VRIOGS 012.7.15 RevA - Train Protection Warning Systems - Public ...

VRIOGS 012.7.15 Revision AiiiPURPOSE OF THE STANDARDThe Standard has been created through the collaboration of members of theVictorian Rail Industry Operators’ Group (VRIOG) for the purpose of establishingstandards which, if implemented throughout the Victorian Rail Network, will facilitatethe interoperability of infrastructure.The use of the Standard is not prescribed by law but, if adopted, conformity with theprovisions of the Standard is mandatory in order that the purpose of the Standard beachieved.DISCLAIMERThe Standard is published by the Director of Public Transport for informationpurposes only and does not amount to any kind of advice.Each person is responsible for making his or her own assessment of all suchinformation and for verifying such information. The content of this publication is not asubstitute for professional advice.The Director of Public Transport and VRIOG accept no liability for any loss ordamage to any person, howsoever caused, for information contained in thispublication, or any purported reliance thereon.COPYRIGHT STATEMENT© Director of Public Transport 2005.This publication is copyright. No part may be reproduced by any process except inaccordance with the provisions of the Copyright Act.Where information or material is so used, it should be used accurately and theStandard should be acknowledged as the source of the information.NOTE: This document is controlled only when viewed on the DOT Engineering Standards website.Any other copy of this document is uncontrolled, and the content may be inaccurate.