Paper Template - Pottery Barn

5. Attach the paper template onto the wall noting the insertion points for the mounting hardware( not included). Bothholes in the template should be exactly 73.5 inches from the ground vertically. To ensure properinstallation, use a carpenter’s level Drill through the holes in the template and into the wall. insert your mountinghardware.6. Gently lift the assembled wall shelf into standing position ( Fig.4) and raise the shelf slightly until the keyholes onthe back of the shelf meet the screws placed in the wall from the previous step. Slide the shelf down until thescrews are fully inserted in the tops of the keyholes. Be sure wall shelf is stable.7. Assembly is complete.Fig. 4Adjusting Levelers:Due to an uneven floor the furniture may not sit level due causing it to wobbles. If the piece wobbles, determine whichcorner does not touch the ground correctly. With two people follow these steps:1. Carefully elevate the item slightly to provide access to the levelers attached to the bottom. (Fig. 5).2. Turn the levelers until adequate contact will be made with the floor. Gently set down the piece and check stability.3. Repeat steps until furniture sits firmly on the ground.AdjustableLevelerFig. 5Care Instructions:• Dust with a clean, soft damp cloth and wipe dry immediately.• Avoid the use of chemicals and harsh cleaning agents.thank you for your purchasestores | catalog | www.potterybarn.com