Linear Connectors - Dolomite Microfluidics

Linear Connectorsproduct datasheetpageDescription 3Main Benefits 3Specifications 4Cross-Sectional View 4Geometry 5

The Dolomite Centre LtdPart namePart numberLinear Connector 4-way 3000024Linear Connector 8-way 3000102Linear Connector 12-way 3000067Linear Connector Seal 4-way 3000021MAR-000026 Revision 1.5 Page 2 of 6

The Dolomite Centre LtdDescriptionThe Linear Connector 4-way allows fast and reliable connection between Dolomite chipsand 1.6mm O.D. tubing. The Linear Connector works with chips that are 4mm thick, andalso have a chip header in place. The connectors can also be used with other types ofheaders allowing connection on the top surface of a chip. This is shown in the diagramsbelow:Above and left:Linear connector with tubing andseal in place(Part No. 300010Right top:Linear Connector with TopInterface and microfluidic chipRight:Linear Connector Seal 4-wayMain Benefits• Compact• Low dead volume• Quick connect/disconnect• Wide temperature and pressure range• Low cost• Excellent chemical compatibilityMAR-000026 Revision 1.5 Page 3 of 6

The Dolomite Centre LtdSpecificationsSpecificationLinear Connector4 wayLinear Connector8-wayLinear Connector12-wayNumber of ports 4 8 12Chip thickness options4mmChip width options 15mm 30mm 45mmChip length optionsOutside diameter ofconnection tubingInside diameter ofconnection tubingConnection tubingmaterial10mm-90mm1.6mm(1/16inch)0.25mm, 0.5mm, 0.8mmPTFE (FEP, ECTFE, ETFE, PFA) or PEEKOperating pressure 30bar* 10bar* 5bar*Operating temperatureof connectorOperating temperatureof fluid in connectorWetted materialsConnector materialsDead volume*Based on tests at 21CPEEK, StainlessSteel 316-15 to 75ºC-15 to 150ºC **Glass, PTFE and perfluoroelastomerPEEK, StainlessSteel 316

The Dolomite Centre LtdGeometryLinear Connector 4-way (Part No. 3000024)Linear Connector 8-way (Part No. 3000102)MAR-000026 Revision 1.5 Page 5 of 6

The Dolomite Centre LtdMAR-000026 Revision 1.5 Page 6 of 6