WEICONLOCK White Line - Weicon.com

Pen System ®WEICONLOCK ® »White Line«Overview of types:AN 301-43 Threadlocking, medium-strength,– marking-free –AN 301-70 Threadlocking, high-strength,– marking-free –AN 301-72 Pipe and flange sealing with PTFE, mediumstrength,resistant to high temperatures,–marking-free –AN 301-38 Retaining cylindrical assemblies, high-strengthAN 301-48 Retaining cylindrical assemblies, high-strength,resistant to high temperaturesNewWEICONLOCK in liquid conditionType AN 301-43 AN 301-70 AN 301-72 AN 301-38 AN 301-48Approvals:NSFDVGW***NSFApplication: Threadlocking ThreadlockingCharacteristics:Colour:For threadedconnections up to:Viscosity at+25°C in mPa·sBrookfield:medium-strengthhigher-viscositymarking-freehigh-strengthmediumviscositymarking-freeNSFDVGW***Pipe and flangesealing withPTFEmedium-strengthhigh-viscositymarking-freeNSFRetainingcylindricalassemblieshigh-strengthmediumviscosityNSFDVGW***Retainingcylindricalassemblieshigh-strengthmediumviscosityblue green white green greenfluorescentM 36 M 25 M 80 R 3" M 36 M 20 R ¾"2,000 – 8,000mediumthixotropic500 – 900mediumthixotropic450 – 65015,000 – 60,000highly thixotropic 2,000 – 3,000 mediumthixotropicDensity (g/cm 3 ): 1.12 1.10 1.00 1.10 1.10WEICON GmbH & Co. KGKönigsberger Str. 255 · DE-48157 MünsterP.O. Box 84 60 · DE-48045 Münster · GermanyTel. +49 (0) 251 / 93 22-0Fax +49 (0) 251 / 93 22-244Fax +49 (0) 251 / 93 22-233 Exportwww.weicon.de · info@weicon.deWEICONMiddle East L.L.C.Jebel Ali Ind Area 3P.O. Box 118 216Dubai · U.A.EPhone +971 4 880 25 05Fax +971 4 880 25 09Mobile +971 50 545 99 83www.weicon.aeinfo@weicon.aeDistributed by:WEICON Inc.20 Steckle Place · Unit 20Kitchener · Ontario N2E 2C3CanadaPhone +1 519 896 5252Fax +1 519 896 5254Cell +1 519 590 5168www.weicon.cainfo@weicon.caMax. gap fillingin mm:Breakawaystrength* Nm(thread, DIN 54454):Prevailing strength*Nm (thread):Shear strength**N/mm² (DIN 54452):Handling strength atroom temperature(minutes):Final strength at roomtemperature (hours):Temperatureresistance (°C):0.25 0.15 0.30 0.20 0.15WEICONLOCK in cured condition18 – 22 25 – 35 5 – 10 30 – 40 25 – 309 – 11 40 – 50 4 – 6 45 – 60 40 – 5510 – 13 14 – 20 5 – 7 20 – 25 25 – 305 – 15 5 – 15 15 – 30 approx. 5 2 – 61 – 3 5 – 10 6 – 12 2 – 4 2 – 4-60 to +150 -60 to +150 -60 to +200 -60 to +150 -60 to +175* Determined on M 10 x 20 screw - quality 8.8 galvanised - 0.8d nut (without pre-tensioning)** Compression shear strength determined on cylindrical parts approx. 13 mm dia., clearance (D-d) = 0.05 mmm, l/d = 0.88*** Attention: The permanent use of WEICONLOCK in connections containing copper, which come into contact with water> 40°C is not recommended without thorough prior testing on original parts. Not permissible for gas home installationaccording to TRGI 86/96. Tested according to DVGW (DIN EN 751-1) and KTW.Delivery forms:The WEICONLOCK »White Line« is available in the sizes 50 mland 200 ml Pen System.Notes on application:Apply WEICONLOCK evenly while making sure to avoid directcontact between the dispensing tip and metal. Apply to screws andbolts in the shape of a ring. Do not pour WEICONLOCK, which hasalready come into contact with metal, back into the pen; even thesmallest metallic particles will result in curing.The specifications and recommendations given in this brochure must not be seen as guaranteed product characteristics. They are based on our laboratorytests and on practical experience. Since individual application conditions are beyond our knowledge. control and responsibility. this information is providedwithout any obligation. We do guarantee the continuously high quality of our products. However. own adequate laboratory and practical tests to find outif the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibilityfor non-appropriate or other than specified applications.