Cabling accessories - Bizline

Cabling accessoriesDrum rollers, pull wires and cable rodsCABLE GRIPSApplications:Accessory for pulling cables through ducts and conduits.How to use:1. Compress the cable grip and slide the cable inside.2. Attach the cable grip to a pull wire and pull it.3. Compress the cable grip to release the cable.■ Set of four cable grips, one simple loop, aluminium sleeve.1 cable grip for 6 - 12 mm dia. cables, 300 kg breaking load.1 cable grip for 13 - 19 mm dia. cables, 400 kg breaking load.1 cable grip for 20 - 26 mm dia. cables, 400 kg breaking load.1 cable grip for 27 - 32 mm dia. cables, 400 kg breaking load.Reference BIZ 700 217■ Set of four nylon cable grips, one single loop, aluminium sleeve1 cable grip for 6 - 10 mm dia. cables, 100 kg breaking load.1 cable grip for 13 - 19 mm dia. cables, 150 kg breaking load.1 cable grip for 20 - 26 mm dia. cables, 150 kg breaking strain.1 cable grip for 27 - 32 mm dia. cables, 150 kg breaking load.Reference BIZ 700 218ICTA CONDUIT PULLERApplications:The Bizline conduit puller is the only simple, quick and efficientsolution for pulling all conduits through the following:- hollow / plasterboard / cellular walls- lining panels- construction voids- false ceilings, etc.Contains 3 conduit pullers (16/20/25 mm).Instructions:The combination of “conduit puller” and “pulling ring”ensures the efficient pulling of conduits.BIZ LUB'Applications:For the trouble-free pulling of wires and cables inconduits, trunking and electrical ducts.Specifications:Operating temperature: -5°C to +82°C (freezes at -5°C).Storage temperature: +4°C to +40°C.Viscosity: 3400 ± 200 cps.Density: 1.010 ± 0.01 g/ml. Dry residue 12%.Net volume: 1 litre.How to use:Leave to dry before switching on power.Lifetime: 5 years.BENEFITS• Non-inflammable, non-corrosive,non-toxic.• For use with high and low-currentcables.• High lubricating capability.• Ph neutral (6.5 ± 0.5).BENEFITS• Simple: it locks by pulling againstthe inside of the conduit. Insert itinto the duct and pull on the cableto lock it. Simply pushing in theopposite direction allows it to beremoved.• Effective: Its rounded shape fitsthe size of the conduit exactly (noexcess thickness) and avoidsobstacles within partitions.Resistance to traction between20 and 45 kg depending on themodel.• Quick: Five seconds is all it takesto fit or remove it. No need tomake intermediate holes to locateyour conduits inside the walls.No need to make holes inconduits. Compatible with allbrands of ICTA conduit on themarket.Reference BIZ 700 231Reference BIZ 700 18126Find all our products at www.bizline.pro