Flexible Heaters line Guide

Flexible Heaters3100 Series 3200 SeriesDescription silicone wire-wound silicone chemically-etchedMaximum power 16 W/cm 2 [40 W/in 2 ] 16 W/cm 2 [40 W/in 2 ]Operating/storage temperaturerange250 °C [482 °F] max.200 °C [392 °F] max. (UL)250 °C [482 °F] max.200 °C [392 °F] max. (UL)Size constraints none, virtually any size and shape 0,61 m x 0,61 m [24 in x 24 in]Geometryspecific to customer requirementsspecific to customer requirements withinsize constraintsHeater trace pattern specific to customer requirements specific to customer requirementsConstructionStandard wire typePSA (Pressure SensitiveAdhesive)Contains resistive wire encased betweentwo layers of fiberglass-supportedsilicone rubber. All bonding adhesivesare uncured silicone rubber. Curedunder pressure and temperature duringmanufacturing.• UL 1180 Teflon• gauge per customer request• otherwise selected for max. heatercurrent drawyesContains resistive foil traces encased betweentwo layers of fiberglass-supportedsilicone rubber bonded together usingtemperature and pressure. Heater tracepatterns generated similar to processesused in printed circuit board design andmanufacture.• UL 1180 Teflon• gauge per customer request• otherwise selected for max. heatercurrent drawyeswww.honeywell.com/sensing 3

Warranty. Honeywell warrants goods ofits manufacture as being free of defectivematerials and faulty workmanship.Honeywell’s standard product warrantyapplies unless agreed to otherwise byHoneywell in writing; please refer to yourorder acknowledgement or consult yourlocal sales office for specific warrantydetails. If warranted goods are returned toHoneywell during the period of coverage,Honeywell will repair or replace, at itsoption, without charge those items it findsdefective. The foregoing is buyer’s soleremedy and is in lieu of all warranties,expressed or implied, including thoseof merchantability and fitness for aparticular purpose. In no event shallHoneywell be liable for consequential,special, or indirect damages.While we provide application assistancepersonally, through our literature andthe Honeywell web site, it is up to thecustomer to determine the suitability of theproduct in the application.Specifications may change without notice.The information we supply is believed tobe accurate and reliable as of this printing.However, we assume no responsibility forits use.For more information about Sensing andControl products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to info.sc@honeywell.comWARNINGPERSONAL INJURY• DO NOT USE these products assafety or emergency stop devicesor in any other application wherefailure of the product could result inpersonal injury.Failure to comply with theseinstructions could result in death orserious injury.WARNINGMISUSE OF DOCUMENTATION• The information presented in thiscatalogue is for reference only. DONOT USE this document as productinstallation information.• Complete installation, operation andmaintenance information is providedin the instructions supplied with eachproduct.Failure to comply with theseinstructions could result in death orserious injury.Sensing and ControlAutomation and Control SolutionsHoneywell1985 Douglas Drive NorthGolden Valley, MN 55422 USA+1-815-235-6847www.honeywell.com/sensing009032-1-EN IL50 GLOJune 2008Copyright © 2008 Honeywell International Inc. All rights reserved.