Colour Video Monitors PVM-9045QM/9042QM/9040ME PVM-6041QM

Colour Video MonitorsPVM-9045QM/9042QM/9040MEPVM-6041QM

SpecificationsGENERAL9045QM9042QMColour systemPAL/SECAM/NTSC/NTSC4.43The CRT type 22 cm (9-inch) HR Trinitron Tube, pursuit 22 cm of (9-inch) excellence Trinitron tube, in both pictureviewable area 19.1 cm (8-inch) measured diagonally, viewable area 19.1 cm (8-inch) measured diagonally,70° deflection, AG pitch 0.25 mm 70° deflection, AG pitch 0.5 mmResolution Composite video: 450 TV lines at centre performance Composite and video: operational 250 TV lines at features centre hasFrequency response 6.0 MHz (-3 dB)Aperture correction -4.0 dB to 6.0 dB (at 3.0 MHz)SynchronizationAFC time constant 1.0 msNormal scan6 % overscanUnderscan3 % underscanH linearityLess than 5 % (typical)V linearityLess than 5 % (typical)ConvergenceCentral: 0.43 mm (typical)Corner: 0.53 mm (typical)Raster size stability H: 1.0 %, V: 1.5 %HV regulation3.0 % (cut off to high light)Colour temperature D 65Operating temperature 0 to 35° C (32 to 95° F)Storage temperature -10 to 40° C (14° F to 104° F)Humidity0 to 90 % (no condensation)Power requirements AC: 100 to 240 V, 0.7 to 0.4 A, 50/60 are Hz DC:12V. essential 3.7 A in professional image display devices.Power consumption AC: 43 W, DC: 40 WINPUTVIDEO INPUTLINE A/LINEComposite video* 1 Loop-througn BNC1 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2Y/C* 1Loop-through Mini DIN 4-pinY (luminance):1 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2PVM-9045QMC (chrominance):NTSC: 0.286 Vp-p ±6 dB, automatic 75 Ω termination* 2PAL: 0.3 Vp-p ±6 dB, automatic 75 Ω termination* 2LINE BComposite video Loop-througn BNC1 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2RGB/COMPONENT (Y, R-Y, B-Y) BNCRed/R-Y:Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ΩSync on Green/Green/Y:Composite: 1.0 Vp-p ±6 dB, sync negativeNon-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ΩBlue/B-Y:Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ΩAUDIO INPUTLINE A/LINELoop-through Phono, -5 dBu, high impedanceLINEBLoop-through Phono, -5 dBu, high impedanceRGB/COMPONENT (Y, R-Y, B-Y) Loop-through Phono, -5 dBu, high impedanceExternal syncLoop-through BNCPVM-9042QM4.0 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2DCXLR 4-pinRemoteMini DIN 8-pin (with Tally)OUTPUTSpeaker outPHYSICAL CHARACTERISTICSMassDimensionsSUPPLIED ACCESSORIESREGULATION COMPLIANCEPVM-9040ME0.5 W, monauralApprox. 8.2 kg (18 lb) without batteriesApprox. 217 (W) x 217 (H) x 352.5 (D) mm (8 5/8 x 8 5/8 x 14 inches)AC power cordMini DIN 8-pin connector w/cable (cable length: 350 mm (13 7/8 inches)Tally number plated (12 pcs. (No.1 to 5, A, B, C, P, R, white x 2 pcs.)Operation instructionsEN 60 950 (TÜV), CE (EMC, LVD), C-Tick Markalways been the key factor in the success ofSony professional monitors. The Sony PVM-9045QM,9042QM, 9040ME and the PVM-6041QM Video Monitorsincorporate this concept in their design and embody theoutstanding reliability and superb picture quality thatWith models that offer a range of features, these newadditions to the PVM Series offer the flexibility thatmatches a broad spectrum of requirements.Looking at the specifications of individual models, thePVM-9045QM is a picture evaluation monitorincorporating an HR (High Resolution) Trinitron ® CRTthat provides an excellent centre resolution of 450 TVlines. The PVM-9042QM and 6041QM are suitable foruse as functional monitors in multi-purpose applications.The PVM-9045QM, 9042QM and 6041QM are equippedwith a component (Y/R-Y/B-Y or RGB) input facility andcan be operated on AC and DC power supplies forENG/EFP applications. They can also accept both 4:3and 16:9 aspect ratio signals. Alternatively, for basic4:3 monitoring, the PVM-9040ME has composite videoand Y/C inputs. These four monitors are also suited forstudio installation with their rack mounting option.So whether the application is picture evaluation orRear Panel / Dimensions352.5 (14)30 (1 3/16)basic video monitoring, in the studio or on location,this new range of compact monitors includes a model to217 (8 5/8)meet your needs.217 (8 5/8)163 (6 1/2)217 (8 5/8)PVM-6041QM15 60( 19/32) (2 3/8)263 (10 3/8)Unit: mm (inches)PVM-9045QM/9042QM163 (6 1/2)217 (8 5/8)PVM-9040ME

Features9040MENOTE: These icons indicate whichfeatures are available foreach model. 6041QMHigh Quality PicturePAL/SECAMHigh ResolutionThe PVM-9045QM incorporates a HR (HighResolution) Trinitron CRT which provides ahigh horizontal resolution of 450 TV lines.—— 3% underscanLess than 7 % (typical)Less than 7 % (typical)Central: 0.5 mm (typical)Corner: 0.6 mm (typical)2.0 % (typical)Stable Colour ReproductionBlack level stability is a very significant parameterin professional monitoring because of its importancein providing stable, accurate colour reproduction.PAL/SECAM/NTSC/NTSC4.4315 cm (6-inch) Trinitron tube,viewable area 12.7 cm (5-inch) measured diagonally,70° deflection, AG pitch 0.4 mmTo achieve this stability, all these monitors havea beam current feedback circuit. This stabilizes——the CRT drive by checking the cathode currentat low-light signal levels. This effectivelycorrects black level drift, giving stable colourreproduction over a long period of time andcompensating for changes in CRT characteristics.352.5 (14)30 (1 3/16)AC: 100 to 240 V, 0.7 to 0.4 AAC: 39 WAC: 100 to 240 V, 0.7 to 0.4 A, 50/60 Hz DC:12V. 3.2 AAC/DC: 40W (typical) Y/C InputLoop-through Mini DIN 4-pinY (luminance):In addition, the use of component signals1 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2C (chrominance): ensures that a high quality picture is available——PAL: 0.3 Vp-pfor±6picturedB, automaticevaluation.75 Ω termination* 2 ——60(2 3/8) 263 (10 3/8)Unit: mm (inches)Input FacilitiesComponent (Y/R-Y/B-Y or RGB) InputTo maximize operational convenience andversatility, a component (Y/R-Y/B-Y or RGB)input is included. This enables the directconnection of equipment such as a CameraControl Unit (CCU) or a Betacam ® VTR.——BNCRed/R-Y:Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 Ω—— Sync on Green/Green/Y:Composite: 1.0 Vp-p ±6 dB, sync negativeNon-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ΩBlue/B-Y:Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ΩConvenient Operational Features16:9/4:3 OperationThe picture aspect ratio can be switched between4:3 and 16:9, depending on the input signal.On the PVM-9045QM/9042QM, the “16:9”switch is provided on the front panel. On thePVM-6041QM*, aspect ratio is selected with theslide switch mounted on the rear panel.* 16:9 aspect images are available only in the underscanmode.—— ———— Loop-through Phono, -5 dBu, high impedance—— Loop-through BNC4.0 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2—— Mini DIN 8-pin—— 0.5 W, monauralUnderscan SwitchIn the Underscan mode, the picture size isreduced and the entire active picture isdisplayed on the screen. This facility allowspicture edges to be observed.H/V DelayWith the H/V delay mode, both the horizontaland the vertical blanking areas can be displayedsimultaneously for inspection of horizontal andvertical syncs.Manual Degauss SwitchManual degauss is available by pressing the“DEGAUSS” switch on the front panel.Blue Only ModeThe Blue Only mode monochrome display 88 (3 1/2)146 (5allows easy VTR noise inspection and chroma3/4)adjustment.PVM-6041QM173 (6 7/8)Approx. 5.5 kg (12 lb 2 oz)146 (W) x 173 (H) x 352.5 (D) mm (5 3/4 x 6 7/8 x 14 inches)AC power cordMini DIN 8-pin connector w/cable(cable length: 350 mm (13 7/8 inches)Operation instructions15 60( 19/32) (2 3/8)352.5 (14)30 (1 3/16)In addition to composite inputs, a Y/C input isalso provided so that luminance/chrominancevideo signals can be accepted. This minimizescross colour/dot interference and realises highquality video pictures.External SyncThese monitors can accept external sync signalfor synchronization with other equipment.The external sync can be set so that it willautomatically switch according to the inputselected.Wired Remote Control CapabilityMode selection of H/V delay, 16:9/4:3 aspectratio*, Underscan and External sync, togetherwith input selection, can be operated from acustom-made selector connected to the remoteinput with the supplied Mini DIN 8-pinconnector. Tally on/off can also be controlled.* PVM-9045QM/9042QM onlyAC/DC* OperationAs well as operating from an AC power source,these monitors can be also powered from a 12 VDC source for field operation. The use of anoptional DC-L10 Battery Adaptor allows the useof the same Lithium-ion batteries that powerSony camcorders. The monitors can also beoptionally operated from one or two internalNP-1B Battery Packs internally or an externalBP-90A Battery Pack with a DC-210 BatteryAdaptor.263 (10 3/8)Unit: mm (inches)0 dBu = 0.775 V rms* 1 The Y/C input has priorityover the Composite input.* 2 75 Ω termination isautomatically set to OFFwhen a connection is madeto the OUT connector.* The monitors are not equipped with battery chargers. Tocharge batteries, an appropriate battery charger for eachbattery type must be used.Bias/Gain ControlBias and Gain controls are provided on the frontpanel. Fine adjustment of white balance can beeasily made from the front of the monitor whileobserving the screen.

FeaturesAdditional FeaturesEIA Standard Rack MountableUp to two 9-inch monitors* or threePVM-6041QM models* can be mounted side byside into an EIA standard rack with the optionalMB-507 rack mounting bracket. Any emptyspaces can be covered with optional blankpanels.* ExclusiveHigh DurabilityThe heavy-duty construction of these monitorscopes with operation even under adverseconditions, with the metal cabinet minimizingelectromagnetic interference between adjacentmonitors. Whatever the application andsituation, these rugged monitors can be alwaysbe relied on to provide a stable picture display.Worldwide TV StandardsOperation is fully compatible with the threemajor TV standards; PAL, SECAM and NTSC.NTSC4.43 can also be reproduced.Carrying HandleWith their carrying handles, these monitors canbe carried to any location.Audio Monitoring FacilityA speaker (0.5 W, monaural) is built into themonitor for sound monitoring.Monitor ENG KitThe optional ENG kit* contains a monitor hoodand cord reel for operational convenience in thefield.* VF-505 for the PVM-9045QM/9042QM and VF-504 forthe PVM-6041QMControl PanelPVM-9045QM/PVM-9042QMPVM-9040MEPVM-6041QM

Optional AccessoriesMonitor ENG Kit (Monitor hood andcord reel) for PVM-6041QMVF-504Monitor ENG Kit (Monitor hood andcord reel) for PVM-9045QM/9042QMVF-505Rack Mounting BracketMB-507Blank Panel for PVM-6041QMMB-508Blank Panel for PVM-9045QM/9042QM/9040MEMB-509Car Battery CordDCC-XLR4Rechargeable Lithium-ion Battery PackBP-L90ARechargeable Lithium-ion Battery PackBP-L60ARechargeable Battery PackNP-1BRechargeable Battery PackBP-90ABattery Case for BP-90ADC-210Battery Charger for four BP-L60A orfour BP-L60ABC-L100CEBattery Charger for four NP-1BBC-1WDCEBattery Charger for four NP-1B andfour BP-90ABC-410CETV Tuner UnitTU-1040EFeatures■ Attaches a rechargeableLithium-Ion Battery PackBP-L60A or BP-L90A toPVM-9045QM/9042QM/6041QM■ Retractable handle■ Easily detachable upper partof adaptor bracketBattery AdaptorDC-L10Specifications■ Operating time*BP-L60A Approx. 100 min. (typical)BP-L90A Approx. 160 min. (typical)* Actual operating times may vary.■ Dimensions: 315 (W) x 146 (H) x 100 (D) mm(12 1/2 x 5 3/4 x 4 inches)DC-L10with PVM-9045QM■ Mass: With attachment frames for 9-inch monitor: 2.35 kg (5 lb 19 oz)With attachment frames for 6-inch monitor: 2.15 kg (4 lb 28 oz)■ DC output: DC 12 V, Right angle XLR 4-pin connector (female)■ DC fuse: 5 AFeature Reference ChartPVM-9045QM PVM-9042QM PVM-9040ME PVM-6041QMColour systemPAL/SECAM/PAL/SECAM/PAL/SECAM/PAL/SECAMNTSC/NTSC4.43 NTSC/NTSC4.43 NTSC/NTSC4.43Resolution (TV lines) 450 250 250 250Composite video input 2 2 1 1Y/C input 1 1 1 NRGB/Conponent IN (3 BNC) Y Y N YAudio IN 3 3 1 2Ext. sync IN Y Y N YTally/Remote Y Y N YDC operation Y Y N YSwitchable aspect ratio (4:3/16:9) Y Y N YUnderscan Y Y N YH/V delay Y Y N YBlue only Y Y N YBias/Gain control Y Y N NMB-507 Rack mounting bracket Y Y Y YMB-508 Blank panel N N N YMB-509 Blank panel Y Y Y NVF-504 Monitor ENG kit N N N YVF-505 Monitor ENG kit Y Y N NDC-L10 Battery adaptor Y Y N Y

SpecificationsGENERAL9045QM9042QMColour systemPAL/SECAM/NTSC/NTSC4.43CRT type 22 cm (9-inch) HR Trinitron Tube, 22 cm (9-inch) Trinitron tube,viewable area 19.1 cm (8-inch) measured diagonally, viewable area 19.7 cm (8-inch) measured diagonally,70° deflection, AG pitch 0.25 mm 70° deflection, AG pitch 0.5 mmResolution Composite video: 450 TV lines at centre Composite video: 250 TV lines at centreFrequency response 6.0 MHz (-3 dB)Aperture correction -4.0 dB to 6.0 dB (at 3.0 MHz)SynchronizationAFC time constant 1.0 msNormal scan6 % overscanUnderscan3 % underscanH linearityLess than 5 % (typical)V linearityLess than 5 % (typical)ConvergenceCentral: 0.43 mm (typical)Corner: 0.53 mm (typical)Raster size stability H: 1.0 %, V: 1.5 %HV regulation3.0 % (cut off to high light)Colour temperature D 65Operating temperature 0 to 35° C (32 to 95° F)Storage temperature -10 to 40° C (14° F to 104° F)Humidity0 to 90 % (no condensation)Power requirements AC: 100 to 240 V, 0.7 to 0.4 A, 50/60 Hz DC: 12 V, 3.7 APower consumption AC: 43 W, DC: 40 WINPUTVIDEO INPUTLINE A/LINEComposite video* 1 Loop-througn BNC1 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2Y/C* 1Loop-through Mini DIN 4-pinY (luminance):1 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2C (chrominance):NTSC: 0.286 Vp-p ±6 dB, automatic 75 Ω termination* 2PAL: 0.3 Vp-p ±6 dB, automatic 75 Ω termination* 2LINE BComposite video Loop-througn BNC1 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2RGB/COMPONENT (Y, R-Y, B-Y) BNCRed/R-Y:Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ΩSync on Green/Green/Y:Composite: 1.0 Vp-p ±6 dB, sync negativeNon-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ΩBlue/B-Y:Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ΩAUDIO INPUTLINE A/LINELoop-through Phono, -5 dBu, high impedanceLINEBLoop-through Phono, -5 dBu, high impedanceRGB/COMPONENT (Y, R-Y, B-Y) Phono, -5 dBu, high impedanceExternal syncLoop-through BNC4.0 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2DCXLR 4-pinRemoteMini DIN 8-pin (with Tally)OUTPUTSpeaker outPHYSICAL CHARACTERISTICSMassDimensionsSUPPLIED ACCESSORIESREGULATION COMPLIANCE0.5 W, monauralApprox. 8.2 kg (18 lb) without batteriesApprox. 217 (W) x 217 (H) x 352.5 (D) mm (8 5/8 x 8 5/8 x 14 inches)AC power cordMini DIN 8-pin connector w/cable (cable length: 350 mm (13 7/8 inches))Tally number plated (12 pcs. (No.1 to 5, A, B, C, P, R, white x 2 pcs.))Operation instructionsEN 60 950 (TÜV), CE (EMC, LVD), C-Tick MarkRear Panel / Dimensions352.5 (14)30 (1 3/16)217 (8 5/8)217 (8 5/8)163 (6 1/2)217 (8 5/8)15 60( 19/32) (2 3/8)263 (10 3/8)Unit: mm (inches)PVM-9045QM/9042QM163 (6 1/2)217 (8 5/8)PVM-9040ME

9040ME6041QMPAL/SECAMPAL/SECAM/NTSC/NTSC4.4315 cm (6-inch) Trinitron tube,viewable area 12.7 cm (5-inch) measured diagonally,70° deflection, AG pitch 0.4 mm———— 3 % underscanLess than 7 % (typical)Less than 7 % (typical)Central: 0.5 mm (typical)Corner: 0.6 mm (typical)2.0 % (typical)AC: 100 to 240 V, 0.7 to 0.4 AAC: 39 WAC: 100 to 240 V, 0.7 to 0.4 A, 50/60 Hz DC: 12 V, 3.2 AAC/DC: 40 W (typical)Loop-through Mini DIN 4-pinY (luminance):1 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2C (chrominance): ——PAL: 0.3 Vp-p ±6 dB, automatic 75 Ω termination* 2—— ———— ——BNCRed/R-Y:Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 Ω—— Sync on Green/Green/Y:Composite: 1.0 Vp-p ±6 dB, sync negativeNon-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ΩBlue/B-Y:Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 Ω—— ———— Phono, -5 dBu, high impedance—— BNC4.0 Vp-p ±6 dB, sync negative, automatic 75 Ω termination* 2—— XLR 4-pin—— Mini DIN 8-pinApprox. 5.5 kg (12 lb 2 oz)146 (W) x 173 (H) x 352.5 (D) mm (5 3/4 x 6 7/8 x 14 inches)AC power cordMini DIN 8-pin connector w/cable(cable length: 350 mm (13 7/8 inches))Operation instructions0 dBu = 0.775 V rms* 1 The Y/C input has priorityover the Composite input.* 2 75 Ω termination isautomatically set to OFFwhen a connection is madeto the OUT connector.352.5 (14)30 (1 3/16)352.5 (14)30 (1 3/16)173 (6 7/8)60(2 3/8) Unit: mm (inches)263 (10 3/8)88 (3 1/2)146 (5 3/4)15 60( 19/32) (2 3/8)263 (10 3/8)PVM-6041QMUnit: mm (inches)

© 1998 Sony Corporation. All rights reserved.Reproduction in whole or in part without written permission is prohibited.Features and specifications are subject to change without notice.All non-metric weights and measures are approximate.Sony, Trinitron and Betacam are trademarks of Sony Corporation.All other trademarks are the property of their respective owners.Distributed byMK7202/1OHB(8/98)Printed in Japan©1998 Sony Corporation