Hand tools - Bizline

★NewproductImprovedproduct>Cross ReferenceCrimping toolsHand toolsADAPTABLE CRIMPING PLIERS■ Empty adaptable crimping pliers for use with interchangeable dies.Crimping in compliance with standards EN 60352-2, EN 60999-1 and UL 486A.Tested over 2000 crimping cycles.Reference BIZ 700 260BENEFITS• Parallel crimping with approx. 1,000 kg (10,000 N) ofcontact pressure.• A single tool for 90% of connectors.• Release system for quick and easy replacement ofdies without special tool.• Upper and lower dies attached, so they cannot be lost.• Compact tool, easy to carry.■ Crimping interchangeable diesSpecifications:High resistance phosphate finish steelcrimping dies.(HRC 35 – 55 / HV 450 – 515).Hand toolsBIZ 700 261 BIZ 700 264 BIZ 700 265 BIZ 700 266 BIZ 700 267Reference Applications: Conductor size crimping rangeBIZ 700 261 Die for insulated and non-insulated cable ends 0.25 to 10 mm 2BIZ 700 262 Die for insulated and non-insulated cable ends 16 to 25 mm 2BIZ 700 263 Die for Pre-insulated terminals (lugs, clips, crimps) 0.5 to 2.5 mm 2BIZ 700 264 Die for Pre-insulated terminals (lugs, clips, crimps) 0.1 to 0.4 / 4 to 6 mm 2BIZ 700 265 Die for high voltage copper terminals lugs 4 to 10 mm 2BIZ 700 266 Die for receptacles 0.5 to 6 mm 2BIZ 700 267 Die for computer connectors RJ45 8/8BIZ 700 268 Die for coaxial computer connectors RJ11 6/6, 6/4, 6/2BIZ 700 269 Die for coaxial computer connectors CATV RJ6 / RJ59BIZ 700 270 Die for coaxial computer connectors BNC RJ58 / RJ59 / RJ62 / RJ71DIE AND CRIMPINGTOOL KITFOR 0.25 TO 10 MM 2CABLE ENDSKit contains:- 1 adjustable crimping pliersBIZ 700 260 for interchangeabledies.- 1 die for cable ends from 0.25 to10 mm 2 (BIZ 700 261).STORAGE BOX FOR ADAPTABLECRIMPING PLIERBox with double foam inside.Storage for crimping pliers and 10 dies.Reference BIZ 700 271Reference BIZ 700 27299