P310 Owners Manual - Merits Health Products

After a certain amount of time with no joystickmovement SHARK will automatically turn itself off.Sleep mode will not be entered while programming.Any button press (or joystick movement if Wakeupstyle has been set to 'Joystick or Button') will bringthe system out of sleep mode.SHARK may enter Sleep Mode while charging. This willnot affect charging of SHARKDriving SHARKMoving the joystick will cause the powerchair todrive in that direction. The amount of joystickmovement will determine the speed that thepowerchair will move in that direction.For safety reasons. joystick movements are ignored whenSHARK is first turned on (OONAPU). SHARK will slowly flashthe Information Gauge to indicate this.Simply release the joystick back to the neutral position and theerror will disappear.A user may adjust the top speed of their poweerchairto suit their preference or environment by turningthe speed control dial.Simply turn the dial fully clockwise to travel at topspeed when the joystick is pushed fully forward.The top speed progressively reduces as the dialis turned counter-clockwise.Operating your powerbase Wheelchair23