Switch and NAT router in a single device - Phoenix Contact

More documents

Recommendations

Info

Switch functions, such as port mirroring, Link Layer DiscoveryProtocol (LLDP) or redundancy mechanisms, ensure the usual highlevel of performance for data communication on seven 100 Mbps portsin a LAN network, i.e., the internal machine network.The WAN port is used for NAT translation in the higher-level companynetwork, i.e., the WAN network.
Additional functions of the NAT switchThe following functions are also supported in addition to the NATfunction:• Choice of three router modeso 1:1 NAT routero IP masqueradingo Virtual routing• Filtering data traffic by isolating broadcast domains• Support of the following redundancy mechanismso Rapid Spanning Treeo Fast ring detectiono Media Redundancy Protocol (MRP) according to IEC 62439• Configuration via web-based management• Port mirroring• Topology detection with LLDP• IP address assignment via BootP, DHCP or statically• Support of MEM PLUG memory moduleThe FL NAT SMN 8TX offers users the option of implementing endcustomer-specificconfigurations with MEM PLUG modules fromPhoenix Contact's Factoryline product range by using them as a sortof configuration stick. FL NAT SMN 8TX NAT switches withpreconfigured memory modules can be started up as per the endcustomer's specifications.
Page 1: Switch and NAT router in a single d

Switch and NAT router in a single device - Phoenix Contact

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?