MAINTENANCE MANUAL - Meritor

DisassemblyFigure 8Figure 10Speed Shift RemovingA. Hit the caps and the hinge pin of the fork,using a brass pointer and a plastic hammerstrokes (Figure 9);WARNING:The pin should be removed by the upper side ofthe differential, because its housing is scaled.B. Simultaneously remove the fork and theSun gear (Figure 10);NotE:C. To remove the locking plate, loosen its fasteners.CAUTION:DO NOT HAMMER THE PLATE DIRECTLYOR INSERT CHISEL AND WEDGES BETWE-EN THE PLATE AND THE DIFFERENTIALCASE TO AVOID IRREVERSIBLE DAMAGEIN THESE PARTS. (Figure 11).• Loosen the nut and the Ring Gear screw (Figure112).If necessary, turn the sun gear to make it easierto remove.Figure 11Figure 9MAINTENANCE MANUAL11