MAERSK resilient - Maersk Drilling

Maersk DrillingMaersk ResilientKey featuresDRAW WORKSWirth GH 4500 EG-AC with three AC motors & gears.Grooved for 1 ¾” drill line.TRAVELLING EQUIPMENTMaritime Hydraulic traveling block. Capacity 680 t, groovedfor 1 ¾”.TOP DRIVE AND PIPE HANDLINGMaritime Hydraulic DDM-750-AC, 680 t capacity, with pipehandler and block retract system. Powered by one air-cooledAC motor. Max. continuous torque 60,400 ft/lbs at 98 rpmand max. intermittent torque of 84,800 ft/lbs.Maritime Hydraulic bridge crane with lower guiding arm.Lifting capacity of 13.5 SWL. Racker head tubular capacity3 ½” – 14”.Maritime Hydraulic Torque Master (Iron Roughneck) withtorque/turn capability. Tubular handling range 2 ⅞”–20”.Handles DP, DC, stabilizers bits, casing, tubing & liners.Maritime Hydraulic Auto Roughneck MH 1899, tubular rangefrom 3 ½” drill pipe to 9 ½” drill collars, handles drill pipe,HWDP, drill collars and BHA components.ROTARY TABLEMaritime Hydraulic type RTSS 49 ½” rotary table with36,880 ft/lbs. from 0 – 10 rpm. max. load 725 t.MUD PUMPSThree Wirth TPK 7 ½” x 14”. 2,200 hp, rated for 7,500 psi.CEMENTING EQUIPMENT15,000 psi wp. On free placement agreement.WELL CONTROL EQUIPMENTHydril Compact 18 ¾” – 15,000 psi BOP consisting of one10,000 psi annular + two 15,000 psi double ram preventers.Diverter system, 500 psi.MUD RETURN SYSTEMFour Swaco BEM 650 high performance shale shakers.Two Swaco vacuum degassers. The rig is prepared for aslurrification unit with a slurry holding tank.DRIVE PIPE SUPPORT DECKTexas deck with combined load capacity of 150 t, 75 t oneach side. Skidable in transverse direction with 75 t load.TENSIONER SYSTEMVertical conductor tensioning system consisting of four100 t hydraulic cylinders in combination with 95 t horizontalload.DRILLING INSTRUMENTATIONMaritime Hydraulic “Drill View” drilling instrumentation.POWER SUPPLYFour main A. Van Kaick/DSG 114M1 generator sets with acontinious power rating of 2,675 KAV@cos phi 0,9 each.CRANESTwo cranes with 47.3 m (155 ft) boom, 80 t static and 40 tdynamic load. One knuckle boom crane with 25 m (82 ft)reach, 12 t load, 5 t winch.HELICOPTER DECK22.6 m (74 ft) diameter helicopter deck suitable for EH-101and Sikorsky S-61N helicopter.SAFETY EQUIPMENTLifesaving and fire fighting equipment in accordance withDanish Maritime Authority, UK HSE Safety Case and Class.ACCOMMODATIONAccommodation is located in two blocks shaped as a “V”,wrapped around the forward leg. Port block is a quiet areawith cabins – starboard block holds all offices, recreationrooms and service facilities. 120 people in two-man roomswith full facilities.

Maersk DrillingMaersk ResilientQUARTERSSIDE VIEW

October 2014Head office:Maersk Drilling50, Esplanaden1098 Copenhagen KDenmarkTelephone: +45 3363 3363Telefax: +45 3363 3182E-mail: copenhagen@maerskdrilling.comwww.maerskdrilling.comFollow us to learn morewww.maerskdrilling.comwww.facebook.com/MaerskDrillingwww.linkedin.com/company/maerskdrillingwww.twitter.com/maerskdrillingwww.vimeo.com/maerskdrillingwww.youtube.com/user/Maerskcomwww.instagram.com/maerskdrilling“DISCLAIMER: This brochure is for promotional purposes only. All descriptions, specifications and other information contained in this brochure and/or in any accompanying material is: (i) intended to give only a general indication of the sortsof service or equipment or performance that might be available (ii) intended to be no more than an invitation to treat (iii) subject to contract and possible change or alteration at our discretion and without notice to you (iv) not to be reliedupon by you for any purposes whatsoever when entering into any legally binding agreement with us.”