Calibration System Manual - Agilent Technologies

��� � �
EMG Quality
Calibration System Manual Doc # epsg1024153
Revision No: 42 Page 4 of 48
Document URL: http://sharedoc.collaboration.agilent.com/sites/EMG-
Wide/SD/ISO/ISO%2017025/EMG_CSM_epsg1024153.pdf
������
Foreword
This calibration system manual has been written for all organizations within the Electronic
Measurements Group (EMG) of Agilent Technologies.
Responsibility for the document contents belong to the EMG Business Management System
Manager and the EMG Calibration Program Manager.
1.0 Purpose
This document describes procedures employed by Agilent Technologies‟ Calibration Facilities
for the calibration of instruments. The paragraph numbering used in this document is consistent
with that used in ISO/IEC 17025:2005(E).
Section 4 of this document describes the calibration facilities‟ Business Management System.
This document is designed for use in conjunction with both the EMG Business Management
System Manual and the local department's documented process and procedures.
Section 5 of this document defines the system to be used for calibrations performed by
departments within EMG:
� Describes calibration facilities‟ policies, procedures, and processes established to meet
the requirements of ISO/IEC 17025:2005(E), ANSI/NCSL Z540.1-1994 (R2002),
ANSI/NCSL Z540.3-2006, ISO 10012:2003(E) and the needs our customers and/or
external registration bodies.
� Provides a common standard upon which EMG facilities‟ calibration and Business
Management Systems are built.
� Provides a detailed description of how calibration is accomplished at Agilent
Technologies.
The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use.
This manual contains links to subordinate documents that are restricted to Agilent personnel only and may not work if
accessing this document from a public site.