Hand tools - Bizline

Hand tools1000Vinsulated tools p. 90Pliers,cable strippersand cutters p. 92Crimping tools p. 98Non-insulatedspannersand screwdrivers p. 100Cutting, sawingand filing tools p. 105Hand toolsMeasuringand marking tools p. 109Hammersand chisels p. 116Soldering irons p. 117Electricalinspectionand testing devices p. 119Tool storage p. 12187

Hand tools1000V insulated toolsA range of tools that guarantees your safety!1. Reminder on the use of 1000V insulated tools.- Before starting any work on live circuit, ensure that you have the correct individual protective equipment, conforming to relevant standards:insulating gloves and protective visor.- Check the marking on tools.- Store insulated tools separately to avoid any mechanical damage.- Check each tool visually before use. Change the tool if it is damaged, cut or worn.2. Tools complying with IEC 60900: 2004:Each tool is individually tested as follows:a - Impact test:After the tool has been submittedat a temperature of -25°C during2 hours, the impact tests arecarried out on 3 points of theinsulating material.No signs of cracking or tearingmust be visible.b - Dielectric test:After immersion in a water tank for24 hours and then drying, 10kV areapplied for 3 minutes between thesteel and the insulated points. Noarking, no flashover or breakdownshall occur during the test.d - Insulation adhesiontest:After 168 hr in an enclosure at70°C, a force is applied for3 minutes to check the adhesion ofthe insulation to the steel. Noloose or tearing must be visible.e - Non-propagationflame test:The tool is submitted to flame for10 sec. Its propagation is observedfor 20 sec. and must not exceed a120 mm height.c - Penetration test:Test carried out on the mostvulnerable part of the tool after2 hours in an enclosure at 70°C. A5 kV live circuit is then applied for3 min. No perforation, ignition orbypassing should be seen.f - Individual productiontest:Each tool is visually checked andsubmitted to a 10 kV live circuit for10 sec.3. Marking complying with IEC 60900: 2004:- Product reference: e.g. BIZ 700 487- Production date: e.g. 09 (for 2009)- Symbol IEC 60900: 2004- Double triangle with 1000V indication, certifying the product compliance with IEC 60 900.88Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross reference1000V insulated toolsHand tools1000V insulated pliersSpecifications:Industrial finish (except end cutters, polished finish).Dual material polypropylene / elastomer handles.Polypropylene insulation.Hardness of the handles > HRC 44; hardness of cutting parts HRC 56 to 65.Handles open to 50 mm ± 5 mm.Adjustable stripping pliersBIZ 700 023Universal pliersBIZ 700 024BIZ 700 025Waterpump pliersBIZ 700 029Half- round long nose pliersBIZ 700 027BIZ 700 511Hand toolsHalf-round bent long nose pliersBIZ 700 028BIZ 700 512“Fatigue-free” cutting pliersBIZ 700 026Heavy-duty cutting pliersBIZ 700 030BIZ 700 514Cutting nippersBIZ 700 513Reference Description Length Weight Max. resistance For wire(mm) (g) against pulled wire with a max diam.(Mpa)(mm)BIZ 700 023 Adjustable stripping pliers 160 170 6BIZ 700 024 Universal pliers 160 210 1,6BIZ 700 025 Universal pliers 200 340 1,6BIZ 700 029 Waterpump pliers 250 410BIZ 700 027 Half-round nose pliers 160 150 1600 1,6BIZ 700 511 Half-round nose pliers 200 247 1600 1,6BIZ 700 028 Half-round bent long-nose pliers 160 150 1600 1,6BIZ 700 512 Half-round bent long-nose pliers 200 242 1600 1,6BIZ 700 026 “Fatigue-free” cutting pliers (20% less effort) 160 220 2200 1,6BIZ 700 030 Reinforced cutting pliers 160 210 2200 1.8 (and 1.6 mm piano wire)BIZ 700 514 Reinforced cutting pliers 200 367 2100 2,0BIZ 700 513 Cutting nippers 160 317 2200 1,689

Hand tools1000V insulated tools1000V INSULATED SCREWDRIVERSSpecifications:Chrome vanadium fully polished blades.Dual material polypropylene / elastomer handles.Polypropylene insulation.1000V INSULATED SCREWDRIVER BITHOLDER AND 11 BITSBENEFIT• Ergonomic handle for betteruse and improved torque(e.g. 8% more torque inkgf.cm with BIZ 700 018).BENEFIT• Ergonomic handle forbetter use.Reference Description Weight (g)BIZ 700 014 Slotted 2,5 x 75 21BIZ 700 015 Slotted 3 x 100 24BIZ 700 485 Slotted 3,5 X 100BIZ 700 016 Slotted 4 x 100 60BIZ 700 017 Slotted 5,5 x 125 79BIZ 700 018 Slotted 6,5 x 150 116BIZ 700 509 Slotted 8 x 175 171BIZ 700 504 PH 0 - 3 x 60 21BIZ 700 021 PH 1 - 4,5 x 80 61BIZ 700 022 PH 2 - 6 x 100 95BIZ 700 508 PH 3 - 8 x 150 160BIZ 700 500 PZ 0 - 3 x 60 21BIZ 700 019 PZ 1 - 4,5 x 80 61BIZ 700 020 PZ 2 - 6 x 100 95BIZ 700 510 PZ 3 - 8 x 150 160BIZ 700 466 TORX 15 x 100BIZ 700 467 TORX 20 x 125Supplied in a storage box containing:- 4 slotted bits (3 / 4 / 5.5 / 7).- 3 PH bits (PH0 / PH1 / PH2).- 2 PZ bits (PZ1 / PZ2).- 2 Torx bits (T15 / T20).Specifications:Chrome vanadium molybdenum steel blade with polypropylene insulation.Chrome vanadium steel bit.Screwdriver length: 204 mm.Blade length: 105 mm.Magnetic bit holder 1/4" hex. (6.35 mm).Box weight 218 g.Weight of screwdriver 103 g.ReferenceBIZ 700 490Description1000V insulated screwdriver bit holder and 11 bits1000V COMBINATION HEADINSULATED SCREWDRIVERFOR MODULAR EQUIPMENTApplications:The solution for mixed head screws on electrical equipment (contactors,residual current switches, isolators, relays, circuit breakers, enclosures).Specifications:Dual-material handle.Blade in high-quality alloy steel for extra hard wear.BENEFITS• Optimum grip of the screw due to the combination headreducing wear on the screw and ensuring better torque.• Ergonomic handle for better grip.• Identification facilitated by the head being marked at the top ofthe handle.ReferenceDescription$ BIZ 700 486 1000V combination head screwdriver PZ 1 / Slotted 1 x 75$ BIZ 700 487 1000V combination head screwdriver PZ 2 / Slotted 2 x 10090Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross reference1000V insulated toolsHand toolsKIT OF FOUR 1000V INSULATEDSCREWDRIVERS AND 3 PLIERSKit contains:- 1 slotted screwdriver 3 X 100 (BIZ 700 015).- 1 slotted screwdriver 4 X 100 (BIZ 700 016).- 1 PZ screwdriver 1 X 80 (BIZ 700 019).- 1 PZ screwdriver 2 X 100 (BIZ 700 020).- 1 adjustable stripping pliers 160 mm (BIZ 700 023).- 1 universal pliers 160 mm (BIZ 700 024).- 1 “fatigue-free” cutting pliers 160 mm (BIZ 700 026).KIT OF 7 1000V INSULATEDSCREWDRIVERS AND TESTERKit contains:- 1 slotted screwdriver 2.5 X 75 (BIZ 700 014).- 1 slotted screwdriver 3 X 100 (BIZ 700 015).- 1 slotted screwdriver 4 X 100 (BIZ 700 016).- 1 slotted screwdriver 5.5 X 125 (BIZ 700 017).- 1 slotted screwdriver 6.5 X 150 (BIZ 700 018).- 1 PZ screwdriver 1 X 80 (BIZ 700 019).- 1 PZ screwdriver 2 X 100 (BIZ 700 020).- 1 maintester 220-250V, 140 mm.ReferenceBIZ 700 094DescriptionKit of 4 1000V insulated screwdrivers and 3 pliersReferenceBIZ 700 093DescriptionKit of 7 1000V insulated screwdrivers and maintesterHand toolsSET OF FOUR TORX SCREWDRIVERSKit contains:- 1 TORX 10 X 125 screwdriver.- 1 TORX 15 X 125 screwdriver.- 1 TORX 20 X 125 screwdriver.- 1 TORX 25 X 125 screwdriver.ReferenceDescription$ BIZ 700 523 Kit of 4 1000V torx screwdriversKIT OF 3 1000V INSULATED 160 MMPLIERSKit contains:- 1 adjustable stripping pliers 160 mm (BIZ 700 023).- 1 universal pliers 160 mm (BIZ 700 024).- 1 “fatigue-free” cutting pliers 160 mm (BIZ 700 026).KIT OF 3 1000V INSULATED 200 MMPLIERSKit contains:- 1 half-round long nose pliers200 mm (BIZ 700 511).- 1 half-round bent long nosepliers 200 mm (BIZ 700512).- 1 heavy-duty cutting pliers200 mm (BIZ 700 514).ReferenceBIZ 700 092DescriptionKit of 3 1000V insulated pliers, 160 mmReferenceBIZ 700 515DescriptionKit of 3 1000V insulated pliers, 200 mm91

Hand toolsPliers, cable strippers and cuttersNON-INSULATED PLIERSSpecifications:Dual-material handles in polypropylene and elastomer.Handle hardness > HRC 44.Jaw hardness HRC 56 to 65.Handles open to 50 mm ± 5 mm.BIZ 700 522Reference Description Length Weight Max. resistance to For wire of max. Finish(mm) (g) traction of wire (Mpa) diam. (mm)$ BIZ 700 522 Stripping pliers 160 140 4,5 Industrial$ BIZ 700 526 Cutting pliers 160 188 2200 1,6 Industrial$ BIZ 700 527 Half-round long nose pliers 200 247 1600 1,6 Polished$ BIZ 700 528 Half-round bent long nose pliers 200 247 1600 1,6 Polished$ BIZ 700 530 Heavy-duty cutting pliers 200 367 2100 2,0 PolishedMETAL PLUG INSERTION TOOLApplications:Tool for inserting metal plugs in hollow materials, M4, M5, M6 and M8.Ability to expand screw, ring-bolt, hook and hinge plugs.Specifications:Stroke 20 mm.Support area 20 x 20 mm.Weight: 365 g.BENEFIT• Easy to use incorners.Reference BIZ 700 297WATER PUMP PLIERChrome vanadium steel plier for diameters up to 1 1 / 4 ”.Adjustable with seven positions Duramant finish.Specifications:Length: 240 mm.Thickness: 7 mm.Weight: 200 g.SELF-ADJUSTING PUMP PLIERSelf-adjusting pump plier in chrome vanadium steel for diameters upto 42 mm (1 5 / 8 ").Ergonomic handle design with non-slip plastic grip. BENEFITSDouble-hardened jaws. Duramant finish.Specifications:Length: 250 mm.Weight: 400 g.• Automaticadjustment.• Plier locks bysimply applyingpressure.Reference BIZ 400 007 Reference BIZ 400 00892Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross referencePliers, cable strippers and cuttersHand toolsPLIERS FOR ELECTRONICSSpecifications:Dual-material handles in soft polypropylene and elastomer.High-strength pliers in polished chrome-nickel plated carbon steel.Quality of the jaws checked on 0.08 mm thickness paper.Anti-rust treated at 100% R.H. for 48 hours.Weight: 112 g.End cuttersBIZ 700 300Diagonal cuttersBIZ 700 301Long-nose plierBIZ 700 302Reference Description Length Length of jaws For wire of max. Max. resistance Blade hardness(mm) (mm) diam. (mm) to a pulled wire (Mpa) (HRC)BIZ 700 300 Cutting nippers 110 14.5 1.2 126 58-62BIZ 700 301 Diagonal cutters 115 15 0.91 84 55-62BIZ 700 302 Long-nose pliers 130 33 0.91 84 55-62Hand toolsELECTRONICS TOOL BOXSet contains:8 electronics screwdrivers:- 1 slotted screwdriver, 1.2 mm.- 1 slotted screwdriver, 1.5 mm.- 1 slotted screwdriver, 2.0 mm.- 1 slotted screwdriver, 2.5 mm.- 1 slotted screwdriver, 3.0 mm.- 1 PH screwdriver, 000.- 1 PH screwdriver, 00.- 1 PH screwdriver, 0.3 electronics pliers:- 1 electronics plier BIZ 700 300.- 1 electronics plier BIZ 700301.- 1 electronics plier BIZ 700 302.Specifications:Electronics screwdrivers blades in satin chrome steel withpolished tip.Handles in polypropylene and elastomer.Dimensions of slotted screwdrivers: total length of 152 mm± 2 mm, blade length 60 mm ± 1.5 mm.Dimensions of PH screwdrivers: total length of 153 mm± 2 mm, blade length 60 mm ± 1.5 mm.CABLE TIE PLIERSApplications:For installation and cable ties from 3.6 to 9,5 mm wide and 1.3 to 2.3 mmthick.Specifications:Spring lifetime 60,000 cycles.Body in carbon steel.Thickness: 1.5 mm.Length: 190 mm.Weight: 260 g.Reference BIZ 700 010SELF GRIPPING WRENCHWheel adjustment.Return spring on unlocking lever.Specifications:Jaws in forged steel.Opening 85 mm.Length: 250 mm.Weight: 800 g.Reference BIZ 700 516Reference $ BIZ 700 59993

Hand toolsPliers, cable strippers and cuttersAUTOMATIC STRIPPING PLIERS■ Automatic stripping pliers, 0.2 to 6 mm 2Adjustable stripping pliers 5 to 12 mm (detachable if necessary).Includes wire cutter (2 mm 2 max.)Applications :To cut and strip round, flat and semi-flat wires and cables.BENEFIT• Pistol grip for comfortablerepetitive work.END AUTOMATIC STRIPPING PLIERSCAPACITY 0.08 TO 2.5 MM 2Applications :To cut and strip round, flat and semi-flat wires and cables.Capacity 0.08 to 2.5 mm 2 .Specifications:Dimensions: 130 x 104 x 17 mm.Weight: 156 g.Carbon steel and high density polymer structure.BENEFIT• Pistol grip for comfortableexpeditive work.Reference $ BIZ 700 586■ Spare jaw for BIZ 700 586Reference BIZ 700 600Reference BIZ 700 071■ Automatic stripping pliersApplications :Strips wires of0.2 / 0.5 / 0.75 / 1 / 1.5 / 2.5 / 4 / 6 mm 2 .■ Spare jaw for BIZ 700 071Reference BIZ 700 209Specifications:Zinc alloy jaws with plastic handle.Carton steel blade.STRAIGHTTWEEZERSSpecifications:Stainless, steel.Reference BIZ 700 043Reference $ BIZ 700 58594Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross referencePliers, cable strippers and cuttersHand toolsMULTI-PURPOSE UNSHEATING PLIERSApplications :Cable unsheater diam. 8 to 13 mm (2 G1,5 to 5G2,5mm 2 ).Wire stripper 0.5 to 6 mm 2 .Cable cutter, max. 6 mm 2 .WIRE STRIPPER, 0.5 - 4 MMApplications :For wires of diam. 0.5 to 4 mm.Specifications:Carbon steel jaws.PVC handle.Weight: 72 g.Length: 127 mm.Reference BIZ 700 186Reference $ BIZ 700 277ADJUSTABLE CABLE STRIPPERSpecifications:ABS handle and steel blade.CABLE STRIPPERApplications :To strip round cables of diam. 4 to 28 mm.Hand toolsSpecifications:Length: 180 mm.Weight: 80 g.Reference For cable diam. Length Weight(mm) (mm) (g)BIZ 700 003 4,5 to 25 152 160BIZ 700 004 25 to 36 167 165BENEFITS• Ergonomic dual materialhandle for comfortable work.• Red cable support made frompatented no-scratch plastic.SPARE BLADEFOR 700 003 AND BIZ 700 004Specifications:Hardness HRC 45-52 hardness.Diam.: 2 mm.Length: 25.2 mm.Up to 2000 cuts.Reference BIZ 700 085Reference BIZ 700 052SPARE BLADE FORCABLE STRIPPER BIZ 700 052Specifications:Length: 80 mm.Diam.: 1 mm.Reference BIZ 700 19095

Hand toolsPliers, cable strippers and cuttersApplications :Cuts light cables and cords up to a max. of 4 mm diam.And spring steel up to 1.5 mm max. diam.Cuts stainless steel. Test first.Blades in SK5 steel alloy with a hardness ofHRC 58-60 for a clean cut in cords leaving no burr.Specifications:Length: 190 mm.Weight: 300 g.Applications :For aluminium and copper cable up to 16 mm 2 ,solid, stranded or flexible.Specifications:Carbon steel jaws.Jaw hardness HRC 42 to 48.PVC handle.Length: 162 mm.Weight: 175 g.Reference BIZ 700 303Reference $ BIZ 700 278HEAVY – DUTY CABLE CUTTERApplications :For copper cables max. diam. of 21 mm and 16 mm 2 rigid,35 mm 2 multi-strand and 70 mm 2 flexible.For aluminium cables max. diam. of 21 mmand 70 mm 2 multi-strand.Specifications:Weight: 430 g.CABLE CUTTERApplications :For copper cables diam. of 10 mm and 16 mm 2 rigid, 25 mm 2multi-strand and 25 mm 2 flexible.For aluminium cables max. diam. of 10 mmand 25 mm 2 multi-strand.Specifications:Weight: 173 g.Reference BIZ 700 001 Reference BIZ 700 20196Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross ReferencePliers, cable strippers and cuttersHand toolsRATCHET CABLECUTTER, 150 MM 2Applications:For cables max diam. 30 mm.For copper cable max.:150 mm 2 .For aluminium cable max. : 240 mm 2 .Specifications:Length: 254 mm.Weight: 770 g.BENEFIT• Safety stops onhandles.Reference BIZ 700 011RATCHET CABLECUTTER, 300 MM 2Applications:For cables max. diam. 53 mm.For copper cable max :300 mm 2 .For aluminium cable max: 400 mm 2 .Specifications:Length: 335 mm.Weight: 1050 g.BENEFITS• Safety stops onhandles.• Reduced averagecutting effort of20% (15 kginstead of 19 kg).• Reinforced 3-toothratchet.Reference BIZ 700 202PVC PIPE CUTTERApplications:For cutting conduits suitable for PVC rigid orflexible conduit pipes and similar materials(PP,PE and PB).Max. cutting capacity 42 mm (tubes andconduits) and 40 x 12.5 (mini truncking).Specifications:Reinforced structure with2 material handle.Stainless steel blade.Safety clips in closedposition.Weight: 395 g.Reference BIZ 700 067■ Spare bladefor BIZ 700 067Reference BIZ 700 189Hand toolsCRIMPING PLIERSFOR COPPER POWERTERMINALS ANDSLEEVESHexagonal crimping. Complies withNFC 20-130 (LCIE test report available onrequest).Not suitable for crimping aluminium parts.Crimping toolsSET OF TWO SPARE DIESSpecifications:Steel alloy die.Chrome finish.Specifications:Carbon steel chrome jaw.PVC handle.■ Crimping tool for copper powerterminals and sleeves from6 to 50 mm 2■ Crimping tool for copper powerterminals and sleeves from6 to 120 mm 2Applications:For copper power terminals and sleeves6, 10, 16, 25, 35 and 50 mm 2 .Specifications:Length: 520 mm.Weight: 2 kg.Applications:For copper power terminals and sleeves6, 10, 16, 25, 35, 50, 70, 95 et 120 mm 2 .Specifications:Length: 660 mm.Weight: 3.5 kg.Reference BIZ 700 012 Reference BIZ 700 013■ Set of two spare diesReference Description HRC Weight (g):BIZ 700 273 For crimping tool 42-45 40BIZ 700 012BIZ 700 274 For crimping tool 38-42 95BIZ 700 01397

Hand toolsCrimping toolsCRIMPING PLIERSSpecifications:Dual material handles in polypropylene andelastomer.Length: 229 mm.Weight: 570 g.Instructions:To crimp pre-insulated terminals and cable ends,place the wire next to the colour identificationon the die.The dies are not sold separately.ReferenceDescriptionBIZ 700 005 Crimping pliers for pre-insulated terminals 0.5 to 6 mm 2BIZ 700 007 Crimping pliers for pre-insulated terminals 0.5 to 6 mm 2BIZ 700 006 Crimping pliers for cable ends 0.5 to 4 mm 2BIZ 700 009 Crimping pliers for cable ends 6 to 16 mm 2BIZ 700 008 Crimping pliers for high voltage copper terminals lugs 1.5 to 10 mm 2CRIMPING PLIERS FORRJ45 CONNECTORSPliers with ratchet.Includes cable cutting and stripping functions.Applications:For crimping 4, 6 and 8-contact modular connectors,RJ45, RJ11 and RJ12.Specifications:Carbon steel dies.Die hardness 42-48 HRC.Dual material handles.Polished finish.Length: 210 mm.Weight: 510 g.10-IN-1 MULTI-PURPOSE PLIERSThe following functions are combined in a single tool:- Thightening- Stripping from 0.8 mm 2 to 2.6 mm 2 .- Twisting wires up to diam. 3 mm.- Cutting flexible copper and aluminium wires.- Cutting rigid steel wires of diam. 3 mm.- Bold cutter M3 to M5.- Crimping of insulated and cable ends 0.5 to 6 mm 2 .Specifications:Weight: 200 g.ReferenceDescription$ BIZ 700 587 Crimping pliers for RJ45 connectorsReferenceBIZ 700 002Description10-in-1 Multi - Purpose Pliers98Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross ReferenceCrimping toolsHand toolsADAPTABLE CRIMPING PLIERS■ Empty adaptable crimping pliers for use with interchangeable dies.Crimping in compliance with standards EN 60352-2, EN 60999-1 and UL 486A.Tested over 2000 crimping cycles.Reference BIZ 700 260BENEFITS• Parallel crimping with approx. 1,000 kg (10,000 N) ofcontact pressure.• A single tool for 90% of connectors.• Release system for quick and easy replacement ofdies without special tool.• Upper and lower dies attached, so they cannot be lost.• Compact tool, easy to carry.■ Crimping interchangeable diesSpecifications:High resistance phosphate finish steelcrimping dies.(HRC 35 – 55 / HV 450 – 515).Hand toolsBIZ 700 261 BIZ 700 264 BIZ 700 265 BIZ 700 266 BIZ 700 267Reference Applications: Conductor size crimping rangeBIZ 700 261 Die for insulated and non-insulated cable ends 0.25 to 10 mm 2BIZ 700 262 Die for insulated and non-insulated cable ends 16 to 25 mm 2BIZ 700 263 Die for Pre-insulated terminals (lugs, clips, crimps) 0.5 to 2.5 mm 2BIZ 700 264 Die for Pre-insulated terminals (lugs, clips, crimps) 0.1 to 0.4 / 4 to 6 mm 2BIZ 700 265 Die for high voltage copper terminals lugs 4 to 10 mm 2BIZ 700 266 Die for receptacles 0.5 to 6 mm 2BIZ 700 267 Die for computer connectors RJ45 8/8BIZ 700 268 Die for coaxial computer connectors RJ11 6/6, 6/4, 6/2BIZ 700 269 Die for coaxial computer connectors CATV RJ6 / RJ59BIZ 700 270 Die for coaxial computer connectors BNC RJ58 / RJ59 / RJ62 / RJ71DIE AND CRIMPINGTOOL KITFOR 0.25 TO 10 MM 2CABLE ENDSKit contains:- 1 adjustable crimping pliersBIZ 700 260 for interchangeabledies.- 1 die for cable ends from 0.25 to10 mm 2 (BIZ 700 261).STORAGE BOX FOR ADAPTABLECRIMPING PLIERBox with double foam inside.Storage for crimping pliers and 10 dies.Reference BIZ 700 271Reference BIZ 700 27299

Hand toolsNon-insulated spanners and screwdriversOPEN-ENDED SPANNERSSpecifications:Chrome Vanadium steel.Polished finish.COMBINATION SPANNERSSpecifications:Chrome Vanadium.Satin titanium finish.HRC 39 minimum. DIN 3113.Reference Description Dimensions (mm): Length (mm)$ BIZ 700 588 Open end spanner 6 x 7 108$ BIZ 700 589 Open end spanner 8 x 9 121$ BIZ 700 590 Open end spanner 10 x 11 134$ BIZ 700 591 Open end spanner 12 x 13 151$ BIZ 700 592 Open end spanner 14 x 15 166$ BIZ 700 593 Open end spanner 16 x 17 184$ BIZ 700 594 Open end spanner 18 x 19 201$ BIZ 700 595 Open end spanner 20 x 22 216$ BIZ 700 596 Open end spanner 21 x 23 234$ BIZ 700 597 Open end spanner 24 x 26 253Reference Description Dimension (mm)BIZ 700 470 Combination spanners 6BIZ 700 160 Combination spanners 7BIZ 700 161 Combination spanners 8BIZ 700 162 Combination spanners 9BIZ 700 163 Combination spanners 10BIZ 700 164 Combination spanners 11BIZ 700 165 Combination spanners 12BIZ 700 166 Combination spanners 13BIZ 700 471 Combination spanners 14BIZ 700 472 Combination spanners 15BIZ 700 167 Combination spanners 16BIZ 700 168 Combination spanners 17BIZ 700 169 Combination spanners 18BIZ 700 170 Combination spanners 19BIZ 700 473 Combination spanners 20BIZ 700 474 Combination spanners 21BIZ 700 475 Combination spanners 22BIZ 700 476 Combination spanners 23BIZ 700 477 Combination spanners 24BIZ 700 478 Combination spanners 25BIZ 700 479 Combination spanners 26SET OF 10 OPEN-ENDED SPANNERSSpanner dimensions: 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 15 / 16 x 17 /18 x 19 / 20 x 22 / 21 x 23 / 24 x 26.Specifications:Chrome Vanadium open- ended spanners. Satin chrome finish.SET OF 8 COMBINATION WRENCHESDimensions: 8 / 9 / 10 / 12 / 13 / 14 / 17 / 19 mm.Specifications:Anti-rust treated withmatt satin finish.Weight withholder 625 g.Reference BIZ 700 176Reference BIZ 700 041100Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross referenceNon-insulated spanners and screwdriversHand toolsSOCKET WRENCHESSpecifications:6 x 12 points.Chrome Vanadium. Polished chrome finish.HRC 39 minimum. DIN 475.2/899.SET OF SOCKET WRENCHESDimensions :6 / 7 / 8 / 10 / 13 / 17.Specifications:Chrome Vanadium steel.Reference Désignation Dimensions (mm)BIZ 700 116 Socket wrench 6BIZ 700 117 Socket wrench 7BIZ 700 118 Socket wrench 8BIZ 700 119 Socket wrench 9BIZ 700 120 Socket wrench 10BIZ 700 121 Socket wrench 11BIZ 700 122 Socket wrench 12BIZ 700 123 Socket wrench 13BIZ 700 124 Socket wrench 14BIZ 700 125 Socket wrench 15BIZ 700 126 Socket wrench 16BIZ 700 127 Socket wrench 17BIZ 700 128 Socket wrench 18BIZ 700 129 Socket wrench 19BIZ 700 304 Socket wrench 20BIZ 700 305 Socket wrench 21BIZ 700 306 Socket wrench 22BIZ 700 307 Socket wrench 23BIZ 700 308 Socket wrench 24BIZ 700 309 Socket wrench 25BIZ 700 310 Socket wrench 267-PIECE COMBINATION SPANNER SETSupplied in a plastic storage case.Dimensions: 8 / 10 / 12 / 13 / 14 / 17 / 19.Specifications:Chrome Vanadium.Polished spanners 72-teeth.DIN 3113.Weight: 11.25 g.Reference BIZ 700 06637-PIECE SOCKET SETSet contains:- 12 x 1/4" drive sockets, (4 / 4,5 / 5 / 5,5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13).- 7 x 1/4" drive Torx bits 1/4" (T8 / T10 / T15 / T20 / T25 / T30 / T40).- 4 six-point sockets (3 / 4 / 5 / 6).- 3 Pozidriv bits (1 / 2 / 3).- 3 Flat bits (3 / 4 / 5.5 / 7).- 3 Phillips bits (1 / 2 / 3).- 1 x 1/4 " drive reversible ratchet wrench.- 1 x 1/4 " drive universal joint.- 1 x 1/4 " drive spinner handle.- 1 x 1/4 " drive 150 mm extension.- 1 x 1/4 " bit adapter.Specifications:Chrome vanadiumsatin steel finish.Packed weight 860 g.Hand toolsReference BIZ 700 191Reference BIZ 700 078101

Hand toolsNon-insulated spanners and screwdriversGO-THROUGH SOCKET SETSet contains:- 13 x 1/4" drive sockets ( 4 / 4,5 / 5 / 5,5 / 6 / 7 / 8 / 9 /10 / 11 / 12 / 13 / 14 mm).- 6 Torx bits (T10 / T15 / T20 / T25 / T30 / T40).- 4 Flat bits (3 / 4 / 5 / 6).- 3 Phillips bits (1 / 2 / 3).- 3 Pozidriv bits (1 / 2 / 3).- 4 six-point sockets (3 / 4 / 5 / 6).- 1 x 1/4" drive 75 mm extension.- 1 hollow ratchet wrench.- 1 x 1/4" bit adaptater.- 1 x 1/4" drive spinner handle.- 1 x 1/4" bit driver.Specifications:Chrome vanadium satin steel finish.Reference BIZ 700 203ADJUSTABLE WRENCHESTighten / Loosenmore easily■ 30 cm Adjustable wrenchApplications:Also suitable for plumbers.Specifications:Burnished thumb wheel and head.Jaw opening 38.5 mm.Weight: 770 g.Reference BIZ 700 059■ Adjustable ratchet wrenchApplications:Tighten and loosen a square head nut or screwup to 32 mm.Specifications:Chrome alloy steel. Dual material handles inpolypropylene and elastomer.Length: 250 mm.■ 15 cm Adjustable wrenchSpecifications:Burnished thumb wheel and head.Jaw opening 26 mm.Weight: 155 g.BENEFITS• Time savings.• Grip and shape makes it easy to use.Reference BIZ 700 183 Reference $ BIZ 700 598102Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross referenceNon-insulated spanners and screwdriversHand tools9 BALL-POINT HEXKEY CLIP SETDimensions: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 /8 / 10 mm.Supplied in a folding case for storage.Specifications:Chrome Vanadium steel."Protanium" molybdenum alloy.Rust-resistant polished finish.Weight with sleeve, 340 g.9 HEX KEY CLIP SETDimensions: 1.5 / 2 / 2.5 / 3 / 4 / 5 /6 / 8 / 10 mm.Supplied in a folding case forstorage.Specifications:Chrome vanadium steel.Burnished finish.Weight with case 340 g.BENEFITS• High torque.• Easy tightening even in confinedspaces with long stem and ballpoint.Hand toolsReference BIZ 700 230Reference BIZ 700 0637 HEX KEY FOLDING SETDimensions: 2 / 2.5 / 3 / 4 / 5 / 6 / 8 mm.Specifications:Chrome Vanadium steel.Weight: 171 g.8 TORX KEY FOLDING SETDimensions: T9 / T10 / T15 / T20 / T25 / T27 / T30 / T40.Specifications:Chrome Vanadium steel.Weight: 171 g.Reference BIZ 700 298 Reference BIZ 700 299103

Hand toolsNon-insulated spanners and screwdriversUNIVERSAL SWITCH KEYContaining:- square (5, 6, 7-8 mm),- triangle (9 mm),- bit-key (3-5 mm),- 1/4" flat bit (1.0 x 7 mm) and PH 2.Specifications:Dimensions: 72 x 72 mm.ELECTRICIAN’S PEN KEYBit storage in the body.Containing:- square (5, 6, 7-8 mm),- triangle (9 mm),- bit-key (3-5 mm),- 1/4" PH 2 bit.Specifications:Length: 145 mm.Weight: 120 g.SITE PEN KEYBit storage in the body.Containing:- square (5, 8 mm),- triangle (8 mm),- stepped male square (6-9 mm),- 1/4" PH 2 bit.Specifications:Length: 145 mm.Weight: 115 g.Reference BIZ 700 494Reference BIZ 700 495 Reference BIZ 700 496NON-INSULATED SCREWDRIVERSSpecifications:Polypropylene handle.Blade in chrome steel.RATCHET SCREWDRIVERTelescopic storage of seven bits in the handle.Magnetic bit holder 1/4" hex. (6.35 mm).Supplied with 81 / 4 ” (6.35 mm) drive 25 mm bits:- 3 slotted bits (4.5 x 0.6 mm / 5.5 x 1 mm / 6.5 x 1.2 mm).- 3 PH bits (no. 1, no. 2, no. 3).- 2 PZ bits (no. 1, no. 2).Specifications:Max. torque 24 Nm.Bits in chrome vanadium steel.Length: 220 mm.Weight 220 g.ReferenceDescription$ BIZ 700 574 Slotted 2.5 x 75$ BIZ 700 575 Slotted 3.5 x 100$ BIZ 700 576 Slotted 4 x 100$ BIZ 700 577 Slotted 5.5 x 125$ BIZ 700 578 Slotted 6.5 x 150$ BIZ 700 573 Slotted 8 x 150$ BIZ 700 581 Phillips 1 x 100$ BIZ 700 582 Phillips 2 x 125$ BIZ 700 583 Pozi 0 x 75$ BIZ 700 579 Pozi 1 x 100$ BIZ 700 580 Pozi 2 x 100How to use:3-positions ratchet:- ratchet screwing,- screwing without ratchet,- ratchet unscrewing.Reference BIZ 700 492104Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross referenceCutting, sawing and filing toolsHand toolsTRIMMING KNIVES AND SPARE BLADES■ Professional ergonomic trimming knifeAutomatic blade loading.Self-blocking blade.Blade locking system on the back for difficult jobs.Built-in blade snapper.Supplied with 4 blades.BIZ 700 187Reference BIZ 700 187■ Set of 10 blades for cutter BIZ 700 187Specifications:Blade width 18 mm.Reference BIZ 700 188BIZ 700 188■ Trimming knifeEquipped with a screw to block and release the blade.Specifications:Elastomer handle, stainless steel blade guide.Carbon steel blade, width 25 mm, thickness 7 mm, 6 snap-off sections.Weight: 120 g.Reference BIZ 700 069BIZ 700 069Hand tools■ Set of 10 blades for cutter BIZ 700 069Supplied in a rigid protective case.Specifications:Carbon steel blade, width 25 mm, thickness 0.7 mm,6 snap-off sections.Weight with case 170 g.Reference BIZ 700 070BIZ 700 070■ Safety knifeSupplied with 2-position trapezoidal blade.Specifications:Zinc alloy trimming knife with retractable blade, 150 mm.Carbon steel blade, thickness 0.6 mm.Weight: 103 g.Reference BIZ 700 040BIZ 700 040■ Set of 10 trapezoidal blades for cutter BIZ 700 040Specifications:Trapezoidal blade in carbon steel, thickness 0.6 mm.Reference BIZ 700 178BIZ 700 178105

Hand toolsCutting, sawing and filing toolsELECTRICIAN’S SCISSORSSupplied with storage pouch.Applications:For flexible cables max 22m 2 .Specifications:Carbon stainless steel notchedblade.Red fibre glass reinforcednylon handle.Length: 138 mm.Weight: 80 g.Reference BIZ 700 042SWEDISH KNIFESpecifications:Length: 150 mm.Blade hardness: HRC 55-57.Wood handle, leathersheath.Applications:For removing grommetsfrom plastic boxes.Reference $ BIZ 700 459ELECTRICIAN’S KNIFE2-blades knife (1 hooked and 1 straight).Specifications:Black ABS handle.MULTI-FUNCTION SHEARSSpecifications:Length: 210 mm.For cutting plastic (wiring ductsand retainers, etc.), smalldiameter electrical wires andcables (10 mm), rubber, leather,paper, etc…Reference BIZ 700 115Reference $ BIZ 700 279CABLE SNIPSApplications:For cutting electrical cables (type H07), tubes, wiring ducts and retainers,carton.Specifications:42 mm toothed polished stainless steel blade.Length: 190 mm.The essentialtool!BENEFITS• Light and easy to use.• Safety clips into closed position.Reference $ BIZ 700 524106Find all our products at www.bizline. pro

★NewproductImproved product>Cross referenceCutting, sawing and filing toolsHand toolsTIN SNIPSAutomatic opening ratchet and lever-assisted arms.Applications:For cutting sheet metal and stainless steel (false ceilings, electricalcabinets).For cutting 0.8 mm stainless steel and mild steel up to 1.2 mm thick.Specifications:Forged jaws in molybdenum chrome steel.42 mm micro-toothed blades with HRC 59-62 hardness.BOLT CUTTERSN°1.Capacity 10 mm dia.Specifications:Polished finish jaws.Length: 600 mm.Reference BIZ 700 211 Reference $ BIZ 700 313Hand toolsSET OF 8 PG/ ISO PUNCHESInstructions:Before using the punch, smear the screw with Bizline cutting paste(BIZ 700 293).■ Box of 8 hole cutters PG / ISO3-point cutting tips for easy cutting without rejects.Contains the following cutters and screws:- 15.2 mm / PG 9.- 16.5 mm / ISO 16.- 18.6 mm / PG 11.- 20.4 mm / PG 13 and ISO 20.- 22.5 mm / PG 16.- 25.4 mm / ISO 25.- 28.3 mm / PG 21.- 32.5 mm / ISO 32.- 1 burnished screw with reinforced ball bearing 10 x 1.0 x 50 mm.- 1 burnished screw with reinforced ball bearing 12 x 1.5 x 60 mm.Supplied with 30 g of cutting paste.Applications:2 mm cutting capacity in stainless steel and 3 mm in sheet iron.Specifications:High carbon steel.Weight 1.27 kg.Reference BIZ 700 294BENEFITS• Quick, easy cuttingwithout burrs.• Energy saving(Reduced by 67%).■ Hole cutter22.5 mm dia. / PG 16Supplied with ball bearing stopscrew.Reference BIZ 700 287■ Cutting paste 30 gReference BIZ 700 293107

Hand toolsCutting, sawing and filing toolsHACKSAW■ Mini-hacksawBlade for metal and wood.Specifications:Aluminium frame.Length: 150 mm.BENEFITS• Comfortable grip.• Blade adjustablefor angled cuts.METAL FILESApplications :Second cut metal file for finishing work.Specifications:High carbon high chrome steel.Reference $ BIZ 700 314■ Slim file 150 mmSpecifications:Dual-material handle.■ 30 cm HacksawReference BIZ 700 50745° and 90° cutting angles.Blades stored inside the handle.Blade tension adjustement.Supplied with 3 HSS bi-metal blades, 24 teeth per inch.Specifications:Aluminium frame with elastomer handle.Weight: 875 g.■ Standard file 200 mmSpecifications:Weight: 160 g.Reference BIZ 700 082Reference BIZ 700 035■ Set of 10 saw bladesSpecifications:HSS bi-metal, 24 teeth per inch.Weight 190 g.■ Chain file 150 mmSpecifications:Weight: 65 g.Reference BIZ 700 083Reference BIZ 700 036PADSAW FOR DRYWALLSSpecifications:Carbon steel blade, 1.2 mm thick.Wooden handle with suspension hole.Length: 160 mm.■ Engineer’s file 200 mmSpecifications:Dual-material handle.Weight: 195 g.Reference BIZ 700 175Reference $ BIZ 700 315108Find all our products at www.bizline. pro

★NewproductImproved product>Cross referenceMeasuring and marking toolsHand toolsTAPE MEASUREMetric graduations.Carrying strap.Specifications:Nylon covered yellowlacquered carbon steel tape.ABS case.Class II.Reference Description Case Tape Tolerance Hookwidth (mm) width (mm) (mm) fixingBIZ 700 060 3 m tape measure 63 16 0,9 Double rivetingBIZ 700 061 5 m tape measure 70 19 1,3 Triple rivetingBIZ 700 062 7 m tape measure 76 25 1,7 Triple riveting50 M FIBREGLASS TAPE MEASURENon-conductive, washable tape.The case and mechanism can be dismantled.Specifications:Fibreglass tape.ABS case with rubber handle.Steel rewind mechanism and crank.Class III (tolerance ± 20.6 mm in 50 m).BENEFITS• Ultra-fast rewind.• Return speed three timesfaster than an ordinary tape.Reference BIZ 700 205Hand toolsMAGNETICTAPE MEASURE30 CM STAINLESSSTEEL RULEShock-resistant structure.Graduations on both sides.Magnetic tip.Anti-reflective, water-resistant tape.Specifications:Reinforced case in ABS bi-material.Stainless steel screws.Nylon-treated steel tape.Tape width 25 mm.Class II.Reference $ BIZ 700 389Magnetic tipReference BIZ 700 505109

Hand toolsMeasuring and marking toolsVERNIER CALIPERWith Vernier scale and jaws for inside measurements.Graduation, 150 mm.Capacity, 150 mm.2 -METERS FOLDING RULENon-conductive metal ends.EC III embossed graduations with red decimals.Complies with European standards.Specifications:Fibreglass reinforced folding polyamide rule.Steel spring on each section.Width of sections 16 mm, 10 sections.BENEFIT• Reversed order graduations on the backfor ease of reading.Reference BIZ 700 506Reference BIZ 700 311DIGITAL VERNIER CALIPERPrecision: 1/100 th of mm.Units of measurement: metric and imperial.Supplied in its own box with one SR44 button cell.Specifications:Weight: 295 g.Dimensions: 245 x 90 x 26 mm.JOINERS SQUAREPrecision: 1/25 th .Specifications:Length: 150 mm.Width: 100 mm.Reference $ BIZ 700 398Reference $ BIZ 700 395110Find all our products at www.bizline. pro

★NewproductImproved product>Cross referenceMeasuring and marking toolsHand toolsELECTRICIAN’SPOCKET LEVELCan be positioned on the edge of the switch or socket.1 horizontal vial.Applications:For the quick alignment of flush switches and sockets.Specifications:Measurement precision: ± 1 mm.Rare earth magnet.Length: 7 cm.Width: 2 cm.Height: 4 cm.Reference $ BIZ 700 386BENEFIT• Magnet 5 times more powerful thana typical ferrite magnet.Hand tools25 CM MAGNETIC INSULATED LEVELSpecifications:Fibreglass reinforced ABS body.Circular Plexiglass (PMMA) vials.Total power of the magnets: 3 to 4 kg.Shock resistance: 5 kj / m.Dimensions: 250 x 43 x 22 mm.Reference BIZ 700 20680 CM MAGNETIC TRAPEZOIDAL LEVELWith two vials and a precision of 1.00 mm / metre.Base magnetic along the whole length, rounded edges.Specifications:Level in cast aluminium.Reference BIZ 700 31240 CM ALUMINIUM LEVELWith 3 vials.Specifications:Aluminium level.Dimensions: 400 x 50 x 20 mm.Weight: 240 g.Reference BIZ 700 044111

Hand toolsMeasuring and marking toolsSELF - LEVELINGCROSS-BEAM LEVELTwo laser lines: horizontal and vertical.Generates a cross.Shock-absorbing rubber casing.Internal lock-protect mechanism.May be used on tripod BIZ 700 388.Supplied with: storage pouch andinstruction manual.Applications:For the horizontal and verticalalignment of electrical sockets,switches, cables, pipes, worktops,wall coverings, radiator brackets.Specifications:Weight: 455 g.BENEFIT• Compact, easy to put ina tool box.TELEMETERFunctions:- Calculates areas and volumes,- Adds and subtracts,- Pythagoras function,- Tracking (continuous measurement),- Memory function.Backlit LCD screen, with spirit level for horizontal alignment.Measures using three reference points.1 / 4 ” threaded for tripod. May be used on tripod BIZ 700 388.Laser de-activates after 30 seconds and the device after 3 minutes of notbeing used.Supplied with a transport cover, wrist strap, 9V battery and instructionmanual.Applications:Measures lengths, areas and volumes.Specifications:Weight: 142 g.Reference $ BIZ 700 276Number of lines 2Range20 mPrecision± 0,2 mm/mSelf leveling range ± 5°Wavelength630 nm - 660 nmLineClass IIBattery type3 batteries 1.5V AAATRIPODMax. height 1.20 m.1 / 4 thread.Suitable for laser level.BIZ 700 276 and TelemeterBIZ 700 394.Reference $ BIZ 700 388BENEFITS• Requires little space.• Easy to use.• With robust shockabsorbingcasing.• Automatic switch-offfor battery saving.Reference $ BIZ 700 394Range50 mPrecision± 2 mm / 50 mUnits of measurementm / feetMeasurement time0,5 sec.Laser lineClass IIWavelength650 nmBattery life5000 measurementsBattery type1 9V batteryDimensions104,7 x 61 x 32 mm112Find all our products at www.bizline. pro

★NewproductImproved product>Cross referenceMeasuring and marking toolsHand toolsENGINEER’S PUNCHSCRIBERDouble-ended scriber.Diam. 4 mm.Specifications:Polished steel.Reference BIZ 700 073Reference $ BIZ 700 396AUTOMATIC CENTRE PUNCHApplications:Can be used on wood or metal.Specifications:Steel blade with polished finish.HRC 60 to 62.Chrome-plated body.Length: 110 mm.Body dia. 9.5 mm.Stem dia. 3 mm.Ideal forpilot holeand precisedrilling!Hand toolsHow to use:Place the tip on the point where the mark is required and presson the top of the body. The punch is released automaticallywhile ensuring a clean and accurate strike. Reference $ BIZ 700 397GIMLETSApplications:For marking a pilot hole in soft and medium soft materials (wood, plastic,etc.).Specifications:Made of steel.ReferenceBIZ 700 502BIZ 700 501DescriptionRolled ring awl, 4 mmRolled ring awl, 3 mm113

Hand toolsMeasuring and marking toolsMARKING LINE KITWinds four times quicker than a traditional line.Supplied with a blue powder refill, 120 g.Specifications:Red ABS case with black handle.Blue/white high strength polycotton line (17 kg), 30 metres.1 mm diam.Weight: 265 g.BENEFIT• Handle may be disengaged:simple pressure on thehandle shaft locks the line.Reference BIZ 700 037WORKSITE POWDERSFinely-balanced sodium carbonate, sulphurand silica refills for maximum adhesion ofthe powder to the line.Applications:Multiple indoor and outdoor applications,good weather resistance.How to use:Cleans off with soapy water on non-poroussurfaces.BENEFIT• High density, non-volatile powder fora perfectly clear line.Reference Description Weight (g) Powder Powder ApplicationscolourcompositionBIZ 700 295Yellow powder 140 Yellow Red iron oxide Use internally on plasterboardbefore paintingBIZ 700 296 Red powder 140 Red Red iron oxide Use outdoorsBIZ 700 038Blue powder 140 Blue Sodium carbonate, For interior andsulphur and silicaexterior use114Find all our products at www.bizline. pro

★NewproductImproved product>Cross referenceMeasuring and marking toolsHand toolsWORKSITE PAINT SPRAYSFluorescent (except for white) temporary worksite aerosol sprays.9-10 months depending on the support types and application conditions.High luminosity. Slow degradation of UV fluorescence due to high-qualityfluorescent pigments.Fast drying, even on damp supports.Can be used at low temperatures (-20°C).Products guaranteed free from CMR (Carcinogenic, Mutagenic, Reprotoxic)substances of category 1 & 2.Free from chlorinated solvents, lead-free, cadmium-free, non-irritant productharmless for the user, toluene and xylene free.Data sheet available on request: MSDS.Lifetime: 2 years storedin a dry place.BENEFIT• Safety cap: for BIZ 740 101 -BIZ 740 105 - BIZ 740 103 -BIZ 740 102 - BIZ 740 104.Reference Description Colour Suggested Use Contentsapplication(ml)BIZ 740 100 360° “all angle ceiling” Fluorescent pink Ceilings, floors, walls Multi-directional 500worksite aerosol sprayBIZ 740 101 Worksite aerosol spray Fluorescent blue Water Upside down 500BIZ 740 102 Worksite aerosol spray Fluorescent green Gas Upside down 500BIZ 740 103 Worksite aerosol spray Fluorescent yellow Miscellaneous Upside down 500BIZ 740 104 Worksite aerosol spray Fluorescent orange Electricity Upside down 500BIZ 740 105 Worksite aerosol spray Non-fluorescent white Miscellaneous Upside down 500Hand toolsPENCILSRed joiner’s pencil 18 cm.ReferenceBIZ 999 004BIZ 999 024MARKERSBlack indelible marker, waterand light resistant.Applications:Ideal for marking on whiteadhesive tape, plastic, stone,wood, metal, glass, etc.ReferenceBIZ 740 002BIZ 740 001DescriptionPencil eachSet of 5 pencilsDescriptionMarker eachWallet of 4 markersSPECIAL CABLE MARKING PENApplications:For writing on all types of material such as plastic, metal, glass, board.Specifications:0.8 mm metal tip.How to use:1. Shake the pen.2. Prime the pump by pressingseveral times on the writing surfacein the same place.Reference $ BIZ 700 399Ideal for writingon cablesand markingtapes.115

Hand toolsHammers and chiselsHAMMERSSpecifications:Polished ash handle. Head heat treatment by localised heating (induction).Epoxy powder finish.High resistance.■ Electrician’s hammer size 18Specifications:Length: 250 mm.Weight: 200 g.■ Riveting hammer size 30Specifications:Length: 280 mm.Weight: 400 g.■ Club hammer 1.25 kgSpecifications:Length: 260 mm.Weight: 1500 g.Reference BIZ 700 046 Reference BIZ 700 047 Reference BIZ 700 075POINTED CHISELEnlarged forged head for greater safety.Resharpenable and hardened tip.Specifications:Chrome steel.Hardened point.Dimensions: 300 x 16 mm.Weight: 480 g.COLD CHISELWith safety guard.Resharpenable on edges.Specifications:Chrome steel.Hardened edge.Dimensions: 300 x 16 mm.Weight: 500 g.Reference BIZ 700 105 Reference $ BIZ 700 584116Find all our products at www.bizline. pro

★NewproductImprovedproduct>Cross referenceSoldering ironsHand toolsGAS SOLDERING IRONEquivalent power: 30-125W.Heating time: 15 seconds.Bit temperature: 250-550°C.Reference BIZ 700 212BENEFITS• Gas canister for up to 200 minutes soldering (about 38 ml): max216, min 162 minutes).• Blow torch function for heatshrink tubes; simply undo the metalring.AccessoriesBIZ 700 460 BIZ 700 462 BIZ 700 464ReferenceDescriptionBIZ 700 460Conical tip with 1.6 mm pointBIZ 700 462 Deflector nozzle for heatshrink sleevingBIZ 700 464Spare jetHand toolsBUTANE GAS REFILLSpecifications:Highly inflammable.Net volume: 150 ml.Instructions: Do not use on live circuits.BENEFITS• Special gas mixture for refillinglighters and soldering irons.• Use upside down.Reference BIZ 700 213117

Hand toolsSoldering ironsSOLDER PUMPSpecifications:Nylon body and Teflon ® tip.Length: 21 cm.Max outer diameter 28 mm.How to use:1/ press the plunger down until it clicks intoposition.2/ bring the tip up to the desoldering point andrelease the plunger by pushing the button.The liquid solder is sucked into the pump.Maintenance:1/ unscrew the tip and remove the solder balls.2/ lubricate the inside of the body regularly.3/ change the tip regularly to ensure the plungerslides freely.BENEFITS• Double-sealed piston for highsuction power.• Non-recoil plunger for perfectstability during suction.• Simply unscrew the tip to change it.■ Spare tip for solderpump, BIZ 700 280Reference BIZ 700 280 Reference BIZ 700 281SOLDERDUAL POWER SOLDERING IRON■ Reel of solderSpecifications:Composition: Sn (tin 99.3% and Cu (copper)0.7%.ReferenceBIZ 700 099BIZ 700 100Thickness10/10 (1 mm)20/10 (2 mm)■ Dual power 20W / 40W soldering iron forelectronic and electrical workSupplied with straight bit.Specifications:Maximum bit temperature 420°C.Weight: 120 g.Reference BIZ 700 098■ Straight bit for dual power soldering ironBIZ 700 098Specifications:Material: Nickel-plated copper.Length: 75 mm.Diameter: 10 mm.Reference BIZ 700 114118Find all our products at www.bizline. pro

Hand toolsElectrical inspection and testing devices4000 PTS DIGITAL MULTIMETERDigital display.Backlit screen.EC declaration of conformity.Meets IEC 61010, cat III 600V.Supplied with two measuring probes, one temperature probe,One 9V battery and an instruction manual.Applications:Measures voltage, resistance and current.BENEFITS• Easy to use.• Compact and shock-resistant casing.Specifications $ BIZ 780 012Digital display counts4000 ptsVoltage DC 600V (± 0.5 %)Voltage AC 600V (± 1.2 %)Current DC 10A (± 2.5 %)Current AC 10A (± 3 %)Resistance 40 Mega ohm (± 0.8 %)Diode checkyesAudible continuity testyesCapacitance 100 microfarads (± 3 %)Frequency 10 MHz (± 1.5 %)Selectionauto and manual rangeNon-contact ACV detectionyesGuarantee1 yearPower1 9V batteryCLAMP METEREC declaration of conformity.Meets IEC 61010, cat III 600V.Supplied with carry case, 2 batteries, two measuring probes and usermanual.Applications:Checking for the presence of load current, AC voltage and continuity.Specifications:Weight: 220 g.Dimensions: 210 x 75.6 x 30 mm.Specifications $ BIZ 780 013Digital display counts1999 ptsVoltage DC 200 mV - 600 V (± 0.8% +1)Voltage AC 2 V - 600 V (± 1.2% +5)Current AC 2A - 400A (± 1.5% +5)Resistance 200 Ohm - 20 Mega Ohm (± 1% +2)Diode checkyesAudible continuity testyesGuarantee1 yearPower2 x 1.5V batteries (type AAA)120Find all our products at www.bizline. pro

★NewproductImprovedproduct>Cross referenceTool storageHand toolsDRAWER UNITS■ Carrying plastic drawer unit■ Fixed metal drawer unit15-drawer carry box with separators.With carry handle.Specifications:Body and drawers: polypropylene.H x L x W (mm): 325 x 140 x 315.Weight (kg): 0.4.34-drawer fixed unit. Free-standing or fixed (screws not included).Specifications:Body : metal.Drawers: polypropylene.H x L x W (mm): 375 x 147 x 306.Weight (kg): 3.3.Reference $ BIZ 700 482 Reference $ BIZ 700 480Hand toolsDIVIDED TRAY CASECASE WITH 4 STORAGE TRAYSWith 20 compartments. Red body with translucent lid.Specifications:Body: polypropylene.Lid: Polycarbonate.H x L x W (mm): 79 x 413 x 330.Supplied empty.Practicaland strongStorage case with carry handle.Supplied with:- 2 trays with 12 compartments,- 1 tray with 14 compartments,- 1 tray with 16 compartments.Specifications:Case:Body: polypropylene.H x L x W (mm): 310 x 375 x 265.Tray:Black body: polypropylene.Translucent lid: Polycarbonate.H x L x W (mm): 57 x 340 x 265.Supplied empty.Light androbustReference BIZ 700 223Reference BIZ 700 220BENEFIT• Can be fixed to the wall.121

Hand toolsTool storageTOOL BELT15-compartment belt:- Two storage pockets for tools, each withfive compartments.- Two pockets for screws and nails.- Two retention loops for electrician’s orriveting hammer.- One tape measure clip.Specifications:600 denier polyester.Supplied without tools.Reference BIZ 700 228WOVEN TOOL BAGSFor intensiveuse■ La Costabelle■ Electrician’s woven bagWoven bag with central pocket. Base lined inside and out with rigid rubber.Reinforced zip fastening. Supplied with shoulder strap.Specifications:600 denier polyester.H x L x W (mm): 320 x 440 x 230.Reference BIZ 700 226Woven tool bag. Reinforced sides and base.With multiple pockets, side fixing loops for carrying bulky tools (levels,saws, drawings, etc,) tape measure clip and T-chain for adhesives.With foam-covered steel carry handle. Supplied with shoulder strap.Specifications:600 denier polyester.H x L x W (mm): 264 x 205 x 420.Reference BIZ 700 229122Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross referenceTool storageHand toolsPLASTIC TOOL BOXESLockable polypropylene tool boxes.Supplied with inner tray, without tools.■ Standard tool boxTool box with storage compartment for small parts in the lid (plugs, screws,fastenings, etc.).Specifications:Max. weight kg. 8.H x L x W (mm): 180 x 400 x 200.Reference $ BIZ 700 484■ Ultra-strong tool boxTool box with two storage boxes for small parts in the lid (plugs,screws, fastenings, etc.).Hand toolsSpecifications:H x L x W (mm): 254 x 508 x 254.Reference $ BIZ 700 221■ Multi-storage tool boxTool box with two storage drawers and six compartments.Specifications:H x L x W (mm): 248 x 474 x 239.Reference $ BIZ 700 222METAL TOOL BOXTool box in 8/10 sheet steel.5 compartments.Specifications:H x L x W (mm): 450 x 200 x 200.Colour: red.Reference BIZ 700 107123

Hand toolsTool storageTOOL CASESBlack ABS shell. Aluminium frame. Removable bottom storage.With two tool-carrier panels.Separate document plate in the lid.1 set of two keys.Supplied without tools.■ Tool caseKey lockable.Supplied with shoulder strap.Specifications:D x L x W (mm): 310 x 180 x 460.Reference $ BIZ 700 064> CABLE STRIPPERSANDCUTTERSSee page 95■ Trolley tool caseTool case on wheels with telescopichandle.Double locking: key and combination.Specifications:D x L x W (mm): 220 x 360 x 470.Reference $ BIZ 700 481124Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross referenceTool storageHand toolsTOOL SETS■ Black ABS case of 17 toolsBlack ABS case (BIZ 700 064) with:One cable tie fitting tool (BIZ 700 010) ;One 1000V insulated flat screwdriver 2.5 x 75 (BIZ 700 014);One 1000V insulated flat screwdriver 3 x 100 (BIZ 700015);One 1000V insulated flat screwdriver 4 x 100 (BIZ 700016);One 1000V insulated flat screwdriver 5.5 x 125 (BIZ 700 017);One 1000V insulated flat screwdriver 6.5 x 150 (BIZ 700 018);One 1000V insulated Pozidriv screwdriver 1- 4.5 x 80 (BIZ 700 019);One 1000V insulated Pozidriv screwdriver 2- 6 x 100 (BIZ 700 020);One 1000V insulated stripping plier, 160 mm (BIZ 700 023);One 1000V insulated diagonal cutter, 160 mm (BIZ 700 026);One 1000V insulated long-nose plier, 160 mm (BIZ 700 027);One 1000V insulated bent, long-nose plier, 160 mm (BIZ 700 028);One pair of 1000V insulated electrician’s shears (BIZ 700 042);One electrician’s hammer, 200g (BIZ 700 046);One cable stripper (BIZ 700 052);One 5 m tape measure (BIZ 700 061);One voltage detector (BIZ 780 010).Reference BIZ 700 096■ Box of 14 toolsPlastic tool box (BIZ 700 221) with:One cable tie fitting tool (BIZ 700 010);One 1000V insulating flat screwdriver 2.5 x 75 (BIZ 700,014);One 1000V insulating flat screwdriver 3 x 100 (BIZ 700,015);One 1000V insulating flat screwdriver 4 x 100 (BIZ 700,016);One 1000V insulating flat screwdriver 5.5 x 125 (BIZ 700,017);One 1000V insulating flat screwdriver 6.5 x 150 (BIZ 700 018);One 1000V insulated Pozidriv screwdriver 1- 4.5 x 80 (BIZ 700,019);One 1000V insulated Pozidriv screwdriver 2- 6 x 100 (BIZ 700 020);One 1000V insulated stripping plier, 160 mm (BIZ 700 023);One 1000V insulated diagonal cutter, 160 mm (BIZ 700 026);One 1000V insulated long-nose plier, 160 mm (BIZ 700 027);One electrician’s hammer, 200g (BIZ 700 046);One cable stripper (BIZ 700 052);One 5 m tape measure (BIZ 700 061).Reference BIZ 700 227The must-haveThe essentialHand toolsSTORAGE BOXWITH BUILT-IN LIDStackable, nesting box with double flap lid.Specifications:Material: Recycled polypropylene.Colour: Anthracite grey.H x L x W (mm): 365 x 600 x 400.Max. load kg. 66.Weight empty (kg): 3.5.Volume (L): 65.Reference BIZ 700 520125

Hand toolsTool storage“Optimum’’ workshop storageSpecially designed for workshop storage, Bizline workshop range providesmaximum modularity for minimum space consumption.- Modular: you adapt the number and type of units, shelves and storageunits to suit your needs.- Progressive: you can fix different types of unit to the side or on top.- Economical: you don’t have to order what you don’t need. Made entirelyof 10/10 sheet steel, finished in epoxy paint, it adapts to every need andevery storage situation.The customizedsolution !UNITSABEmpty units, supplied without shelf. Can take up to five fixed or sliding shelves.3-drawer unit supplied with two keys.Specifications:Steel sheet thickness (mm) 10/10e.Dimensions of units (mm): 800 x 600 x 350.Colour: RAL 7001.Instructions:Stack up to 3 units, or to a recommended height of 1,80 metres max. (without feet).Always use a 3-drawer unit in the lower position.See assembly instructions.ABIZ 730 902BBIZ 730 901Reference Description LxHxD Max. load Max. load Drawer usable(mm) per drawer per shelf LxHxDkg. kg. (mm)A $ BIZ 730 902 Simple unit 800 x 600 x 350 N/A 45 N/AB $ BIZ 730 901 3-drawer unit 800 x 600 x 350 45 N/A 708 x 172 x 269126Find all our products at www.bizline.pro

★NewproductImprovedproduct>Cross referenceTool storageHand toolsSHELVESShelves for simple units: fixed or sliding in 10/10 sheet steel.Shelves may be divided: BIZ 730 908 (Shelf separator, sold individually).7 separators per shelf maximum.Specifications:Max. load (kg). 45.Colour: RAL 3002.Reference Description Shelf Typeusable(mm)$ BIZ 730 903 Sliding shelf 708 x 331 Slidingwith handle$ BIZ 730 904 Fixed shelf 742 x 331 FixedTHREADED ROD KITSet of two items for storingthreaded rods.SEPARATORS■ Shelf separatorLongitudinal separator for fixed orsliding shelf.Specifications:Colour: RAL 3002.Sold individually.Reference $ BIZ 730 908■ Drawer separator kitLot of 14 separators for3 drawers unit.Composition:- 4 longitudinal separators;- 4 intermediate separators;- 6 small separators.Specifications:Colour: RAL 3002.Sold in a pack of 14.Hand toolsHow to use:Fix the lower part of the kit to thelowest unit.Fix the upper part of the kit to thefirst or second unit (maximum ofthree stacked units).Specifications:Colour RAL 7001.Instructions:Refer to assembly instructions.Reference $ BIZ 730 907KIT OF 10 HOOKSLot of 10 hooks for fitting tothe side walls of the simple or3-drawer units.Specifications:Length (mm) : 50.Reference $ BIZ 730 910Reference $ BIZ 730 909BACK PANELBizLine back panel.Specifications:Colour: RAL 7001.Reference $ BIZ 730 911SET OF TWO WALL BRACKETSSet of two depth-adjustable wall brackets.Specifications:Colour: RAL 7001.Supplied without wall fixings.Instructions: Recommended for use with a column of two or more units.Strongly recommended for use with a column of 3 units. Adapt the fixingsdepending on the support structure.Reference $ BIZ 730 906SET OF FOUR ADJUSTABLE FEETSet of four feet for single or 3-drawer unit.Specifications:Max. load (kg): 450.Reference $ BIZ 730 905127