IMPORTANT DOCUMENT!

More documents

Recommendations

Info

THE BALANCER WILL SPIN THROUGH A NORMAL BALANCING CYCLE.WHEN THE BALANCER STOPS, IT SHOULD ASK FOR 100G/3.5OZ ATTHE 12 O’CLOCK POSITION ON THE WHEEL, WITH THE CALIBRATION WEIGHTAT THE 6 O’CLOCK POSITION.REMOVE THE CALIBRATION WEIGHT (100 GRAM/3.5 OZ.) AND WHEEL.THE BALANCER IS NOW CALIBRATED AND READY FOR USE.
CONVERTINGGRAMS - OUNCES1. TURN THE WHEEL BALANCER ON AND MOUNT A WHEEL ONTO THEMACHINE. USING THE AUTOMATIC DATA ENTRY FEATURE OR MANUALLYENTER THE FOLLOWING:“A” (DISTANCE OF RIM FROM THE MACHINE),“B” (WIDTH OF THE RIM) (THIS MEASUREMENT MUST BE ENTEREDMANUALLY)“D” (DIAMETER OF RIM)2. CLOSE THE HOOD AND THE MACHINE WILL SPIN THROUGH A CYCLE ANDCOME TO A COMPLETE STOP. OPEN THE HOOD AND THE DISPLAY WILL SHOWTHE WEIGHT REQUIRED IN THE LED SCREEN.3. THE FIRST TIME THIS IS DONE THE WEIGHT READING WILL BE IN GRAMS. TOCONVERT TO OUNCES:PUSH AND HOLD: THE “STOP” KEY AND BOTH THE “A” AND “A”MEASUREMENT KEY.THE KEYS MUST BE PUSHED SIMULTANEOUSLY.4. YOU WILL KNOW THE WEIGHT SCALE HAS BEEN CHANGED TO OUNCES BY ADECIMAL POINT APPEARING IN THE LEDUNTIL THE BALANCER IS UNPLUGGED, IT WILL REMAIN IN EITHER GRAMS OROUNCES, DEPENDING ON YOUR PREFERENCE.BUTTON REFERENCE
Page 1 and 2: IMPORTANTDOCUMENT!QUICK START GUIDE
Page 3 and 4: PAGE 2:PAGE 3-5:PAGE 6-8:PAGE 9:PAG
Page 5 and 6: SETTING UP AUTOMATIC DATA ENTRYA. B
Page 7 and 8: THE SHAFT SO THAT THE WHEEL IS FIRM
Page 9: 3. NEXT, RAISE THE HOOD AND ATTACH

IMPORTANT DOCUMENT!

Create successful ePaper yourself

Delete template?

Save as template?