2006 - Junior T

More documents

Recommendations

Info

© Marzocchi Suspension2006 - Junior TOn request, special adapters (5) are available to install handlebars with a different diameter.
© Marzocchi Suspension2006 - Junior TDismantling: Removing the top capsPut the fork in the vice in vertical position, fixing it by the dropouts.With the 21mm socket spanner loosen the lock cap (1).Remove lock cap (1).Dismantling: Draining the oilPull the top washer (1), the preload tube (2), the top spring (3), the bottom washer (4) and the bottomspring (5) off both legs.Free the fork from the vice and tip it into a container of a suitable size to drain the oil; compress the forka few times to help the oil flow out.Do not pour used oils on the ground.Dismantling: Breaking down the steering crown unit / arch-slider assemblyUse the special spanner to remove the bottom nuts. Do not use other tools.Turn the arch-slider assembly upside down.Using the special 12mm spanner (A), loosen the bottom nuts (1) of both legs.Pull the bottom nuts (1) complete with O-rings (2) out of both legs.
Page 4 and 5: © Marzocchi Suspension2006 - Junio
Page 8: © Marzocchi Suspension2006 - Junio
Page 11: © Marzocchi Suspension2006 - Junio

2006 - Junior T

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?