Rhino 660 Dyna FS Ignition (Value) (04-07)
Rhino 660 Dyna FS Ignition (Value) (04-07)
Rhino 660 Dyna FS Ignition (Value) (04-07)
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
If this doesn't fix the problem, the ignition should be returned for testing. If the problem persists when using the stockignition then the problem is external to the <strong>Dyna</strong> ignition.DYNA <strong>FS</strong> 7-13 / YAMAHA RHINO <strong>660</strong> IGNITION CURVESIGNITION ADVANCE(CRANKSHAFT DEGREES)RPM / 1000Assumes 12° base timingWARNING:Installation of a grounded tether kill switch to the ignition coil signal willdamage the CDI and void the warranty.12V DC-CDI (Yamaha <strong>Rhino</strong> <strong>660</strong>): Use a normally closed tether kill switch connected in series with the +12Vinput to the ignition. When the tether is removed, it should disconnect the +12V power to the ignition. If anormally closed tether kill switch cannot be located, then a grounded tether can be used to ground the pickupsignal (White with red stripe wire in the stock ignition harness)2801209 3-15-06 REV A
Change language