MODEL: WITNESS SEMI-AUTOMATIC PISTOL - EAA

8) Now remove the compensated barrel by pulling itforward out of the end of the slide. See Figure 52.SAFE USE OF PORTED ANDCOMPENSATED PISTOLSIf you are shooting our WITNESS EA Standard SteelPorted, Poly Ported models or our CompetitionCompensated Gold Team, Silver Team or Carry Comppistols in 9mm, 40S&W, .38super, .45ACP, or 10mmyou should always wear shooting glasses and hearingprotection while shooting these pistols. Gases andsmall particles of powder may be blown through theseopenings. You should never shoot these pistols fromyour side or close to any spectators. See Figure 53for an example of a ported barrel and Figure 54 for anexample of a compensated barrel.Figure 52Figure 53MANUFACTURER’S WARNING:This firearm was manufactured to properly perform withthe original parts as designed. It is your duty to makesure any parts you buy are correctly installed and thatneither replacements nor originals are altered orchanged. Your gun is a complex tool with many partsFigure 54that must relate correctly to other parts for safe andaccurate operation. Putting a gun together wrong or with modified parts can resultin a damaged gun, or personal injury or death to you or others. Always let aqualified gunsmith work on your gun or at least, check any work not performed bya gunsmith. Firearms safety is your primary concern. THE GUN OWNER MUSTACCEPT FULL RESPONSIBILITY FOR THE CORRECT REASSEMBLY ANDFUNCTIONING OF THE FIREARM AFTER ANY DISASSEMBLY ORREPLACEMENT OF PARTS.TO CLEAN AND MAINTAIN YOUR PISTOL:A) Follow procedures for unloading pistol as described previously.B) Follow procedures for disassembly of pistol as described previously.C) Materials needed to clean this pistol are: a cleaning rod, cotton bore patches,brass bore brush, powder solvent, a small soft brush and good quality gun oil.WARNING: Lead or lead compounds are known to the State of California tocause cancer, birth defects, reproductive toxicity, and other serious physical20