12.07.2015 Views

Instruction Manual - Avanti Products

Instruction Manual - Avanti Products

Instruction Manual - Avanti Products

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

OPERATING YOUR BEVERAGE COOLERIMPORTANT SAFEGUARDSDo not store food in Beverage Center, as interior temperature may not get cool enough to preventspoilage.As a natural result of condensation, in summer months or areas of high humidity, the glass doormay build up moisture on the outside. Just wipe it away.If the ambient temperature is above or below recommended temperatures, the performance of theunit may be affected. For example, placing your unit in extreme cold (under 45ºF) or hot conditions(over 110ºF) may cause interior temperatures to fluctuate. The range of 34º-43ºF (1º-6ºC) may not bereached.Your Beverage Cooler is designed to operate with at a range of 34º - 43º F (1 – 6ºC).You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºCbutton/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperaturedisplay window.‣ ON/OFF POWERTo turn ON or OFF the appliance, press the button/mark .‣ SETTING THE TEMPERATURE CONTROLYou can press UP and DOWN buttons/marks to control the internal temperature .The degrees indicators will appear in the display window.The temperature that you desire to set will increase 1ºF or 1ºC if you push the UPbutton/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push theDOWN button/mark once.NOTE: If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restartingthe unit. If you attempt to restart before this time delay, the Beverage Cooler will not start. When you use the Beverage Cooler for the first time or restart the Beverage Cooler after havingbeen shut off for a long time, there could be a few degrees variance between the temperature youselect and the one indicated on the LED readout. This is normal and it is due to the length of theactivation time. Once the Beverage Cooler is running for a few hours everything will be back tonormal. Do not remove storage baskets otherwise cans or bottles may stick to the inner surface ordevelop excessive frost.10

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!