Metal working machines - Stuermer Maschinen

BF 46VarioCNC complete add-on kitZ axisTorque 17.4 Nmon the spindle Z axisTravel speed*· max. 14 mm/sec. with trapezoid spindle· max. 18 mm/sec. with ball screwY axisTorque 17.4 Nmon the spindle X- and Y axisTravel speed*· max. 16 mm/sec. with trapezoid spindle· max. 20 mm/sec. with ball screwX axisDescription „BF 46Vario“ on page 125CNC complete add-on kitConsisting of:· 1 x CNC Controller IV· 3 x CNC control cards· 1 x reference switch kit milling· 1 x CNC add-on kit MK F46DPScope of delivery: Add-on kit MK F46DP· 3 x step motors 8 Nm· 3 x assembly housing incl. lid· 3 x toothed belts· 6 x toothed belt pulleys· 1 x distance ring· 2 x nuts· 1 x bushing· 15 meters shielded cable· Set of screwsAdd-on kit without workshop assembly 357 0044 2'790.00Add-on kit with workshop assembly* 353 9024 3'100.00Complete kit ball screws Item No € plus VATConsisting of:· 3 x ball screws with spindle nut· Ball screws for three axesWithout workshop assembly 357 4456 850.00With workshop assembly 353 9225 1'590.00Ball screws individual· with spindle nutX axis Ø 20 mm 357 4321 319.00Y axis Ø 20 mm 357 4322 299.00Z axis Ø 25 mm 357 4323 249.00Factory assembly ball screw 900 0524 290.00· Each axis1Transportation packaging flat ratefor workshop assembly€ 59.00 (TPFR 3) plus VAT*Important notes:· The indicated speeds represent a nominal value which was determined on the current OPTI BF46 Vario. They can deviate up and down depending on the used software system and on the operating moderesp. the load of the motor.· The indicated travels can change when using ball screws.· The EU Directive EN2006/42 EC is complied with only with the housing SHC, the electronic kit and aworkshop assembly in an authorised workshop.· Without the SHC and the safety kit the machine is incomplete in the CNC equipment, thus the CE directiveis not complied with.· We imperatively recommend the briefing performed by our specialists.Software recommendationson page 222212