Procedural Lab Template, Student Version, Required Components

CCNA ExplorationAccessing the WAN: Skills Based AssessmentStudent Skills based Assessment LabR3:R3(config)#interface fastEthernet0/1R3(config-if)#ip address 10.0.0.129 255.255.255.128R3(config-if)#no shutdownR3(config-if)#exitR3(config)#interface Serial0/0/0R3(config-if)#ip address 172.16.0.10 255.255.255.252R3(config-if)#clock rate 64000R3(config-if)#no shutdownR3(config-if)#exitR3(config)#interface Serial0/0/1R3(config-if)#ip address 172.16.0.6 255.255.255.252R3(config-if)#no shutdownR3(config-if)#endR3#show ip interface briefTask 4: Configure Serial InterfacesStep 1: Configure and verify PPP encapsulation with CHAP authentication between R1 and R2. Thepassword is “cisco”.Step 2: Configure and verify HDLC encapsulation between R2 and R3.Step 3: Configure Frame Relay between R1 and R3.R1:R1#configure terminalR1(config)#username R2 password ciscoR1(config)#interface Serial0/0/0R1(config-if)#encapsulation pppR1(config-if)#ppp authentication chapR1(config-if)#exitR1(config)#interface Serial0/0/1R1(config-if)#encapsulation frame-relayR1(config-if)#frame-relay map ip 172.16.0.9 101 broadcastR1(config-if)#frame-relay map ip 172.16.0.10 101 broadcastR1(config-if)#frame-relay interface-dlci 101R1(config-if)#no keepaliveR1(config-if)#endR1#show interface Serial0/0/0R1#show interface Serial0/0/1R3#show frame-relay pvcR3#show frame-relay mapR2:R2#configure terminalR2(config)#username R1 password ciscoR2(config)#interface Serial0/0/0R2(config-if)#encapsulation pppAll contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 9