriveOttawa, ON K2K 3A3 Canada

IntroductionThe RoamAlert Securaband tag andstrap provide a robust physical barrierto unauthorized removal. Each tag isidentified by its own unique code. Thesystem generates an Exit alarm if the tagis brought near an exit protected by aDoor Controller. The Securaband Tagcan be worn on an individual’s wristor ankle and is attached using Xmark’scut-resistant Securaband strap.Strap w/ClaspTagItems Required• Securaband tag (804A2401),• Securaband sizing tool(804A1501),• Securaband strap (size determinedby measurement), and• Securaband removal tool(804A1401).Attaching the TagAttach the tag as follows:1 To determine the strap size, wrapthe sizing tool around the resident’sInstructions for the Securaband TagRemovalToolSizingToolNote: Measure carefully to ensure thatthe appropriate strap size is selected.Once the strap has been attached, itcannot be used again.2 Select the appropriate Securabandstrap from storage (the size is printedon the box as well as on the insideof the strap).3 Slide a Securaband tag onto the strap,making sure that both the serialnumber on the tag and the size stampon the strap are facing you.4 Position the strap around the resident’swrist or ankle and insert thefree end of the strap into the claspuntil it clicks into place.5 Discard the sizing tool (it may berecycled, but not used again).3While holding the tool handlestogether, pull the strap end out ofthe clasp.4 Slide the tag off the strap, clean andstore the tag, and discard the strap.Cleaning the TagFollow these recommendations forcleaning the tag. Securaband straps aresingle-use and cannot be re-attached.• Use a mild soap and water toremove any apparent debris.• Disinfect tags by wiping with analcohol sanitizer or germicidalcleaner for 60 seconds. Use onlycleaners marked as safe for plastics.Tags are incompatible with disinfectantscontaining Glycol Ether.• Dry with a soft, clean cloth.• Do not use an autoclave to cleantags or serious damage may result.StorageMeasuring Barwrist or ankle, making sure that theRoamAlert logo is facing you. Thestrap size is the first number to theright of the measuring bar (in thisexample, size 10).Removing the TagRemove the tag as follows:1 Place the removal tool over the clasp,making sure that the chevron on theclasp and the lanyard ring on the toolare facing in the same direction.2 Squeeze the tool handles together tounlock the clasp.Store tags in a Tag Rack (AGETR01-000)at room temperature. A Tag Rack holdsup to 42 tags. Regularly rotate your taginventory so that tags are used evenly.Securaband Tag User Guide