Inogen G3

More documents

Recommendations

Info

User ControlsON / OFF ButtonPress once to turn “ON”; Press and hold for one second to turn “OFF”.Audible Alarm ButtonPressing this button will toggle the Inogen One® G3’s breath detectionaudible alert on and off:1. Default Mode. When the Inogen One® G3 is powered up, the breathdetection audible alert is disabled. The display’s mode indication areawill show a bell icon crossed out with an X in default mode.2. Breath Detection Alert Mode. The Inogen One® G3 will alert withaudible and visual signals for “no breath detected” when this modeis enabled and no breath has been detected for 60 seconds.At 60 seconds, the device will enter into auto pulse mode and onceanother breath is detected, the device will exit auto pulse mode anddeliver normally on inspiration. The display’s mode indication area willshow a bell icon, flashing red light and display message when thealert is enabled.3. If power is lost, breath detection alert mode resets todefault mode.Flow Setting Control ButtonsUse the – or + flow setting control buttons to select the settingas shown on the display. There are four settings, from 1 to 4.Display Backlight ButtonPush on; automatically turns off after 10 seconds.User InterfacesDisplayThis screen displays information regarding flow setting, powerstatus, battery life and errors. If you would like to change thelanguage on the Inogen LCD Screen contact Inogen Client Services.4
User Interfaces (continued)Indicator LightsA red light indicates either a change in operating status or acondition that may need response (alarm). A flashing light ishigher priority than non-flashing.EnglishAudible SignalsAn audible signal (beep) indicates either a change in operatingstatus or a condition that may need response (alarm). Morefrequent beeps indicate higher priority conditions.Input / Output ConnectionsParticle FiltersThe filters must be in place at the intake end of the concentratorduring operation to keep input air clean.Cannula Nozzle FittingThe nasal cannula connects to this nozzle for Inogen One® G3output of oxygenated air.DC Power InConnection for external power from the AC power supply orDC power cable.USB PortUsed for servicing only.Description of the Inogen One® G3 Oxygen Concentrator Chapter 2 5
Page 3: ContentsEnglishChapter 1 1 Intended
Page 10 and 11: Power Supply OptionsSingle and Doub
Page 12 and 13: Inogen One® G3 AccessoriesWARNING!
Page 15 and 16: 3Operating InstructionsEnglishGener
Page 17 and 18: NOTEWhen the power supply is discon
Page 19 and 20: Additional Operating InstructionsFo
Page 21 and 22: When battery life is low, do one of
Page 23 and 24: 4Inogen One® G3 OxygenConcentrator
Page 25 and 26: Informational MessagesThe following
Page 27 and 28: Low Priority Alerts (continued)Mess
Page 29 and 30: High Priority AlertsCAUTIONIf you a
Page 31 and 32: 5TroubleshootingEnglishSolutions to
Page 33 and 34: 6Cleaning, Careand MaintenanceEngli
Page 35 and 36: 4. Install a replacement fuse, Inog
Page 37 and 38: Inogen One® G3 Column Change Proce
Page 39 and 40: 7Symbols UsedOn Concentratorand Acc
Page 41 and 42: 8InogenOne® G3 ConcentratorDimensi
Page 43 and 44: ELECTROMAGNETIC COMPATIBILITYThis C

Inogen G3

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?