Dynamic characterization of a 3-D full scale steel-concrete ...
Dynamic characterization of a 3-D full scale steel-concrete ...
Dynamic characterization of a 3-D full scale steel-concrete ...
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ANNEX CDATA FILE LEGENDC1. Data filesAll experimental data available on digital support that may be obtained by contactingFabio Taucer at fabio.taucer@jrc.it or at TP480, Joint Research Centre, I-21020 (Va), ItalyFax +39-0332.78.90.49.C2. The file formatAlthough many file extensions are used, as explained in the next paragraph, all datafiles are in ASCII format. Data columns are separated from by tabulation.C3. The file identificationThe file name depends on the experimental configuration, the test phase, the test type,the force channel, the test number and the data type, as listed below:• experimental configurationA: global configuration (3 d.o.f. for every floor system – shear typemodel);B: local configuration (central frame, inner node);C: local configuration (central frame, external node);• test phase1: undamaged structure;2: damaged structure after 1.4 g PGA PSD test;3: damaged structure after 1.8 g PGA PSD test;• test type_ AVT:_ FVT:_ SHT:_ SST:Ambient Vibration Test;Forced Vibration Test;Shock Hammer Test;Stepped-Sine Test;• force channelFor those test types in which a force was imposed (Forced Vibration Test,Shock Test and Stepped-Sine Test), the forcing direction is reported inthe file name: the number following the test type identifies the channel <strong>of</strong>C-1