Clear-Vu Loading Systems LOADERS - Maguire Products

LOADERSVenturi Loading SystemsMaguire Venturi Loaders keep your hopperfilled automatically and are available with bothvisual and audible alarms to warn if the loaderfails to fill the hopper completely. The controlcan accommodate up to 4 switches to control4 venturi loaders.Choose from Four ModelsModel MLModel ML automatically loads material at ratesup to 200 lb/hr. A low-level sensor signals anair solenoid to begin loading. Loadingcontinues until the sensor is covered. An inlineON/OFF switch is located on the powercord of the loader.Model ML-AModel ML-A adds audio and strobe lightalarms to the Model ML, which alert theoperator to exhausted material supply orstoppages. If loader “ON” time exceeds twominutes, a STROBE light will flash, and anelectronic beeper will sound continuously untilfloor personnel respond.Model MPL-ASModel MPL-AS adds an additional timer and amaterial-shutoff valve to the alarm-equippedModel ML-A. If floor personnel do not satisfythe alarm condition within five minutes, amaterial flow valve is activated. This valvediscontinues the flow of natural material to theprocess, thereby preventing the process fromcontinuing.Model ML-1R Regrind LoaderModel ML-1R is designed specifically forregrind. A larger diameter air amplifier isused to maximize airflow for efficient conveyingof regrind. With a vertical conveyingdistance up to 12 ft., the ML-1R will conveyregrind up to 200 lb/hr. This unit is veryeffective for emptying beside-the-pressgranulator drawers equipped for vacuumtakeoff or for conveying regrind from acontainer using a regrind pick-up lance. TheML-1R venturi loader is designed for regrindonly and will not convey pellets.Model ML-1R Shown31