D - Tiger-Tools Kft.

More documents

Recommendations

Info

Technical Data Directions for the work of the lathe In case of use the high speed drill first in the lathe, after drilling the workpiece around 5mm makesure the core size.The core size should be 0.2mm-0.8mm.If the core size is too small or the corner part in the center of inside insert break, it is desirable towork turning the drill to 180 angle.Technical Data In case of doing also the penetrating work in the lathe, coming off The original thing(DISC) thewound can happen so absolutely use the safety cover.104www.koreatechnics.com
Technical Data Directions for the use Turbo drill & MAX drill As the below pictures in the case that there are biger home than center drill or protrudedpart, The center drill and insert can be broken by hard vibration. In the case that there is inclined side, after make the part flat by milling work, please dodrilling work. Technical Data Overlapped driling is impossible. In case of wanting the overlapped drilling, Please use STDand FXD drill. KOREA TECHNICS is The TOP of the world technics 105
Page 1:
http://www.koreatechnics.com
Page 5:
HIGH SPEED DRILLConstruction System
Page 10 and 11:
HIGH SPEED DRILLSTD-V 4D DRILL
Page 12 and 13:
HIGH SPEED DRILLSTD-V Big diameter
Page 14 and 15:
HIGH SPEED DRILLHSD-V 2D DRILL
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
HIGH SPEED DRILLHSD-V Big diameter
Page 22 and 23:
HIGH SPEED DRILLMCD 2D DRILL EX
Page 24 and 25:
HIGH SPEED DRILLMCD 3D DRILL EX
Page 26 and 27:
HIGH SPEED DRILLHSD 2D DRILL32w
Page 28 and 29:
TURBO DRILLFXD 4D DRILL Shank
Page 30 and 31:
TURBO DRILLFXD 8D DRILL Shank
Page 32 and 33:
TURBO DRILLVLT 5D STANDARD TYPEDRIL
Page 34 and 35:
TURBO DRILLVLT 6.5D STANDARD TYPEDR
Page 36 and 37:
TURBO DRILLVLT 8D STANDARD TYPEDRIL
Page 38 and 39:
TURBO DRILLTMD 5D
Page 40 and 41:
TURBO DRILLTMD CARTRIDGE TYPE
Page 42 and 43:
TURBO DRILLHSD 2D DRILL 48
Page 44 and 45:
MAX DRILLVMD DRILL
Page 46 and 47:
MAX DRILLDRILLThe drill body treate
Page 48 and 49: TREPANNING DRILLTPD 2.5D DRILL TPD
Page 50 and 51: MX HOLDERMXA/MXBMX HOLDER MX CYLIND
Page 52 and 53: MX HOLDERBT-MXA/BT-OMX/BT-OAXMX HOL
Page 54 and 55: MX HOLDERNT-MXA/NT-OMX
Page 56 and 57: BASIC HOLDER NEW TYPE ARBORBT-WSA/B
Page 58 and 59: BASIC HOLDER NEW TYPE ARBORSK-WSA/S
Page 60 and 61: BASIC HOLDER NEW TYPE ARBORNT-WSA/N
Page 62 and 63: BASIC HOLDER NEW TYPE ARBORMT-WSA/M
Page 64 and 65: BASIC HOLDER Surprising long life
Page 66 and 67: BASIC HOLDERBT-OMS/BT-OME
Page 68 and 69: BASIC HOLDERSK-SLA/SK-ETA DIN69871/
Page 70 and 71: BASIC HOLDERNT-SLA/NT-ETA DIN2080/N
Page 72: BASIC HOLDERMT-SLA/MT-ETA DIN228B/M
Page 76 and 77: ACCESSORIESCARTRIDGE ACC
Page 78 and 79: ACCESSORIESCARTRIDGE INNER O
Page 80 and 81: ACCESSORIESPILOT DRILL/DRIVE RING/D
Page 82 and 83: ACCESSORIESCLAMPING SCREWS FOR INDE
Page 84 and 85: ACCESSORIESCLAMPING BOLTS FOR VLTAC
Page 88 and 89: Technical Data
Page 94 and 95: Technical Data ISOKorea United Ki
Page 96 and 97: Technical Data ISOKorea United Ki
Page 100 and 101: Technical Data Directions for the
Page 102 and 103: Technical Data TaperNo.L1mmDmmMmmK
Page 104 and 105: Technical DataCYLINDRICAL SHANK TYP
Page 106: Technical DataMX MODULAR SYSTEMTech
show all

D - Tiger-Tools Kft.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?