TABLE OF CONTENTS - Robbins Instruments, Inc.

More documents

Recommendations

Info

Vacuson 40/60NOUVAG AG4 System Assembly4.1 Overview1514131612171118109194 567832022111. Suction Tube2. Suction Cannula (not included)3. Mains cable4. Mains Connector (back panel)5. Fuse Box (back panel)6. Outflow “EXHAUST“ (back panel)7. Connection On/Off-pedal“ON/<strong>OF</strong>F PEDAL“ (back panel)8. Connection Air-pedal“AIR PEDAL“ (back panel)9. Quiver10. Quiver Holder11. Mains switch “ON / <strong>OF</strong>F“12. Manometer13. Vacuum Regulator “VACUUM“14. Bacterial filter15. Control unit16. Suction jar holder17. Suction jar lid18. Suction jar19. Stand, moveable20. Pedal cable21. Pedal4.2 Optional: Control Unit Stand attachment(Depending on each Vacuson model a moveable stand is also included)1) Slip washers on Phillips screws.2) Insert screws in holes and screw into Control unit threaded holes.3) Drive screws home gently with a screwdriver.4 No. 31791 04/08
NOUVAG AG Vacuson 40/60A longer tube is supplied together with the stand in order to connect the bacterial filterto the suction jar, so the suction jar can be hanged in front of the stand.4.3 Secretion Jar Lid attachment1) Place Jar in vertical position2) Insert lid with O-ring on Jar rim.3) Clear Spring Clamp from outer rim, allowing lid to drop in place4) Press Lid down firmly with handle.5) Turn Spring Clamp into position.6) Snap Spring Clamp down into holding position.When using the VACUSON 40/60, the Secretion Jars must be in their holders at alltimes! This is to avoid tipping and spillage which could destroy the pump!Please follow the separate Instructions for the use of the disposable Monokit bottles (not included).4.4 Suction Assembly Connection231) With Lid firmly secured, Hang Secretion Jar from supportmounting.12) Affix narrow Connector (1) onto Secretion Lid neck.3) Insert bacterial filter (3) into socket of main unit.4) Connect tube of baccterial filter (2) with bacterial filter andpush-on contact.Insure that the VACUSON 40/60 is never operated without the Bacterial Filter,otherwise the equipment could be destroyed!5) Hang Quiver (if included) on Stand holder.6) Affix Overflow Connector to Secretion Jar Lid..7) Affix Suction Tube to connector neck.Do not forget to check the correct operation voltage on the rating plate!8) Plug in Control Unit Mains.The System is Operational!Refer to Function Control of the device’s assembling, see 5.8 Function Control.No. 31791 04/08 5
Page 1 and 2: NOUVAG AG Vacuson 40/60TABLE OF CON
Page 3: NOUVAG AG Vacuson 40/602 Safety Mea
Page 7 and 8: NOUVAG AG Vacuson 40/605.4 Optional
Page 9 and 10: NOUVAG AG Vacuson 40/606 Disinfecti
Page 11 and 12: NOUVAG AG Vacuson 40/607.5 Seals an
Page 13: NOUVAG AG Vacuson 40/609 Replacemen

TABLE OF CONTENTS - Robbins Instruments, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?