Hand tools - Bizline

More documents

Recommendations

Info

Hand tools1000Vinsulated tools p. 90Pliers,cable strippersand cutters p. 92Crimping tools p. 98Non-insulatedspannersand screwdrivers p. 100Cutting, sawingand filing tools p. 105Hand toolsMeasuringand marking tools p. 109Hammersand chisels p. 116Soldering irons p. 117Electricalinspectionand testing devices p. 119Tool storage p. 12187
Hand tools1000V insulated toolsA range of tools that guarantees your safety!1. Reminder on the use of 1000V insulated tools.- Before starting any work on live circuit, ensure that you have the correct individual protective equipment, conforming to relevant standards:insulating gloves and protective visor.- Check the marking on tools.- Store insulated tools separately to avoid any mechanical damage.- Check each tool visually before use. Change the tool if it is damaged, cut or worn.2. Tools complying with IEC 60900: 2004:Each tool is individually tested as follows:a - Impact test:After the tool has been submittedat a temperature of -25°C during2 hours, the impact tests arecarried out on 3 points of theinsulating material.No signs of cracking or tearingmust be visible.b - Dielectric test:After immersion in a water tank for24 hours and then drying, 10kV areapplied for 3 minutes between thesteel and the insulated points. Noarking, no flashover or breakdownshall occur during the test.d - Insulation adhesiontest:After 168 hr in an enclosure at70°C, a force is applied for3 minutes to check the adhesion ofthe insulation to the steel. Noloose or tearing must be visible.e - Non-propagationflame test:The tool is submitted to flame for10 sec. Its propagation is observedfor 20 sec. and must not exceed a120 mm height.c - Penetration test:Test carried out on the mostvulnerable part of the tool after2 hours in an enclosure at 70°C. A5 kV live circuit is then applied for3 min. No perforation, ignition orbypassing should be seen.f - Individual productiontest:Each tool is visually checked andsubmitted to a 10 kV live circuit for10 sec.3. Marking complying with IEC 60900: 2004:- Product reference: e.g. BIZ 700 487- Production date: e.g. 09 (for 2009)- Symbol IEC 60900: 2004- Double triangle with 1000V indication, certifying the product compliance with IEC 60 900.88Find all our products at www.bizline.pro
Page 4 and 5: ★NewproductImprovedproduct>Cross
Page 22 and 23: ★NewproductImproved product>Cross
Page 35 and 36: Hand toolsElectrical inspection and
Page 37 and 38: Hand toolsTool storageTOOL BELT15-c
Page 39 and 40: Hand toolsTool storageTOOL CASESBla
Page 41 and 42: Hand toolsTool storage“Optimum’

Hand tools - Bizline

Create successful ePaper yourself

Delete template?

Save as template?