SHOCKSTAR DC Relay Detonator - Austin Detonator sro

SHOCKSTARDC Relay DetonatorNon-ElectricDESCRIPTIONSHOCKSTAR DC Relay detonators are especially designed toprovide accurate delay timing between the individual rows of blastholes using detonating cord as a primary initiation system. Theycan be used for developing various delay patterns.DC Relay consists of a 45 cm shock-tube, two detonators andtwo plastic blocks. The detonators are attached to each end ofthe shock tube and are inserted into plastic connector blocks.The connector blocks are specially designed for fast and easydetonating cord connections. There are 8 different delays available- from 9 ms up to 200ms.BENEFITS• 400 mg PETN base charge ensures reliable initiation of 5g detonating cord.• Connector blocks color coded to the delay time of the detonators.• Delay tag that lists delay time.• Bidirectional use.PROPERTIESSHOCKSTAR DC Relay Nominal DelaysMS nominal Delay 9 17 25 35 50 65 100 200PACKAGINGCase Count: 60 pcsCase Weight: 5,3 kgCase dimension: 385 x 235 x 282 mmSTORAGEFor best performance store in magazines with temperatures between -30 and 40 °C. Store in accordance with all applicable local,state, provincial and federal laws.SHELF LIFEFor optimum accuracy, use within 2 years from the date of manufacture in original packaging and under storage conditions mentionedabove.SHIPPING CLASSIFICATIONShipping Name: Detonator Assemblies, Non ElectricClass & Division: 1.4BUN Number: 0361T R A D I T I O N O F S A F E T Y , S T R E N G T H A N D S E R V I C E

N o n - E l e c t r i c | I n s t r u c t i o n o n c o n n e c t i n gSTANDARD HOW TO MAKE TECHNICAL CONNECTION? DESCRIPTIONSteps to follow to make the connection:1. 2. 3.4. 5. 6.Notice: For easy connection it is important to have a clean cut of the detonating cord. Place the cord on a wooden plate and cutthe cord at right angles using a sharp knife.BLASTING PATTERNSimple designed blasting pattern using detonating cordDisclaimer of Warranties and Limitations of LiabilitiesProduct described in this bulletin are sold by Austin Detonator s.r.o. without warranty; express implied or statutory or as to MERCHANTABILITY, except as expressly stated in AustinDetonator straight bill of lading. Under no circumstances shall seller be liable for loss of anticipated profits, consequential or incidental damages.The product described may be subject to change.For more information and service locations in your area, please contact:Austin DetonatorPhone: +420 571 404 001Jasenice 712Fax: +420 571 404 002755 01 VsetínWeb: www.austin.czCzech Republice-mail: marketing.info@austin.cz© Austin Detonator | v. 120314