DURO PRICE LIST 10 internal pages V6 USE.indd

DURO PRODUCTS 

2011 PRODUCT GUIDE & PRICE LIST

INTRODUCTION 

02 

Welcome to the 2011 DURO product guide and price list. In short 

this is the most comprehensive range of products we have ever 

offered, with most ranges being expanded or upgraded and many 

completely new product lines have been introduced. 

A point we would like to draw your attention to is the addition 

of several new HDF Technology diamond blades within our DURO 

Plus and Ultra lines. 

HDF Technology (High Density Forging) is a patented forged 

diamond segment manufacturing process, which offers significant 

increases in tool life and speed of cut due to it’s incredibly high 

segment matrix density. 

This also brings an improvement improvement in laser welding strength that is nothing nothing short of astounding. 

In recent independent tests using X-ray imaging it has been found to all but completely remove 

porosity from the welding zone, which is an age old industry issue. You can see these products 

marked throughout the catalogue and each blade has one segment with the DURO logo stamped into it. 

All our diamond products have been fully updated now to meet or exceed the new 2011 

EN13236 standard. 

Listed below are the new or upgraded DURO products to look out for in 2011; 

• HDF Technology blades – Pages 10 to 14 

• Vacuum brazed multi-use and rescue blades – Page 20 

• DURO Plus dry core drills and kits – Pages 24 to 25 

• DURO Plus cup grinders in new formats and packaging – Page 30 

• DURO Plus Sabre saw blades for multiple materials - Page 36 

• Multi-use circular saw blades for wood and non-ferrous metals – Pages 38 to 40 

• A full range of high performance breaker steels, chisels & points – Pages 55 to 62 

Why not visit our website for a full and comprehensive guide to our 

product range and also a wide range of product videos to be viewed. 

www.duro-diamonds.com 

These are also available on YouTube - we have our very own video store. 

Our products all comply with the relevant EN European Standards and are manufactured in accordance 

with ISO 9000. DURO UK Ltd is an ISO 9001 registered Firm. 

Our office ours are; Monday to Thursday: 8.30am – 5.00pm Friday: 8.30am – 4.00pm

DURO BRANDS 

SELECTING THE RIGHT PERFORMANCE LEVEL FOR YOU 

In selecting a DURO tool, you will benefit from industry leading cost to 

performance ratios. To be sure you get exactly the right tool for your 

needs, we offer four clearly defined performance levels. 

The Top-Line from DURO, where maximum performance is the only consideration 

during the product design process. The very best quality raw materials are utilised 

to ensure the highest possible output. 

The Pro-Line from DURO, offering professional level tools at very competitive price 

levels. This range is renowned for offering great quality, performance and value tools 

with very high output. 

The Standard-Line from DURO, with a broad product range and many tools 

offering performance levels well above industry standard, the output of these 

tools is very good. 

The Entry-Line from DURO, where price and performance are matched 

to offer great value output throughout the range. 

03

INDEX 

PRODUCTS, MARKETING & TECHNICAL 

04 

02 

03 

06 

08 

09 

10 

11 

12 

13 

14 

16 

18 

20 

22 

24 

25 

26 

27 

28 

30 

32 

INTRODUCTION 

DURO BRANDS 

ESSENTIAL SELECTION 

DIAMOND BLADES: BLADE APPLICATION GUIDE 

DIAMOND BLADES: HARD MATERIALS 

DIAMOND BLADES: UNIVERSAL CONCRETE & BUILDING MATERIALS 

DIAMOND BLADES: CONSTRUCTION MATERIALS 

DIAMOND BLADES: ASPHALT & ABRASIVE MATERIALS 

DIAMOND BLADES: MULTIPLE APPLICATIONS - CONSTRUCTION 

DIAMOND BLADES: MULTIPLE APPLICATIONS - CIVIL ENGINEERING 

GENERAL ACCESSORIES: DUST SUPPRESSION / EYE GLASS 

MORTAR RAKERS: MORTAR RAKING BLADES & CORES 

VACUUM BRAZED BLADES: CONSTRUCTION MATERIALS & RESCUE 

SPECIAL APPLICATIONS: RING / LOOPING / BRICK BLADES 

DIAMOND CORE DRILLS: DRY DIAMOND CORE DRILLS 

DIAMOND CORE DRILLS: DRY DIAMOND CORE DRILL KITS 

DIAMOND CORE DRILLS: DRY CORE DRILL ACCESSORIES 

DIAMOND CORE DRILLS: WET DIAMOND CORE DRILLS 

DIAMOND CORE DRILLS: WET CORE DRILL ACCESSORIES 

DIAMOND GRINDERS: CUP & FLOOR GRINDERS 

CONCAVE DIAMOND BLADES: CURVED CUTTING

INDEX 

PRODUCTS, MARKETING & TECHNICAL 

34 

36 

38 

40 

42 

43 

44 

46 

48 

50 

52 

56 

57 

59 

61 

62 

64 

68 

69 

70 

72 

77 

79 

CARBIDE RIPPA BLADES: MULTI-USE 

SABRE SAW BLADES: MULTI-USE 

CIRCULAR SAW BLADES: WOOD 

CIRCULAR SAW BLADES: METALS & PLASTICS 

DIAMOND TILE DRILLS : VERY HARD TILES / GRANITE / GLASS 

DIAMOND HOLE SAWS: MULTI-PURPOSE 

DIAMOND TILE DRILLS & HOLE SAWS: ACCESSORIES 

DIAMOND TILE BLADES: PORCELAIN & CERAMIC 

HAMMER DRILLS: SDS PLUS 

HAMMER DRILLS: SDS MAX 

SDS PLUS CHISELS: POINTS / CHISELS & INNOVATIONS 

SDS MAX CHISELS: MULTI-USE 

SDS MAX BREAKER STEELS: MULTI-USE 

GENERAL BREAKER STEELS: PNEUMATIC 

GENERAL BREAKER STEELS: ELECTRIC 

GENERAL BREAKER STEELS: ELECTRIC ACCESSORIES 

ABRASIVE DISCS: STEEL & INOX / STEEL 

66 ABRASIVE DISCS: STONE 

MERCHANDISING 

PRODUCT SUPPORT 

DURO SUPPORT 

PROMOTIONS 

73 TECHNICAL INFORMATION: SPEEDS / APPLICATIONS 

PRODUCT IDENTIFICATION: LABELING / ETCHING 

TERMS & CONDITIONS OF SALE 

05

SAVE MONEY 

WITH THE 

ESSENTIAL 

SELECTION 

FROM DURO! 

Throughout this catalogue you will see 

a number of products marked with the 

Essential Selection logo. 

These products represent 

some of our most popular 

and fastest moving items 

and are now available to 

you with new special lower 

prices linked to volume 

purchases. 

The range covers blades, drills and dust 

suppression tanks. So if you have a large requirement 

for certain items maybe we can help you save money 

and increase profitability by buying in bulk. 

These products are also packaged in special livery to show more product application 

and technical information for the end user. 

If you would like to know more, then please contact your DURO Area Sales Manager 

for details of the Essential Selection range and what we can do to support you in 

saving money when placing your next order. 

The Essential Selection from DURO.

DIAMOND BLADES 

HARD MATERIALS 

UNIVERSAL CONCRETE & BUILDING MATERIALS 

CONSTRUCTION MATERIALS 

ASPHALT & ABRASIVE MATERIALS 

MULTIPLE APPLICATIONS - CONSTRUCTION 

MULTIPLE APPLICATIONS - CIVIL ENGINEERING

APPLICATIONS 

08 

APPLICATION SELECTION BY COLOUR CODING 

All DURO diamond blades (except DURO BASE) have a colour 

coded section on the label to match the material application type. 

Please ensure that your blade selection matches the material 

you intend to cut. 


White colour indicates highly dense and very hard materials such as granite, slate, Class A engineering 

bricks, clay products, flint concrete, heavily reinforced concrete. 

UNIVERSAL/CONCRETE 

Grey colour indicates universal use in most hard to medium hard materials such as reinforced concrete, 

Class B engineering bricks, kerbs, lintels, beams, cast pipes, flags and general building materials. 


Yellow indicates that this product is designed to give the longest lifetimes with high 

in-feed rates in the widest possible range of construction materials, from the hardest engineering bricks 

and reinforced concretes to paviors, soft blocks and roof tiles - and even the ability to occasionally cut 

asphalt - all in one blade. 

ABRASIVE MATERIALS 

Pale Blue indicates abrasive materials such as, hand made bricks, facing bricks, concrete roof tiles, soft 

concrete paviors, green concrete, cement screed and other abrasive materials. 

ASPHALT 

Black indicates extremely abrasive materials such as, soft cement screed, lightweight concrete and 

cellular block, abrasive sandstone and grit stone, as well as tarmac and hot rolled asphalt on roads and 

pavements. 

METAL / STONE 

Red indicates that this product is designed for cutting more or less anything on the construction site 

including, but not exclusively, various types of metal. The special shape, with air cooling holes drilled into 

the steel core, coupled with the use of a very large diamond grit, allows these blades to cross the barrier 

in diamond technology and eliminate the need for changing blades when it is necessary to cut metal. 

CONCRETE ASPHALT 

The use of both grey and black indicates that this product is highly suited to both concrete and asphalt 

applications. Either application is possible exclusively or jointly, with similar results. The use of high quality 

diamond grit in a high concentration makes this product performance outstanding at the price level. 

ASPHALT CONCRETE HARD MATERIALS METALS 

The use of four colour codes makes this specification our most universal. Cut almost any material, 

excluding heavy metal applications (above 10mm gauge) with absolute ease and security, whilst 

benefiting from very high life times. The use of titanium coated diamond and high density bonds, coupled 

with innovative design features, including deep draft segments and cooling holes in the steel core put this 

product on the very highest level of performance. 

BUILDING MATERIALS 

This is the application type of our DURO BASE entry line blades and this indicates that the blades are 

suitable for universal use in most medium to hard building materials, including lightly reinforced concrete, 

medium hard bricks, blocks and stones.



BRAND 

(4½”) 115 x 22.2 £30.00 

(5”) 125 x 22.2 £33.00 

(9”) 230 x 22.2 £65.00 

(12”) 300 x 20.0 £195.00 £115.00 

(14”) 350 x 20.0 £240.00 

DIAMOND BLADE: DUH 

SEGMENT HEIGHT: 10MM 

DRY/WET: BOTH 

SEGMENT TYPE: SEGMENTED 

NARROW GULLET 

VENTILATION: NO 

CORE PROTECTION: SILENCED CORE 

DIAMOND BLADE: DPH 


DRY/WET: BOTH 

SEGMENT TYPE: CONTINUOUS 

TURBO RIM 

VENTILATION: YES 

CORE PROTECTION: NO 

DIMENSIONS DUH DPH 

(14”) 350 x 25.4 £155.00 

(18”) 450 x 25.4 £248.00 

ORDER LINE: 01909 552470 

DESCRIPTION: 


A laser welded, silent centred blade with 

narrow gullet design to avoid chipping. 

Very fast cutting with long life. 

09 

APPLICATIONS: 

• Indian stone • Granite • Engineering bricks 

• Clay products • Reinforced concrete 

• Bricks • Concrete products 

DESCRIPTION: 


A dry cutting blade with continuous turbo 

rim design to avoid chipping and special 

cooling holes. Fast cutting with good life. 

APPLICATIONS: 

• Indian stone • Granite • Engineering bricks 

• Clay products • Reinforced concrete 

• Bricks • Concrete products 

450mm is segmented not continuous rim


UNIVERSAL CONCRETE & BUILDING MATERIALS 


BRAND 

*Product change will happen during 2011 

DIAMOND BLADE: DUU/C* 

SEGMENT HEIGHT: 13MM 

DRY/WET: BOTH 

SEGMENT TYPE: NARROW GULLET 

- CONICAL SEGMENTED 



DIAMOND BLADE: DPU/C 


DRY/WET: BOTH 

SEGMENT TYPE: NARROW GULLET 

- CONICAL SEGMENTED 



DIAMOND BLADE: DU/C* 


DRY/WET: BOTH 


KEY HOLE GULLET 



DIAMOND BLADE: DSBM 

SEGMENT HEIGHT: 8MM/10MM 

DRY/WET: BOTH 


KEY HOLE GULLET 



ORDER LINE: 01909 552470 

DESCRIPTION: 

UNIVERSAL CONCRETE 

A laser welded blade with patented high 

density forging technology. Narrow gullet 

design to aid cooling. Very fast cutting with 

a long product life. 

APPLICATIONS: 

• Class A Engineering bricks • Clay products 

• Heavily reinforced concrete • Bricks 

• Concrete kerbs / Beams / Lintels & Flags 

• Facing bricks 

• General purpose 

DESCRIPTION: 




design to aid cooling. Fast cutting with 

good life. 

APPLICATIONS: 

• Class B Engineering bricks 

• Medium reinforced concrete 

• Bricks 

• Concrete Kerbs / Beams / Lintels & Flags 

• Facing bricks • General Purpose 

DESCRIPTION: 


A dry cutting blade with key hole gullet 

design. Good speed of cut and life. 

APPLICATIONS: 

• Hard bricks • Lightly reinforced concrete 


• Facing bricks • General purpose 

DESCRIPTION: 

BUILDING MATERIALS 

A dry cutting blade with key hole gullet 

design. Good speed of cut and life. 

300DSBM-10 features a 10mm segment 

height. 

APPLICATIONS: 

• Hard bricks • Lightly reinforced concrete 


• Facing bricks • General purpose 

DIMENSIONS DUU/C DPU/C DU/C DSBM 

(4½”) 115 x 22.2 £30.00 £10.00 £6.50 

(5”) 125 x 22.2 £33.00 £11.00 £7.50 

(9”) 230 x 22.2 £65.00 £23.00 £16.50 

(12”) 300 x 20.0 £172.00 £115.00 £50.00 £32.00 

(12”) 300 x 20.0 (DSBM-10) £40.00 

(14”) 350 x 20.0 £220.00 £155.00 

(14”) 350 x 25.4 £220.00 £155.00 £65.00 

(16”) 400 x 25.4 £305.00 £208.00 

(18”) 450 x 25.4 £415.00 £248.00 

(20”) 500 x 25.4 £300.00 

(24”) 600 x 25.4 £965.00



BRAND 

DIAMOND BLADE: DUSCM SHOXX* 


DRY/WET: BOTH 

SEGMENT TYPE: 30° GULLET 

SHOXX CONICAL SEGMENTED 

VENTILATION: YES, 230MM ONLY 

CORE PROTECTION: YES 

DIAMOND BLADE: DPCM 


DRY/WET: BOTH 


TURBO SEGMENTED 



DIAMOND BLADE: DCM* 


DRY/WET: BOTH 


TURBO SEGMENTED 



DIMENSIONS DUSCM DPCM DCM 

(4½”) 115 x 22.2 £ 18.00 

(9”) 230 x 22.2 £155.00 £65.00 £40.00 

(12”) 300 x 20.0 £195.00 £122.00 £70.00 

(14”) 350 x 20.0 £400.00 £162.00 

(14”) 350 x 25.4 £400.00 


ORDER LINE: 01909 552470 

11 

DESCRIPTION: 


A Patented forged technology, laser welded 

blade with a 30-degree in-line gullet design 

to reduce vibration. A worlds first. Incredibly 

fast cutting with market leading product life. 

APPLICATIONS: 

• Indian stone • Granite • Clay products 

• Class A Engineering bricks 

• All reinforced concrete types • Bricks 

• Concrete Kerbs / Beams / Lintels & Flags. 

DUSCM has the lowest vibration levels ever 

recorded at OPERC 

DESCRIPTION: 


A laser welded blade with a 30-degree 

gullet design. Fast cutting with long life. 

APPLICATIONS: 

• Hard bricks • Clay products 

• All reinforced concrete types 

• House bricks • Abrasive materials 


• Occasional use in asphalt. 

DESCRIPTION: 


A dry cutting blade with a 30-degree 

gullet design. Good speed of cut and life. 

APPLICATIONS: 

• Hard bricks 


• House bricks • Abrasive materials 


• Occasional use in asphalt.


ASPHALT & ABRASIVE MATERIALS 

12 

BRAND 

DIMENSIONS DUA DPA DPAB DA 

(4½”) 115 x 22.2 £30.00 

(5”) 125 x 22.2 £33.00 

(9”) 230 x 22.2 £65.00 

(12”) 300 x 20.0 £172.00 £115.00 £115.00 £70.00 

(14”) 350 x 25.4 £220.00 £155.00 £155.00 £85.00 

(18”) 450 x 25.4 £415.00 £248.00 

(24”) 600 x 25.4 £965.00 


DIAMOND BLADE: DUA* 


DRY/WET: BOTH 

SEGMENT TYPE: WIDE GULLET 

3 DEEP DRAFT SEGMENTS 


CORE PROTECTION: YES - DOUBLE 

DIAMOND BLADE: DPA* 


DRY/WET: BOTH 





DIAMOND BLADE: DPAB 


DRY/WET: BOTH 


WIDE GULLET 



DIAMOND BLADE: DA* 


DRY/WET: BOTH 


INCLINED WEDGE SEGMENT 



ORDER LINE: 01909 552470 

DESCRIPTION: 

ASPHALT 


density forging technology. Conical segment 

design with 3x deep draft segments to 

prevent under-cutting. Very long life. 

APPLICATIONS: 

• Soft concrete paviors • Abrasive blocks 

• Cement screed • Grit stone • Asphalt 

DESCRIPTION: 

ASPHALT 


density forging technology. Conical segment 

design with 3x deep draft segments to 

prevent under-cutting. Long life. 

APPLICATIONS: 



DESCRIPTION: 

ABRASIVE MATERIALS 

A laser welded blade with wide gullet 

design to aid cooling. Long life. 

APPLICATIONS: 

• Concrete roof tiles 

• Sand based block paviors 



DESCRIPTION: 

ASPHALT 

A laser welded blade with inclined wedge 

segment design to prevent under-cutting. 

Good life. 

APPLICATIONS: 

• Soft abrasive paviors • Abrasive blocks 

• Cement screed • Grit stone • Asphalt


MULTIPLE APPLICATIONS - CONSTRUCTION 

BRAND 

DIAMOND BLADE: DUM+S 


DRY/WET: BOTH 


NARROW KEYHOLE GULLET 



DIAMOND BLADE: DPCM-T 


DRY/WET: BOTH 


TURBO RIM 



DIAMOND BLADE: DCM-T 


DRY/WET: BOTH 


TURBO RIM 



DIMENSIONS DUM+S DPCM-T DCM-T 

(4½”) 115 x 22.2 £30.00 £18.00 

(5”) 125 x 22.2 £33.00 

(9”) 230 x 22.2 £98.00 £65.00 £40.00 

(12”) 300 x 20.0 £172.00 £122.00 £70.00 

(14”) 350 x 20.0 £220.00 £162.00 

ORDER LINE: 01909 552470 

13 

DESCRIPTION: 

METAL & STONE 

A specially designed blade for metal and 

very hard stone applications. Incredibly fast 

cutting with good life. 

APPLICATIONS: 

• Indian stone • Granite 



• Ferrous metal sections up to 10mm gauge 

• Steel & Iron 

DESCRIPTION: 

CONSTRUCTION MATERIALS & METAL 

A turbo rim blade with special cooling holes 

and a reinforced flange centre for increased 

stability. Fast cutting with long life. 

APPLICATIONS: 

• Indian stone • Granite • House Bricks 



• Ferrous metal sections up to 5mm gauge 

• Concrete, kerbs / beams / lintels & flags 

• Occasional use in asphalt & abrasive materials 

DESCRIPTION: 

CONSTRUCTION MATERIALS & METAL 

A turbo rim blade with special cooling holes. 

Good cutting speed and life. 

APPLICATIONS: 

• Indian stone • Granite • House Bricks 




• Concrete, kerbs / beams / lintels & flags 

• Occasional use in asphalt & abrasive materials


MULTIPLE APPLICATIONS - CIVIL ENGINEERING 

14 

BRAND 

DIAMOND BLADE: DUA/C* 


DRY/WET: BOTH 

SEGMENT TYPE: KEYHOLE GULLET 




DIAMOND BLADE: DPA/C 


DRY/WET: BOTH 





DIAMOND BLADE: DA/C 


DRY/WET: BOTH 


WIDE GULLET 



DIMENSIONS DUA/C DPA/C DA/C 

(12”) 300 x 20.0 £195.00 £122.00 £80.00 

(14”) 350 x 25.4 £240.00 £162.00 £105.00 

(16”) 400 x 20.0 £330.00 

(18”) 450 x 25.4 £430.00 £260.00 


ORDER LINE: 01909 552470 

DESCRIPTION: 

CONCRETE/ASPHALT/METAL/ 




design with conical segments. Very fast 

cutting with very long life. 

APPLICATIONS: 

• Indian stone • Class A Engineering bricks 

• Clay products • All reinforced concrete types 


• Steel & Iron • Hard bricks 

• House bricks • Abrasive materials • Asphalt 

• Concrete kerbs / beams / lintels and flags. 

DESCRIPTION: 

CONCRETE & ASPHALT 


density forging technology. Wide gullet 

design with conical segments. Fast cutting 

with a long life. 

APPLICATIONS: 

• Indian stone • Class A Engineering bricks 

• Clay products • All reinforced concrete types 

• Granite • Hard bricks 

• House bricks • Abrasive materials • Asphalt 

• Concrete kerbs / beams / lintels and flags. 

DESCRIPTION: 

CONCRETE & ASPHALT 

A laser welded blade with a wide gullet 

design and 3 special inclined segments for 

undercutting protection. Good speed of 

cut and life. 

APPLICATIONS: 

• Class B Engineering bricks • Clay products 

• All reinforced concrete types • House bricks 

• Abrasive materials • Asphalt • Hard bricks 

• Concrete kerbs / beams / lintels and flags.

GENERAL ACCESSORIES 

DUST SUPPRESSION TANK 

BRASS HOSE CONNECTOR 

DIAMOND BLADE EYE GLASS 

REDUCING BUSHES / REBORING

GENERAL ACCESSORIES 

16 

DUST SUPPRESSION TANK: DT91134 

DESCRIPTION: 

Made from reinforced nylon, this 

one-piece 13 litre tank is available 

complete with standard “hose 

lock” fittings or can be specified 

with solid brass fittings to further 

increase the life of the tank. 

DUST SUPPRESSION TANK ACCESSORY: BRASS CONNECTOR 

DESCRIPTION: 

A solid brass fitting can be 

added to the DT91134 in our 

works to extend the life of each 

tank. 

DIAMOND BLADE ACCESSORY: EYE GLASS 

DESCRIPTION: 

Diamond blade segment eye 

glass for measuring wear 

rates and segment inspection. 

Durable steel construction, 

capable of measuring up 

to 25.00mm in 1.00mm 

increments. 

DIAMOND BLADE ACCESSORY: BUSHES / RE-BORING 

DESCRIPTION: 

All our blades can be either 

bushed to reduce the bore or 

bored out to increase the bore 

to suit your requirements. 

BRAND 

ORDER LINE: 01909 552470 

APPLICATIONS: 

Used to suppress the creation of dust 

from hand held saws in all working 

environments. 

DESCRIPTION ACCESSORIES DT91134 

DESCRIPTION ACCESSORIES 

EYE GLASS £35.00 

BUSHES £11.50 

RE-BORING £14.30 

APPLICATIONS: 

Standard Hose-Lock type fitting for all 

machine types. 

APPLICATIONS: 

For measuring wear rates and segment 

inspection. 

APPLICATIONS: 

Bore sizes of 15.00 (cup grinders only), 

16.00, 20.00, 22.25, 25.4 & 30.00mm 

can be achieved. 

13 LITRE CAPACITY WATER TANK £94.00 

BRASS CONNECTOR £12.00 

DT91134 SERVICE KIT (INCLUDES PUMP & SEALS) £38.00 

DT91134 INTERNAL HOSE KIT £20.00 

DT91134 EXTERNAL HOSE KIT £42.00

MORTAR RAKERS 

DIAMOND MORTAR RAKING BLADES 

CARBIDE MORTAR RAKING CORES ADAPTORS

MORTAR RAKERS 

18 

BRAND 

DIAMOND MORTAR RAKER: DPM 


DRY/WET: BOTH 




DIAMOND MORTAR RAKER: DM 


DRY/WET: BOTH 




DIAMOND MORTAR RAKER: DSM 


DRY/WET: BOTH 




CHISEL: DP-SDS-MRCORE 

SHANK STYLE: SDS PLUS (adaptor) 

ACTION: ROTARY ONLY 

HEAD TYPE: BRAZED 

CARBIDE GRIT 

DUST EXTRACTION: YES 

BODY STYLE: CORE 

ORDER LINE: 01909 552470 

DESCRIPTION: 

MORTAR 

A 6mm thick laser welded blade with 

special inserts for undercutting protection. 

Very fast cutting with a very long tool life. 

APPLICATIONS: 

All types of hard and abrasive mortar. 

DESCRIPTION: 

MORTAR 

A 6mm thick blade. Fast cutting with a 

long life. 

APPLICATIONS: 


DESCRIPTION: 

MORTAR 

A 6mm thick blade. Good speed of cut 

and life. 

APPLICATIONS: 


DESCRIPTION: 

MORTAR RAKING CORES 

Virtually dust free mortar removal. Controllable 

due to being used on SDS plus power tool 

(lower RPM to angle grinders) Irregular braze 

pattern carbide grit for rapid mortar removal. 

APPLICATIONS: 

All types of mortar and all depths of mortar. 

Available in 6.5mm, 8.0mm and 

10.0mm diameter with 

drive adaptor with 

incorporated vacuum nozzle. 

DIMENSIONS DP-SDS-MRCORE DPM DM DSM 

(4½”) 115 x 6.0 x 22.2 £102.00 £30.00 £22.00 

(5”) 125 x 6.0 x 22.2 £112.00 £35.00 £24.00 

6.5mm Core £12.04 

8.0mm Core £12.71 

10.0mm Core £13.38 

Core Drive Adaptor £52.35 

Core Kit (6.5, 8.0, 10.0mm £129.90 

cores, core adaptor and 

mortar raking chisel)

VACUUM BRAZED 

DIAMOND BLADES

VACUUM BRAZED 


20 

BRAND 

VACUUM BRAZED DIAMOND BLADE: DPVB 

SEGMENT HEIGHT: N/A 

DRY/WET: BOTH 

SEGMENT TYPE: DOUBLE 

SEGMENTED 



DIMENSIONS DPVB 

(4½”) 115 x 1.6 x 22.2 £35.00 

(5”) 125 x 1.6 x 22.2 £38.00 

(7”) 180 x 1.6 x 22.2 £65.00 

(9”) 230 x 1.6 x 22.2 £80.00 

(12”) 300 x 2.2 x 20.0 £122.00 

(14”) 350 x 2.2 x 20.0 £162.00 

ORDER LINE: 01909 552470 

DESCRIPTION: 

CONSTRUCTION MATERIALS & RESCUE 

Double segmented, vacuum brazed 

diamond blade. Special vacuum process 

directly coats the blade with diamonds 

giving universal cutting properties. 

APPLICATIONS: 

Concrete, reinforced concrete, concrete 

with exposed aggregate, paving, Indian 

stone, quarry slabs, granite slabs & bricks. 

Cast iron, sheet metals, non-ferrous metals, 

ducting. 

Plastics, glass, fibreglass, rubber, wood, 

carbon fibre.

SPECIAL APPLICATIONS 

DIAMOND RING SAW BLADES 

DIAMOND BRICK CUTTING BLADES 

DIAMOND LOOPING BLADES

SPECIAL APPLICATIONS 

22 

BRAND 

(14”) 350 £255.00 

RING SAW BLADE: DU-RING 


DRY/WET: BOTH 

SEGMENT TYPE: N/A 

VENTILATION: N/A 

CORE PROTECTION: N/A 

LOOPING BLADE: DUU/C-LOOP 


DRY/WET: WET 


NARROW GULLET 



BRICK CUTTING BLADE: DUHB 


DRY/WET: WET 


NARROW GULLET 



BRICK CUTTING BLADE: DPHB 


DRY/WET: WET 


NARROW GULLET 



DIMENSIONS DU-RING DUU/C-LOOP DUHB DPHB 

(14”) 350 x 25.4 £250.00 £162.00 

(18”) 450 x 25.4 £350.00 £260.00 

(14”) 350 x 8.0 x 25.4 £475.00 

(14”) 350 x 10.0 x 25.4 £510.00 

(14”) 350 x 12.0 x 25.4 £585.00 

ORDER LINE: 01909 552470 

DESCRIPTION: 

UNIVERSAL 

350mm laser welded ring for use on 

Partner / Husqvarna K3600. Drive wheel 

included. 

APPLICATIONS: 

Universal applications in concrete 

and building materials. 

DESCRIPTION: 

ASPHALT & CONCRETE 

Blade is laser welded with a high 

performance bond system and available 

in 3 widths (8.0, 10.0 and 12.0mm) Top 

performance. 

APPLICATIONS: 

All types of concrete, asphalt and asphalt 

over concrete. 

DESCRIPTION: 

HARD BRICK 

Blade is laser welded with a narrow gullet 

design to prevent surface damage to the 

brick. Top performance with a long life 

time. . 

APPLICATIONS: 

Hard cast and fired bricks of all types 

including clay and class A engineering 

bricks. 

DESCRIPTION: 

HARD BRICK 

Blade is laser welded with a narrow gullet 

design to prevent surface damage to the 

brick. 

APPLICATIONS: 

Hard cast and fired bricks of all types 

including clay and class A engineering 

bricks.

DIAMOND CORE DRILLS 

DRY DIAMOND CORES 

WET DIAMOND CORES 

ACCESSORIES


DRY DIAMOND CORE DRILLS 

24 

BRAND 

DIAMOND CORE: DPDC 


DRY/WET: DRY 


TURBO/ROOF TOP 


CORE PROTECTION: YES, SPIRAL 

DIAMOND CORE: DDC 


DRY/WET: DRY 




DIAMOND CORE: DSDC 


DRY/WET: DRY 




ORDER LINE: 01909 552470 

DESCRIPTION: 

BRICK/BLOCK/CONCRETE 

A range of Pro-Line, laser welded dry 

core drills for use on 800watt and above 

machines without impact. Slots in the side 

of the barrel clear debris in use. 

APPLICATIONS: 

Hard bricks, blocks and concrete even 

with light reinforcement (5mm bar). 

Medium hard brick and block. 

DESCRIPTION: 

BRICK & BLOCK 

A range of Standard-Line dry core drills 

for use on 800watt and above machines 

without impact. Slots in the side of the 

barrel clear debris in use. 

APPLICATIONS: 


DESCRIPTION: 

BRICK & BLOCK 

An Entry-Level range of dry core drills for 

use on 800watt and above machines 

without impact. Slots in the side of the 

barrel clear debris in use. 

APPLICATIONS: 


DIMENSIONS DPDC DDC DSDC 

22 x 300 x SW12 (HEX) £68.00 

28 x 300 x SW12 (HEX) £68.00 £37.00 £25.00 

32 x 150 x R½” £69.00 

38 x 150 x R½” £70.00 £39.00 £25.00 

42 x 150 x R½” £71.00 £40.00 £28.00 

48 x 150 x R½” £78.00 

52 x 150 x R½” £80.00 £43.00 £35.00 

65 x 150 x R½” £88.00 £48.00 £38.00 

78 x 150 x R½” £94.00 £53.00 £42.00 

92 x 150 x R½” £102.00 

102 x 150 x R½” £108.00 

107 x 150 x R½” £118.00 £66.00 £54.00 

117 x 150 x R½” £124.00 £69.00 £56.00 

127 x 150 x R½” £126.00 £77.00 £60.00 

152 x 150 x R½” £132.00 £84.00 £66.00 

158 x 150 x R½” £149.00 

162 x 150 x R½” £165.00 £99.00 £86.00 

175 x 150 x R½” £172.00


DRY DIAMOND CORE DRILL KITS 

BRAND 

DIAMOND CORE: DPDC-KIT 


DRY/WET: DRY 


TURBO/ROOF TOP 


CORE PROTECTION: YES, SPIRAL 

DIAMOND CORE: DSDC-KIT 


DRY/WET: DRY 




ORDER LINE: 01909 552470 

DESCRIPTION: 

KITS 

Available as a 5 piece in PLUS specification-for 

professional users seeking optimum performance 

APPLICATIONS: 

Hard bricks, blocks and concrete even 

with light reinforcement (5mm bar). 

Medium hard brick and block.. 

In addition - the kit includes: 

Chuck adaptor, SDS Adaptor, Universal 

Extension, Guide Rod, Drift Key and a 

350mm long Masonry Bit 

25 

DESCRIPTION: 

KITS 

Available as a 3 piece or 5 piece variant in 

BASE specification - the kits are perfect for 

the tradesmen who use dry drills regularly. 

APPLICATIONS: 


In addition - the kit includes: 

Chuck adaptor, SDS Adaptor, Universal 

Extension, Guide Rod, Drift Key and a 

350mm long Masonry Bit 

DIMENSIONS DPDC DSDC 

3 Pc Kit (42, 52 & 117) £127.00 

5 Pc Kit (42, 52, 65, 117 & 127) £310.00 £203.00


DRY CORE DRILL ACCESSORIES 

26 

DRY ACCESSORIES 

DIAMOND CORE ACCESSORIES: DRY 

DESCRIPTION: DURO PLUS 

A range of quality accessories made 

from premium grade tool steels for 

maximum strength and durability. 

Made in the U.K. 

DESCRIPTION: DURO STANDARD 

A range of good quality dry core 

accessories made from tool grade 

steels. 

ORDER LINE: 01909 552470 

APPLICATIONS: 

Dry core drill adaptors that allow the 

use of core drills on a variety of different 

machine types and allow you to extend 

the reach of the core drills. 

CA DP-CA SA DP-SA GR A-TAPER 

PILOT 

EXT3 DP-EXT3 DD100AM 

DESCRIPTION - DRY ACCESSORIES REFERENCE DRY DRY 

3 JAW ADAPTOR PACK 

(ADAPTOR, GUIDE ROD, DRIFT KEY) 

CAP £19.00 

DURO PLUS 3 JAW ADAPTOR PACK 


DP-CAP £24.00 

3 JAW ADAPTOR CA £17.00 

DURO PLUS 3 JAW ADAPTOR DP-CA £20.00 

SDS ADAPTOR PACK 


SAP £23.00 

DURO PLUS SDS ADAPTOR PACK 


DP-SAP £28.00 

SDS ADAPTOR SA £21.00 

DURO PLUS SDS ADAPTOR DP-SA £25.00 

UNIVERSAL GUIDE ROD GR £6.00 

DURO PLUS UNIVERSAL GUIDE ROD DP-GR £9.00 

DRIFT KEY DK £4.00 

200MM EXTENSION ½” BSP (F) - ½” BSP (M) 

WITH ‘A’ TAPER INTERNAL 

EXT3 £28.00 

DURO PLUS 200MM EXTENSION ½” BSP (F) - ½” BSP (M) 

WITH ‘A’ TAPER INTERNAL 

DP-EXT3 £34.00 

3 JAW 13 X 400MM MASONRY DRILL MD £13.00 

SDS 13 X 400MM MASONRY DRILL SMD £18.00 

½” BSP (M) DRY CORE ADAPTOR FOR HILTI DD100 DD100A-M £70.00 

A-TAPER PILOT DRILL - 13 X 250MM 13X250-ATAPER-P £9.05 

BRAND 

APPLICATIONS: 

Adaptors that allow the use of core 

drills on a variety of different machine 

types and allow you to extend the 

reach of the core drills.


WET DIAMOND CORES 

BRAND 

DIAMOND CORE: DPWC 


DRY/WET: WET 

SEGMENT TYPE: CROWN UP TO 

42MM THEN SEGMENTED 

VENTILATION: WATER COOLED 


DIMENSIONS DPWC - CROWN DPWC - SEGMENTED 

10 x 150 x ½” BSP (M) £58.00 

12 x 150 x ½” BSP (M) £60.00 

14 x 150 x ½” BSP (M) £61.00 

16 x 300 x ½” BSP (M) £63.00 

18 x 300 x ½” BSP (M) £64.00 

20 x 300 x ½” BSP (M) £66.00 

22 x 300 x ½” BSP (M) £70.00 

24 x 300 x ½” BSP (M) £72.00 

25 x 300 x ½” BSP (M) £73.00 

28 x 300 x ½” BSP (M) £74.00 

30 x 300 x ½” BSP (M) £76.00 

32 x 300 x ½” BSP (M) £79.00 

35 x 300 x ½” BSP (M) £82.00 

38 x 400 x ½” BSP (M) £85.00 

40 x 400 x ½” BSP (M) £96.00 

42 x 400 x ½” BSP (M) £97.00 

47 x 400 x ½” BSP (M) £107.00 

52 x 400 x ½” BSP (M) £109.00 

52 x 450 x 11/4 ” UNC (F) £111.00 

62 x 450 x 11/4 ” UNC (F) £123.00 

67 x 450 x 11/4 ” UNC (F) £131.00 

77 x 450 x 11/4 ” UNC (F) £148.00 

82 x 450 x 11/4 ” UNC (F) £157.00 

92 x 450 x 11/4 ” UNC (F) £176.00 

102 x 450 x 11/4 ” UNC (F) £185.00 

107 x 450 x 11/4 ” UNC (F) £196.00 

112 x 450 x 11/4 ” UNC (F) £206.00 

122 x 450 x 11/4 ” UNC (F) £223.00 

127 x 450 x 11/4 ” UNC (F) £237.00 

132 x 450 x 11/4 ” UNC (F) £246.00 

142 x 450 x 11/4 ” UNC (F) £281.00 

152 x 450 x 11/4 ” UNC (F) £295.00 

162 x 450 x 11/4 ” UNC (F) £313.00 

172 x 450 x 11/4 ” UNC (F) £348.00 

182 x 450 x 11/4 ” UNC (F) £368.00 

202 x 450 x 11/4 ” UNC (F) £382.00 

212 x 450 x 11/4 ” UNC (F) £469.00 

225 x 450 x 11/4 ” UNC (F) £478.00 

250 x 450 x 11/4 ” UNC (F) £517.00 

300 x 450 x 11/4 ” UNC (F) £659.00 

350 x 450 x 11/4 ” UNC (F) £750.00 

400 x 450 x 11/4 ” UNC (F) £896.00 

450 x 450 x 11/4 ” UNC (F) £939.00 

500 x 450 x 11/4 ” UNC (F) £1111.00 

ORDER LINE: 01909 552470 

27 

DESCRIPTION: 

CONCRETE 

A range of professional wet diamond cores 

for high speed drilling and long useful 

life times. 

APPLICATIONS: 

Reinforced and non-reinforced concrete, 

plus hard brick and block. 

Shorter and longer length wet cores are 

available in addition to the list below.


WET CORE DRILL ACCESSORIES 

28 

WET ACCESSORIES 

DIAMOND CORE ACCESSORIES: WET 

DESCRIPTION: ACCESSORIES 

A range of quality accessories made 

from premium grade tool steels for 

maximum strength and durability. 

Made in the U.K. 

DESCRIPTION - WET ACCESSORIES REFERENCE WET 

½” BSP (M) - 1¼” UNC (M) ADAPTOR AD1 £26.00 

½” BSP (F) - 1¼” UNC (F) ADAPTOR AD2 £26.00 

½” BSP (M) - ½” BSP (M) ADAPTOR AD3 £26.00 

300MM - 1¼” UNC (F) - 1¼” UNC (M) EXTENSION EXT1 £52.00 

300MM - ½” BSP (F) - ½” BSP (M) EXTENSION EXT2 £52.00 

HILTI DD100/120/130 - ½ BSP (F) & 1¼” UNC (M) DD130 £70.00 

HILTI DD200 - ½ BSP (F) & 1¼” UNC (M) DD200 £165.00 

BRAND 

ORDER LINE: 01909 552470 

APPLICATIONS: 

Wet core drill adaptors that allow the 

use of core drills on a variety of different 

machine types and allow you to extend 

the reach of the core drills. 

APPLICATIONS: 

Adaptors that allow the use of core 

drills on a variety of different machine 

types and allow you to extend the 

reach of the core drills. 

AD1 AD2 AD3 

EXT1 EXT2 

DD130 DD200

DIAMOND GRINDERS 

DOUBLE ROW CUP GRINDERS 

TURBO CUP GRINDERS 

FLOOR GRINDING PLATES

DIAMOND GRINDERS 

30 

BRAND 

CUP GRINDER: DPCG 


DRY/WET: BOTH 

SEGMENT TYPE: DOUBLE ROW 

SEGMENTED 



CUP GRINDER: DCG 


DRY/WET: BOTH 

SEGMENT TYPE: DOUBLE ROW 

SEGMENTED 



CUP GRINDER: DPTCG 


DRY/WET: BOTH 

SEGMENT TYPE: TURBO 

SEGMENTED 



FLOOR GRINDER: FGP10/16/20 


DRY/WET: BOTH 




ORDER LINE: 01909 552470 

DESCRIPTION: 

CONCRETE & STONE 

A Pro-Line double row cup grinder. 

APPLICATIONS: 

Long life and good stock removal 

in concrete and medium hard stone. 

DESCRIPTION: 


A Standard-Line double row cup grinder. 

APPLICATIONS: 

Good life and stock removal in concrete 

and medium hard stone. 

DESCRIPTION: 


A Pro-Line turbo style cup grinder. 

APPLICATIONS: 

High stock removal and good life in 

concrete and medium hard stones. 

DESCRIPTION: 

CONCRETE FLOORS 

A selection of 10, 16 and 20 segmented 

floor grinding plates for use on PRM type 

floor grinding machines, with multi holes 

in plate for most machine types. 

APPLICATIONS: 

Concrete. 

DIMENSIONS FGP10/16/20 DPTCG DPCG DCG 

(4”) 100 x 15/22.2 £85.00 £85.00 £80.00 

(4½”) 115 x 15/22.2 £104.00 £104.00 

(5”) 125 x 22.2 £119.00 £119.00 £95.00 

(6”) 150 x 22.2 £150.00 £150.00 

(7”) 180 x 22.2 £186.00 £186.00 £125.00 

(10”) 250 - 10 Segments £285.00 

(10”) 250 - 16 Segments £320.00 

(10”) 250 - 20 Segments £345.00

CONCAVE DIAMOND BLADES 

CURVED CUTTING OF TILES & STONE

CONCAVE 


32 

BRAND 

DIMENSIONS DU-CURVEX 

(4½”) 115 x 2.2 x 22.2 £38.00 

(5”) 125 x 2.2 x 22.2 £40.00 

(9”) 230 x 2.2 x 22.2 £90.00 

CONCAVE DIAMOND BLADE: DU-CURVEX 


DRY/WET: BOTH 


TURBO RIM 



ORDER LINE: 01909 552470 

DESCRIPTION: 

HARD CONCRETE, TILE & STONE 

Blade is directly sintered with a high 

performance bond system and available in 

3 diameters (115, 125 & 230mm) 

APPLICATIONS: 

All types of concrete, tile and hard stones. 

For cutting curves. The smaller the diameter 

of blade selected, the smaller the radius of 

curve possible.

CARBIDE RIPPA BLADES 

WOOD, TREE ROOTS, RUBBER, PLASTICS & MORE

CARBIDE RIPPA BLADES 

34 

BRAND 

DIMENSIONS DU-RB 

(5”) 125 x 22.2 £100.00 

(9”) 230 x 22.2 £180.00 

(12”) 300 x 20.0 £240.00 

(14”) 350 x 20.0 £285.00 

(14”) 350 x 25.4 £285.00 

CARBIDE RIPPA BLADE: DU-RB 


DRY/WET: BOTH 

SEGMENT TYPE: CARBIDE 

CLUSTERS 


CORE PROTECTION: SILENCED 

THESE ARE THE ORIGINAL RIPPA BLADES - NOT TO BE CONFUSED WITH INFERIOR COPIES 

ORDER LINE: 01909 552470 

DESCRIPTION: 

MULTI-USE 

A unique welded tip carbide saw blade 

for use on petrol driven saws and angle 

grinders with a reduced noise and 

vibration centre. Blade is bi-directional. 

APPLICATIONS: 

Tree roots, wood boards and planks, 

fence panels, thin sheet metal, nails, screws, 

flashing, decking, groundwork, rubber, 

plastic, abrasive blocks, flat roofs and tar. 

Anything a diamond blade can’t cut! 

SAFETY STANDARDS: 

DURO ULTRA RIPPA blades have been tested in-house and approved for sale in the U.K by B.S.I and in line with the 

GPSD (General Product Safety Directive). 

They are manufactured to the same stringent standards as all our diamond tools - in line with EN13236 but cannot be 

marked as such as they are not classified as a super-abrasive (diamond tool). 

A copy of our internal documentation is available upon request.

SABRE SAW BLADE 

MULTI PURPOSE SAW BLADE FOR ANGLE GRINDERS

SABRE SAW BLADES 

36 

BRAND 

SABRE SAW BLADE: DPWB 

TOOL: ANGLE GRINDERS 

CUTTING TEETH: 4 OFF-SET 

CUTTING TEETH TYPE: PRECISION 

GROUND 

DRY/WET: DRY CUTTING 

RESHARPEN: YES 

DIMENSIONS DPWB 

(4½”) 115 x 22.2 £18.50 

(5”) 125 x 22.2 £19.50 

(9”) 230 x 22.2 £36.00 

ORDER LINE: 01909 552470 

DESCRIPTION: 

A unique, precision profiled saw blade 

designed exclusively for use on angle 

grinders. Extremely fast and free cutting, 

the SABRE Saw blade enables smooth, 

clean cuts with its unique off set precision 

tooth formation. It has excellent tool life. 

APPLICATIONS: MULTI-USE 

Wood boards and planks, fence panels, 

decking, plastics, tubing, corrugated plastic 

roofing, plaster board, mdf, plywood, 

fibreglass, polyethelene, pvc 

and much more...

CIRCULAR SAW BLADES 

WOODWORKING 

NON FERROUS METAL & OTHER MATERIALS


CARBIDE TIPPED FOR WOOD 

38 

DESCRIPTION: 

WOODWORKING 

BORE: REAMED FOR PRECISE FIT 

A range of tungsten carbide tipped circular 

saw blades designed for a professional 

finish. Body hardened and tempered to 

CARBIDE TIPS: TC3 CARBIDE 

retain trueness. High grade alloy steel is 

precision ground to maintain flatness. 

BRAZING: SILVER FOR SECURE 

BOND OF TIP APPLICATIONS: 

CIRCULAR SAW: WOODWORKING 

Soft wood, hard wood, plasterboard, stone 

fibre board and particle board and much 

CONFIGURE: ALTERNATE TOP BEVEL more. 

Do not use on metal. 

STEEL PLATE: HIGH GRADE ALLOY 

Each saw blade comes with free bushes. 

DIMENSIONS TEETH QTY BODY / TIP PART NO. FREE BUSHES LIST PRICE 

130 x 20.00 20 1.4mm / 2.2mm 130x20-DCS-W20 12.75-16 £12.25 

140 x 20.00 24 1.4mm / 2.2mm 140x20-DCS-W24 12.75-16 £13.00 

175 x 20.00 40 1.4mm / 2.2mm 175x20-DCS-W40 12.75-16 £19.50 

180 x 30.00 24 1.4mm / 2.2mm 180x30-DCS-W24 16-20-25 £16.00 

180 x 30.00 40 1.4mm / 2.2mm 180x30-DCS-W40 16-20-25 £20.50 

184 x 16.00 20 1.6mm / 2.6mm 184x16-DCS-W20 n/a £21.00 

190 x 20.00 24 1.6mm / 2.6mm 190x20-DCS-W24 12.75-16 £20.00 

190 x 20.00 40 1.6mm / 2.6mm 190x20-DCS-W40 12.75-16 £22.25 

190 x 30.00 24 1.6mm / 2.6mm 190x30-DCS-W24 16-20-25 £20.00 

190 x 30.00 40 1.6mm / 2.6mm 190x30-DCS-W40 16-20-25 £22.25 

200 x 30.00 24 1.6mm / 2.6mm 200x30-DCS-W24 16-20-25 £20.25 

200 x 30.00 40 1.6mm / 2.6mm 200x30-DCS-W40 16-20-25 £24.50 

210 x 30.00 24 1.6mm / 2.6mm 210x30-DCS-W24 16-20-25 £23.75 

210 x 30.00 40 1.6mm / 2.6mm 210x30-DCS-W40 16-20-25 £26.75 

216 x 30.00 24 1.6mm / 2.6mm 216x30-DCS-W24 16-20-25 £24.50 

216 x 30.00 40 1.6mm / 2.6mm 216x30-DCS-W40 16-20-25 £27.75 

216 x 30.00 80 1.6mm / 2.6mm 216x30-DCS-W80 16-20-25 £34.50 

230 x 30.00 24 1.8mm / 2.6mm 230x30-DCS-W24 16-20-25 £27.25 

230 x 30.00 40 1.8mm / 2.6mm 230x30-DCS-W40 16-20-25 £29.00 

250 x 30.00 40 2.2mm / 3.2mm 250x30-DCS-W40 20-25 £29.25 

250 x 30.00 60 2.2mm / 3.2mm 250x30-DCS-W60 20-25 £33.50 

254 x 30.00 40 2.2mm / 3.2mm 254x30-DCS-W40 20-25 £31.00 

300 x 30.00 48 2mm / 3mm 300x30-DCS-W48 20-25 £53.50 

300 x 30.00 60 2mm / 3mm 300x30-DCS-W60 20-25 £55.00 

305 x 30.00 32 2mm / 3mm 305x30-DCS-W32 20-25 £52.50 

305 x 30.00 100 2mm / 3mm 305x30-DCS-W100 20-25 £69.50 

ORDER LINE: 01909 552470 

BRAND


CARBIDE TIPPED FOR WOOD WITH ANTI KICK BACK 

c 

b 

a 

CIRCULAR SAW: WOODWORKING 




BOND OF TIP 

ORDER LINE: 01909 552470 

39 

DESCRIPTION: 

WOODWORKING WITH ANTI KICK-BACK 






Anti kick-back configuration helps protect 

the user on hand held saws. 

CONFIGURE: ALTERNATE TOP BEVEL APPLICATIONS: 

Soft wood, hard wood,plasterboard, stone 

fibre board and particle board and much 

more. Do not use on metal. 



ANTI KICK-BACK TECHNOLOGY 

Anti kick-back technology stops the 

blade from being grabbed by the 

workpiece - causing the workpiece 

to be thrown back toward the user. 

Especially dangerous on hand held 

machinery where the user is more 

open to kick-back debris. 

Highlighted here as (a), (b) & (c) 


150 x 20.00 24 1.4mm / 2.2mm 150x20-DCS-W24-A 12.75-16 £15.00 

150 x 20.00 40 1.4mm / 2.2mm 150x20-DCS-W40-A 12.75-16 £17.50 

160 x 20.00 24 1.4mm / 2.2mm 160x20-DCS-W24-A 12.75-16 £15.90 

160 x 20.00 40 1.4mm / 2.2mm 160x20-DCS-W40-A 12.75-16 £18.25 

165 x 20.00 24 1.4mm / 2.2mm 165x20-DCS-W24-A 12.75-16 £16.25 

165 x 20.00 40 1.4mm / 2.2mm 165x20-DCS-W40-A 12.75-16 £17.50 

184 x 30.00 24 1.4mm / 2.2mm 184x30-DCS-W24-A 16-20-25 £16.00 

184 x 30.00 40 1.4mm / 2.2mm 184x30-DCS-W40-A 16-20-25 £16.50 

BRAND


CARBIDE TIPPED FOR ALUMINIUM, NON-FERROUS 

METALS, PLASTICS & OTHER MATERIALS 

40 

METAL CUTTING 

DESCRIPTION: 

MULTI-PURPOSE 









BOND OF TIP APPLICATIONS: 

CIRCULAR SAW: MULTI-PURPOSE 

Triple chip teeth for high end performance 

in plastics & alloys. 

CONFIGURE: TRIPLE GROUND CHIP 




184 x 30.00 48 1.8mm / 2.6mm 184x30-DCS-M48 16-20-25 £28.50 

210 x 30.00 60 1.6mm / 2.6mm 210x30-DCS-M60 16-20-25 £37.00 

215 x 30.00 60 1.6mm / 2.6mm 215x30-DCS-M60 16-20-25 £38.50 

250 x 30.00 60 2.0mm / 2.8mm 250x30-DCS-M60 16-20-25 £44.00 

250 x 30.00 80 2.0mm / 2.8mm 250x30-DCS-M80 16-20-25 £48.00 

250 x 30.00 100 2.0mm / 2.8mm 250x30-DCS-M100 16-20-25 £53.50 

300 x 30.00 72 2.2mm / 3.0mm 300x30-DCS-M72 16-20-25 £68.50 

300 x 30.00 96 2.2mm / 3.0mm 300x30-DCS-M96 16-20-25 £74.50 

350 x 30.00 72 2.4mm / 3.2mm 350x30-DCS-M72 16-20-25 £99.50 

ORDER LINE: 01909 552470 

BRAND

DIAMOND TILE DRILLS 

VERY HARD TILES, GRANITE AND GLASS 

DIAMOND HOLE SAWS 

MULTI-PURPOSE

DIAMOND TILE DRILLS 

42 

DIAMOND TILE DRILL: DU-CTD 


DRY/WET: WET 

SEGMENT TYPE: WELDED 

TIP 


REVERSE SPIRAL FOR WATER RETENTION AND IN BUILT CORE EJECTON 

DIAMOND TILE DRILL KIT: CTD-KIT 

DESCRIPTION: 

INSTALLER KITS 

5 piece kit in a durable hard plastic 

case containing on each of 

5 popular plug sizes. 

Includes 5, 6, 7, 8 & 10.0mm 

TYPICAL APPLICATION SIZE / REF DU-CTD 

YELLOW PLUG 5MM £17.20 

RED PLUG 6MM £17.20 

RED PLUG MULTI PACK - (5 QTY) 6MM £82.00 

BROWN PLUG 7MM £17.20 

BROWN PLUG MULTI PACK - (5 QTY) 7MM £82.00 

FISCHER NYLON PLUG 8MM £17.20 

BLUE PLUG/BORE PIPE 10MM £19.00 

COACH SCREW 12MM £19.00 

15MM COPPER PIPE 16MM £22.50 




1½” WASTE PIPE 35MM £41.00 

PLUG SIZES KIT - 5, 6, 7, 8 & 10MM £95.00 

BRAND 

ORDER LINE: 01909 552470 

DESCRIPTION: 

PORCELAIN & CERAMIC 

A Top-Line range of welded tip diamond 

drills with a reverse spiral design to feed 

water to the cutting face, plus in-built core 

ejection system to prevent clogging. 

APPLICATIONS: 

Porcelain (grade 5), ceramic, quarry tiles, 

terracotta, glazed tiles, terrazzo, marble, 

agglomerates, cement and glass. 

DESCRIPTION: 

APPLICATION MULTI PACKS 

5 piece kit in a durable hard plastic 

case containing 5 pieces of the same 

size drill. 

Available in 6 & 7mm variations

DIAMOND HOLE SAWS 

MULTI PURPOSE 

BRAND 

DIMENSIONS DU-DHS 

19.0 x 40.0 £32.50 

22.0 x 40.0 £35.00 

29.0 x 40.0 £41.00 

35.0 x 40.0 £49.00 

38.0 x 40.0 £50.50 

44.0 x 40.0 £56.00 

57.0 x 40.0 £65.00 

64.0 x 40.0 £71.50 

82.0 x 40.0 £83.00 

85.0 x 40.0 £89.00 

87.0 x 40.0 £93.00 

105.0 x 40.0 £95.00 

114.0 x 40.0 £116.00 

DIAMOND HOLE SAW: DU-DHS 


DRY/WET: BOTH 

SEGMENT TYPE: N/A 



ORDER LINE: 01909 552470 

43 

DESCRIPTION: 

MULTI-PURPOSE 

A top line range of multi-purpose, welded 

tip diamond holesaws with slots in the core 

barrel to clear waste material. 

APPLICATIONS: 

WET - porcelain and quarry tiles, Class 5, 

granite, travertine, marble, reinforced glass 

and cement, stone - DRY - glass, polymers, 

fibreglass, decking, ply wood, mdf, 

plastics, laminates, perspex, brick, paving - 

LUBRICATED - cast iron, virton, aluminium

TILE DRILLS & HOLESAWS 

DIAMOND DRILLING ACCESSORIES 

44 

DIAMOND TILE DRILL WATER FEED & GUIDE: CTD-DG 

DESCRIPTION: 

WATER FEED 

Water is held in the plastic container 

and allowed to flow through to the 

drilling point in a steady amount. 

The unit is held firmly onto the tile 

surface by wetting the neoprane on 

the reverse of the unit. 

DIAMOND HOLE SAW: ADAPTORS 

DESCRIPTION: 

DRIVE ADAPTORS 

A top line range of adaptors for 

multi-purpose, welded tip diamond 

holesaws. 

DIAMOND HOLE SAW: ADAPTORS 

DESCRIPTION: 

ANGLE GRINDER DRIVE ADAPTOR 

An adaptor to enable the use of 

the multi-purpose holesaws on 

standard angle grinders. 

N.B 

35mm diameters and above only. 

DESCRIPTION REF 

WATER FEED AND DRILL GUIDE UNIT WDS2 £11.30 

SDS 9.5MM ADAPTOR £7.20 

SDS 13MM ADAPTOR £9.00 

HEX 9.5MM ADAPTOR £7.20 

HEX 13MM ADAPTOR £9.00 

ANGLE GRINDER ADAPTOR £45.00 

9.5mm adaptors for use on 19-29mm, 13mm adaptors for use on 35mm and above 

BRAND 

ORDER LINE: 01909 552470 

DESCRIPTION: 

DRILL GUIDE 

The v-shaped internal design of the drilling 

guide means that all DURO tile drill sizes 

can be accommodated in this single unit. 

The v-shaped guide holds the tile drill in 

position when drilling is commenced. 

DESCRIPTION: 

DRIVE ADAPTORS 

Allows holesaws to be driven by either 

SDS Plus or 3 jaw chuck rotary power tools. 

There are two sizes of adaptor to cover the 

full range of holesaws. 

DESCRIPTION: 

ANGLE GRINDER DRIVE ADAPTOR 

Allowing these multi-purpose holesaws to 

be used on any brand of angle grinder. 

N.B 

Not for use on 4” (100mm) angle grinders.

DIAMOND TILE BLADES 

SUPER THIN PORCELAIN TILE BLADES 

CERAMIC TILE BLADES

DIAMOND TILE BLADES 

46 

BRAND 

SUPER THIN PORCELAIN DIAMOND BLADE: DUT 


DRY/WET: BOTH UP TO 125MM 

WET ABOVE 125MM 


TURBO RIM 



CERAMIC DIAMOND BLADE: DPT 


DRY/WET: BOTH UP TO 180MM 

WET ABOVE 180MM 


RIM 



DIMENSIONS DUT DPT 

(4½”) 115 x 1.2 x 22.2 £39.00 

(4½”) 115 x 1.6 x 22.2 £20.00 

(5”) 125 x 1.2 x 22.2 £41.00 

(5”) 125 x 1.6 x 22.2 £23.00 

(6”) 150 x 1.4 x 25.4 £55.00 

(6”) 150 x 1.6 x 25.4 £31.00 

(7”) 180 x 1.6 x 25.4 £70.00 

(7”) 180 x 1.6 x 25.4 £41.00 

(8”) 200 x 1.6 x 25.4 £85.00 

(8”) 200 x 1.6 x 25.4 £51.00 

(9”) 230 x 1.8 x 25.4 £100.00 

(9”) 230 x 1.6 x 25.4 £58.00 

(10”) 250 x 1.8 x 25.4 £110.00 

(10”) 250 x 1.6 x 25.4 £68.00 

(12”) 300 x 2.0 x 25.4 £160.00 

(12”) 300 x 2.4 x 25.4 £140.00 

(14”) 350 x 2.2 x 25.4 £200.00 

(14”) 350 x 3.4 x 25.4 £178.00 

DESCRIPTION: 

PORCELAIN & CERAMIC 

Super thin at 1.2 mm thick (115 & 125mm), 

this blade has a continuous rim and turbo 

design to cut quickly and not chip the 

materials. 

APPLICATIONS: 

Porcelain, ceramic, natural stone and other 

very hard tiles. Can be used dry up to 

125mm but water is recommended above 

this dimension. 

DESCRIPTION: 

CERAMIC 

A range of continuous rim tile saw blades 

for angle grinders and fixed machines. 

APPLICATIONS: 

All types of ceramic and stone tiles. Can 

be used dry up to 180mm but water is 

recommended above this dimension.

HAMMER DRILLS 

SDS PLUS DRILL BITS 

SDS MAX DRILL BITS

HAMMER DRILLS 


48 

BRAND 

DRILL BIT: DP-SPLUS 

SHANK STYLE: SDS PLUS 

TIP TYPE: SINTERED CARBIDE 

BONDING METHOD: HIGH 

MELTING POINT 

FLUTE SHAPE: FAST, DEEP SPIRAL 

SINGLE TIP / CROSS HEAD: SINGLE 

DIMENSIONS DP-SPLUS 

4.0 x 110 £2.84 






8.0 x110 £1.52 

10.0 x 110 £1.66 

4.0 x 160 £3.33 

5.0 x 160 £1.52 

5.5 x 160 £1.59 

6.0 x 160 £1.59 

6.5 x 160 £1.66 

7.0 x 160 £1.73 

8.0 x 160 £1.73 

9.0 x 160 £3.71 

10.0 x 160 £1.80 

11.0 x 160 £5.42 

12.0 x 160 £2.08 














5.5 x 260 £2.89 

6.0 x 260 £2.89 

6.5 x 260 £3.04 

8.0 x 260 £3.12 


11.0 x 260 £6.96 

12.0 x 260 £3.90 

14.0 x 260 £4.76 

16.0 x 260 £5.31 

18.0 x 260 £7.49 

20.0 x 260 £9.45 








8.0 x 450 £6.01 


12.0 x 450 £6.48 

14.0 x 450 £7.73 

16.0 x 450 £8.82 

18.0 x 450 £10.46 

20.0 x 450 £13.04 

25.0 x 450 £19.21 

ORDER LINE: 01909 552470 

DESCRIPTION: 


Premium quality with high quality jointing 

methods between tip and body. Precision 

machined SDS+ shank to limit power tool wear 

with special flute design for speed & strength. 

APPLICATIONS: 

All masonry and concrete types. Truer, 

rounder holes for all fixings applications and 

through holes.

HAMMER DRILLS 

SDS PLUS DRILL BITS - EXTRA LONG 

BRAND 

DRILL BIT: DP-SPLUS 



BONDING METHOD: HIGH 

MELTING POINT 


SINGLE TIP / CROSS HEAD: CROSS HEAD 

DIMENSIONS DP-SPLUS 

8.0 x 600 £14.56 


12.0 x 600 £16.10 

14.0 x 600 £19.17 

16.0 x 600 £24.20 

18.0 x 600 £30.18 

20.0 x 600 £34.41 

22.0 x 600 £36.25 

25.0 x 600 £45.00 

10.0 x 1000 £33.94 

12.0 x 1000 £34.62 







ORDER LINE: 01909 552470 

49 

DESCRIPTION: 

SDS PLUS DRILL BITS - EXTRA LONG 



machined SDS+ shank to limit power tool wear 

with special flute design for speed & strength. 

APPLICATIONS: 



through holes.

HAMMER DRILLS 

SDS MAX DRILL BITS 

50 

BRAND 

DRILL BIT: DP-SMAX 

SHANK STYLE: SDS MAX 


BONDING METHOD: COPPER 

BRAZED 


SINGLE TIP / CROSS HEAD: SINGLE 

DRILL BIT: DP-SMAX-CROSS 



BONDING METHOD: COPPER 

BRAZED 


SINGLE TIP / CROSS HEAD: CROSS 

DIMENSIONS DP-SMAX 

12.0 x 390 £28.22 

12.0 x 540 £38.03 

13.0 x 390 £30.29 

13.0 x 540 £38.43 

14.0 x 390 £31.16 

14.0 x 540 £38.91 

15.0 x 390 £31.71 

15.0 x 540 £40.56 

16.0 x 305 £26.86 

16.0 x 450 £30.45 

18.0 x 305 £27.75 

18.0 x 450 £31.75 

20.0 x 285 £28.70 

20.0 x 430 £35.05 

22.0 x 285 £30.29 

22.0 x 430 £36.73 

25.0 x 285 £34.66 

25.0 x 430 £41.03 

DIMENSIONS DP-SMAX-CROSS 

16.0 x 390 £42.74 

16.0 x 540 £47.60 

16.0 x 920 £97.11 

18.0 x 390 £43.11 

18.0 x 540 £47.60 

19.0 x 390 £43.84 

19.0 x 540 £47.60 

20.0 x 370 £50.40 

20.0 x 520 £52.24 

20.0 x 920 £99.69 

22.0 x 370 £50.40 

22.0 x 520 £52.24 

22.0 x 920 £101.46 

24.0 x 370 £56.43 

24.0 x 520 £57.76 

25.0 x 370 £56.43 

25.0 x 520 £56.43 

25.0 x 920 £149.94 

26.0 x 370 £63.27 

26.0 x 520 £68.06 

28.0 x 370 £60.40 

28.0 x 570 £68.06 

30.0 x 370 £63.86 

30.0 x 570 £70.56 

32.0 x 370 £66.80 

32.0 x 570 £73.50 

32.0 x 590 £154.43 

35.0 x 570 £82.77 

38.0 x 570 £110.73 

40.0 x 570 £127.94 

ORDER LINE: 01909 552470 

DESCRIPTION: 

SDS MAX SINGLE TIP DRILL BITS 



machined shank to limit power tool wear with 

high concentricity between tip / body / shank 

APPLICATIONS: 



through holes. 

DESCRIPTION: 

SDS MAX CROSS HEAD DRILL BITS 



machined SDS Max shank to limit power tool 

wear - extra tips limit vibration. 

APPLICATIONS: 



through holes.

SDS PLUS CHISELS 

INNOVATIVE APPLICATION SPECIFIC CHISELS 

STANDARD POINTS & CHISELS



52 

DIMENSIONS 


ACTION: HAMMER ONLY 

HEAD TYPE: FORGED STEEL 

WITH CARBIDE TIPS 

BRAZE: COPPER 

DP-SDS-MRC (Mortar Raker) £29.61 

DP-SDS-BRC (Brick Remover) £48.64 

DP-SDS-TRC (Tile Remover) £25.00 

DP-SDS-SC-HOLDER £44.74 

(Scutch Comb Holder) 

BRAND 

CHISEL: DP-SDS-MRC 

BODY STYLE: CRANKED BODY 

CHISEL: DP-SDS-BRC 





BRAZE: COPPER 

BODY STYLE: FLAT - NARROWED END 

CHISEL: DP-SDS-TRC 




BRAZE: N/A 

BODY STYLE: CRANKED - WIDE HEAD 

CHISEL: DP-SDS-SC 




WITH SCUTCH INSERTS 

BRAZE: N/A 

BODY STYLE: FLAT - SCUTCH HEAD 

DP-SDS-SC (Scutch Combs) £1.60 

ORDER LINE: 01909 552470 

DESCRIPTION: 

MORTAR RAKING CHISEL 

Allows mortar removal w/out damaging brick 

and up to window & door frames & behind 

pipework. Debris in chunks as opposed to 

dust. Carbide tipped for long life. 

APPLICATIONS: 


Use in conjunction with an SDS plus 

machine with roto-stop. 

DESCRIPTION: 

BRICK REMOVING CHISEL 

Allows removal of whole bricks w/out 

damaging them and the bricks around them. 

Long blade allows penetration to full brick 

depth with carbide tips for long life. 

APPLICATIONS: 


Use in conjunction with an SDS plus 


DESCRIPTION: 

TILE REMOVING CHISEL 

Angled blade ensures impact energy is 

exerted underneath the tile and not into the 

floor / wall. Can be used to remove adhesive 

and plaster. 

APPLICATIONS: 

All types tile, plaster and adhesives. 

DESCRIPTION: 

SCUTCH COMB CHISEL 

Allows scutching operations using 

SDS plus machines instead of hand held. 

Interchangeable ends mean no sharpening is 

necessary. Can also be used with ‘droves’. 

APPLICATIONS: 

All types of masonry - dressing, chasing 

etc. Multi purpose tool, extremely versatile.



DIMENSIONS 

BRAND 

CHISEL: DP-SDS-CC 




WITH MACHINED HEAD 

BRAZE: N/A 

BODY STYLE: CRANKED 

CHISEL: DP-SDS-RC 




WITH CARBIDE INSERT 

BRAZE: COPPER 


CHISEL: DP-SDS-EWC 




BRAZE: N/A 

BODY STYLE: FLAT - WIDE HEAD 

DP-SDS-CC30 (Std Conduit) £56.13 

DP-SDS-CC55 (Capping Runs) £62.04 

DP-SDS-CC20 (Extended Reach) £58.07 

DP-SDS-RC30 (Raking Chisel) £60.37 

DP-SDS-RC55 (Raking Chisel) £65.70 

DP-SDS-EWC80 (Wide Chisel) £14.58 

ORDER LINE: 01909 552470 

53 

DESCRIPTION: 

CHANNELLING CHISELS 

Quickly produce channels for cable runs etc. 

Dust doesn’t become airborne as tends to 

be in chunks. Can be used in conjunction 

with a wall chasing machine. 

APPLICATIONS: 

Medium density block and soft brick. 

Standard conduit (30mm) / capping runs 

(55mm) and channelling behind skirting with 

long neck version (20mm) 

DESCRIPTION: 

CARBIDE TIPPED RAKING CHISELS 

For general masonry work in hard materials. 

e.g channel chasing in engineering bricks. 

Carbide tipped for long life. 30mm and 

55mm versions. 

APPLICATIONS: 

All types of brick and masonry including 

engineering brick. Also concrete. 

DESCRIPTION: 

EXTRA WIDE CHISEL 

Extra wide 80mm blade for general purpose 

masonry work including chopping out 

electrical back boxes to size. 150mm overall 

length. 

APPLICATIONS: 

Medium density block, soft brick through to 

engineering brick.

SDS PLUS & CHISELS 

SDS CHISELS 

54 

DIMENSIONS 

BRAND 

CHISEL: DP-SDS-POINT 




BRAZE: N/A 

BODY STYLE: STRAIGHT - CHISEL POINT 

CHISEL: DP-SDS-CHISEL 




BRAZE: N/A 

BODY STYLE: STRAIGHT - FLAT CHISEL 

CHISEL: DP-SDS-SCHISEL 




BRAZE: N/A 


CHISEL: DP-SMAX-SDS-AD 


ACTION: HAMMER & ROTARY 

HEAD TYPE: N/A 

BRAZE: N/A 

BODY STYLE: ADAPTOR 

DP-SDS-POINT £6.71 

DP-SDS-CHISEL £6.29 

DP-SDS-SCHISEL (SCALING) £8.71 

DP-SMAX-SDS-AD £57.00 

ORDER LINE: 01909 552470 

DESCRIPTION: 

SDS PLUS POINTS 

General purpose masonry work, especially 

useful for chopping out drilled core holes. 

250mm overall length. 

APPLICATIONS: 


engineering brick and concrete. 

DESCRIPTION: 

SDS PLUS CHISEL 

General purpose masonry work. 

20mm wide chisel end. 

250mm overall length 

APPLICATIONS: 


engineering brick and concrete. ) 

DESCRIPTION: 

SDS PLUS SCALING CHISEL 



250mm overall length. 

APPLICATIONS: 



DESCRIPTION: 

SDS PLUS TO SDS MAX ADAPTOR 

Allows SDS Plus drill bits and accessories 

to be used in SDS Max machines giving 

flexibility of user options. 

APPLICATIONS: 

Dependent on drill or accessory 

to be inserted.

SDS MAX POINTS & CHISELS 

& BREAKER STEELS 

STANDARD POINTS, CHISELS & BREAKER STEELS 

INNOVATIVE APPLICATION SPECIFIC CHISELS

SDS MAX CHISELS 


56 

DIMENSIONS 

BRAND 

CHISEL: DP-SMAX-POINT 




BRAZE: N/A 

BODY STYLE: STRAIGHT - CHISEL POINT 

CHISEL: DP-SMAX-BRC 





BRAZE: COPPER 


CHISEL: DP-SMAX-CHISEL 




BRAZE: N/A 


CHISEL: DP-SMAX-EWC 




BRAZE: N/A 


DP-SMAX-POINT360 (360mm) £12.55 

DP-SMAX-POINT500 (500mm) £17.75 

DP-SMAX-BRC (Brick Remover) £48.64 

DP-SMAX-CHISEL360 (360mm) £12.55 

DP-SMAX-CHISEL500 (500mm) £17.75 

DP-SMAX-EWC50 (Wide Chisel) £22.16 

DP-SMAX-EWC80 (Wide Chisel) £24.25 

ORDER LINE: 01909 552470 

DESCRIPTION: 

SDS MAX POINTS 

General purpose masonry work, especially 

useful for chopping out drilled core holes. 

Option 1 - 360mm overall length 


APPLICATIONS: 



DESCRIPTION: 

BRICK REMOVING CHISEL 

Allows removal of whole bricks w/out 

damaging them and the bricks around them. 

Long blade allows penetration to full brick 

depth with carbide tips for long life. 

APPLICATIONS: 


Use in conjunction with an SDS max 


DESCRIPTION: 






APPLICATIONS: 



DESCRIPTION: 

EXTRA WIDE CHISEL - SDS MAX 

Extra wide 50mm & 80mm blade for general 

purpose masonry work including chopping 

out electrical back boxes to size (80mm only). 

APPLICATIONS: 

Medium density block, soft brick through to 

engineering brick. 

50mm option- 300mm overall length 

80mm option - 500mm overall length


SDS MAX BREAKER STEELS 

DIMENSIONS 

BRAND 

CHISEL: DP-SMAX-MP400 / NC400 




BRAZE: N/A 

BODY STYLE: STRAIGHT POINT / CHISEL 

CHISEL: DP-SMAX-CSPADE 




BRAZE: N/A 


CHISEL: DP-SMAX-STEM 




BRAZE: N/A 

BODY STYLE: STRAIGHT WITH STEM END 

CHISEL: DP-SMAX-SCHOLDER 




WITH SCUTCH INSERTS 

BRAZE: N/A 

BODY STYLE: FLAT - SCUTCH HEAD 

DP-SMAX-MP400 £30.00 

DP-SMAX-NC400 £30.00 

DP-SMAX-CSPADE £85.00 

DP-SMAX-STEM £32.00 

DP-SMAX-SCHOLDER £54.00 

ORDER LINE: 01909 552470 

57 

DESCRIPTION: 

MOIL POINT / NARROW CHISEL 

Drop Forged of high grade steel, with heat 

treated work areas. 

APPLICATIONS: 

Point used for demolition work and starting 

holes in the centre of a concrete slab. 

For general breaking where there is not a 

requirement to control the line of fracture. 

Chisel used where it is important to have 

a clean edge retained. 

DESCRIPTION: 

CLAY SPADE 

Clayspade is a purpose designed blade 

for cutting / digging of bolder clay. 

APPLICATIONS: 

Favoured by tunnelling contractors and 

companies specialising in under pinning 

in clay conditions. Also excellent for 

general garden and landscaping 

DESCRIPTION: 

FLOOR CLEANING PAD - STEM 

To be used in conjunction with the tamping 

pads. 

APPLICATIONS: 

The type of pad is selected to suit the 

type of compaction operation required 

whether this be for back filling following 

emergency repairs to services or 

compaction of mould in industrial 

applications. 

DESCRIPTION: 

SCUTCH COMB HOLDER 

Allows scutching operations using 

SDS Max machines instead of hand held. 

Interchangeable ends mean no sharpening 

is necessary. Can also be used with ‘droves’. 

APPLICATIONS: 

All types of masonry - dressing, chasing 

etc. Multi purpose tool, extremely versatile.

BREAKER STEELS 

KEY 

58 

CODE DESCRIPTION DIAGRAM 

1 

2 

3 

4 

5 

6 

7 

8 

9 


11 

12 

MOIL POINT - 380/450mm under collar 

Drop Forged of high grade steel, this Hammer Iron with heat treated work 

areas is used for demolition work and starting holes in the centre of a 

concrete slab. The most common of the demolition steels used for general 

breaking where there is not a requirement to control the line of fracture 

NARROW CHISEL - 380/450mm under collar 

Narrow Chisel used in a similar way to the moil point but the line of fracture 

is controlled along the line of the chisel end. Used on applications where it is 

important to have a clean edge retained on the workpiece to be broken 

75mm WIDE CHISEL - 380mm under collar 

Wide Chisel used generally where softer material is to be cut or broken again 

used on applications where the line of fracture needs to be controlled 

115mm WIDE TARMAC CUTTER 

Tarmac Cutter used for cutting of Coated stone the wedge shape of the side 

profile is preferred by many operators as it facilitates easy removal of the 

blade after each cut 

CLAYSPADE 

Clayspade is a purpose designed blade for cutting / digging of bolder clay. 

The clay spade geometry facilitates the cutting action to return to an open 

face. If the cutting edge is damaged by stone contamination in the burden 

to be cut it will damage the cutting edge and destroy the natural scooping 

action. This tool is favoured by tunnelling contractors and companies 

specialising in under pinning in clay conditions. Also excellent for general 

garden and landscaping 

STEM - use with 180mm Dia Tamping Pad 

These tools need to be used together the stem can have a number of shank 

configurations to suit both Pneumatic and Electric powered breakers. 

The pad is selected to suit the type of compaction operation required whether 

this be for back filling following emergency repairs to services or compaction 

of mould in industrial applications 

DIA TAMPING PAD - 180mm 

Floor cleaning tool 

WIDE ASPHALT CUTTER 

Asphalt Cutter similar in application to the Tarmac Cutter but has the benefit 

of a thinner parallel side profile and radius on the blade allowing faster 

penetration in the cutting action. Suitable for lighter weight and less 

powerful breakers 

MOIL POINT 330mm under collar 

The most common of the demolition steels used for general breaking where 

there is not a requirement to control the line of fracture 

NARROW CHISEL 330mm under collar 

Narrow Chisel used in a similar way to the moil point but the line of fracture 

is controlled along the line of the chisel end. Used on applications where it is 

important to have a clean edge retained on the burden to be broken 

STEM - FLOOR CLEANING TOOLS AND PADS 

Stem for floor cleaning tool is available with different shank types and 

facilitates the use of the smaller electric tamping pads and especially 

the floor cleaning tool 

FLOOR CLEANING TOOL 

Floor Cleaning Tool used in conjunction with a shank to suite the type of 

breaker to be used. The floor cleaning tool has a flexible replacement blade 

held in place by retaining bolts and can be used for the removal of lino tiles 

or debris spilt on to concrete floors prior to finishing 

ORDER LINE: 01909 552470


PNEUMATIC BREAKER STEELS 

STEEL: 32x160mm (1-1/4” x 6-1/4”) - Hex Shank 

DESCRIPTION PART NO. LIST 

Moil Point - 380mm under collar 32.0x160HX-MP380 £25.70 


Narrow chisel - 380mm under collar 32.0x160HX-NC380 £25.70 


75mm Wide chisel 32.0x160HX-75WC380 £45.70 

Tarmac Cutter - 115mm wide 32.0x160HX-115WTC300 £52.30 

Clayspade - 133x302 Blade 32.0x160HX-135x20CSPADE £88.60 

Stem for use with 180mm Pad 32.0x160HX-STEM £52.95 

Tamping Pad - 180mm 180MM DIAMETER PAD £114.30 

STEEL: 28x160mm (1-1/8” x 6-1/4”) - Hex Shank 






75mm Wide chisel 28.0x160HX-75WC380 £45.70 

Tarmac Cutter - 115mm wide 28.0x160HX-115WTC300 £52.30 

Stem for use with - 180mm Pad 28.0x160HX-STEM £52.95 

Tamping Pad - 180mm 180MM DIAMETER PAD £114.30 

STEEL: 25x108mm (1” x 4-1/4”) - Hex Shank 


Moil Point - 380mm under collar 25.0x108HX-MP380 £25.70 

Moil Point - 450mm under collar 25.0x108HX-MP450 £27.50 

Narrow chisel - 380mm under collar 25.0x108HX-NC380 £25.70 

Narrow chisel - 450mm under collar 25.0x108HX-NC450 £27.50 

Tarmac Cutter - 115mm wide 25.0x108HX-115WTC300 £22.10 

STEEL: 22x82mm (7/8” x 3-1/4”) - Hex Shank 





Narrow chisel - 450mm under collar 

125mm Wide Asphalt Cutter - 

22.0x82HX-NC450 £27.50 

300mm under collar 22.0x82HX-125WTC300 £52.30 

ORDER LINE: 01909 552470 

59


PNEUMATIC BREAKER STEELS 

60 

STEEL: 19x50mm (3/4” x 2”) - Hex Shank 




Clayspade - 100x165mm 19.0x50HX-100X165CS £102.30 

STEEL: 25x75mm Round Shank 


Moil Point - 330mm under collar 25.0X75RS-MP330 £25.70 

Narrow chisel - 330mm under collar 25.0X75RS-NC330 £25.70 

STEEL: C P 9 S Shank (for ball retainer chuck) 


Point - 250mm o/a length CP9S-P250 £12.85 

Narrow chisel - 250mm o/a length CP9S-NC250 £12.85 

75mm Wide chisel - 250mm o/a length CP9S-WC250 £30.00 

ORDER LINE: 01909 552470


ELECTRIC BREAKER STEELS 

STEEL: Kango 900/950 Shank Breaker Steels 


Moil Point - 380mm o/a length K900/950-MP380 £11.00 

Moil Point - 450mm o/a length K900/950-MP450 £12.50 

Narrow chisel - 380mm o/a length K900/950-NC380 £11.00 

Narrow chisel - 450mm o/a length K900/950-NC450 £12.50 

50mm Wide chisel - 300mm o/a length K900/950-50WC300 £19.00 

75mm Wide chisel - 300mm OAL K900/950-75WC300 £20.00 

Stem - floor cleaning tool & pad 275mm o/a K900/950-STEM £23.00 

Clayspade - 100x165 Blade K900/950-CSPADE £65.00 

Comb Holder K900/950-SCHOLDER £45.00 

STEEL: HILTI 905 & 1000 


Moil Point - 500mm o/a length H905/1000-MP500 £27.50 

Narrow chisel - 500mm o/a length H905/1000-NC500 £27.50 

75mm Wide chisel - 500mm o/a length H905/1000-75WC500 £48.50 

Clayspade - 100x165 Blade H905/1000-CSPADE £74.30 

Stem for Floor Cleaning Tool 

& Pads 275mm o/a H905/1000-STEM £37.50 

STEEL: BOSCH 11205 


Moil Point - 380mm o/a length B11205-MP380 £14.00 

Narrow chisel - 380mm o/a length B11205-NC380 £14.00 

STEEL: BOSCH 11304 USH 27 


Moil Point - 450mm overall length B11304-MP450 £23.70 

Narrow chisel - 450mm overall length B11304-NC450 £23.70 

Tarmac Cutter 115mm wide B11304-115WTC £72.00 

Clayspade - 100x165 Blade B11304-CSPADE £92.00 

(CLAYSPADE ONLY AVAILABLE WITH COLLAR) 

ORDER LINE: 01909 552470 

61


ELECTRIC BREAKER STEEL ACCESSORIES 

62 

STEEL: ACCESSORIES 


100mm dia Tamping Pads for 

electric hammer stems 100MM DIAMETER PAD £83.00 

125x150mm dia Tamping Pads for 

electric hammer stems 125-150MM DIAM PAD £150.00 

Floor Cleaning Tool for use with 

electric hammer stems FLOOR CLEANING TOOL £130.00 

Spare 2mm blade for floor cleaning tool CLEAN TOOL BLADE £28.50

ABRASIVE DISCS 

STEEL & INOX 

STEEL 

STONE


STEEL & INOX 

64 

ABRASIVE DISC: 41 FLAT CUTTING 

SHAPE: FLAT 

LAYERS OF REINFORCING: 2 

GRIT TYPE: COATED ALUM OXIDE 

- FREE OF FE, S & CL


STEEL / STEEL & INOX 

ABRASIVE DISC: 41H FLAT CUTTING 

SHAPE: FLAT 



MAX SPEED: 80m/s 

CUT OFF/GRIND: CUT OFF 

ABRASIVE DISC: 41 FLAT CUTTING 

SHAPE: FLAT 



- FREE OF FE, S & CL


STONE 

66 

ABRASIVE DISC: 41 & 41H FLAT CUTTING 

SHAPE: FLAT 


GRIT TYPE: SILICON CARBIDE 


CUT OFF/GRIND: CUT OFF 

ABRASIVE WHEEL: 27 D.C GRINDING 

SHAPE: DEPRESSED CENTRE 


GRIT TYPE: SILICON CARBIDE 


CUT OFF/GRIND: GRIND 

ORDER LINE: 01909 552470 

DESCRIPTION: 

STONE 

A range of high performance cutting discs 

for 12” petrol and electric cut-off machines. 

APPLICATIONS: 

All types of masonry and concrete. 

BOX QUANTITY = 25pcs (300mm = 10) 

DESCRIPTION: 

STONE 

A range of high performance grinding 

discs for angle grinders. 

APPLICATIONS: 

All types of masonry and concrete. 

BOX QUANTITY = 10pcs 

STONE 41 & 41H FLAT CUTTING SPECIFICATION PART NO. LIST PRICE 

41 Flat Cutting - (4”) 100 x 2.5 x 16.0 C30BF F100-16-ADS-2.5 £0.78 

41 Flat Cutting - (4½”) 115 x 2.5 x 22.2 C30BF F115-22.2-ADS-2.5 £0.84 

41 Flat Cutting - (5”) 125 x 2.5 x 22.2 C30BF F125-22.2-ADS-2.5 £0.92 



41H Flat Cutting - (12”) 300 x 3.5 x 20.0 C30BF F300-20.0-ADS-3.5 £2.80 

41H Flat Cutting - (12”) 300 x 3.5 x 22.2 C30BF F300-22.2-ADS-3.5 £2.80 

STONE 27 DEPRESSED CENTRE GRINDING SPECIFICATION PART NO. LIST PRICE 

27 Depressed Centre Grinding - (4”) 100 x 6.0 x 16.0 C30BF D100-16-ADS-6.0 £0.98 

27 Depressed Centre Grinding - (4½”) 115 x 6.0 x 22.2 C30BF D115-22.2-ADS-6.0 £1.08 

27 Depressed Centre Grinding - (5”) 125 x 6.0 x 22.2 C30BF D125-22.2-ADS-6.0 £1.20 

BRAND

MERCHANDISING 



PROMOTIONS 

TECHNICAL INFORMATION 

TERMS & CONDITIONS

MERCHANDISING 

FLOORSTANDING / COUNTER TOP / WALL MOUNTED 

68 

DURO can provide a complete merchandising or POS 

solution for every showroom environment, regardless 

of space availability or restriction. 

FULL SIZE TOOL BARS SINGLE BLADE DISPLAY 

SLAT WALL & PEG BOARD ELEMENTS COUNTER TOP DISPLAYS - METAL 

WIRE RACK DISPLAYS COUNTER TOP DISPLAYS - BOARD


RANGE & PRODUCT CARDS / LITERATURE / WEB 

DURO can supply individual product type cards, which further enhance the appearance 

of our merchandising units, and more importantly provide the customer with more detailed and 

informative product, application and performance recommendations. This way selling-up is more likely 

and add-on sales are created. 

In store product cards are also available for chisels and specialist cutters. They are used to promote the use 

of a product and raise awareness of how users can make their working day easier by utilising them. They 

enable stores to promote these specialist products rather than them being hidden behind trade counters. 

An extensive range of product and range literature is also available. 

Our website is constantly being updated with product information and video. 

www.duro-diamonds.com 

69


VALUE ADDED SERVICES 

70 

DURO SUPPORT is the brand new service 

from DURO. A range of value added services 

to help you grow your business. 

DURO SUPPORT DESCRIPTION: 

IMAGE DATABASE ACCESS 

DURO SUPPORT gives you 

access to a comprehensive 

library of 100’s of action, 

still and application imagery 

for DURO products. Use for 

printing, web enhancement or 

internal communication. All file 

variations are available to help 

you promote DURO products. 

DESCRIPTION: 

PRODUCT ACTION CLIPS 

DURO SUPPORT gives 

you access to an ever 

growing video database of 

DURO products in use. 

Whether required for instore 

promotion, demonstrations or 

training. 

New application clips can be 

taken when required. 


IN-HOUSE DESIGN 

DURO SUPPORT has an 

in-house design and marketing 

team, that works in tandem 

with the DURO sales team. 

The facilities of this 

department are available to 

DURO customers to help 

develop their own specific 

sales opportunities. 

*CONDITIONS APPLY 

DESCRIPTION: 

LITERATURE FORMATTING 


access to all DURO product 

and corporate literature. 

Available in a wide range 

of formats - use for e-mail, 

mailshots to your customers 

or websites downloads. Each 

file can be referenced to your 

company. Pdf/jpeg/mail ready. 

DESCRIPTION: 

TAILORED LITERATURE* 


the ability to tailor DURO 

literature to promote your own 

company. Inclusion of your 

company details -contact, 

logos and web can be added. 

Print ready or electronic files 

can be supplied very quickly 

and easily. 

*CONDITIONS APPLY


VALUE ADDED SERVICES 

DURO SUPPORT is aimed at increasing your 

sales and profits enabled by close working 

relationships with entire DURO team. 


WEBSITE SUPPORT 

DURO SUPPORT can 

support the building and 

successful operation of your 

own website. 

Web ready images and 

videos are available as well 

as full product specifications, 

descriptions and optimisation 

techniques for e-commerce 

sites. 

DESCRIPTION: 

TECHNICAL SUPPORT 

DURO SUPPORT is built from 

the knowledge gained by the 

DURO sales teams’ wealth 

of experience within the 

diamond and carbide drilling 

& cutting market. Technical 

specification of products, 

cross referencing of materials 

and user guidelines are all 

available as well as a support 

team to communicate with. 

DESCRIPTION: 

PRODUCT TRAINING 


access to our sales force and 

your local representatives. 

Full product training can be 

given on all DURO products 

and their abilities to enable 

you to best sell through the 

DURO range. Technical 

support documents are also 

freely available. 

DESCRIPTION: 

LOGISTICAL SUPPORT 

DURO SUPPORT is 

dedicated to fully supporting 

its customers with high 

levels of stocks and market 

leading deliveries. Investment 

throughout the DURO logistics 

departments ensure the 

highest levels of service to all 

DURO customers. 

Please speak to your DURO sales representative to 

discover how to get the most from your DURO range 

of services. 

71

PROMOTIONS 

72 

DURO believe that the key to success is to create products 

that are desired by the ultimate user customer. There are 

many ways to achieve this, through advertisements, press 

communications and electronic media, all of which we 

employ but, the best way to create that desire is to get 

users to try out our products in the first place. 

To achieve this, we organise and implement sell through promotional campaigns on behalf 

of our dealers each year. Each campaign runs for between two and three months. We strive to make 

the campaigns as easy for our dealers as is possible, that means we take care of everything from 

product to POS, all our dealers have to do is take part. The net results of these activities is increased 

sales, profits and new customers acquired for us and for our dealers. We hope you will be tempted 

to participate in our up-coming promotions in 2011! 

In addition to our sell-through campaigns, DURO also run several sell in campaigns each year. 

These campaigns typically offer our dealers the chance to purchase stock at preferential terms 

or perhaps receive additional stock incentives as part of an offer. These promotions are well 

recognised by our dealers and are a great way to increase profits throughout the year.


APPLICA- 

TION CHARTS 

73 

HDF Technology (High Density Forging) is a patented 

forged forged diamond segment segment manufacturing process, which offers 

significant increases increases in tool life and speed of cut due to it’s 

incredibly high segment segment matrix density. 

This also brings an improvement in laser welding strength 

that is is nothing short of astounding. 

In recent independent independent tests tests using X-ray imaging it has has been 

found to all but completely remove porosity from the welding zone, which is an age old industry 

issue. You can see these products marked throughout the catalogue and each blade has one 

segment with the DURO logo stamped into it. 

Shown here are actual x-rays taken of the new HDF welding zone and the welding zone from 

a competitor product. The HDF shows an incredible weld, with the competitor weld showing 

gaps and minimal bond. 

Near to zero porosity and 

a complete weld with 

astounding strength 

COMPETITOR 

WELDING 

High-porosity and 

gaps in the weld. 

DURO works hard to ensure the safety of its ultimate user 

customers, through close co-operation with its partner 

producers. As a result all DURO tools comply with 

the relevant European safety standards appropriate 

to the product. 

The EN mark on our products signifies that it has 

passed tough quality inspection and been tested rigorously 

prior to delivery. 

Additionally many DURO products are approved by oSa 

(Organisation for the Safety of Abrasives). Where a standard 

doesn’t exist for one of our innovative products, DURO self 

certify through the GPSD (General Product Safety Directive). 

DURO tools are produced using only the highest quality raw materials available. Debeers 

(Element Six) and GE synthetic diamond grits, high grade carbon steels, fine metal powders 

and top grade abrasive grains are all used to create the perfect tools. 

We mark and package our products in line with current legislation 

to provide the maximum amount of safety, application and 

user information possible. 

All DURO tools are 100% guaranteed against a genuine 

manufacturing defect. If you are unhappy with any DURO 

tools, please return the product to us stating the reason 

for the return and we will investigate fully and respond 

accordingly. 

You can download material and speed recommendation 

charts from our new website: 

www.duro-diamonds.com

DIAMOND BLADE 

APPLICATION CHART 

74 

IMPORTANT USAGE INFORMATION 

On these pages and the one following you will find product application guides, a convertor for cross 

referring blade speeds from m/s to rpm and vice versa, and a guide to recommended speed settings when 

using core drills. For further assistance on any technical aspect please contact your DURO representative. 

Hard 

& Dense 

Soft & 

Abrasive 

Material 

Specification 

of Blade 

Catalogue Page No. 

Glass / Reinforced Plastic 

Polyurethane 

Fibreglass 

Marble - Dry Cutting 

Steel Bars, Pipe & Sections 

SG & Grey Iron 

Porcelain & Hard Tiles 

Ceramic Tiles 

Indian Stone 

Granite 

Slate 

Class A Engineering Bricks 

Clay Paviors / Pipes / Tiles 

Flint Aggregate Product 

Class B Engineering Bricks 

Heavily Reinforced Concrete 

Medium Reinforced Concrete 

Lightly Reinforced Concrete 

Concrete 

Hard York Stone 

Quartzite 

London Brick 

Hard Concrete Products 

Kerbs / Lintels / Beams 

Cast Pipes 

Bricks / Concrete Flags 

Hand Made Bricks 

Facing Bricks 

Concrete Roof Tiles 

Soft Concrete Paviors 

Sand Based Paviors 

Green Concrete 

Cement Screed 

Lightweight Concrete Block 

Hot Rolled Asphalt 

Abrasive Sand / Gritstone 

Asphalt Over Concrete 

Asphalt 

Abrasive Mortar 

VACUUM BRAZED / 

TILE CUTTING / 

CURVEX 

DUT 

DPVB 

DPT 

DU-CURVEX 

HARD 

MATERIALS 

DUHB 

DUH 

Highly suited Suitable with reservations 

ORDER LINE: 01909 552470 


& BUILDING 

MATERIALS 

DPU/C 

DUU/C 

DPHB 

DPH 

DSBM 

DU/C 

20 46 46 32 9 22 9 22 10 10 10 10

CONSTRUCTION 

MATERIALS 

DPCM 

DUSCM 

ASPHALT & ABRASIVE 

MATERIALS 

MULTIPLE 

APPLICATIONS 

- CONSTRUCTION 

MULTIPLE 

APPLICATIONS 

- CIVIL ENG. 

DU-RING 

DSM 

DM 

DPM 

DA/C 

DPA/C 

DUA/C 

DCM-T 

DPCM-T 

DUM-S 

DA 

DPAB 

DPA 

DUA 

DCM 

11 11 11 12 12 12 12 13 13 13 14 14 14 18 18 18 22 22 


ORDER LINE: 01909 552470 

MORTAR 

RAKING 

SPECIAL 

APP’S 

75 

DUU/C LOOP


BLADE SPEEDS / CORE DRILL APPLICATIONS & SPEEDS 

76 

BLADE SPEED RECOMMENDATIONS 

ø 

Metres per second (m/s) 

mm 16 20 25 32 35 40 50 63 80 100 125 

100 

115 

125 

150 

175 

180 

200 

225 

230 

250 

300 

350 

400 

450 

500 

600 

3,050 

2,650 

2,440 

2,030 

1,740 

1,690 

1,520 

1,350 

1,320 

1,220 

1,010 

870 

760 

670 

610 

500 


3,320 

3,050 

2,540 

2,180 

2,120 

1,900 

1,690 

1,660 

1,520 

1,270 

1,090 

950 

840 

760 

630 

4,770 

4,150 


3,180 

2,720 

2,650 

2,380 

2,120 

2,070 

1,900 

1,590 

1,360 

1,190 

1,060 

950 

790 



4,880 

4,070 

3,490 

3,390 

3,050 


2,650 

2,440 

2,030 

1,740 

1,520 

1,350 

1,220 


6,680 


5,340 

4,450 



3,340 

2,970 

2,900 

2,670 

2,220 

1,900 

1,670 

1,480 

1,330 


7,630 

6,640 


5,090 

4,360 

4,240 


3,390 

3,320 

3.050 

2,540 

2,180 

1,900 

1,690 

1,520 

1,270 

9,540 

8,300 

7,630 

6,360 

5,450 

5,300 

4,770 

4,240 

4,150 


3,180 

2,720 

2,380 

2,120 

1,900 

1,590 

12,000 

10,400 

9,620 

8,020 

6,870 

6,680 


5,340 

5,230 



3,430 

3,000 

2,670 

2,400 

2,000 

15,200 

13,200 

12,200 

10,100 

8,730 

8,480 

7,630 

6,790 

6,640 


5,090 

4,360 


3,390 

3.050 

2,540 

19,000 

16,600 

15,200 

12,700 



9,540 

8,480 

8,300 

7,630 

6,360 

5,450 

4,770 

4,240 


3,180 

23,800 

20,700 

19,000 

15,900 

13,600 

13,200 

11,900 



9,540 

7,950 

6,820 

5,960 

5,300 

4,770 

3,970 

WET & DRY DIAMOND CORE APPLICATIONS 

Hardness 

Hard 

& Dense 

Soft & 

Abrasive 

Material DSDC 

(dry) 

Class A engineering bricks 

Flint aggregate common 

Class B engineering bricks 

Lightly reinforced concrete 

Concrete 

Hard York Stone 

London Brick 

General House Brick 

Handmade bricks 

Facing bricks 

Lightweight concrete block 

Breeze block 

Abrasive sand / grit stone 


CORE SPECIFICATION 

DDC 

(dry) 

DPDC 

(dry) 

DRY CORE SPEED RECOMMENDATIONS 

DPWC 

(wet) 

CORE SIZE 

22mm 

• Speed may be adjusted to suit site conditions. 

• For very abrasive materials an increase 

28mm 

in drill speed (rpm) will prolong life. 

32mm 

• For harder materials, decrease the 

38mm 

drill speed to prevent overheating. 

42mm 

• Machine and material are the controlling 

48mm 

factors to the life and speed of the core. 

52mm 

65mm 

78mm 

102mm 

107mm 

117mm 

127mm 

152mm 

158mm 

• Ultimately, machine and operator determine 

the overall performance. 

RPM 380 440 520 570 625 750 860 1030 1280 1400 1600 1760 1900 2380 3000 

ORDER LINE: 01909 552470

PRODUCT IDENTIFICATION 

LABELLING & PRODUCT ETCHING 

BLADE 

DIMENSIONS 

& MAXIMUM 

WORKING 

SPEED 

USE & 

SAFETY 

PICTOGRAMS 

DURO 

SPECIFICATION 

MATERIAL 

APPLICATION 

DURO ISO CER- 

DIRECTION 

OF ROTATION 

UNIQUE 

SERIAL 

NUMBER 

USAGE 

HINTS 

DIMENSIONS 

SAFETY 

PICTOGRAMS 

MACHINE USE 

PIC- 

ASPHALT 

BRAND NAME/ 

PERFORMANCE LEVEL 

PRODUCT APPROVED BY 

ORGANISATION FOR THE 

SAFETY OF ABRASIVES 

BRAND NAME/ 

PERFORMANCE LEVEL 

77 

DIRECTION 

OF ROTATION 

EUROPEAN MANUFACTURING STANDARD 

BAR CODE 

EUROPEAN MANU- 

FACTURING 

STANDARD 

PRODUCT 

APPROVED BY 

ORGANISATION 

FOR THE SAFETY 

OF ABRASIVES 

MAX SPEED 

IN RPM 

MATERIAL 

APPLICATION 

DURO 

SPECIFICATION

NOTES 

78

TERMS & CONDITIONS 

TERMS & CONDITIONS OF SALE 

Conditions of Sale – DURO UK Limited 

1. Definitions 

1.1 “Buyer” means the person who buys or 

agrees to buy the goods from the seller 

1.2 “Conditions” means the terms and 

conditions of sale set out in this 

document and any special terms and 

conditions agreed in writing by the seller 

1.3 “Delivery date” means the date specified 

by the seller when the goods are to be 

delivered 

1.4 “Goods” means the articles which the 

buyer agrees to buy from the seller 

1.5 “Price” means the price for the goods 

excluding carriage, packing, insurance 

and VAT 

1.6 “Seller” means DURO UK Limited 

of Sheffield in the county of South 

Yorkshire. 

2. Conditions Applicable 

2.1 These conditions shall apply to all 

contacts for the sale of goods by the 

seller to the buyer to the exclusion of 

all other terms and conditions including 

any terms of purchase or similar 

documentation supplied by the buyer at 

point of order. 

2.2 All orders for goods shall be deemed 

to be an offer by the buyer to purchase 

goods pursuant to these terms. 

2.3 Acceptance of delivery of delivery of 

goods shall be deemed conclusive 

evidence of the buyer’s acceptance of 

these conditions. 

3. Price & Payment 

3.1 The price shall be the sellers quoted 

price. The price is exclusive of VAT at 

the current rate. 

3.2 Payment of the price and VAT shall be 

due and payable on the date shown on 

the invoice. Time for payment shall be of 

the essence. 

3.3 If the buyer is a limited company or 

alternatively a partnership, and fails to 

pay the price in accordance with the 

seller’s terms as noted in the date 

specified on the invoice, the directors or 

partners of that limited company or 

partnership shall be jointly and severally 

liable to pay to the seller any unpaid 

invoice as addressed to the buyer. 

Any demand for payment by the seller 

to any one or more of the directors or 

partners of the buyer shall be deemed 

to be a demand made to all such 

persons as are jointly and severally liable 

upon the default of the buyer. The seller 

shall be at liberty to release or discharge 

from liability any one or more of the 

directors or partners of the buyer, or 

to compound with, accept compositions 

from or make any other arrangements 

with any of the directors or partners, 

without in consequence releasing or 

discharging any other party which is 

subject to the seller’s conditions, or 

otherwise prejudicing or affecting the 

seller’s rights and remedies against 

such party. 

4. The Goods 

4.1 The quantity and description of the 

goods shall be as set out in the seller’s 

quotation. 

5. Warranties and liability 

5.1 The seller warrants that the goods will 

at the time of delivery correspond to the 

description given by the seller. 

5.2 It is the responsibility of the of the buyer 

to return any faulty goods sufficiently 

packaged so as to avoid damage 

PLEASE CONTACT 

in transit, along with the original 

documentation to the seller’s address 

shown in clause 1.6 above. No refund 

will be issued until the goods are 

received as aforesaid. 

5.3 In the event that upon inspection or 

testing the returned goods are found 

to be free of any faults, the seller may 

refuse to issue a full refund or make a 

reasonable charge for time spent 

6. Delivery of Goods 

6.1 Delivery of goods shall be made to the 

buyer’s address or as instructed by the 

buyer on the delivery date. The buyer 

shall make all arrangements to accept 

delivery of the goods whenever they are 

tendered for delivery. 

6.2 While the seller will endeavour to deliver 

the goods by any date or within any 

period agreed upon, such dates and 

periods are only estimates given in good 

faith and the seller will not be liable for 

any failure to deliver by such a date or 

within such a period. The seller will also 

not be liable for any costs arising from 

such failure. 

7. Acceptance of Goods 

7.1 The buyer shall be deemed to have 

accepted goods 48 hours after delivery 

to the buyer. 

7.2 After acceptance the buyer shall not be 

entitled to reject goods, which are not in 

accordance with the contract. 

8. Title and Risk 

8.1 The goods shall remain the property of 

the seller until 

8.1.1 The buyer has paid for the goods in full 

including VAT at the current rate. 

8.1.2 No other sums whatever shall be due 

from the buyer to the seller. 

8.2 The goods shall be at the buyers risk as 

from delivery. 

8.3 Until property of the goods passes to 

the buyer in accordance with clause 

8.1, the buyer shall hold the goods 

and each of them on a fiduciary basis 

as bailee for the seller. The buyer shall 

store the goods (at no cost to the seller) 

separately from all other goods in its 

possession and marked in such a way 

that they are clearly identifiable as the 

seller’s property. 

8.4 Not withstanding that the goods (or 

any of them) remain the property of 

the seller, the buyer may sell or use 

the goods in the course of the buyers 

ordinary business at full market value 

for the account of the seller. Any such 

sale or dealing shall be a sale or use 

of the seller’s property by the buyer on 

the buyer’s own behalf and the buyer 

shall act as principal whilst making such 

sales or dealings. Until property of the 

goods passes to the buyer the entire 

proceeds of sale or otherwise of the 

goods shall be held in trust for the seller 

and shall not be mixed with any other 

money or paid into any overdrawn bank 

account and shall be at all material times 

identified as the sellers money. 

8.5 The seller shall be entitled to recover the 

price including VAT not withstanding 

that the property in any of the goods 

has passed from the seller. 

8.6 Until such time as the property of the 

goods transfers to the buyer from the 

seller, the buyer shall upon request 

deliver such goods as have not ceased 

to be in existence or resold to the seller. 

If the buyer fails to do so the seller 

may enter upon any premises owned 

79 

occupied or controlled by the buyer 

where the goods are situated and 

repossess the goods. On the making of 

such a request the rights of the buyer 

under clause 8.4 shall cease. 

8.7 The buyer shall not pledge or in any 

way charge by way of security for any 

indebtedness any of the goods, which 

are the property of the seller. Without 

prejudice to the other rights of the seller, 

if the buyer does so all sums whatever 

owing by the buyer to the seller shall 

forthwith become due and payable. 

8.8 The buyer shall insure and keep insured 

the goods to the full price against “all 

risks” to the reasonable satisfaction 

of the seller until the date that the 

property of the goods passes to the 

buyer and shall whenever requested by 

the seller produce a copy of the policy 

of insurance. Without prejudice to the 

other rights of the seller, if the buyer 

fails to do so all sums whatever owing 

by the buyer to the seller shall forthwith 

become due and payable. 

8.9 The buyer shall promptly deliver the 

prescribed particulars of this contract 

to the registrar in accordance of 

the companies act 1985 part XII as 

amended. Without prejudice to the 

other rights of the seller, if the buyer 

fails to do so all sums whatever owing 

by the buyer to the seller shall forthwith 

become due and payable. 

9. Remedies of Buyer 

9.1 Where the buyer rejects any goods then 

the buyer shall have no further rights 

whatever in respect of the supply to the 

buyer of such goods or the failure by the 

seller to supply goods which conform to 

the contract of sale. 

9.2 Where the buyer accepts or is deemed 

to have accepted any goods then the 

seller shall have no liability whatever to 

the buyer in respect of those goods. 

9.3 The seller shall not be liable to the buyer 

for late delivery or short delivery of the 

goods. 

The provisions of this clause shall apply 

to rights claims or liability arising directly, 

consequently or otherwise. 

10. Proper Contract of Law 

10.1 This contract is subject to the law of 

England and Wales. 

11. Order Value and Carriage Terms 

• A minimum order value of £50.00 

applies to all orders. 

• Every effort will be made to despatch 

orders received before 4.00pm, on 

the same day, although this cannot be 

guaranteed. 

• Standard transportation will be NEXT 

WORKING DAY (free on orders over 

£150.00 net, £9.00 under £150.00 net) 

• Alternative transportation services are 

available on all orders as detailed below: 

º NEXT WORKING DAY before 10.00a.m. 

- £17.00 (£8.00 for orders over 

£150.00 net) 

º NEXT DAY Saturday delivery before 

12.00p.m. - £34.00 (£25.00 for orders 

over £150.00 net) 

º Minimum carriage paid order value 

for Northern Ireland is £250.00 net. 

Transport is minimum 2 days. 

º Certain UK postcodes will require 2 day 

delivery. Please discuss on placement 

of order. 

YOUR DISCOUNT 

FROM LIST:

DURO UK LTD / LOW COMMON ROAD / 

BROOKLANDS PARK INDUSTRIAL ESTATE / 

DINNINGTON / SHEFFIELD / S25 2RJ 

T: 01909 552470 

F: 01909 552472 

E: info@duro-diamonds.co.uk 

DURO EUROPE nv/sa / 

NIJVERHEIDSSTRAAT 20 / 

B-2160 WOMMELGEM / BELGIUM 

T: +32 (0)3 355 4140 

F: +32 (0)3 355 4149 

E: info@duro-diamonds.be 

www.duro-diamonds.com

DURO PRICE LIST 10 internal pages V6 USE.indd

Create successful ePaper yourself

Delete template?

Save as template?